mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 13/21] reset: imx7: Fix always writing bits as 0
Date: Tue,  8 Jan 2019 23:12:02 -0800	[thread overview]
Message-ID: <20190109071210.18896-14-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190109071210.18896-1-andrew.smirnov@gmail.com>

Port of a Linux commit 26fce0557fa639fb7bbc33e31a57cff7df25c3a0

  Right now the only user of reset-imx7 is pci-imx6 and the
  reset_control_assert and deassert calls on pciephy_reset don't toggle
  the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing
  1 or 0 respectively.

  The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for
  other registers like MIPIPHY and HSICPHY the bits are explicitly
  documented as "1 means assert, 0 means deassert".

  The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN.

  Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
  Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
  Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/reset/reset-imx7.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
index c8b7f86d4..6dc5de16a 100644
--- a/drivers/reset/reset-imx7.c
+++ b/drivers/reset/reset-imx7.c
@@ -82,7 +82,7 @@ static int imx7_reset_set(struct reset_controller_dev *rcdev,
 {
 	struct imx7_src *imx7src = to_imx7_src(rcdev);
 	const struct imx7_src_signal *signal = &imx7_src_signals[id];
-	unsigned int value = 0;
+	unsigned int value = assert ? signal->bit : 0;;
 
 	switch (id) {
 	case IMX7_RESET_PCIEPHY:
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-01-09  7:13 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-09  7:11 [PATCH 00/21] PCIe support for i.MX7 Andrey Smirnov
2019-01-09  7:11 ` [PATCH 01/21] regulator: Convert drivers to use struct regulator_desc Andrey Smirnov
2019-01-09  7:11 ` [PATCH 02/21] regulator: Port basic regmap regulator functions Andrey Smirnov
2019-01-09  7:11 ` [PATCH 03/21] regulator: Add support for setting regulator's voltage Andrey Smirnov
2019-01-09  7:11 ` [PATCH 04/21] base: driver: Drop redundant list_empty() check Andrey Smirnov
2019-01-09  7:11 ` [PATCH 05/21] base: Port driver_deferred_probe_check_state() from Linux Andrey Smirnov
2019-01-09  7:11 ` [PATCH 06/21] regulator: Add primitive support for deferred probe Andrey Smirnov
2019-01-09  7:11 ` [PATCH 07/21] regulator: Port ANATOP driver from Linux Andrey Smirnov
2019-01-09  7:11 ` [PATCH 08/21] drivers: base: Port power management code " Andrey Smirnov
2019-01-09  7:11 ` [PATCH 09/21] soc: imx: Add GPCv2 power gating driver Andrey Smirnov
2019-01-09  7:11 ` [PATCH 10/21] soc: imx: gpcv2: fix regulator deferred probe Andrey Smirnov
2019-01-10  7:37   ` Sascha Hauer
2019-01-10 19:20     ` Andrey Smirnov
2019-01-09  7:12 ` [PATCH 11/21] soc: imx: gpcv2: correct PGC offset Andrey Smirnov
2019-01-09  7:12 ` [PATCH 12/21] reset: Add i.MX7 SRC reset driver Andrey Smirnov
2019-01-09  7:12 ` Andrey Smirnov [this message]
2019-01-10  7:38   ` [PATCH 13/21] reset: imx7: Fix always writing bits as 0 Sascha Hauer
2019-01-09  7:12 ` [PATCH 14/21] reset: Mark local functions as static Andrey Smirnov
2019-01-09  7:12 ` [PATCH 15/21] PCI: imx6: Add code to support i.MX7D Andrey Smirnov
2019-01-09  7:12 ` [PATCH 16/21] PCI: imx6: Allow probe deferral by reset GPIO Andrey Smirnov
2019-01-10  8:05   ` Sascha Hauer
2019-01-12  4:24     ` Andrey Smirnov
2019-01-09  7:12 ` [PATCH 17/21] PCI: imx6: Do not wait for speed change on i.MX7 Andrey Smirnov
2019-01-09  7:12 ` [PATCH 18/21] PCI: imx6: Do not switch speed if Gen2 is disabled Andrey Smirnov
2019-01-09  7:12 ` [PATCH 19/21] PCI: imx6: Fix spelling mistake: "contol" -> "control" Andrey Smirnov
2019-01-09  7:12 ` [PATCH 20/21] PCI: imx6: Drop unnecessary root_bus_nr setting Andrey Smirnov
2019-01-09  7:12 ` [PATCH 21/21] PCI: imx6: Port imx6_pcie_ltssm_enable() Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190109071210.18896-14-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox