mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Tomaz Solc <tomaz.solc@tablix.org>
To: barebox@lists.infradead.org
Cc: Tomaz Solc <tomaz.solc@tablix.org>
Subject: [PATCH 3/7] pinctrl: bcm2835: move existing code from gpio.
Date: Thu, 14 Feb 2019 14:24:25 +0100	[thread overview]
Message-ID: <20190214132429.7463-4-tomaz.solc@tablix.org> (raw)
In-Reply-To: <20190214132429.7463-1-tomaz.solc@tablix.org>

---
 arch/arm/configs/rpi_defconfig                             | 2 +-
 drivers/gpio/Kconfig                                       | 4 ----
 drivers/gpio/Makefile                                      | 1 -
 drivers/pinctrl/Kconfig                                    | 6 ++++++
 drivers/pinctrl/Makefile                                   | 1 +
 drivers/{gpio/gpio-bcm2835.c => pinctrl/pinctrl-bcm2835.c} | 0
 6 files changed, 8 insertions(+), 6 deletions(-)
 rename drivers/{gpio/gpio-bcm2835.c => pinctrl/pinctrl-bcm2835.c} (100%)

diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
index dc5ab1fe1..35943e025 100644
--- a/arch/arm/configs/rpi_defconfig
+++ b/arch/arm/configs/rpi_defconfig
@@ -71,7 +71,7 @@ CONFIG_LED_GPIO=y
 CONFIG_LED_TRIGGERS=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_BCM2835=y
-CONFIG_GPIO_BCM283X=y
+CONFIG_PINCTRL_BCM283X=y
 # CONFIG_PINCTRL is not set
 CONFIG_REGULATOR=y
 CONFIG_FS_EXT4=y
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ed93e868a..c535904ed 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -21,10 +21,6 @@ config GPIO_74164
 	  shift registers. This driver can be used to provide access
 	  to more gpio outputs.
 
-config GPIO_BCM283X
-	bool "GPIO support for BCM283X"
-	depends on ARCH_BCM283X
-
 config GPIO_CLPS711X
 	bool "GPIO support for CLPS711X"
 	depends on ARCH_CLPS711X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f5ed876d5..52280f0bb 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -2,7 +2,6 @@ obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
 
 obj-$(CONFIG_GPIO_74164)	+= gpio-74164.o
 obj-$(CONFIG_MACH_MIPS_ATH79)	+= gpio-ath79.o
-obj-$(CONFIG_GPIO_BCM283X)	+= gpio-bcm2835.o
 obj-$(CONFIG_GPIO_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
 obj-$(CONFIG_GPIO_DIGIC)	+= gpio-digic.o
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index de83c124a..45c3b351d 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -17,6 +17,12 @@ config PINCTRL_AT91
 	help
 	    The pinmux controller found on AT91 SoCs.
 
+config PINCTRL_BCM283X
+	bool "GPIO and pinmux support for BCM283X"
+	depends on ARCH_BCM283X
+	help
+	    The pinmux controller on BCM2835
+
 config PINCTRL_IMX_IOMUX_V1
 	bool
 	help
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 9450dbbdf..35b2d4707 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_PINCTRL)	+= pinctrl.o
 obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
+obj-$(CONFIG_PINCTRL_BCM283X)	+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_IMX_IOMUX_V1) += imx-iomux-v1.o
 obj-$(CONFIG_PINCTRL_IMX_IOMUX_V2) += imx-iomux-v2.o
 obj-$(CONFIG_PINCTRL_IMX_IOMUX_V3) += imx-iomux-v3.o
diff --git a/drivers/gpio/gpio-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c
similarity index 100%
rename from drivers/gpio/gpio-bcm2835.c
rename to drivers/pinctrl/pinctrl-bcm2835.c
-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-02-14 13:25 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-14 13:24 [PATCH 0/7] Fixing MMC access on Raspberry Pi CM3 Tomaz Solc
2019-02-14 13:24 ` [PATCH 1/7] ARM: rpi: switch emmc from sdhost to sdhci Tomaz Solc
2019-02-14 13:24 ` [PATCH 2/7] Kconfig: add pin controllers submenu Tomaz Solc
2019-02-14 13:24 ` Tomaz Solc [this message]
2019-02-14 13:24 ` [PATCH 4/7] pinctrl: bcm2835: register the pin controller Tomaz Solc
2019-02-14 13:24 ` [PATCH 5/7] mci: move after pinctrl in link order Tomaz Solc
2019-02-14 23:34   ` Andrey Smirnov
2019-02-18  8:42   ` Sascha Hauer
2019-02-18  9:54     ` Tomaž Šolc
2019-02-14 13:24 ` [PATCH 6/7] mci: bcm2835: parse other device tree properties Tomaz Solc
2019-02-14 13:24 ` [PATCH 7/7] ARM: rpi: Add device tree for Compute Module 3 Tomaz Solc
2019-02-14 14:15   ` Roland Hieber

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190214132429.7463-4-tomaz.solc@tablix.org \
    --to=tomaz.solc@tablix.org \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox