mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: barebox@lists.infradead.org, Christian Hemp <christian.hemp@posteo.de>
Subject: Re: [PATCH] ARM: phyCORE-i.MX8M SOM support
Date: Wed, 13 Feb 2019 07:14:59 +0100	[thread overview]
Message-ID: <20190213061459.fp643qeqyk447ddo@pengutronix.de> (raw)
In-Reply-To: <1549882858.2546.3.camel@pengutronix.de>

Hi Christian,

On Mon, Feb 11, 2019 at 12:00:58PM +0100, Lucas Stach wrote:
> Hi Christian,
> 
> Am Mittwoch, den 06.02.2019, 19:41 +0100 schrieb Christian Hemp:
> > The phyCORE-i.MX8M aka PCL-066 is a SoM containing a i.MX8M SoC.
> > 
> > phyCORE-i.MX8M:
> >  - 1GB LPDDR4 RAM
> >  - eMMC
> >  - microSD
> >  - Ethernet
> > 
> > Signed-off-by: Christian Hemp <christian.hemp@posteo.de>
> > ---
> >  arch/arm/boards/Makefile                      |   1 +
> >  arch/arm/boards/phytec-som-imx8m/.gitignore   |   1 +
> >  arch/arm/boards/phytec-som-imx8m/Makefile     |   2 +
> >  arch/arm/boards/phytec-som-imx8m/board.c      |  55 +
> >  arch/arm/boards/phytec-som-imx8m/ddr.h        |  28 +
> >  arch/arm/boards/phytec-som-imx8m/ddr_init.c   | 225 +++++
> >  .../boards/phytec-som-imx8m/ddrphy_train.c    | 947 ++++++++++++++++++
> >  .../flash-header-phycore-imx8mq.imxcfg        |   5 +
> >  arch/arm/boards/phytec-som-imx8m/lowlevel.c   | 127 +++
> >  arch/arm/configs/imx_v8_defconfig             |   2 +
> >  arch/arm/dts/Makefile                         |   1 +
> >  arch/arm/dts/imx8mq-phytec-phycore-som.dts    | 328 ++++++
> >  arch/arm/mach-imx/Kconfig                     |   7 +
> >  images/Makefile.imx                           |   5 +
> >  14 files changed, 1734 insertions(+)
> >  create mode 100644 arch/arm/boards/phytec-som-imx8m/.gitignore
> >  create mode 100644 arch/arm/boards/phytec-som-imx8m/Makefile
> >  create mode 100644 arch/arm/boards/phytec-som-imx8m/board.c
> >  create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr.h
> >  create mode 100644 arch/arm/boards/phytec-som-imx8m/ddr_init.c
> >  create mode 100644 arch/arm/boards/phytec-som-imx8m/ddrphy_train.c
> >  create mode 100644 arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
> >  create mode 100644 arch/arm/boards/phytec-som-imx8m/lowlevel.c
> >  create mode 100644 arch/arm/dts/imx8mq-phytec-phycore-som.dts
> 
> The other supported i.MX8M boards are using a "imx8mq" name tag. I
> would really like to see some consistency here, as the i.MX8 naming in
> general is already confusing in itself, so we shouldn't add to this
> confusion by calling the same SoC both mx8m and mx8mq.

I tested your patch and needed following changes to make it work with
latest barebox:

diff --git a/arch/arm/boards/phytec-som-imx8m/ddr.h b/arch/arm/boards/phytec-som-imx8m/ddr.h
index 7d195e6002..58a1c91be3 100644
--- a/arch/arm/boards/phytec-som-imx8m/ddr.h
+++ b/arch/arm/boards/phytec-som-imx8m/ddr.h
@@ -20,9 +20,8 @@
 void phytec_imx8mq_phycore_ddr_init(void);
 void phytec_imx8mq_phycore_ddr_cfg_phy(void);
 
-#define FW_1D_IMAGE	imx_lpddr4_pmu_train_1d_imem_bin, \
-			imx_lpddr4_pmu_train_1d_dmem_bin
-#define FW_2D_IMAGE	imx_lpddr4_pmu_train_2d_imem_bin, \
-			imx_lpddr4_pmu_train_2d_dmem_bin
-
+#define FW_1D_IMAGE	lpddr4_pmu_train_1d_imem_bin, \
+			lpddr4_pmu_train_1d_dmem_bin
+#define FW_2D_IMAGE	lpddr4_pmu_train_2d_imem_bin, \
+			lpddr4_pmu_train_2d_dmem_bin
 
diff --git a/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg b/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
index aff8321b9a..eabc9426c7 100644
--- a/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
+++ b/arch/arm/boards/phytec-som-imx8m/flash-header-phycore-imx8mq.imxcfg
@@ -3,3 +3,4 @@ soc imx8mq
 loadaddr 0x007E1000
 max_load_size 0x3F000
 dcdofs 0x400
+signed_hdmi_firmware firmware/signed_hdmi_imx8m.bin
diff --git a/arch/arm/boards/phytec-som-imx8m/lowlevel.c b/arch/arm/boards/phytec-som-imx8m/lowlevel.c
index 4a1054a5eb..bd13fd1860 100644
--- a/arch/arm/boards/phytec-som-imx8m/lowlevel.c
+++ b/arch/arm/boards/phytec-som-imx8m/lowlevel.c
@@ -115,7 +115,7 @@ ENTRY_FUNCTION(start_phytec_phycore_imx8mq, r0, r1, r2)
 		const u8 *bl31;
 		size_t bl31_size;
 
-		get_builtin_firmware(imx_imx8m_bl31_bin, &bl31, &bl31_size);
+		get_builtin_firmware(imx8mq_bl31_bin, &bl31, &bl31_size);
 		imx8mq_atf_load_bl31(bl31, bl31_size);
 	}
 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-02-13  6:15 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-06 18:41 Christian Hemp
2019-02-07  1:20 ` Andrey Smirnov
2019-02-11  8:20 ` Sascha Hauer
2019-02-11 11:00 ` Lucas Stach
2019-02-13  6:14   ` Oleksij Rempel [this message]
2019-02-14 18:20     ` Christian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190213061459.fp643qeqyk447ddo@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=christian.hemp@posteo.de \
    --cc=l.stach@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox