mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v2 0/8] Fixing MMC access on Raspberry Pi CM3
@ 2019-02-18 11:32 Tomaz Solc
  2019-02-18 11:32 ` [PATCH v2 1/8] ARM: rpi: switch emmc from sdhost to sdhci Tomaz Solc
                   ` (8 more replies)
  0 siblings, 9 replies; 10+ messages in thread
From: Tomaz Solc @ 2019-02-18 11:32 UTC (permalink / raw)
  To: barebox

Changes from the first patch series:

 - Base Compute Module 3 device tree off upstream device tree for CM3 + IO3
   dev board, instead of R. Pi 3B.
 - Keep Makefile.bcm283x without a newline at the end of file.
 - Make mci init before pinctrl by moving mci-bcm2835 to device_initcall()
   instead of changing link order.
 - Add CONFIG_PINCTRL to rpi_defconfig.

Best regards
Tomaz

Tomaz Solc (8):
  ARM: rpi: switch emmc from sdhost to sdhci
  Kconfig: add pin controllers submenu.
  pinctrl: bcm2835: move existing code from gpio.
  pinctrl: bcm2835: register the pin controller.
  mci: bcm2835: use device_initcall(), not coredev.
  mci: bcm2835: parse other device tree properties.
  ARM: rpi: Add device tree for Compute Module 3.
  ARM: rpi: add CONFIG_PINCTRL to rpi_defconfig.

 arch/arm/boards/raspberry-pi/lowlevel.c            | 10 +++++
 arch/arm/configs/rpi_defconfig                     |  4 +-
 arch/arm/dts/Makefile                              |  1 +
 arch/arm/dts/bcm2837-rpi-3.dts                     |  9 ++++
 arch/arm/dts/bcm2837-rpi-cm3.dts                   | 18 ++++++++
 arch/arm/mach-bcm283x/Kconfig                      |  6 +++
 drivers/gpio/Kconfig                               |  4 --
 drivers/gpio/Makefile                              |  1 -
 drivers/mci/mci-bcm2835.c                          |  5 ++-
 drivers/pinctrl/Kconfig                            | 10 +++++
 drivers/pinctrl/Makefile                           |  1 +
 .../gpio-bcm2835.c => pinctrl/pinctrl-bcm2835.c}   | 52 +++++++++++++++++++++-
 images/Makefile.bcm283x                            |  6 ++-
 13 files changed, 117 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/dts/bcm2837-rpi-cm3.dts
 rename drivers/{gpio/gpio-bcm2835.c => pinctrl/pinctrl-bcm2835.c} (77%)

-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2019-02-19  9:08 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-18 11:32 [PATCH v2 0/8] Fixing MMC access on Raspberry Pi CM3 Tomaz Solc
2019-02-18 11:32 ` [PATCH v2 1/8] ARM: rpi: switch emmc from sdhost to sdhci Tomaz Solc
2019-02-18 11:32 ` [PATCH v2 2/8] Kconfig: add pin controllers submenu Tomaz Solc
2019-02-18 11:32 ` [PATCH v2 3/8] pinctrl: bcm2835: move existing code from gpio Tomaz Solc
2019-02-18 11:32 ` [PATCH v2 4/8] pinctrl: bcm2835: register the pin controller Tomaz Solc
2019-02-18 11:32 ` [PATCH v2 5/8] mci: bcm2835: use device_initcall(), not coredev Tomaz Solc
2019-02-18 11:32 ` [PATCH v2 6/8] mci: bcm2835: parse other device tree properties Tomaz Solc
2019-02-18 11:32 ` [PATCH v2 7/8] ARM: rpi: Add device tree for Compute Module 3 Tomaz Solc
2019-02-18 11:32 ` [PATCH v2 8/8] ARM: rpi: add CONFIG_PINCTRL to rpi_defconfig Tomaz Solc
2019-02-19  9:08 ` [PATCH v2 0/8] Fixing MMC access on Raspberry Pi CM3 Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox