mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 8/8] mci: imx-esdhc: Add layerscape support
Date: Wed,  6 Feb 2019 08:49:21 +0100	[thread overview]
Message-ID: <20190206074921.11115-9-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20190206074921.11115-1-s.hauer@pengutronix.de>

This adds support for the esdhc controller found on Layerscape SoCs.
This means adding the compatible and a driver data to access the
controller in bigendian mode.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mci/Kconfig     |  2 +-
 drivers/mci/imx-esdhc.c | 11 +++++++++++
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 954f957bc7..2075151d67 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -82,7 +82,7 @@ config MCI_IMX
 
 config MCI_IMX_ESDHC
 	bool "i.MX esdhc"
-	depends on ARCH_IMX
+	depends on ARCH_IMX || ARCH_LAYERSCAPE
 	help
 	  Enable this entry to add support to read and write SD cards on a
 	  Freescale i.MX25/35/51 based system.
diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c
index 58c262782f..10c981ad5d 100644
--- a/drivers/mci/imx-esdhc.c
+++ b/drivers/mci/imx-esdhc.c
@@ -69,6 +69,8 @@
 #define ESDHC_FLAG_HAVE_CAP1		BIT(6)
 /* Need to access registers in bigendian mode */
 #define ESDHC_FLAG_BIGENDIAN		BIT(7)
+/* Enable cache snooping */
+#define ESDHC_FLAG_CACHE_SNOOPING	BIT(8)
 
 /*
  * The IP has errata ERR004536
@@ -612,6 +614,10 @@ static int esdhc_init(struct mci_host *mci, struct device_d *dev)
 	/* RSTA doesn't reset MMC_BOOT register, so manually reset it */
 	esdhc_write32(host, SDHCI_MMC_BOOT, 0);
 
+	/* Enable cache snooping */
+	if (host->socdata->flags & ESDHC_FLAG_CACHE_SNOOPING)
+		esdhc_write32(host, 0x40c, 0x40);
+
 	/* Set the initial clock speed */
 	set_sysctl(mci, 400000);
 
@@ -747,6 +753,10 @@ static struct esdhc_soc_data usdhc_imx6sx_data = {
 	.clkidx = "per",
 };
 
+static struct esdhc_soc_data esdhc_ls_data = {
+	.flags = ESDHC_FLAG_MULTIBLK_NO_INT | ESDHC_FLAG_BIGENDIAN,
+};
+
 static __maybe_unused struct of_device_id fsl_esdhc_compatible[] = {
 	{ .compatible = "fsl,imx25-esdhc",  .data = &esdhc_imx25_data  },
 	{ .compatible = "fsl,imx50-esdhc",  .data = &esdhc_imx53_data  },
@@ -756,6 +766,7 @@ static __maybe_unused struct of_device_id fsl_esdhc_compatible[] = {
 	{ .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data },
 	{ .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data },
 	{ .compatible = "fsl,imx8mq-usdhc", .data = &usdhc_imx6sx_data },
+	{ .compatible = "fsl,ls1046a-esdhc",.data = &esdhc_ls_data  },
 	{ /* sentinel */ }
 };
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-02-06  7:49 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-06  7:49 [PATCH 0/8] MMC: esdhc: Add Layerscape support Sascha Hauer
2019-02-06  7:49 ` [PATCH 1/8] mci: imx-esdhc: Do not reset twice Sascha Hauer
2019-02-06  7:49 ` [PATCH 2/8] mci: imx-esdhc: use dev_id Sascha Hauer
2019-02-06  7:49 ` [PATCH 3/8] mci: imx-esdhc: move platform_data Sascha Hauer
2019-02-06  7:49 ` [PATCH 4/8] mci: imx-esdhc: make clkidx configurable Sascha Hauer
2019-02-06  7:49 ` [PATCH 5/8] mci: imx-esdhc: remove unnecessary include Sascha Hauer
2019-02-06  7:49 ` [PATCH 6/8] mci: imx-esdhc: implement static inline io wrappers Sascha Hauer
2019-02-07  0:55   ` Andrey Smirnov
2019-02-07  7:56     ` Sascha Hauer
2019-02-06  7:49 ` [PATCH 7/8] mci: imx-esdhc: Add bigendian register access support Sascha Hauer
2019-02-06  7:49 ` Sascha Hauer [this message]
2019-02-07  1:02   ` [PATCH 8/8] mci: imx-esdhc: Add layerscape support Andrey Smirnov
2019-02-12  8:42     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190206074921.11115-9-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox