mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Roland Hieber <rhi@pengutronix.de>
To: Tomaz Solc <tomaz.solc@tablix.org>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM: rpi: refactor debug UART Kconfig settings.
Date: Fri, 1 Mar 2019 11:58:21 +0100	[thread overview]
Message-ID: <20190301105821.6nbid4twzmti3edz@pengutronix.de> (raw)
In-Reply-To: <20190228113900.16177-1-tomaz.solc@tablix.org>

On Thu, Feb 28, 2019 at 12:39:00PM +0100, Tomaz Solc wrote:
> This fixes the following issues in the debug UART config for Raspberry
> Pi boards:
> 
> When debug UART support is enabled, only R.Pi 1 or 2/3 boards
> can be supported in a single build. However, this limitation was not
> enforced in the "boards to be built" menu. E.g. it was possible to
> build a R.Pi 3 image with (non-functional) debug UART support for R.Pi
> 1.
> 
> In contrast to other architectures, R.Pi debug UART config was placed
> under the "System Type" menu, not under the "Debugging -> low-level
> debugging port". This made this setting easy to miss when enabling low
> level debug mesages.
> ---
>  arch/arm/mach-bcm283x/Kconfig                 | 24 ++++------------------
>  arch/arm/mach-bcm283x/include/mach/debug_ll.h |  6 +++---
>  common/Kconfig                                | 29 +++++++++++++++++++++++++++
>  3 files changed, 36 insertions(+), 23 deletions(-)

Reviewed-by: Roland Hieber <rhi@pengutronix.de>

> 
> diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
> index bb5f75dc9..df9206d61 100644
> --- a/arch/arm/mach-bcm283x/Kconfig
> +++ b/arch/arm/mach-bcm283x/Kconfig
> @@ -13,44 +13,28 @@ config MACH_RPI
>  	bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
>  	select CPU_V6
>  	select MACH_RPI_COMMON
> +	depends on (!DEBUG_LL) || DEBUG_RPI1_UART
>  
>  config MACH_RPI2
>  	bool "RaspberryPi 2 (BCM2836/CORTEX-A7)"
>  	select CPU_V7
>  	select MACH_RPI_COMMON
> +	depends on (!DEBUG_LL) || DEBUG_RPI2_UART
>  
>  config MACH_RPI3
>  	bool "RaspberryPi 3 (BCM2837/CORTEX-A53)"
>  	select CPU_V7
>  	select MACH_RPI_COMMON
>  	select ARM_SECURE_MONITOR
> +	depends on (!DEBUG_LL) || DEBUG_RPI2_UART
>  
>  config MACH_RPI_CM3
>  	bool "RaspberryPi Compute Module 3 (BCM2837/CORTEX-A53)"
>  	select CPU_V7
>  	select MACH_RPI_COMMON
>  	select ARM_SECURE_MONITOR
> +	depends on (!DEBUG_LL) || DEBUG_RPI2_UART
>  
>  endmenu
>  
> -config MACH_RPI_DEBUG_UART_BASE
> -	hex
> -	default 0x20201000 if MACH_RPI_DEBUG_UART_RPI
> -	default 0x3f201000 if MACH_RPI_DEBUG_UART_RPI2
> -
> -if DEBUG_LL
> -
> -choice
> -	prompt "Lowlevel debug UART"
> -
> -config MACH_RPI_DEBUG_UART_RPI
> -	bool "use RaspberryPi 1 compatible base"
> -
> -config MACH_RPI_DEBUG_UART_RPI2
> -	bool "use RaspberryPi 2 and 3 compatible base"
> -
> -endchoice
> -
> -endif
> -
>  endif
> diff --git a/arch/arm/mach-bcm283x/include/mach/debug_ll.h b/arch/arm/mach-bcm283x/include/mach/debug_ll.h
> index a625a8bdb..e4a935800 100644
> --- a/arch/arm/mach-bcm283x/include/mach/debug_ll.h
> +++ b/arch/arm/mach-bcm283x/include/mach/debug_ll.h
> @@ -20,11 +20,11 @@
>  
>  #include <mach/platform.h>
>  
> -#ifndef CONFIG_MACH_RPI_DEBUG_UART_BASE
> -#define CONFIG_MACH_RPI_DEBUG_UART_BASE 0
> +#ifndef CONFIG_DEBUG_RPI_UART_BASE
> +#define CONFIG_DEBUG_RPI_UART_BASE 0
>  #endif
>  
> -#define DEBUG_LL_UART_ADDR CONFIG_MACH_RPI_DEBUG_UART_BASE
> +#define DEBUG_LL_UART_ADDR CONFIG_DEBUG_RPI_UART_BASE
>  
>  #include <asm/debug_ll_pl011.h>
>  
> diff --git a/common/Kconfig b/common/Kconfig
> index 21b33f06f..7e2ac2feb 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -1159,6 +1159,29 @@ config DEBUG_SOCFPGA_UART1
>  	  Say Y here if you want kernel low-level debugging support
>  	  on SOCFPGA(Arria 10) based platforms.
>  
> +config DEBUG_RPI1_UART
> +	bool "RaspberryPi 1 low-level debug UART"
> +	depends on ARCH_BCM283X
> +	help
> +	  Say Y here if you want low-level debugging support on
> +	  RaspberryPi 1 boards.
> +
> +	  Selecting this also limits available choices in "boards to
> +	  be built" under "system type". If you want to build images
> +	  that work on both RaspberryPi 1 and 2/3, you need to deselect
> +	  low-level debug.
> +
> +config DEBUG_RPI2_UART
> +	bool "RaspberryPi 2/3 low-level debug UART"
> +	depends on ARCH_BCM283X
> +	help
> +	  Say Y here if you want low-level debugging support on
> +	  RaspberryPi 2 and 3 boards.
> +
> +	  Selecting this also limits available choices in "boards to
> +	  be built" under "system type". If you want to build images
> +	  that work on both RaspberryPi 1 and 2/3, you need to deselect
> +	  low-level debug.
>  
>  endchoice
>  
> @@ -1209,6 +1232,12 @@ config DEBUG_SOCFPGA_UART_PHYS_ADDR
>  	default 0xffc02100 if DEBUG_SOCFPGA_UART1
>  	depends on ARCH_SOCFPGA
>  
> +config DEBUG_RPI_UART_BASE
> +	hex
> +	default 0x20201000 if DEBUG_RPI1_UART
> +	default 0x3f201000 if DEBUG_RPI2_UART
> +	depends on ARCH_BCM283X
> +
>  config DEBUG_SOCFPGA_UART_CLOCK
>  	int "SoCFPGA UART debug clock" if DEBUG_LL
>  	default 100000000 if ARCH_SOCFPGA_CYCLONE5
> -- 
> 2.11.0
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Roland Hieber                     | r.hieber@pengutronix.de     |
Pengutronix e.K.                  | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-03-01 10:58 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-28 11:39 Tomaz Solc
2019-03-01  6:42 ` Rouven Czerwinski
2019-03-01 10:58 ` Roland Hieber [this message]
2019-03-04  8:04 ` Sascha Hauer
2019-03-05  9:13   ` Tomaž Šolc
2019-03-06  9:45     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190301105821.6nbid4twzmti3edz@pengutronix.de \
    --to=rhi@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=tomaz.solc@tablix.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox