mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 25/25] usb: usb251xb: add usb data lane port swap feature
Date: Tue, 19 Feb 2019 23:29:30 -0800	[thread overview]
Message-ID: <20190220072930.14300-26-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190220072930.14300-1-andrew.smirnov@gmail.com>

Port of Linux patch https://patchwork.kernel.org/patch/10766235/

  The HW can swap the USB differential-pair (D+/D-) for each port
  separately. So the USB signals can be re-aligned with a misplaced
  USB connector on the PCB.

  Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
  Reviewed-by: Richard Leitner <richard.leitner@skidata.com>

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/usb/misc/usb251xb.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 0b721f6d4..97f55efa8 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -340,12 +340,14 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	struct device_d *dev = hub->dev;
 	struct device_node *np = dev->device_node;
 	int len, err, i;
-	u32 property_u32 = 0;
+	u32 port, property_u32 = 0;
 	const u32 *cproperty_u32;
 	const char *cproperty_char;
 	enum of_gpio_flags of_flags;
 	unsigned long flags = GPIOF_OUT_INIT_ACTIVE;
 	char str[USB251XB_STRING_BUFSIZE / 2];
+	struct property *prop;
+	const __be32 *p;
 
 	if (!np) {
 		dev_err(dev, "failed to get ofdata\n");
@@ -556,6 +558,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 			      (wchar_t *)hub->serial,
 			      USB251XB_STRING_BUFSIZE);
 
+	/*
+	 * The datasheet documents the register as 'Port Swap' but the register
+	 * controls the USB DP/DM signal swapping
+	 */
+	hub->port_swap = USB251XB_DEF_PORT_SWAP;
+	of_property_for_each_u32(np, "swap-dx-lanes", prop, p, port) {
+		if ((port >= 0) && (port <= data->port_cnt))
+			hub->port_swap |= BIT(port);
+	}
+
 	/* The following parameters are currently not exposed to devicetree, but
 	 * may be as soon as needed.
 	 */
@@ -563,7 +575,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	hub->boost_up = USB251XB_DEF_BOOST_UP;
 	hub->boost_57 = USB251XB_DEF_BOOST_57;
 	hub->boost_14 = USB251XB_DEF_BOOST_14;
-	hub->port_swap = USB251XB_DEF_PORT_SWAP;
 	hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
 	hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
 	hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-02-20  7:30 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-20  7:29 [PATCH 00/25] i.MX8MQ USB support Andrey Smirnov
2019-02-20  7:29 ` [PATCH 01/25] usb: xhci-hcd: Tabify the file Andrey Smirnov
2019-02-20  7:29 ` [PATCH 02/25] usb: xhci-hcd: Do not zero out DMA coherent memory Andrey Smirnov
2019-02-20  9:29   ` Yann Sionneau
2019-02-20 18:54     ` Andrey Smirnov
2019-02-23 10:16     ` Sam Ravnborg
2019-02-20  7:29 ` [PATCH 03/25] usb: xhci-hcd: Cast ~XHCI_IRQS to u32 Andrey Smirnov
2019-02-20  7:29 ` [PATCH 04/25] usb: xhci-hcd: Make sure to initialize xhci->rings_list Andrey Smirnov
2019-02-20  7:29 ` [PATCH 05/25] usb: xhci-hcd: Drop pointless bitwise or Andrey Smirnov
2019-02-20  7:29 ` [PATCH 06/25] usb: xhci-hcd: Add support for 64-byte context size Andrey Smirnov
2019-02-20  7:29 ` [PATCH 07/25] usb: xhci-hcd: Don't try to DMA sync if buffer is NULL Andrey Smirnov
2019-02-20  7:29 ` [PATCH 08/25] usb: xhci-hcd: Always wait for "Response Data" completion Andrey Smirnov
2019-02-20  7:29 ` [PATCH 09/25] usb: xhci-hcd: Convert xhci_submit_normal() to use dma_map_single() Andrey Smirnov
2019-02-20  7:29 ` [PATCH 10/25] usb: xhci-hcd: Convert xhci_submit_control() " Andrey Smirnov
2019-02-20  7:29 ` [PATCH 11/25] usb: xhci-hcd: Simplify TRB initialization code Andrey Smirnov
2019-02-20  7:29 ` [PATCH 12/25] usb: xhci-hcd: Drop 'dma' field from struct xhci_hcd Andrey Smirnov
2019-02-20  7:29 ` [PATCH 13/25] usb: xhci-hcd: Check usb_pipein(pipe) only once in xhci_submit_normal() Andrey Smirnov
2019-02-20  7:29 ` [PATCH 14/25] usb: xhci-hcd: Initialize TRT flag for xHCI >= 1.0 Andrey Smirnov
2019-02-20  7:29 ` [PATCH 15/25] usb: xhci-hcd: Simplify route string building loop Andrey Smirnov
2019-02-20  7:29 ` [PATCH 16/25] usb: xhci-hcd: Make use of lo_hi_readq/writeq() Andrey Smirnov
2019-02-20  7:29 ` [PATCH 17/25] phy: core: Assume EPROBE_DEFER in of_phy_provider_lookup() Andrey Smirnov
2019-02-20  7:29 ` [PATCH 18/25] phy: Port i.MX8MQ USB PHY driver from Linux Andrey Smirnov
2019-02-20  7:29 ` [PATCH 19/25] clk: Drop separate definitions of clk_put() Andrey Smirnov
2019-02-20  7:29 ` [PATCH 20/25] include/usb: Import USB_SPEED_SUPER_PLUS from Linux Andrey Smirnov
2019-02-20  7:29 ` [PATCH 21/25] clk: Import a subset of clk_bulk API " Andrey Smirnov
2019-02-20  7:29 ` [PATCH 22/25] usb: Import DWC3 USB controller driver " Andrey Smirnov
2019-02-20  7:29 ` [PATCH 23/25] lib: Port basic Linux kernel NLS functions Andrey Smirnov
2019-02-20  7:29 ` [PATCH 24/25] usb: Port Microchip USB251x USB hub driver from Linux Andrey Smirnov
2019-02-20  7:29 ` Andrey Smirnov [this message]
2019-02-22  7:27 ` [PATCH 00/25] i.MX8MQ USB support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190220072930.14300-26-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox