mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Roland Hieber <r.hieber@pengutronix.de>
To: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v4 4/7] serial_ns16550: add raspberry pi compatible and init
Date: Tue, 18 Dec 2018 04:29:37 +0100	[thread overview]
Message-ID: <20181218032937.otaph6c5yo3lxny7@pengutronix.de> (raw)
In-Reply-To: <1ce9b3de1464acae378eaaae5324b724d187f1a6.1545034218.git-series.r.czerwinski@pengutronix.de>

On Mon, Dec 17, 2018 at 09:10:42AM +0100, Rouven Czerwinski wrote:
> Add the compatible for the Raspberry Pi AUX UART and an init function which
> enables it via the aux register and configures the correct shift value.
> 
> Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> ---
>  drivers/serial/serial_ns16550.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
> index 8ddcfdb..256063a 100644
> --- a/drivers/serial/serial_ns16550.c
> +++ b/drivers/serial/serial_ns16550.c
> @@ -253,6 +253,20 @@ static void ns16550_jz_init_port(struct console_device *cdev)
>  	ns16550_serial_init_port(cdev);
>  }
>  
> +static void rpi_init_port(struct console_device *cdev)
> +{
> +	struct ns16550_priv *priv = to_ns16550_priv(cdev);
> +
> +	writeb(0x01, 0x3f215004);

Same here. I guess it is some register that has to do with the ns16550?
But what happens when we write 1 to it?

 - Roland

> +	priv->plat.shift = 2;
> +	/*
> +	 * We double the clock rate since the 16550 will divide by 16
> +	 * (instead of 8 required by the BCM2835 peripheral manual)
> +	 */
> +	priv->plat.clock = priv->plat.clock*2;
> +	ns16550_serial_init_port(cdev);
> +}
> +
>  /*********** Exposed Functions **********************************/
>  
>  /**
> @@ -353,6 +367,11 @@ static __maybe_unused struct ns16550_drvdata tegra_drvdata = {
>  	.linux_console_name = "ttyS",
>  };
>  
> +static __maybe_unused struct ns16550_drvdata rpi_drvdata = {
> +	.init_port = rpi_init_port,
> +	.linux_console_name = "ttyS",
> +};
> +
>  static int ns16550_init_iomem(struct device_d *dev, struct ns16550_priv *priv)
>  {
>  	struct resource *iores;
> @@ -528,6 +547,12 @@ static struct of_device_id ns16550_serial_dt_ids[] = {
>  		.data = &jz_drvdata,
>  	},
>  #endif
> +#if IS_ENABLED(CONFIG_MACH_RPI_COMMON)
> +	{
> +		.compatible = "brcm,bcm2835-aux-uart",
> +		.data = &rpi_drvdata,
> +	},
> +#endif
>  	{
>  		/* sentinel */
>  	},
> -- 
> git-series 0.9.1
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Roland Hieber                     | r.hieber@pengutronix.de     |
Pengutronix e.K.                  | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2018-12-18  3:29 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-17  8:10 [PATCH v4 0/7] Raspberry Pi miniuart support Rouven Czerwinski
2018-12-17  8:10 ` [PATCH v4 1/7] ARM: rpi: move clks into board specific rpi-common Rouven Czerwinski
2018-12-17  8:10 ` [PATCH v4 2/7] ARM: rpi: retrieve miniuart clock from firmware Rouven Czerwinski
2018-12-18  3:26   ` Roland Hieber
2018-12-18  7:17     ` Sascha Hauer
2018-12-18  7:21   ` Sascha Hauer
2018-12-18  8:39     ` Rouven Czerwinski
2018-12-18  8:45       ` Sascha Hauer
2018-12-17  8:10 ` [PATCH v4 3/7] serial_ns16550: handle default reg-io-width Rouven Czerwinski
2018-12-17  8:10 ` [PATCH v4 4/7] serial_ns16550: add raspberry pi compatible and init Rouven Czerwinski
2018-12-18  3:29   ` Roland Hieber [this message]
2018-12-17  8:10 ` [PATCH v4 5/7] ARM: rpi: add NS16550 support Rouven Czerwinski
2018-12-17  8:10 ` [PATCH v4 6/7] ARM: rpi: choose miniuart as stdout Rouven Czerwinski
2018-12-17  8:10 ` [PATCH v4 7/7] doc: bcm283x: remove miniuart overlay instruction Rouven Czerwinski
2018-12-17 10:13 ` [PATCH v4 0/7] Raspberry Pi miniuart support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181218032937.otaph6c5yo3lxny7@pengutronix.de \
    --to=r.hieber@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=r.czerwinski@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox