mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 15/15] ARM: Add layerscape_defconfig
Date: Wed, 13 Mar 2019 10:42:02 +0100	[thread overview]
Message-ID: <20190313094202.14901-16-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20190313094202.14901-1-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/layerscape_defconfig | 111 ++++++++++++++++++++++++++
 1 file changed, 111 insertions(+)
 create mode 100644 arch/arm/configs/layerscape_defconfig

diff --git a/arch/arm/configs/layerscape_defconfig b/arch/arm/configs/layerscape_defconfig
new file mode 100644
index 0000000000..dadbcc214c
--- /dev/null
+++ b/arch/arm/configs/layerscape_defconfig
@@ -0,0 +1,111 @@
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_MACH_LS1046ARDB=y
+CONFIG_MACH_TQMLS1046A=y
+CONFIG_MMU=y
+CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_RELOCATABLE=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE=y
+CONFIG_BOOTM_OFTREE_UIMAGE=y
+CONFIG_BLSPEC=y
+CONFIG_CONSOLE_ACTIVATE_NONE=y
+CONFIG_CONSOLE_ALLOW_COLOR=y
+CONFIG_PBL_CONSOLE=y
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_RESET_SOURCE=y
+CONFIG_DEBUG_LL=y
+CONFIG_CMD_DMESG=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_MMC_EXTCSD=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_READF=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_MENUTREE=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_WD=y
+CONFIG_CMD_BAREBOX_UPDATE=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_NET=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_OFDEVICE=y
+CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_DRIVER_NET_FSL_FMAN=y
+CONFIG_DP83867_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_I2C=y
+CONFIG_I2C_IMX=y
+CONFIG_MCI=y
+CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+CONFIG_MCI_IMX_ESDHC=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_EEPROM_AT25=y
+CONFIG_EEPROM_AT24=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_IMX=y
+CONFIG_NVMEM=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_ZLIB=y
+CONFIG_LZO_DECOMPRESS=y
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2019-03-13  9:42 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-13  9:41 [PATCH 00/15] barebox Layerscape support Sascha Hauer
2019-03-13  9:41 ` [PATCH 01/15] mci: imx-esdhc: Actually enable cache snooping Sascha Hauer
2019-03-13  9:41 ` [PATCH 02/15] Add Freescale QUICC Engine firmware support Sascha Hauer
2019-03-13  9:41 ` [PATCH 03/15] net: Add Freescale FMan ethernet support Sascha Hauer
2019-03-13  9:41 ` [PATCH 04/15] ARM: Add arm64 pbl udelay Sascha Hauer
2019-03-19 18:12   ` Andrey Smirnov
2019-03-20  8:16     ` Sascha Hauer
2019-03-22  6:41       ` Andrey Smirnov
2019-03-13  9:41 ` [PATCH 05/15] esdhc-xload: Add support for Layerscape Sascha Hauer
2019-03-13  9:41 ` [PATCH 06/15] watchdog: imx: Add register accessor functions Sascha Hauer
2019-03-13  9:41 ` [PATCH 07/15] watchdog: imx: Add big endian register access support Sascha Hauer
2019-03-13  9:41 ` [PATCH 08/15] scripts: Add Layerscape image tool Sascha Hauer
2019-03-13  9:41 ` [PATCH 09/15] i2c: i.MX: Add layerscape support Sascha Hauer
2019-03-13  9:41 ` [PATCH 10/15] ddr: fsl: Add Freescale ddr driver Sascha Hauer
2019-03-13  9:41 ` [PATCH 11/15] ARM: Add basic Layerscape support Sascha Hauer
2019-03-13  9:41 ` [PATCH 12/15] clk: Add Layerscape clk support Sascha Hauer
2019-03-13  9:42 ` [PATCH 13/15] ARM: Layerscape: Add LS1046a RDB board support Sascha Hauer
2019-03-13  9:42 ` [PATCH 14/15] ARM: Layerscape: Add TQ TQMLS1046a " Sascha Hauer
2019-03-13  9:42 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190313094202.14901-16-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox