mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 11/16] net/e1000: Make use of readl_poll_timeout() in e1000_transmit()
Date: Wed,  6 Feb 2019 17:22:09 -0800	[thread overview]
Message-ID: <20190207012214.5060-12-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190207012214.5060-1-andrew.smirnov@gmail.com>

Simplify code of e1000_transmit() with readl_poll_timeout().

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/net/e1000/main.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/net/e1000/main.c b/drivers/net/e1000/main.c
index 866d8def3..425d478ed 100644
--- a/drivers/net/e1000/main.c
+++ b/drivers/net/e1000/main.c
@@ -33,6 +33,7 @@ tested on both gig copper and gig fiber boards
 #include <init.h>
 #include <malloc.h>
 #include <linux/pci.h>
+#include <linux/iopoll.h>
 #include <dma.h>
 #include "e1000.h"
 #include <io-64-nonatomic-lo-hi.h>
@@ -3415,9 +3416,9 @@ static int e1000_transmit(struct eth_device *edev, void *txpacket, int length)
 {
 	struct e1000_hw *hw = edev->priv;
 	struct e1000_tx_desc *txp = &hw->tx_base[hw->tx_tail];
-	uint64_t to;
 	dma_addr_t dma;
-	int ret = 0;
+	uint32_t stat;
+	int ret;
 
 	hw->tx_tail = (hw->tx_tail + 1) % 8;
 
@@ -3433,16 +3434,11 @@ static int e1000_transmit(struct eth_device *edev, void *txpacket, int length)
 
 	e1000_write_flush(hw);
 
-	to = get_time_ns();
-	while (1) {
-		if (readl(&txp->upper.data) & E1000_TXD_STAT_DD)
-			break;
-		if (is_timeout(to, MSECOND)) {
-			dev_dbg(hw->dev, "e1000: tx timeout\n");
-			ret = -ETIMEDOUT;
-			break;
-		}
-	}
+	ret = readl_poll_timeout(&txp->upper.data,
+				 stat, stat & E1000_TXD_STAT_DD,
+				 MSECOND / USECOND);
+	if (ret)
+		dev_dbg(hw->dev, "e1000: tx timeout\n");
 
 	dma_unmap_single(hw->dev, dma, length, DMA_TO_DEVICE);
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-02-07  1:22 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-07  1:21 [PATCH 00/16] E1000 driver AArch64 related fixes Andrey Smirnov
2019-02-07  1:21 ` [PATCH 01/16] ARM: Select HAS_DMA for AArch64 Andrey Smirnov
2019-02-07  1:22 ` [PATCH 02/16] include: Import io-64-nonatomic-*.h from Linux Andrey Smirnov
2019-02-07  1:22 ` [PATCH 03/16] net/e1000: Don't use coherent memory for Rx buffer Andrey Smirnov
2019-02-07  1:22 ` [PATCH 04/16] net/e1000: Convert e1000_transmit to use dma_map_single() Andrey Smirnov
2019-02-07  1:22 ` [PATCH 05/16] net/e1000: Fix debug print warning Andrey Smirnov
2019-02-07  1:22 ` [PATCH 06/16] net/e1000: Fix incorrect "Rx ready" check Andrey Smirnov
2019-02-07  1:22 ` [PATCH 07/16] net/e1000: Get rid of pointer arithmetic in e1000_poll Andrey Smirnov
2019-02-07  1:22 ` [PATCH 08/16] net/e1000: Improve Rx descriptor handling in e1000_poll() Andrey Smirnov
2019-02-07  1:22 ` [PATCH 09/16] net/e1000: Remove pointer arithmetic in e1000_transmit() Andrey Smirnov
2019-02-07  1:22 ` [PATCH 10/16] net/e1000: Improve Tx descriptor handling in e1000_transmit Andrey Smirnov
2019-02-07  1:22 ` Andrey Smirnov [this message]
2019-02-07  1:22 ` [PATCH 12/16] net/e1000: Rename fill_rx() to e1000_fill_rx() Andrey Smirnov
2019-02-07  1:22 ` [PATCH 13/16] net/e1000: Remove pointer arithmetic from e1000_fill_rx() Andrey Smirnov
2019-02-07  1:22 ` [PATCH 14/16] net/e1000: Consolidate next index calculation code Andrey Smirnov
2019-02-07  1:22 ` [PATCH 15/16] net/e1000: Improve RX buffer handling in e1000_fill_rx() Andrey Smirnov
2019-02-07  1:22 ` [PATCH 16/16] net/e1000: Do not hardcode TDBAH and RDBAH to 0 Andrey Smirnov
2019-02-11  7:48 ` [PATCH 00/16] E1000 driver AArch64 related fixes Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190207012214.5060-12-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox