mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h
Date: Tue, 19 Feb 2019 18:21:36 +0100	[thread overview]
Message-ID: <20190219172150.11901-3-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20190219172150.11901-1-a.fatoum@pengutronix.de>

Instead of adding missing definitions to the existing at91sam9_ddrsdr.h
and adapting the incoming DDRAM initialization code from at91bootstrap,
just replace the lightly used existing header with this one.

For easier comprehension, the replacement is done in three steps:
Here the header is imported.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 .../arm/mach-at91/include/mach/at91_ddrsdrc.h | 288 ++++++++++++++++++
 1 file changed, 288 insertions(+)
 create mode 100644 arch/arm/mach-at91/include/mach/at91_ddrsdrc.h

diff --git a/arch/arm/mach-at91/include/mach/at91_ddrsdrc.h b/arch/arm/mach-at91/include/mach/at91_ddrsdrc.h
new file mode 100644
index 000000000000..57d0d8f489c4
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_ddrsdrc.h
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: BSD-1-Clause
+/*
+ * Copyright (c) 2006, Atmel Corporation
+ */
+#ifndef __AT91_DDRSDRC_H__
+#define __AT91_DDRSDRC_H__
+
+/**** Register offset in AT91S_HDDRSDRC2 structure ***/
+#define AT91C_HDDRSDRC2_MR		0x00	/* Mode Register */
+#define AT91C_HDDRSDRC2_RTR		0x04	/* Refresh Timer Register */
+#define AT91C_HDDRSDRC2_CR		0x08	/* Configuration Register */
+#define AT91C_HDDRSDRC2_T0PR		0x0C	/* Timing Parameter 0 Register */
+#define AT91C_HDDRSDRC2_T1PR		0x10	/* Timing Parameter 1 Register */
+#define AT91C_HDDRSDRC2_T2PR		0x14	/* Timing Parameter 2 Register */
+#define AT91C_HDDRSDRC2_T3PR		0x18	/* Timing Parameter 3 Register */
+#define AT91C_HDDRSDRC2_LPR		0x1C	/* Low-power Register */
+#define AT91C_HDDRSDRC2_MDR		0x20	/* Memory Device Register */
+#define AT91C_HDDRSDRC2_DLL		0x24	/* DLL Information Register */
+#define AT91C_HDDRSDRC2_HS		0x2C	/* High Speed Register */
+
+/* below items defined for sama5d3x */
+#define	AT91C_MPDDRC_LPDDR2_HS		0x24	/* MPDDRC LPDDR2 High Speed Register */
+#define	AT91C_MPDDRC_LPDDR2_LPR		0x28	/* MPDDRC LPDDR2 Low-power Register */
+#define	AT91C_MPDDRC_LPDDR2_CAL_MR4	0x2C	/* MPDDRC LPDDR2 Calibration and MR4 Register */
+#define	AT91C_MPDDRC_LPDDR2_TIM_CAL	0x30	/* MPDDRC LPDDR2 Timing Calibration Register */
+#define	AT91C_MPDDRC_IO_CALIBR		0x34	/* MPDDRC IO Calibration */
+#define	AT91C_MPDDRC_OCMS		0x38	/* MPDDRC OCMS Register */
+#define	AT91C_MPDDRC_OCMS_KEY1		0x3C	/* MPDDRC OCMS KEY1 Register */
+#define	AT91C_MPDDRC_OCMS_KEY2		0x40	/* MPDDRC OCMS KEY2 Register */
+/* 0x54 ~ 0x70 Reserved */
+#define	AT91C_MPDDRC_DLL_MOR		0x74	/* MPDDRC DLL Master Offset Register */
+#define	AT91C_MPDDRC_DLL_SOR		0x78	/* MPDDRC DLL Slave Offset Register */
+#define	AT91C_MPDDRC_DLL_MSR		0x7C	/* MPDDRC DLL Master Status Register */
+#define	AT91C_MPDDRC_DLL_S0SR		0x80	/* MPDDRC DLL Slave 0 Status Register */
+#define	AT91C_MPDDRC_DLL_S1SR		0x84	/* MPDDRC DLL Slave 1 Status Register */
+
+#define AT91C_MPDDRC_RD_DATA_PATH	0x5C	/* MPDDRC Read Data Path */
+
+/* 0x94 ~ 0xE0 Reserved */
+#define AT91C_HDDRSDRC2_WPCR		0xE4	/* Write Protect Mode Register */
+#define AT91C_HDDRSDRC2_WPSR		0xE8	/* Write Protect Status Register */
+
+/* -------- HDDRSDRC2_MR : (HDDRSDRC2 Offset: 0x0) Mode Register --------*/
+#define AT91C_DDRC2_MODE	(0x7UL << 0)
+#define 	AT91C_DDRC2_MODE_NORMAL_CMD		(0x0UL)
+#define 	AT91C_DDRC2_MODE_NOP_CMD		(0x1UL)
+#define 	AT91C_DDRC2_MODE_PRCGALL_CMD		(0x2UL)
+#define 	AT91C_DDRC2_MODE_LMR_CMD		(0x3UL)
+#define 	AT91C_DDRC2_MODE_RFSH_CMD		(0x4UL)
+#define 	AT91C_DDRC2_MODE_EXT_LMR_CMD		(0x5UL)
+#define 	AT91C_DDRC2_MODE_DEEP_CMD		(0x6UL)
+#define		AT91C_DDRC2_MODE_LPDDR2_CMD		(0x7UL)
+#define AT91C_DDRC2_MRS(value)	(value << 8)
+
+/* -------- HDDRSDRC2_RTR : (HDDRSDRC2 Offset: 0x4) Refresh Timer Register -------- */
+#define AT91C_DDRC2_COUNT	(0xFFFUL << 0)
+
+/* -------- HDDRSDRC2_CR : (HDDRSDRC2 Offset: 0x8) Configuration Register --------*/
+#define AT91C_DDRC2_NC		(0x3UL <<  0)
+#define 	AT91C_DDRC2_NC_DDR9_SDR8	(0x0UL)
+#define 	AT91C_DDRC2_NC_DDR10_SDR9	(0x1UL)
+#define 	AT91C_DDRC2_NC_DDR11_SDR10	(0x2UL)
+#define 	AT91C_DDRC2_NC_DDR12_SDR11	(0x3UL)
+#define AT91C_DDRC2_NR		(0x3UL << 2)
+#define 	AT91C_DDRC2_NR_11		(0x0UL << 2)
+#define 	AT91C_DDRC2_NR_12		(0x1UL << 2)
+#define 	AT91C_DDRC2_NR_13		(0x2UL << 2)
+#define 	AT91C_DDRC2_NR_14		(0x3UL << 2)
+#define AT91C_DDRC2_CAS		(0x7UL << 4)
+#define 	AT91C_DDRC2_CAS_2		(0x2UL << 4)
+#define 	AT91C_DDRC2_CAS_3		(0x3UL << 4)
+#define 	AT91C_DDRC2_CAS_4		(0x4UL << 4)
+#define 	AT91C_DDRC2_CAS_5		(0x5UL << 4)
+#define 	AT91C_DDRC2_CAS_6		(0x6UL << 4)
+#define AT91C_DDRC2_RESET_DLL		(0x1UL << 7)
+#define 	AT91C_DDRC2_DISABLE_RESET_DLL	(0x0UL << 7)
+#define 	AT91C_DDRC2_ENABLE_RESET_DLL	(0x1UL << 7)
+#define AT91C_DDRC2_DIC_DS	(0x1UL << 8)
+#define		AT91C_DDRC2_NORMAL_STRENGTH_RZQ6	(0x0UL << 8)
+#define		AT91C_DDRC2_WEAK_STRENGTH_RZQ7		(0x1UL << 8)
+#define AT91C_DDRC2_DLL	(0x1UL << 9)
+#define 	AT91C_DDRC2_ENABLE_DLL		(0x0UL << 9)
+#define 	AT91C_DDRC2_DISABLE_DLL		(0x1UL << 9)
+#define AT91C_DDRC2_ZQ		(0x03 << 10)
+#define		AT91C_DDRC2_ZQ_INIT		(0x0 << 10)
+#define		AT91C_DDRC2_ZQ_LONG		(0x1 << 10)
+#define		AT91C_DDRC2_ZQ_SHORT		(0x2 << 10)
+#define		AT91C_DDRC2_ZQ_RESET		(0x3 << 10)
+#define AT91C_DDRC2_OCD		(0x7UL << 12)
+#define 	AT91C_DDRC2_OCD_EXIT		(0x0UL << 12)
+#define 	AT91C_DDRC2_OCD_DEFAULT		(0x7UL << 12)
+#define AT91C_DDRC2_EBISHARE	(0x1UL << 16)
+#define AT91C_DDRC2_DQMS	(0x1UL << 16)
+#define		AT91C_DDRC2_DQMS_NOT_SHARED	(0x0UL << 16)
+#define		AT91C_DDRC2_DQMS_SHARED		(0x1UL << 16)
+#define AT91C_DDRC2_ENRDM	(0x1UL << 17)
+#define 	AT91C_DDRC2_ENRDM_DISABLE	(0x0UL << 17)
+#define 	AT91C_DDRC2_ENRDM_ENABLE	(0x1UL << 17)
+#define AT91C_DDRC2_ACTBST	(0x1UL << 18)
+#define AT91C_DDRC2_NB_BANKS	(0x1UL << 20)
+#define 	AT91C_DDRC2_NB_BANKS_4		(0x0UL << 20)
+#define 	AT91C_DDRC2_NB_BANKS_8		(0x1UL << 20)
+#define AT91C_DDRC2_NDQS	(0x1UL << 21)	/* Not DQS(sama5d3x only) */
+#define 	AT91C_DDRC2_NDQS_ENABLED	(0x0UL << 21)
+#define 	AT91C_DDRC2_NDQS_DISABLED	(0x1UL << 21)
+#define AT91C_DDRC2_DECOD	(0x1UL << 22)
+#define 	AT91C_DDRC2_DECOD_SEQUENTIAL	(0x0UL << 22)
+#define 	AT91C_DDRC2_DECOD_INTERLEAVED	(0x1UL << 22)
+#define AT91C_DDRC2_UNAL	(0x1UL << 23)	/* Support Unaligned Access(sama5d3x only) */
+#define 	AT91C_DDRC2_UNAL_UNSUPPORTED		(0x0UL << 23)
+#define 	AT91C_DDRC2_UNAL_SUPPORTED		(0x1UL << 23)
+
+/* -------- HDDRSDRC2_T0PR : (HDDRSDRC2 Offset: 0xc) Timing0 Register --------*/
+#define AT91C_DDRC2_TRAS	(0xFUL <<  0)
+#define		AT91C_DDRC2_TRAS_(x)		(x & 0x0f)
+#define	AT91C_DDRC2_TRCD	(0xFUL <<  4)
+#define		AT91C_DDRC2_TRCD_(x)		((x & 0x0f) << 4)
+#define	AT91C_DDRC2_TWR		(0xFUL << 8)
+#define		AT91C_DDRC2_TWR_(x)		((x & 0x0f) << 8)
+#define	AT91C_DDRC2_TRC		(0xFUL << 12)
+#define		AT91C_DDRC2_TRC_(x)		((x & 0x0f) << 12)
+#define	AT91C_DDRC2_TRP		(0xFUL << 16)
+#define		AT91C_DDRC2_TRP_(x)		((x & 0x0f) << 16)
+#define	AT91C_DDRC2_TRRD	(0xFUL << 20)
+#define		AT91C_DDRC2_TRRD_(x)		((x & 0x0f) << 20)
+#define	AT91C_DDRC2_TWTR	(0xFUL << 24)
+#define		AT91C_DDRC2_TWTR_(x)		((x & 0x0f) << 24)
+#define	AT91C_DDRC2_TMRD	(0xFUL << 28)
+#define		AT91C_DDRC2_TMRD_(x)		((x & 0x0f) << 28)
+
+/* -------- HDDRSDRC2_T1PR : (HDDRSDRC2 Offset: 0x10) Timing1 Register -------- */
+#define	AT91C_DDRC2_TRFC	(0x7FUL <<  0)
+#define		AT91C_DDRC2_TRFC_(x)		(x & 0x7f)
+#define	AT91C_DDRC2_TXSNR	(0xFFUL << 8)
+#define		AT91C_DDRC2_TXSNR_(x)		((x & 0xff) << 8)
+#define AT91C_DDRC2_TXSRD	(0xFFUL << 16)
+#define		AT91C_DDRC2_TXSRD_(x)		((x & 0xff) << 16)
+#define	AT91C_DDRC2_TXP		(0xFUL << 24)
+#define		AT91C_DDRC2_TXP_(x)		((x & 0x0f) << 24)
+
+/* -------- HDDRSDRC2_T2PR : (HDDRSDRC2 Offset: 0x14) Timing2 Register --------*/
+#define	AT91C_DDRC2_TXARD	(0xFUL << 0)
+#define		AT91C_DDRC2_TXARD_(x)		(x & 0x0f)
+#define	AT91C_DDRC2_TXARDS	(0xFUL << 4)
+#define		AT91C_DDRC2_TXARDS_(x)		((x & 0x0f) << 4)
+#define	AT91C_DDRC2_TRPA	(0xFUL << 8)
+#define		AT91C_DDRC2_TRPA_(x)		((x & 0x0f) << 8)
+#define	AT91C_DDRC2_TRT		(0xFUL << 12)
+#define		AT91C_DDRC2_TRTP_(x)		((x & 0x0f) << 12)
+#define	AT91C_DDRC2_TFA		(0xFUL << 16)
+#define		AT91C_DDRC2_TFAW_(x)		((x & 0x0f) << 16)
+
+/* -------- HDDRSDRC2_LPR : (HDDRSDRC2 Offset: 0x1c) --------*/
+#define AT91C_DDRC2_LPCB	(0x3UL << 0)
+#define 	AT91C_DDRC2_LPCB_DISABLED	(0x0UL)
+#define 	AT91C_DDRC2_LPCB_SELFREFRESH	(0x1UL)
+#define 	AT91C_DDRC2_LPCB_POWERDOWN	(0x2UL)
+#define 	AT91C_DDRC2_LPCB_DEEP_PWD	(0x3UL)
+#define AT91C_DDRC2_CLK_FR	(0x1UL << 2)
+#define AT91C_DDRC2_PASR	(0x7UL << 4)
+#define		AT91C_DDRC2_PASR_(x)		((x & 0x7) << 4)
+#define AT91C_DDRC2_DS		(0x7UL << 8)
+#define		AT91C_DDRC2_DS_(x)		((x & 0x7) << 8)
+#define AT91C_DDRC2_TIMEOUT	(0x3UL << 12)
+#define 	AT91C_DDRC2_TIMEOUT_0		(0x0UL << 12)
+#define 	AT91C_DDRC2_TIMEOUT_64		(0x1UL << 12)
+#define 	AT91C_DDRC2_TIMEOUT_128		(0x2UL << 12)
+#define 	AT91C_DDRC2_TIMEOUT_Reserved	(0x3UL << 12)
+#define AT91C_DDRC2_ADPE	(0x1UL << 16)
+#define 	AT91C_DDRC2_ADPE_FAST		(0x0UL << 16)
+#define 	AT91C_DDRC2_ADPE_SLOW		(0x1UL << 16)
+#define AT91C_DDRC2_UPD_MR	(0x3UL << 20)
+#define		AT91C_DDRC2_UPD_MR_NO_UPDATE		(0x0UL << 20)
+#define		AT91C_DDRC2_UPD_MR_SHARED_BUS		(0x1UL << 20)
+#define		AT91C_DDRC2_UPD_MR_NO_SHARED_BUS	(0x2UL << 20)
+#define AT91C_DDRC2_SELF_DONE	(0x1UL << 25)
+
+/* -------- HDDRSDRC2_MDR : (HDDRSDRC2 Offset: 0x20) Memory Device Register -------- */
+#define AT91C_DDRC2_MD		(0x7UL << 0)
+#define 	AT91C_DDRC2_MD_SDR_SDRAM	(0x0UL)
+#define 	AT91C_DDRC2_MD_LP_SDR_SDRAM	(0x1UL)
+#define 	AT91C_DDRC2_MD_DDR_SDRAM	(0x2UL)
+#define 	AT91C_DDRC2_MD_LP_DDR_SDRAM	(0x3UL)
+#define 	AT91C_DDRC2_MD_DDR3_SDRAM	(0x4UL)
+#define 	AT91C_DDRC2_MD_LPDDR3_SDRAM	(0x5UL)
+#define 	AT91C_DDRC2_MD_DDR2_SDRAM	(0x6UL)
+#define		AT91C_DDRC2_MD_LPDDR2_SDRAM	(0x7UL)
+#define AT91C_DDRC2_DBW		(0x1UL << 4)
+#define 	AT91C_DDRC2_DBW_32_BITS		(0x0UL << 4)
+#define 	AT91C_DDRC2_DBW_16_BITS		(0x1UL << 4)
+
+/* -------- HDDRSDRC2_DLL : (HDDRSDRC2 Offset: 0x24) DLL Information Register --------*/
+#define AT91C_DDRC2_MDINC	(0x1UL << 0)
+#define AT91C_DDRC2_MDDEC	(0x1UL << 1)
+#define AT91C_DDRC2_MDOVF	(0x1UL << 2)
+#define AT91C_DDRC2_MDVAL	(0xFFUL << 8)
+
+/* ------- MPDDRC_LPDDR2_LPR (offset: 0x28) */
+#define AT91C_LPDDRC2_BK_MASK_PASR(value)	(value << 0)
+#define AT91C_LPDDRC2_SEG_MASK(value)		(value << 8)
+#define AT91C_LPDDRC2_DS(value)			(value << 24)
+
+/* -------- HDDRSDRC2_HS : (HDDRSDRC2 Offset: 0x2c) High Speed Register --------*/
+#define AT91C_DDRC2_NO_ANT	(0x1UL << 2)
+
+/* -------- MPDDRC_LPDDR2_CAL_MR4: (MPDDRC Offset: 0x2c) Calibration and MR4 Register --------*/
+#define AT91C_DDRC2_COUNT_CAL_MASK	(0xFFFFUL)
+#define AT91C_DDRC2_COUNT_CAL(value)	(((value) & AT91C_DDRC2_COUNT_CAL_MASK) << 0)
+
+/* -------- MPDDRC_LPDDR2_TIM_CAL : (MPDDRC Offset: 0x30) */
+#define AT91C_DDRC2_ZQCS(value)	(value << 0)
+
+/* -------- MPDDRC_IO_CALIBR : (MPDDRC Offset: 0x34) IO Calibration --------*/
+#define AT91C_MPDDRC_RDIV	(0x7UL << 0)
+#define 	AT91C_MPDDRC_RDIV_LPDDR2_RZQ_34		(0x1UL << 0)
+#define 	AT91C_MPDDRC_RDIV_LPDDR2_RZQ_48		(0x3UL << 0)
+#define 	AT91C_MPDDRC_RDIV_LPDDR2_RZQ_60		(0x4UL << 0)
+#define 	AT91C_MPDDRC_RDIV_LPDDR2_RZQ_120	(0x7UL << 0)
+
+#define 	AT91C_MPDDRC_RDIV_DDR2_RZQ_33_3		(0x2UL << 0)
+#define 	AT91C_MPDDRC_RDIV_DDR2_RZQ_50		(0x4UL << 0)
+#define		AT91C_MPDDRC_RDIV_DDR2_RZQ_66_7		(0x6UL << 0)
+#define 	AT91C_MPDDRC_RDIV_DDR2_RZQ_100		(0x7UL << 0)
+
+#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_38		(0x02UL << 0)
+#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_46		(0x03UL << 0)
+#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_57		(0x04UL << 0)
+#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_77		(0x06UL << 0)
+#define		AT91C_MPDDRC_RDIV_LPDDR3_RZQ_115	(0x07UL << 0)
+
+#define	AT91C_MPDDRC_ENABLE_CALIB	(0x01 << 4)
+#define		AT91C_MPDDRC_DISABLE_CALIB		(0x00 << 4)
+#define		AT91C_MPDDRC_EN_CALIB		(0x01 << 4)
+
+#define	AT91C_MPDDRC_TZQIO	(0x7FUL << 8)
+#define	AT91C_MPDDRC_TZQIO_(x)		((x) << 8)
+#define		AT91C_MPDDRC_TZQIO_0	(0x0UL << 8)
+#define		AT91C_MPDDRC_TZQIO_1	(0x1UL << 8)
+#define		AT91C_MPDDRC_TZQIO_3	(0x3UL << 8)
+#define		AT91C_MPDDRC_TZQIO_4	(0x4UL << 8)
+#define		AT91C_MPDDRC_TZQIO_5	(0x5UL << 8)
+#define		AT91C_MPDDRC_TZQIO_31	(0x1FUL << 8)
+
+#define	AT91C_MPDDRC_CALCODEP	(0xFUL << 16)
+#define		AT91C_MPDDRC_CALCODEP_(x)	((x) << 16)
+
+#define	AT91C_MPDDRC_CALCODEN	(0xFUL << 20)
+#define		AT91C_MPDDRC_CALCODEN_(x)	((x) << 20)
+
+/* ---- MPDDRC_RD_DATA_PATH : (MPDDRC Offset: 0x5c) MPDDRC Read Data Path */
+#define AT91_MPDDRC_SHIFT_SAMPLING	(0x03 << 0)
+#define		AT91C_MPDDRC_RD_DATA_PATH_NO_SHIFT	(0x00 << 0)
+#define		AT91C_MPDDRC_RD_DATA_PATH_ONE_CYCLES	(0x01 << 0)
+#define		AT91C_MPDDRC_RD_DATA_PATH_TWO_CYCLES	(0x02 << 0)
+#define		AT91C_MPDDRC_RD_DATA_PATH_THREE_CYCLES	(0x03 << 0)
+
+/* -------- MPDDRC_DLL_MOR : (MPDDRC Offset: 0x74) DLL Master Offset Register --------*/
+#define AT91C_MPDDRC_MOFF(value)	(value << 0)
+#define 	AT91C_MPDDRC_MOFF_1	(0x1UL << 0)
+#define 	AT91C_MPDDRC_MOFF_7	(0x7UL << 0)
+#define AT91C_MPDDRC_CLK90OFF(value)		(value << 8)
+#define 	AT91C_MPDDRC_CLK90OFF_1		(0x1UL << 8)
+#define 	AT91C_MPDDRC_CLK90OFF_31	(0x1FUL << 8)
+#define AT91C_MPDDRC_SELOFF	(0x1UL << 16)
+#define 	AT91C_MPDDRC_SELOFF_DISABLED	(0x0UL << 16)
+#define 	AT91C_MPDDRC_SELOFF_ENABLED	(0x1UL << 16)
+#define AT91C_MPDDRC_KEY	(0xC5UL << 24)
+
+/* -------- MPDDRC_DLL_SOR : (MPDDRC Offset: 0x78) DLL Slave Offset Register --------*/
+#define AT91C_MPDDRC_S0OFF_1	(0x1UL << 0)
+#define AT91C_MPDDRC_S1OFF_1	(0x1UL << 8)
+#define AT91C_MPDDRC_S2OFF_1	(0x1UL << 16)
+#define AT91C_MPDDRC_S3OFF_1	(0x1UL << 24)
+
+#define AT91C_MPDDRC_S0OFF(value)	(value << 0)
+#define AT91C_MPDDRC_S1OFF(value)	(value << 8)
+#define AT91C_MPDDRC_S2OFF(value)	(value << 16)
+#define AT91C_MPDDRC_S3OFF(value)	(value << 24)
+
+/* -------- HDDRSDRC2_WPCR : (HDDRSDRC2 Offset: 0xe4) Write Protect Control Register --------*/
+#define AT91C_DDRC2_WPEN	(0x1UL << 0)
+#define AT91C_DDRC2_WPKEY	(0xFFFFFFUL << 8)
+
+/* -------- HDDRSDRC2_WPSR : (HDDRSDRC2 Offset: 0xe8) Write Protect Status Register --------*/
+#define AT91C_DDRC2_WPVS	(0x1UL << 0)
+#define AT91C_DDRC2_WPSRC	(0xFFFFUL << 8)
+
+#endif /* __AT91_DDRSDRC_H__ */
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-02-19 17:22 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-19 17:21 [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 01/16] LICENSES: add BSD-1-Clause license Ahmad Fatoum
2019-02-19 17:21 ` Ahmad Fatoum [this message]
2019-02-22 13:33   ` [PATCH v2 02/16] ARM: at91: import at91bootstrap's at91_ddrsdrc.h Roland Hieber
2019-02-26  9:04     ` Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 03/16] ARM: at91: migrate at91sam9_ddrsdr.h to use " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 04/16] ARM: at91: replace at91sam9_ddrsdr.h with " Ahmad Fatoum
2019-02-20  9:07   ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 05/16] ARM: at91: watchdog: implement at91_wdt_disable Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 06/16] ARM: at91: import lowlevel clock initialization from at91bootstrap Ahmad Fatoum
2019-02-20  9:11   ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 07/16] ARM: at91: import early_udelay " Ahmad Fatoum
2019-02-20  9:20   ` Sascha Hauer
2019-02-20  9:23     ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 08/16] ARM: at91: import low level DDRAMC initialization code " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 09/16] ARM: at91: import lowlevel dbgu UART init " Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 10/16] images: at91: differentiate between first and second stage images Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 11/16] ARM: at91: sama5: specify 0x10000 as first stage max size Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 12/16] ARM: at91: microchip-ksz9477-evb: use compressed DTB Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 13/16] ARM: dts: microchip-ksz9477-evb: add dummy first stage device tree Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 14/16] ARM: at91: microchip-ksz9477-evb: implement first stage Ahmad Fatoum
2019-02-22 13:45   ` Roland Hieber
2019-02-26  9:05     ` Ahmad Fatoum
2019-02-19 17:21 ` [PATCH v2 15/16] ARM: at91: microchip-ksz9477: provide board code fallback Ahmad Fatoum
2019-02-20  9:27   ` Sascha Hauer
2019-02-19 17:21 ` [PATCH v2 16/16] doc: microchip-ksz9477-evb: add documentation Ahmad Fatoum
2019-02-24 12:42 ` [PATCH v2 00/16] ARM: at91: microchip-kz9477-evb: support first stage boot Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190219172150.11901-3-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox