From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by casper.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1h40Or-0001ZZ-Nf for barebox@lists.infradead.org; Wed, 13 Mar 2019 09:42:17 +0000 From: Sascha Hauer Date: Wed, 13 Mar 2019 10:41:58 +0100 Message-Id: <20190313094202.14901-12-s.hauer@pengutronix.de> In-Reply-To: <20190313094202.14901-1-s.hauer@pengutronix.de> References: <20190313094202.14901-1-s.hauer@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 11/15] ARM: Add basic Layerscape support To: Barebox List This adds basic Layerscape support: - Makefile/Kconfig - Register maps - errata workarounds Signed-off-by: Sascha Hauer --- arch/arm/Kconfig | 7 + arch/arm/Makefile | 1 + arch/arm/mach-layerscape/Kconfig | 8 + arch/arm/mach-layerscape/Makefile | 4 + arch/arm/mach-layerscape/errata.c | 195 ++++++++++ arch/arm/mach-layerscape/icid.c | 243 ++++++++++++ .../mach-layerscape/include/mach/debug_ll.h | 34 ++ .../arm/mach-layerscape/include/mach/errata.h | 7 + .../mach-layerscape/include/mach/layerscape.h | 7 + .../mach-layerscape/include/mach/lowlevel.h | 7 + arch/arm/mach-layerscape/lowlevel-ls1046a.c | 246 ++++++++++++ arch/arm/mach-layerscape/lowlevel.S | 18 + common/Kconfig | 8 + images/Makefile | 3 +- images/Makefile.layerscape | 18 + include/soc/fsl/fsl_qbman.h | 74 ++++ include/soc/fsl/immap_lsch2.h | 355 ++++++++++++++++++ 17 files changed, 1234 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-layerscape/Kconfig create mode 100644 arch/arm/mach-layerscape/Makefile create mode 100644 arch/arm/mach-layerscape/errata.c create mode 100644 arch/arm/mach-layerscape/icid.c create mode 100644 arch/arm/mach-layerscape/include/mach/debug_ll.h create mode 100644 arch/arm/mach-layerscape/include/mach/errata.h create mode 100644 arch/arm/mach-layerscape/include/mach/layerscape.h create mode 100644 arch/arm/mach-layerscape/include/mach/lowlevel.h create mode 100644 arch/arm/mach-layerscape/lowlevel-ls1046a.c create mode 100644 arch/arm/mach-layerscape/lowlevel.S create mode 100644 images/Makefile.layerscape create mode 100644 include/soc/fsl/fsl_qbman.h create mode 100644 include/soc/fsl/immap_lsch2.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9d3f5b2ca7..4e5b4bcee1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -113,6 +113,12 @@ config ARCH_IMX select WATCHDOG_IMX_RESET_SOURCE select HAS_DEBUG_LL +config ARCH_LAYERSCAPE + bool "NXP Layerscape based" + select GPIOLIB + select HAS_DEBUG_LL + select HAVE_PBL_MULTI_IMAGES + config ARCH_MVEBU bool "Marvell EBU platforms" select COMMON_CLK @@ -275,6 +281,7 @@ source arch/arm/mach-digic/Kconfig source arch/arm/mach-ep93xx/Kconfig source arch/arm/mach-highbank/Kconfig source arch/arm/mach-imx/Kconfig +source arch/arm/mach-layerscape/Kconfig source arch/arm/mach-mxs/Kconfig source arch/arm/mach-mvebu/Kconfig source arch/arm/mach-netx/Kconfig diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6b5f21a7a9..d4f028890b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -87,6 +87,7 @@ machine-$(CONFIG_ARCH_DIGIC) := digic machine-$(CONFIG_ARCH_EP93XX) := ep93xx machine-$(CONFIG_ARCH_HIGHBANK) := highbank machine-$(CONFIG_ARCH_IMX) := imx +machine-$(CONFIG_ARCH_LAYERSCAPE) := layerscape machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_MVEBU) := mvebu machine-$(CONFIG_ARCH_NOMADIK) := nomadik diff --git a/arch/arm/mach-layerscape/Kconfig b/arch/arm/mach-layerscape/Kconfig new file mode 100644 index 0000000000..5117d4b914 --- /dev/null +++ b/arch/arm/mach-layerscape/Kconfig @@ -0,0 +1,8 @@ +if ARCH_LAYERSCAPE + +config ARCH_LS1046 + select CPU_V8 + select SYS_SUPPORTS_64BIT_KERNEL + bool + +endif diff --git a/arch/arm/mach-layerscape/Makefile b/arch/arm/mach-layerscape/Makefile new file mode 100644 index 0000000000..269839254b --- /dev/null +++ b/arch/arm/mach-layerscape/Makefile @@ -0,0 +1,4 @@ +obj- := __dummy__.o +lwl-y += lowlevel.o errata.o +lwl-$(CONFIG_ARCH_LS1046) += lowlevel-ls1046a.o +obj-y += icid.o diff --git a/arch/arm/mach-layerscape/errata.c b/arch/arm/mach-layerscape/errata.c new file mode 100644 index 0000000000..4f4b759ddb --- /dev/null +++ b/arch/arm/mach-layerscape/errata.c @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include +#include +#include +#include +#include +#include +#include + +#define scfg_clrsetbits32(addr, clear, set) clrsetbits_be32(addr, clear, set) +#define scfg_clrbits32(addr, clear) clrbits_be32(addr, clear) + +static inline void set_usb_pcstxswingfull(u32 __iomem *scfg, u32 offset) +{ + scfg_clrsetbits32(scfg + offset / 4, + 0x7f << 9, + SCFG_USB_PCSTXSWINGFULL << 9); +} + +static void erratum_a008997_ls1046a(void) +{ + u32 __iomem *scfg = (u32 __iomem *)LSCH2_SCFG_ADDR; + + set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB1); + set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB2); + set_usb_pcstxswingfull(scfg, SCFG_USB3PRM2CR_USB3); +} + +#define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy) \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_2); \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3); \ + out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4) + +static void erratum_a009007_ls1046a(void) +{ + void __iomem *usb_phy = IOMEM(SCFG_USB_PHY1); + + PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); + usb_phy = (void __iomem *)SCFG_USB_PHY2; + PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); + + usb_phy = (void __iomem *)SCFG_USB_PHY3; + PROGRAM_USB_PHY_RX_OVRD_IN_HI(usb_phy); +} + +static inline void set_usb_txvreftune(u32 __iomem *scfg, u32 offset) +{ + scfg_clrsetbits32(scfg + offset / 4, 0xf << 6, SCFG_USB_TXVREFTUNE << 6); +} + +static void erratum_a009008_ls1046a(void) +{ + u32 __iomem *scfg = IOMEM(LSCH2_SCFG_ADDR); + + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB1); + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB2); + set_usb_txvreftune(scfg, SCFG_USB3PRM1CR_USB3); +} + +static inline void set_usb_sqrxtune(u32 __iomem *scfg, u32 offset) +{ + scfg_clrbits32(scfg + offset / 4, SCFG_USB_SQRXTUNE_MASK << 23); +} + +static void erratum_a009798_ls1046a(void) +{ + u32 __iomem *scfg = IOMEM(LSCH2_SCFG_ADDR); + + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB1); + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB2); + set_usb_sqrxtune(scfg, SCFG_USB3PRM1CR_USB3); +} + +static void erratum_a008850_early(void) +{ + /* part 1 of 2 */ + struct ccsr_cci400 __iomem *cci = IOMEM(LSCH2_CCI400_ADDR); + struct ccsr_ddr __iomem *ddr = IOMEM(LSCH2_DDR_ADDR); + + /* Skip if running at lower exception level */ + if (current_el() < 3) + return; + + /* disables propagation of barrier transactions to DDRC from CCI400 */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); + + /* disable the re-ordering in DDRC */ + ddr_out32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS); +} + +/* erratum_a009942_check_cpo */ + +void ls1046a_errata(void) +{ + erratum_a008850_early(); + erratum_a009008_ls1046a(); + erratum_a009798_ls1046a(); + erratum_a008997_ls1046a(); + erratum_a009007_ls1046a(); +} + +static void erratum_a008850_post(void) +{ + /* part 2 of 2 */ + struct ccsr_cci400 __iomem *cci = IOMEM(LSCH2_CCI400_ADDR); + struct ccsr_ddr __iomem *ddr = IOMEM(LSCH2_DDR_ADDR); + u32 tmp; + + /* Skip if running at lower exception level */ + if (current_el() < 3) + return; + + /* enable propagation of barrier transactions to DDRC from CCI400 */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); + + /* enable the re-ordering in DDRC */ + tmp = ddr_in32(&ddr->eor); + tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS); + ddr_out32(&ddr->eor, tmp); +} + +/* + * This additional workaround of A009942 checks the condition to determine if + * the CPO value set by the existing A009942 workaround needs to be updated. + * If need, print a warning to prompt user reconfigure DDR debug_29[24:31] with + * expected optimal value, the optimal value is highly board dependent. + */ +static void erratum_a009942_check_cpo(void) +{ + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(LSCH2_DDR_ADDR); + u32 cpo, cpo_e, cpo_o, cpo_target, cpo_optimal; + u32 cpo_min = ddr_in32(&ddr->debug[9]) >> 24; + u32 cpo_max = cpo_min; + u32 sdram_cfg, i, tmp, lanes, ddr_type; + bool update_cpo = false, has_ecc = false; + + sdram_cfg = ddr_in32(&ddr->sdram_cfg); + if (sdram_cfg & SDRAM_CFG_32_BE) + lanes = 4; + else if (sdram_cfg & SDRAM_CFG_16_BE) + lanes = 2; + else + lanes = 8; + + if (sdram_cfg & SDRAM_CFG_ECC_EN) + has_ecc = true; + + /* determine the maximum and minimum CPO values */ + for (i = 9; i < 9 + lanes / 2; i++) { + cpo = ddr_in32(&ddr->debug[i]); + cpo_e = cpo >> 24; + cpo_o = (cpo >> 8) & 0xff; + tmp = min(cpo_e, cpo_o); + if (tmp < cpo_min) + cpo_min = tmp; + tmp = max(cpo_e, cpo_o); + if (tmp > cpo_max) + cpo_max = tmp; + } + + if (has_ecc) { + cpo = ddr_in32(&ddr->debug[13]); + cpo = cpo >> 24; + if (cpo < cpo_min) + cpo_min = cpo; + if (cpo > cpo_max) + cpo_max = cpo; + } + + cpo_target = ddr_in32(&ddr->debug[28]) & 0xff; + cpo_optimal = ((cpo_max + cpo_min) >> 1) + 0x27; + debug("cpo_optimal = 0x%x, cpo_target = 0x%x\n", cpo_optimal, + cpo_target); + debug("cpo_max = 0x%x, cpo_min = 0x%x\n", cpo_max, cpo_min); + + ddr_type = (sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> + SDRAM_CFG_SDRAM_TYPE_SHIFT; + if (ddr_type == SDRAM_TYPE_DDR4) + update_cpo = (cpo_min + 0x3b) < cpo_target ? true : false; + else if (ddr_type == SDRAM_TYPE_DDR3) + update_cpo = (cpo_min + 0x3f) < cpo_target ? true : false; + + if (update_cpo) { + printf("WARN: pls set popts->cpo_sample = 0x%x ", cpo_optimal); + printf("in /ddr.c to optimize cpo\n"); + } +} + +void ls1046a_errata_post_ddr(void) +{ + erratum_a008850_post(); + erratum_a009942_check_cpo(); +} diff --git a/arch/arm/mach-layerscape/icid.c b/arch/arm/mach-layerscape/icid.c new file mode 100644 index 0000000000..2326d7e67a --- /dev/null +++ b/arch/arm/mach-layerscape/icid.c @@ -0,0 +1,243 @@ +#include +#include +#include +#include +#include +#include + +/* + * Stream IDs on Chassis-2 (for example ls1043a, ls1046a, ls1012) devices + * are not hardwired and are programmed by sw. There are a limited number + * of stream IDs available, and the partitioning of them is scenario + * dependent. This header defines the partitioning between legacy, PCI, + * and DPAA1 devices. + * + * This partitioning can be customized in this file depending + * on the specific hardware config: + * + * -non-PCI legacy, platform devices (USB, SDHC, SATA, DMA, QE etc) + * -all legacy devices get a unique stream ID assigned and programmed in + * their AMQR registers by u-boot + * + * -PCIe + * -there is a range of stream IDs set aside for PCI in this + * file. U-boot will scan the PCI bus and for each device discovered: + * -allocate a streamID + * -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID' + * -set a msi-map entry in the PEXn controller node in the + * device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt + * for more info on the msi-map definition) + * -set a iommu-map entry in the PEXn controller node in the + * device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt + * for more info on the iommu-map definition) + * + * -DPAA1 + * - Stream ids for DPAA1 use are reserved for future usecase. + * + */ + + +#define FSL_INVALID_STREAM_ID 0 + +/* legacy devices */ +#define FSL_USB1_STREAM_ID 1 +#define FSL_USB2_STREAM_ID 2 +#define FSL_USB3_STREAM_ID 3 +#define FSL_SDHC_STREAM_ID 4 +#define FSL_SATA_STREAM_ID 5 +#define FSL_QE_STREAM_ID 6 +#define FSL_QDMA_STREAM_ID 7 +#define FSL_EDMA_STREAM_ID 8 +#define FSL_ETR_STREAM_ID 9 +#define FSL_DEBUG_STREAM_ID 10 + +/* PCI - programmed in PEXn_LUT */ +#define FSL_PEX_STREAM_ID_START 11 +#define FSL_PEX_STREAM_ID_END 26 + +/* DPAA1 - Stream-ID that can be programmed in DPAA1 h/w */ +#define FSL_DPAA1_STREAM_ID_START 27 +#define FSL_DPAA1_STREAM_ID_END 63 + +struct icid_id_table { + const char *compat; + u32 id; + u32 reg; + phys_addr_t compat_addr; + phys_addr_t reg_addr; +}; + +struct fman_icid_id_table { + u32 port_id; + u32 icid; +}; + +#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr) \ + { \ + .compat = name, \ + .id = idA, \ + .reg = regA, \ + .compat_addr = compataddr, \ + .reg_addr = addr, \ + } + +#define SET_SCFG_ICID(compat, streamid, name, compataddr) \ + SET_ICID_ENTRY(compat, streamid, (((streamid) << 24) | (1 << 23)), \ + offsetof(struct ccsr_scfg, name) + LSCH2_SCFG_ADDR, \ + compataddr) + +#define SET_USB_ICID(usb_num, compat, streamid) \ + SET_SCFG_ICID(compat, streamid, usb##usb_num##_icid,\ + LSCH2_XHCI_USB##usb_num##_ADDR) + +#define SET_SATA_ICID(compat, streamid) \ + SET_SCFG_ICID(compat, streamid, sata_icid,\ + LSCH2_HCI_BASE_ADDR) + +#define SET_SDHC_ICID(streamid) \ + SET_SCFG_ICID("fsl,esdhc", streamid, sdhc_icid,\ + LSCH2_ESDHC_ADDR) + +#define QMAN_CQSIDR_REG 0x20a80 + +#define SET_QDMA_ICID(compat, streamid) \ + SET_ICID_ENTRY(compat, streamid, (1 << 31) | (streamid), \ + LSCH2_QDMA_BASE_ADDR + QMAN_CQSIDR_REG, \ + LSCH2_QDMA_BASE_ADDR), \ + SET_ICID_ENTRY(NULL, streamid, (1 << 31) | (streamid), \ + LSCH2_QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4, \ + LSCH2_QDMA_BASE_ADDR) + +#define SET_EDMA_ICID(streamid) \ + SET_SCFG_ICID("fsl,vf610-edma", streamid, edma_icid,\ + LSCH2_EDMA_BASE_ADDR) + +#define SET_ETR_ICID(streamid) \ + SET_SCFG_ICID(NULL, streamid, etr_icid, 0) + +#define SET_DEBUG_ICID(streamid) \ + SET_SCFG_ICID(NULL, streamid, debug_icid, 0) + +#define SET_QE_ICID(streamid) \ + SET_SCFG_ICID("fsl,qe", streamid, qe_icid,\ + LSCH2_QE_BASE_ADDR) + +#define SET_QMAN_ICID(streamid) \ + SET_ICID_ENTRY("fsl,qman", streamid, streamid, \ + offsetof(struct ccsr_qman, liodnr) + \ + LSCH2_QMAN_ADDR, \ + LSCH2_QMAN_ADDR) + +#define SET_BMAN_ICID(streamid) \ + SET_ICID_ENTRY("fsl,bman", streamid, streamid, \ + offsetof(struct ccsr_bman, liodnr) + \ + LSCH2_BMAN_ADDR, \ + LSCH2_BMAN_ADDR) + +#define SET_FMAN_ICID_ENTRY(_port_id, streamid) \ + { .port_id = (_port_id), .icid = (streamid) } + +#define SET_SEC_QI_ICID(streamid) \ + SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \ + 0, offsetof(ccsr_sec_t, qilcr_ls) + \ + LSCH2_SEC_ADDR, \ + LSCH2_SEC_ADDR) + +#define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \ + SET_ICID_ENTRY( \ + (CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT && \ + (FSL_SEC_JR##jr_num##_OFFSET == \ + SEC_JR3_OFFSET + CONFIG_SYS_FSL_SEC_OFFSET) \ + ? NULL \ + : "fsl,sec-v4.0-job-ring"), \ + streamid, \ + (((streamid) << 16) | (streamid)), \ + offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \ + LSCH2_SEC_ADDR, \ + FSL_SEC_JR##jr_num##_BASE_ADDR) + +#define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \ + SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \ + offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \ + LSCH2_SEC_ADDR, 0) + +#define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \ + SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \ + offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \ + LSCH2_SEC_ADDR, 0) + +static struct icid_id_table icid_tbl_ls1046a[] = { + SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START), + SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1), + + SET_SDHC_ICID(FSL_SDHC_STREAM_ID), + + SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID), + SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID), + SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID), + + SET_SATA_ICID("fsl,ls1046a-ahci", FSL_SATA_STREAM_ID), + SET_QDMA_ICID("fsl,ls1046a-qdma", FSL_QDMA_STREAM_ID), + SET_EDMA_ICID(FSL_EDMA_STREAM_ID), + SET_ETR_ICID(FSL_ETR_STREAM_ID), + SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID), +}; + +static struct fman_icid_id_table fman_icid_tbl_ls1046a[] = { + /* port id, icid */ + SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x03, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x04, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x05, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x06, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x07, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x08, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x09, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x0a, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x0b, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x0c, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x0d, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x28, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x29, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x2a, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x2b, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x2c, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x2d, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x10, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x11, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x30, FSL_DPAA1_STREAM_ID_END), + SET_FMAN_ICID_ENTRY(0x31, FSL_DPAA1_STREAM_ID_END), +}; + +static void set_icid(struct icid_id_table *tbl, int size) +{ + int i; + + for (i = 0; i < size; i++) + out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg); +} + +static void set_fman_icids(struct fman_icid_id_table *tbl, int size) +{ + int i; + struct ccsr_fman *fm = (void *)LSCH2_FM1_ADDR; + + for (i = 0; i < size; i++) { + out_be32(&fm->fm_bmi_common.fmbm_ppid[tbl[i].port_id - 1], + tbl[i].icid); + } +} + +static int set_icids(void) +{ + if (!of_machine_is_compatible("fsl,ls1046a")) + return 0; + + /* setup general icid offsets */ + set_icid(icid_tbl_ls1046a, ARRAY_SIZE(icid_tbl_ls1046a)); + + set_fman_icids(fman_icid_tbl_ls1046a, ARRAY_SIZE(fman_icid_tbl_ls1046a)); + + return 0; +} +postcore_initcall(set_icids); \ No newline at end of file diff --git a/arch/arm/mach-layerscape/include/mach/debug_ll.h b/arch/arm/mach-layerscape/include/mach/debug_ll.h new file mode 100644 index 0000000000..2658a4a7c9 --- /dev/null +++ b/arch/arm/mach-layerscape/include/mach/debug_ll.h @@ -0,0 +1,34 @@ +#ifndef __INCLUDE_ARCH_DEBUG_LL_H__ +#define __INCLUDE_ARCH_DEBUG_LL_H__ + +#include +#include + +#define __LS_UART_BASE(num) LSCH2_NS16550_COM##num +#define LS_UART_BASE(num) __LS_UART_BASE(num) + +static inline uint8_t debug_ll_read_reg(int reg) +{ + void __iomem *base = IOMEM(LS_UART_BASE(CONFIG_DEBUG_LAYERSCAPE_UART_PORT)); + + return readb(base + reg); +} + +static inline void debug_ll_write_reg(int reg, uint8_t val) +{ + void __iomem *base = IOMEM(LS_UART_BASE(CONFIG_DEBUG_LAYERSCAPE_UART_PORT)); + + writeb(val, base + reg); +} + +#include + +static inline void debug_ll_init(void) +{ + uint16_t divisor; + + divisor = debug_ll_ns16550_calc_divisor(300000000); + debug_ll_ns16550_init(divisor); +} + +#endif /* __INCLUDE_ARCH_DEBUG_LL_H__ */ diff --git a/arch/arm/mach-layerscape/include/mach/errata.h b/arch/arm/mach-layerscape/include/mach/errata.h new file mode 100644 index 0000000000..bdefa22172 --- /dev/null +++ b/arch/arm/mach-layerscape/include/mach/errata.h @@ -0,0 +1,7 @@ +#ifndef __MACH_ERRATA_H +#define __MACH_ERRATA_H + +void ls1046a_errata(void); +void ls1046a_errata_post_ddr(void); + +#endif /* __MACH_ERRATA_H */ diff --git a/arch/arm/mach-layerscape/include/mach/layerscape.h b/arch/arm/mach-layerscape/include/mach/layerscape.h new file mode 100644 index 0000000000..55e0b7bc96 --- /dev/null +++ b/arch/arm/mach-layerscape/include/mach/layerscape.h @@ -0,0 +1,7 @@ +#ifndef __MACH_LAYERSCAPE_H +#define __MACH_LAYERSCAPE_H + +#define LS1046A_DDR_SDRAM_BASE 0x80000000 +#define LS1046A_DDR_FREQ 2100000000 + +#endif /* __MACH_LAYERSCAPE_H */ diff --git a/arch/arm/mach-layerscape/include/mach/lowlevel.h b/arch/arm/mach-layerscape/include/mach/lowlevel.h new file mode 100644 index 0000000000..0f5f0f3aad --- /dev/null +++ b/arch/arm/mach-layerscape/include/mach/lowlevel.h @@ -0,0 +1,7 @@ +#ifndef __MACH_LOWLEVEL_H +#define __MACH_LOWLEVEL_H + +void ls1046a_init_lowlevel(void); +void ls1046a_init_l2_latency(void); + +#endif /* __MACH_LOWLEVEL_H */ diff --git a/arch/arm/mach-layerscape/lowlevel-ls1046a.c b/arch/arm/mach-layerscape/lowlevel-ls1046a.c new file mode 100644 index 0000000000..32f825ec25 --- /dev/null +++ b/arch/arm/mach-layerscape/lowlevel-ls1046a.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include +#include +#include +#include +#include +#include +#include +#include + +enum csu_cslx_access { + CSU_NS_SUP_R = 0x08, + CSU_NS_SUP_W = 0x80, + CSU_NS_SUP_RW = 0x88, + CSU_NS_USER_R = 0x04, + CSU_NS_USER_W = 0x40, + CSU_NS_USER_RW = 0x44, + CSU_S_SUP_R = 0x02, + CSU_S_SUP_W = 0x20, + CSU_S_SUP_RW = 0x22, + CSU_S_USER_R = 0x01, + CSU_S_USER_W = 0x10, + CSU_S_USER_RW = 0x11, + CSU_ALL_RW = 0xff, +}; + +struct csu_ns_dev { + unsigned long ind; + uint32_t val; +}; + +enum csu_cslx_ind { + CSU_CSLX_PCIE2_IO = 0, + CSU_CSLX_PCIE1_IO, + CSU_CSLX_MG2TPR_IP, + CSU_CSLX_IFC_MEM, + CSU_CSLX_OCRAM, + CSU_CSLX_GIC, + CSU_CSLX_PCIE1, + CSU_CSLX_OCRAM2, + CSU_CSLX_QSPI_MEM, + CSU_CSLX_PCIE2, + CSU_CSLX_SATA, + CSU_CSLX_USB1, + CSU_CSLX_QM_BM_SWPORTAL, + CSU_CSLX_PCIE3 = 16, + CSU_CSLX_PCIE3_IO, + CSU_CSLX_USB3 = 20, + CSU_CSLX_USB2, + CSU_CSLX_PFE = 23, + CSU_CSLX_SERDES = 32, + CSU_CSLX_QDMA, + CSU_CSLX_LPUART2, + CSU_CSLX_LPUART1, + CSU_CSLX_LPUART4, + CSU_CSLX_LPUART3, + CSU_CSLX_LPUART6, + CSU_CSLX_LPUART5, + CSU_CSLX_DSPI1 = 41, + CSU_CSLX_QSPI, + CSU_CSLX_ESDHC, + CSU_CSLX_IFC = 45, + CSU_CSLX_I2C1, + CSU_CSLX_USB_2, + CSU_CSLX_I2C3 = 48, + CSU_CSLX_I2C2, + CSU_CSLX_DUART2 = 50, + CSU_CSLX_DUART1, + CSU_CSLX_WDT2, + CSU_CSLX_WDT1, + CSU_CSLX_EDMA, + CSU_CSLX_SYS_CNT, + CSU_CSLX_DMA_MUX2, + CSU_CSLX_DMA_MUX1, + CSU_CSLX_DDR, + CSU_CSLX_QUICC, + CSU_CSLX_DCFG_CCU_RCPM = 60, + CSU_CSLX_SECURE_BOOTROM, + CSU_CSLX_SFP, + CSU_CSLX_TMU, + CSU_CSLX_SECURE_MONITOR, + CSU_CSLX_SCFG, + CSU_CSLX_FM = 66, + CSU_CSLX_SEC5_5, + CSU_CSLX_BM, + CSU_CSLX_QM, + CSU_CSLX_GPIO2 = 70, + CSU_CSLX_GPIO1, + CSU_CSLX_GPIO4, + CSU_CSLX_GPIO3, + CSU_CSLX_PLATFORM_CONT, + CSU_CSLX_CSU, + CSU_CSLX_IIC4 = 77, + CSU_CSLX_WDT4, + CSU_CSLX_WDT3, + CSU_CSLX_ESDHC2 = 80, + CSU_CSLX_WDT5 = 81, + CSU_CSLX_SAI2, + CSU_CSLX_SAI1, + CSU_CSLX_SAI4, + CSU_CSLX_SAI3, + CSU_CSLX_FTM2 = 86, + CSU_CSLX_FTM1, + CSU_CSLX_FTM4, + CSU_CSLX_FTM3, + CSU_CSLX_FTM6 = 90, + CSU_CSLX_FTM5, + CSU_CSLX_FTM8, + CSU_CSLX_FTM7, + CSU_CSLX_DSCR = 121, +}; + +static struct csu_ns_dev ns_dev[] = { + {CSU_CSLX_PCIE2_IO, CSU_ALL_RW}, + {CSU_CSLX_PCIE1_IO, CSU_ALL_RW}, + {CSU_CSLX_MG2TPR_IP, CSU_ALL_RW}, + {CSU_CSLX_IFC_MEM, CSU_ALL_RW}, + {CSU_CSLX_OCRAM, CSU_ALL_RW}, + {CSU_CSLX_GIC, CSU_ALL_RW}, + {CSU_CSLX_PCIE1, CSU_ALL_RW}, + {CSU_CSLX_OCRAM2, CSU_ALL_RW}, + {CSU_CSLX_QSPI_MEM, CSU_ALL_RW}, + {CSU_CSLX_PCIE2, CSU_ALL_RW}, + {CSU_CSLX_SATA, CSU_ALL_RW}, + {CSU_CSLX_USB1, CSU_ALL_RW}, + {CSU_CSLX_QM_BM_SWPORTAL, CSU_ALL_RW}, + {CSU_CSLX_PCIE3, CSU_ALL_RW}, + {CSU_CSLX_PCIE3_IO, CSU_ALL_RW}, + {CSU_CSLX_USB3, CSU_ALL_RW}, + {CSU_CSLX_USB2, CSU_ALL_RW}, + {CSU_CSLX_PFE, CSU_ALL_RW}, + {CSU_CSLX_SERDES, CSU_ALL_RW}, + {CSU_CSLX_QDMA, CSU_ALL_RW}, + {CSU_CSLX_LPUART2, CSU_ALL_RW}, + {CSU_CSLX_LPUART1, CSU_ALL_RW}, + {CSU_CSLX_LPUART4, CSU_ALL_RW}, + {CSU_CSLX_LPUART3, CSU_ALL_RW}, + {CSU_CSLX_LPUART6, CSU_ALL_RW}, + {CSU_CSLX_LPUART5, CSU_ALL_RW}, + {CSU_CSLX_DSPI1, CSU_ALL_RW}, + {CSU_CSLX_QSPI, CSU_ALL_RW}, + {CSU_CSLX_ESDHC, CSU_ALL_RW}, + {CSU_CSLX_IFC, CSU_ALL_RW}, + {CSU_CSLX_I2C1, CSU_ALL_RW}, + {CSU_CSLX_I2C3, CSU_ALL_RW}, + {CSU_CSLX_I2C2, CSU_ALL_RW}, + {CSU_CSLX_DUART2, CSU_ALL_RW}, + {CSU_CSLX_DUART1, CSU_ALL_RW}, + {CSU_CSLX_WDT2, CSU_ALL_RW}, + {CSU_CSLX_WDT1, CSU_ALL_RW}, + {CSU_CSLX_EDMA, CSU_ALL_RW}, + {CSU_CSLX_SYS_CNT, CSU_ALL_RW}, + {CSU_CSLX_DMA_MUX2, CSU_ALL_RW}, + {CSU_CSLX_DMA_MUX1, CSU_ALL_RW}, + {CSU_CSLX_DDR, CSU_ALL_RW}, + {CSU_CSLX_QUICC, CSU_ALL_RW}, + {CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW}, + {CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW}, + {CSU_CSLX_SFP, CSU_ALL_RW}, + {CSU_CSLX_TMU, CSU_ALL_RW}, + {CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW}, + {CSU_CSLX_SCFG, CSU_ALL_RW}, + {CSU_CSLX_FM, CSU_ALL_RW}, + {CSU_CSLX_SEC5_5, CSU_ALL_RW}, + {CSU_CSLX_BM, CSU_ALL_RW}, + {CSU_CSLX_QM, CSU_ALL_RW}, + {CSU_CSLX_GPIO2, CSU_ALL_RW}, + {CSU_CSLX_GPIO1, CSU_ALL_RW}, + {CSU_CSLX_GPIO4, CSU_ALL_RW}, + {CSU_CSLX_GPIO3, CSU_ALL_RW}, + {CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW}, + {CSU_CSLX_CSU, CSU_ALL_RW}, + {CSU_CSLX_IIC4, CSU_ALL_RW}, + {CSU_CSLX_WDT4, CSU_ALL_RW}, + {CSU_CSLX_WDT3, CSU_ALL_RW}, + {CSU_CSLX_ESDHC2, CSU_ALL_RW}, + {CSU_CSLX_WDT5, CSU_ALL_RW}, + {CSU_CSLX_SAI2, CSU_ALL_RW}, + {CSU_CSLX_SAI1, CSU_ALL_RW}, + {CSU_CSLX_SAI4, CSU_ALL_RW}, + {CSU_CSLX_SAI3, CSU_ALL_RW}, + {CSU_CSLX_FTM2, CSU_ALL_RW}, + {CSU_CSLX_FTM1, CSU_ALL_RW}, + {CSU_CSLX_FTM4, CSU_ALL_RW}, + {CSU_CSLX_FTM3, CSU_ALL_RW}, + {CSU_CSLX_FTM6, CSU_ALL_RW}, + {CSU_CSLX_FTM5, CSU_ALL_RW}, + {CSU_CSLX_FTM8, CSU_ALL_RW}, + {CSU_CSLX_FTM7, CSU_ALL_RW}, + {CSU_CSLX_DSCR, CSU_ALL_RW}, +}; + +static void set_devices_ns_access(unsigned long index, u16 val) +{ + u32 *base = IOMEM(LSCH2_CSU_ADDR); + u32 *reg; + uint32_t tmp; + + reg = base + index / 2; + tmp = in_be32(reg); + if (index % 2 == 0) { + tmp &= 0x0000ffff; + tmp |= val << 16; + } else { + tmp &= 0xffff0000; + tmp |= val; + } + + out_be32(reg, tmp); +} + +static void init_csu(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ns_dev); i++) + set_devices_ns_access(ns_dev[i].ind, ns_dev[i].val); +} + +void ls1046a_init_lowlevel(void) +{ + struct ccsr_cci400 __iomem *cci = IOMEM(LSCH2_CCI400_ADDR); + struct ccsr_scfg *scfg = IOMEM(LSCH2_SCFG_ADDR); + + init_csu(); + ls1046a_init_l2_latency(); + set_cntfrq(25000000); + syscnt_enable(IOMEM(LSCH2_SYS_COUNTER_ADDR)); + + /* Make SEC reads and writes snoopable */ + setbits_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SECRDSNP | + SCFG_SNPCNFGCR_SECWRSNP | + SCFG_SNPCNFGCR_SATARDSNP | + SCFG_SNPCNFGCR_SATAWRSNP); + + /* + * Enable snoop requests and DVM message requests for + * Slave insterface S4 (A53 core cluster) + */ + if (current_el() == 3) { + out_le32(&cci->slave[4].snoop_ctrl, + CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN); + } + + ls1046a_errata(); +} diff --git a/arch/arm/mach-layerscape/lowlevel.S b/arch/arm/mach-layerscape/lowlevel.S new file mode 100644 index 0000000000..adb3e54367 --- /dev/null +++ b/arch/arm/mach-layerscape/lowlevel.S @@ -0,0 +1,18 @@ +#include + +.section .text.ls1046a_init_l2_latency +ENTRY(ls1046a_init_l2_latency) + /* Initialize the L2 RAM latency */ + mrs x1, S3_1_c11_c0_2 + mov x0, #0x1C7 + /* Clear L2 Tag RAM latency and L2 Data RAM latency */ + bic x1, x1, x0 + /* Set L2 data ram latency bits [2:0] */ + orr x1, x1, #0x2 + /* set L2 tag ram latency bits [8:6] */ + orr x1, x1, #0x80 + msr S3_1_c11_c0_2, x1 + isb + + ret +ENDPROC(ls1046a_init_l2_latency); diff --git a/common/Kconfig b/common/Kconfig index 43b657019f..c31774340c 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1236,6 +1236,14 @@ config DEBUG_SOCFPGA_UART_CLOCK help Choose UART root clock. +config DEBUG_LAYERSCAPE_UART_PORT + int "Layerscape UART port selection" + depends on ARCH_LAYERSCAPE + default 1 + help + Select the UART port number used for early debugging here. Port + numbers start counting from 1. + config DEBUG_INITCALLS bool "Trace initcalls" help diff --git a/images/Makefile b/images/Makefile index c0ad500303..542cfdb22c 100644 --- a/images/Makefile +++ b/images/Makefile @@ -145,6 +145,7 @@ include $(srctree)/images/Makefile.vexpress include $(srctree)/images/Makefile.xburst include $(srctree)/images/Makefile.at91 include $(srctree)/images/Makefile.zynqmp +include $(srctree)/images/Makefile.layerscape ifneq ($(pblx-y)$(pblx-),) $(error pblx- has been removed. Please use pblb- instead.) @@ -179,5 +180,5 @@ $(flash-list): $(image-y-path) clean-files := *.pbl *.pblb *.map start_*.imximg *.img barebox.z start_*.kwbimg \ start_*.kwbuartimg *.socfpgaimg *.mlo *.t20img *.t20img.cfg *.t30img \ *.t30img.cfg *.t124img *.t124img.cfg *.mlospi *.mlo *.mxsbs *.mxssd \ - start_*.simximg start_*.usimximg *.imx-sram-img + start_*.simximg start_*.usimximg *.imx-sram-img *.image clean-files += pbl.lds diff --git a/images/Makefile.layerscape b/images/Makefile.layerscape new file mode 100644 index 0000000000..81838b404a --- /dev/null +++ b/images/Makefile.layerscape @@ -0,0 +1,18 @@ +# +# barebox image generation Makefile for NXP Layerscape images +# + +lspbl_cfg_cpp_flags = -Wp,-MD,$(depfile) -nostdinc -x assembler-with-cpp \ + -I $(srctree)/include -include include/generated/autoconf.h + +lspbl-rcw-tmp = $(subst $(comma),_,$(dot-target).lspbl_rcw.tmp) +lspbl-pbi-tmp = $(subst $(comma),_,$(dot-target).lspbl_pbi.tmp) + +quiet_cmd_lspbl_image = LSPBL-IMG $@ + cmd_lspbl_image = $(CPP) $(lspbl_cfg_cpp_flags) -o $(lspbl-rcw-tmp) $(word 2,$^) ; \ + $(CPP) $(lspbl_cfg_cpp_flags) -o $(lspbl-pbi-tmp) $(word 3,$^) ; \ + $(objtree)/scripts/pblimage -o $@ -r $(lspbl-rcw-tmp) \ + -m $($(patsubst $(obj)/%.pblb,PBL_CODE_SIZE_%,$<)) -p $(lspbl-pbi-tmp) -i $< + +$(obj)/%.lspblimg: $(obj)/% FORCE + $(call if_changed,lspbl_image,$(RCW_$(@F)),$(PBI_$(@F)),) diff --git a/include/soc/fsl/fsl_qbman.h b/include/soc/fsl/fsl_qbman.h new file mode 100644 index 0000000000..4687eb9bb1 --- /dev/null +++ b/include/soc/fsl/fsl_qbman.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2017 NXP + */ + +#ifndef __FSL_QBMAN_H__ +#define __FSL_QBMAN_H__ +void fdt_fixup_qportals(void *blob); +void fdt_fixup_bportals(void *blob); +void inhibit_portals(void __iomem *addr, int max_portals, + int arch_max_portals, int portal_cinh_size); +void setup_qbman_portals(void); + +struct ccsr_qman { +#ifdef CONFIG_SYS_FSL_QMAN_V3 + u8 res0[0x200]; +#else + struct { + u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ + u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ + u32 res; + u32 qcsp_dd_cfg; /* 0xc - SW Portal Dynamic Debug cfg */ + } qcsp[32]; +#endif + /* Not actually reserved, but irrelevant to u-boot */ + u8 res[0xbf8 - 0x200]; + u32 ip_rev_1; + u32 ip_rev_2; + u32 fqd_bare; /* FQD Extended Base Addr Register */ + u32 fqd_bar; /* FQD Base Addr Register */ + u8 res1[0x8]; + u32 fqd_ar; /* FQD Attributes Register */ + u8 res2[0xc]; + u32 pfdr_bare; /* PFDR Extended Base Addr Register */ + u32 pfdr_bar; /* PFDR Base Addr Register */ + u8 res3[0x8]; + u32 pfdr_ar; /* PFDR Attributes Register */ + u8 res4[0x4c]; + u32 qcsp_bare; /* QCSP Extended Base Addr Register */ + u32 qcsp_bar; /* QCSP Base Addr Register */ + u8 res5[0x78]; + u32 ci_sched_cfg; /* Initiator Scheduling Configuration */ + u32 srcidr; /* Source ID Register */ + u32 liodnr; /* LIODN Register */ + u8 res6[4]; + u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */ + u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */ + u8 res7[0x2e8]; +#ifdef CONFIG_SYS_FSL_QMAN_V3 + struct { + u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ + u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ + u32 res; + u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg*/ + } qcsp[50]; +#endif +}; + +struct ccsr_bman { + /* Not actually reserved, but irrelevant to u-boot */ + u8 res[0xbf8]; + u32 ip_rev_1; + u32 ip_rev_2; + u32 fbpr_bare; /* FBPR Extended Base Addr Register */ + u32 fbpr_bar; /* FBPR Base Addr Register */ + u8 res1[0x8]; + u32 fbpr_ar; /* FBPR Attributes Register */ + u8 res2[0xf0]; + u32 srcidr; /* Source ID Register */ + u32 liodnr; /* LIODN Register */ + u8 res7[0x2f4]; +}; + +#endif /* __FSL_QBMAN_H__ */ diff --git a/include/soc/fsl/immap_lsch2.h b/include/soc/fsl/immap_lsch2.h new file mode 100644 index 0000000000..4eb6658788 --- /dev/null +++ b/include/soc/fsl/immap_lsch2.h @@ -0,0 +1,355 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2013-2015 Freescale Semiconductor, Inc. + */ + +#ifndef __ARCH_FSL_LSCH2_IMMAP_H__ +#define __ARCH_FSL_LSCH2_IMMAP_H__ + +#define gur_in32(a) in_be32(a) +#define gur_out32(a, v) out_be32(a, v) + +#define LSCH2_IMMR 0x01000000 + +#define LSCH2_DDR_ADDR (LSCH2_IMMR + 0x00080000) +#define LSCH2_CCI400_ADDR (LSCH2_IMMR + 0x00180000) +#define LSCH2_GIC400_ADDR (LSCH2_IMMR + 0x00400000) +#define LSCH2_IFC_ADDR (LSCH2_IMMR + 0x00530000) +#define LSCH2_QSPI0_BASE_ADDR (LSCH2_IMMR + 0x00550000) +#define LSCH2_ESDHC_ADDR (LSCH2_IMMR + 0x00560000) +#define LSCH2_CSU_ADDR (LSCH2_IMMR + 0x00510000) +#define LSCH2_SCFG_ADDR (LSCH2_IMMR + 0x00570000) +#define LSCH2_BMAN_ADDR (LSCH2_IMMR + 0x00890000) +#define LSCH2_QMAN_ADDR (LSCH2_IMMR + 0x00880000) +#define LSCH2_FM1_ADDR (LSCH2_IMMR + 0x00a00000) +#define LSCH2_FM1_DTSEC1_ADDR (LSCH2_IMMR + 0x00ae0000) +#define LSCH2_SEC_MON_ADDR (LSCH2_IMMR + 0x00e90000) +#define LSCH2_SFP_ADDR (LSCH2_IMMR + 0x00e80200) +#define LSCH2_GUTS_ADDR (LSCH2_IMMR + 0x00ee0000) +#define LSCH2_RST_ADDR (LSCH2_IMMR + 0x00ee00b0) +#define LSCH2_FMAN_ADDR (LSCH2_IMMR + 0x00a00000) +#define LSCH2_SERDES_ADDR (LSCH2_IMMR + 0x00ea0000) +#define LSCH2_DCFG_ADDR (LSCH2_IMMR + 0x00ee0000) +#define LSCH2_CLK_ADDR (LSCH2_IMMR + 0x00ee1000) +#define LSCH2_DSPI1_BASE_ADDR (LSCH2_IMMR + 0x01100000) +#define LSCH2_I2C1_BASE_ADDR (LSCH2_IMMR + 0x01180000) +#define LSCH2_I2C2_BASE_ADDR (LSCH2_IMMR + 0x01190000) +#define LSCH2_I2C3_BASE_ADDR (LSCH2_IMMR + 0x011a0000) +#define LSCH2_I2C4_BASE_ADDR (LSCH2_IMMR + 0x011b0000) +#define LSCH2_NS16550_COM1 (LSCH2_IMMR + 0x011c0500) +#define LSCH2_NS16550_COM2 (LSCH2_IMMR + 0x011c0600) +#define LSCH2_NS16550_COM3 (LSCH2_IMMR + 0x011d0500) +#define LSCH2_NS16550_COM4 (LSCH2_IMMR + 0x011d0600) +#define LSCH2_GPIO1_BASE_ADDR (LSCH2_IMMR + 0x01300000) +#define LSCH2_GPIO2_BASE_ADDR (LSCH2_IMMR + 0x01310000) +#define LSCH2_GPIO3_BASE_ADDR (LSCH2_IMMR + 0x01320000) +#define LSCH2_GPIO4_BASE_ADDR (LSCH2_IMMR + 0x01330000) +#define LSCH2_QE_BASE_ADDR (LSCH2_IMMR + 0x01400000) +#define LSCH2_LPUART_BASE (LSCH2_IMMR + 0x01950000) +#define LSCH2_WDOG1_BASE_ADDR (LSCH2_IMMR + 0x01ad0000) +#define LSCH2_SYS_COUNTER_ADDR (LSCH2_IMMR + 0x01b00000) +#define LSCH2_EDMA_BASE_ADDR (LSCH2_IMMR + 0x01c00000) +#define LSCH2_XHCI_USB1_ADDR (LSCH2_IMMR + 0x01f00000) +#define LSCH2_XHCI_USB2_ADDR (LSCH2_IMMR + 0x02000000) +#define LSCH2_XHCI_USB3_ADDR (LSCH2_IMMR + 0x02100000) +#define LSCH2_HCI_BASE_ADDR (LSCH2_IMMR + 0x02200000) +#define LSCH2_PCIE1_ADDR (LSCH2_IMMR + 0x02400000) +#define LSCH2_PCIE2_ADDR (LSCH2_IMMR + 0x02500000) +#define LSCH2_PCIE3_ADDR (LSCH2_IMMR + 0x02600000) +#define LSCH2_QDMA_BASE_ADDR (LSCH2_IMMR + 0x07380000) +#define LSCH2_EHCI_USB1_ADDR (LSCH2_IMMR + 0x07600000) + +struct ccsr_gur { + u32 porsr1; /* POR status 1 */ +#define FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK 0xFF800000 + u32 porsr2; /* POR status 2 */ + u8 res_008[0x20-0x8]; + u32 gpporcr1; /* General-purpose POR configuration */ + u32 gpporcr2; +#define FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT 25 +#define FSL_CHASSIS2_DCFG_FUSESR_VID_MASK 0x1F +#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT 20 +#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK 0x1F + u32 dcfg_fusesr; /* Fuse status register */ + u8 res_02c[0x70-0x2c]; + u32 devdisr; /* Device disable control */ +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_1 0x80000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_2 0x40000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_3 0x20000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_4 0x10000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_5 0x08000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_6 0x04000000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_9 0x00800000 +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_10 0x00400000 +#define FSL_CHASSIS2_DEVDISR2_10GEC1_1 0x00800000 +#define FSL_CHASSIS2_DEVDISR2_10GEC1_2 0x00400000 +#define FSL_CHASSIS2_DEVDISR2_10GEC1_3 0x80000000 +#define FSL_CHASSIS2_DEVDISR2_10GEC1_4 0x40000000 + u32 devdisr2; /* Device disable control 2 */ + u32 devdisr3; /* Device disable control 3 */ + u32 devdisr4; /* Device disable control 4 */ + u32 devdisr5; /* Device disable control 5 */ + u32 devdisr6; /* Device disable control 6 */ + u32 devdisr7; /* Device disable control 7 */ + u8 res_08c[0x94-0x8c]; + u32 coredisru; /* uppper portion for support of 64 cores */ + u32 coredisrl; /* lower portion for support of 64 cores */ + u8 res_09c[0xa0-0x9c]; + u32 pvr; /* Processor version */ + u32 svr; /* System version */ + u32 mvr; /* Manufacturing version */ + u8 res_0ac[0xb0-0xac]; + u32 rstcr; /* Reset control */ + u32 rstrqpblsr; /* Reset request preboot loader status */ + u8 res_0b8[0xc0-0xb8]; + u32 rstrqmr1; /* Reset request mask */ + u8 res_0c4[0xc8-0xc4]; + u32 rstrqsr1; /* Reset request status */ + u8 res_0cc[0xd4-0xcc]; + u32 rstrqwdtmrl; /* Reset request WDT mask */ + u8 res_0d8[0xdc-0xd8]; + u32 rstrqwdtsrl; /* Reset request WDT status */ + u8 res_0e0[0xe4-0xe0]; + u32 brrl; /* Boot release */ + u8 res_0e8[0x100-0xe8]; + u32 rcwsr[16]; /* Reset control word status */ +#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT 25 +#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK 0x1f +#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT 16 +#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK 0x3f +#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK 0xffff0000 +#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT 16 +#define FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK 0x0000ffff +#define FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT 0 +#define RCW_SB_EN_REG_INDEX 7 +#define RCW_SB_EN_MASK 0x00200000 + + u8 res_140[0x200-0x140]; + u32 scratchrw[4]; /* Scratch Read/Write */ + u8 res_210[0x300-0x210]; + u32 scratchw1r[4]; /* Scratch Read (Write once) */ + u8 res_310[0x400-0x310]; + u32 crstsr[12]; + u8 res_430[0x500-0x430]; + + /* PCI Express n Logical I/O Device Number register */ + u32 dcfg_ccsr_pex1liodnr; + u32 dcfg_ccsr_pex2liodnr; + u32 dcfg_ccsr_pex3liodnr; + u32 dcfg_ccsr_pex4liodnr; + /* RIO n Logical I/O Device Number register */ + u32 dcfg_ccsr_rio1liodnr; + u32 dcfg_ccsr_rio2liodnr; + u32 dcfg_ccsr_rio3liodnr; + u32 dcfg_ccsr_rio4liodnr; + /* USB Logical I/O Device Number register */ + u32 dcfg_ccsr_usb1liodnr; + u32 dcfg_ccsr_usb2liodnr; + u32 dcfg_ccsr_usb3liodnr; + u32 dcfg_ccsr_usb4liodnr; + /* SD/MMC Logical I/O Device Number register */ + u32 dcfg_ccsr_sdmmc1liodnr; + u32 dcfg_ccsr_sdmmc2liodnr; + u32 dcfg_ccsr_sdmmc3liodnr; + u32 dcfg_ccsr_sdmmc4liodnr; + /* RIO Message Unit Logical I/O Device Number register */ + u32 dcfg_ccsr_riomaintliodnr; + + u8 res_544[0x550-0x544]; + u32 sataliodnr[4]; + u8 res_560[0x570-0x560]; + + u32 dcfg_ccsr_misc1liodnr; + u32 dcfg_ccsr_misc2liodnr; + u32 dcfg_ccsr_misc3liodnr; + u32 dcfg_ccsr_misc4liodnr; + u32 dcfg_ccsr_dma1liodnr; + u32 dcfg_ccsr_dma2liodnr; + u32 dcfg_ccsr_dma3liodnr; + u32 dcfg_ccsr_dma4liodnr; + u32 dcfg_ccsr_spare1liodnr; + u32 dcfg_ccsr_spare2liodnr; + u32 dcfg_ccsr_spare3liodnr; + u32 dcfg_ccsr_spare4liodnr; + u8 res_5a0[0x600-0x5a0]; + u32 dcfg_ccsr_pblsr; + + u32 pamubypenr; + u32 dmacr1; + + u8 res_60c[0x610-0x60c]; + u32 dcfg_ccsr_gensr1; + u32 dcfg_ccsr_gensr2; + u32 dcfg_ccsr_gensr3; + u32 dcfg_ccsr_gensr4; + u32 dcfg_ccsr_gencr1; + u32 dcfg_ccsr_gencr2; + u32 dcfg_ccsr_gencr3; + u32 dcfg_ccsr_gencr4; + u32 dcfg_ccsr_gencr5; + u32 dcfg_ccsr_gencr6; + u32 dcfg_ccsr_gencr7; + u8 res_63c[0x658-0x63c]; + u32 dcfg_ccsr_cgensr1; + u32 dcfg_ccsr_cgensr0; + u8 res_660[0x678-0x660]; + u32 dcfg_ccsr_cgencr1; + + u32 dcfg_ccsr_cgencr0; + u8 res_680[0x700-0x680]; + u32 dcfg_ccsr_sriopstecr; + u32 dcfg_ccsr_dcsrcr; + + u8 res_708[0x740-0x708]; /* add more registers when needed */ + u32 tp_ityp[64]; /* Topology Initiator Type Register */ + struct { + u32 upper; + u32 lower; + } tp_cluster[16]; + u8 res_8c0[0xa00-0x8c0]; /* add more registers when needed */ + u32 dcfg_ccsr_qmbm_warmrst; + u8 res_a04[0xa20-0xa04]; /* add more registers when needed */ + u32 dcfg_ccsr_reserved0; + u32 dcfg_ccsr_reserved1; +}; + +#define SCFG_QSPI_CLKSEL 0x40100000 +#define SCFG_USBDRVVBUS_SELCR_USB1 0x00000000 +#define SCFG_USBDRVVBUS_SELCR_USB2 0x00000001 +#define SCFG_USBDRVVBUS_SELCR_USB3 0x00000002 +#define SCFG_USBPWRFAULT_INACTIVE 0x00000000 +#define SCFG_USBPWRFAULT_SHARED 0x00000001 +#define SCFG_USBPWRFAULT_DEDICATED 0x00000002 +#define SCFG_USBPWRFAULT_USB3_SHIFT 4 +#define SCFG_USBPWRFAULT_USB2_SHIFT 2 +#define SCFG_USBPWRFAULT_USB1_SHIFT 0 + +#define SCFG_USB3PRM1CR_USB1 0x070 +#define SCFG_USB3PRM2CR_USB1 0x074 +#define SCFG_USB3PRM1CR_USB2 0x07C +#define SCFG_USB3PRM2CR_USB2 0x080 +#define SCFG_USB3PRM1CR_USB3 0x088 +#define SCFG_USB3PRM2CR_USB3 0x08c +#define SCFG_USB_TXVREFTUNE 0x9 +#define SCFG_USB_SQRXTUNE_MASK 0x7 +#define SCFG_USB_PCSTXSWINGFULL 0x47 +#define SCFG_USB_PHY1 0x084F0000 +#define SCFG_USB_PHY2 0x08500000 +#define SCFG_USB_PHY3 0x08510000 +#define SCFG_USB_PHY_RX_OVRD_IN_HI 0x200c +#define USB_PHY_RX_EQ_VAL_1 0x0000 +#define USB_PHY_RX_EQ_VAL_2 0x0080 +#define USB_PHY_RX_EQ_VAL_3 0x0380 +#define USB_PHY_RX_EQ_VAL_4 0x0b80 + +#define SCFG_SNPCNFGCR_SECRDSNP 0x80000000 +#define SCFG_SNPCNFGCR_SECWRSNP 0x40000000 +#define SCFG_SNPCNFGCR_SATARDSNP 0x00800000 +#define SCFG_SNPCNFGCR_SATAWRSNP 0x00400000 + +/* RGMIIPCR bit definitions*/ +#define SCFG_RGMIIPCR_EN_AUTO BIT(3) +#define SCFG_RGMIIPCR_SETSP_1000M BIT(2) +#define SCFG_RGMIIPCR_SETSP_100M 0 +#define SCFG_RGMIIPCR_SETSP_10M BIT(1) +#define SCFG_RGMIIPCR_SETFD BIT(0) + +/* PFEASBCR bit definitions */ +#define SCFG_PFEASBCR_ARCACHE0 BIT(31) +#define SCFG_PFEASBCR_AWCACHE0 BIT(30) +#define SCFG_PFEASBCR_ARCACHE1 BIT(29) +#define SCFG_PFEASBCR_AWCACHE1 BIT(28) +#define SCFG_PFEASBCR_ARSNP BIT(27) +#define SCFG_PFEASBCR_AWSNP BIT(26) + +/* WR_QoS1 PFE bit definitions */ +#define SCFG_WR_QOS1_PFE1_QOS GENMASK(27, 24) +#define SCFG_WR_QOS1_PFE2_QOS GENMASK(23, 20) + +/* RD_QoS1 PFE bit definitions */ +#define SCFG_RD_QOS1_PFE1_QOS GENMASK(27, 24) +#define SCFG_RD_QOS1_PFE2_QOS GENMASK(23, 20) + +/* Supplemental Configuration Unit */ +struct ccsr_scfg { + u8 res_000[0x100-0x000]; + u32 usb2_icid; + u32 usb3_icid; + u8 res_108[0x114-0x108]; + u32 dma_icid; + u32 sata_icid; + u32 usb1_icid; + u32 qe_icid; + u32 sdhc_icid; + u32 edma_icid; + u32 etr_icid; + u32 core_sft_rst[4]; + u8 res_140[0x158-0x140]; + u32 altcbar; + u32 qspi_cfg; + u8 res_160[0x164 - 0x160]; + u32 wr_qos1; + u32 wr_qos2; + u32 rd_qos1; + u32 rd_qos2; + u8 res_174[0x180 - 0x174]; + u32 dmamcr; + u8 res_184[0x188-0x184]; + u32 gic_align; + u32 debug_icid; + u8 res_190[0x1a4-0x190]; + u32 snpcnfgcr; + u8 res_1a8[0x1ac-0x1a8]; + u32 intpcr; + u8 res_1b0[0x204-0x1b0]; + u32 coresrencr; + u8 res_208[0x220-0x208]; + u32 rvbar0_0; + u32 rvbar0_1; + u32 rvbar1_0; + u32 rvbar1_1; + u32 rvbar2_0; + u32 rvbar2_1; + u32 rvbar3_0; + u32 rvbar3_1; + u32 lpmcsr; + u8 res_244[0x400-0x244]; + u32 qspidqscr; + u32 ecgtxcmcr; + u32 sdhciovselcr; + u32 rcwpmuxcr0; + u32 usbdrvvbus_selcr; + u32 usbpwrfault_selcr; + u32 usb_refclk_selcr1; + u32 usb_refclk_selcr2; + u32 usb_refclk_selcr3; + u8 res_424[0x434 - 0x424]; + u32 rgmiipcr; + u32 res_438; + u32 rgmiipsr; + u32 pfepfcssr1; + u32 pfeintencr1; + u32 pfepfcssr2; + u32 pfeintencr2; + u32 pfeerrcr; + u32 pfeeerrintencr; + u32 pfeasbcr; + u32 pfebsbcr; + u8 res_460[0x484 - 0x460]; + u32 mdioselcr; + u8 res_468[0x600 - 0x488]; + u32 scratchrw[4]; + u8 res_610[0x680-0x610]; + u32 corebcr; + u8 res_684[0x1000-0x684]; + u32 pex1msiir; + u32 pex1msir; + u8 res_1008[0x2000-0x1008]; + u32 pex2; + u32 pex2msir; + u8 res_2008[0x3000-0x2008]; + u32 pex3msiir; + u32 pex3msir; +}; + +#endif /* __ARCH_FSL_LSCH2_IMMAP_H__*/ -- 2.20.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox