mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 07/15] watchdog: imx: Add big endian register access support
Date: Wed, 13 Mar 2019 10:41:54 +0100	[thread overview]
Message-ID: <20190313094202.14901-8-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20190313094202.14901-1-s.hauer@pengutronix.de>

Layerscape SoCs feature the same watchdog as the i.MX SoCs, but in big
endian mode. Add support for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/watchdog/Kconfig  |  2 +-
 drivers/watchdog/Makefile |  1 +
 drivers/watchdog/imxwd.c  | 12 ++++++++++--
 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2793ee93d9..04efb1a3c8 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -48,7 +48,7 @@ config WATCHDOG_MXS28
 
 config WATCHDOG_IMX
 	bool "i.MX watchdog"
-	depends on ARCH_IMX
+	depends on ARCH_IMX || ARCH_LAYERSCAPE
 	help
 	  Add support for watchdog found on Freescale i.MX SoCs.
 
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 69189ba1f3..6c8d36c8b8 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_WATCHDOG_MXS28) += im28wd.o
 obj-$(CONFIG_WATCHDOG_DW) += dw_wdt.o
 obj-$(CONFIG_WATCHDOG_JZ4740) += jz4740.o
 obj-$(CONFIG_WATCHDOG_IMX_RESET_SOURCE) += imxwd.o
+obj-$(CONFIG_WATCHDOG_IMX) += imxwd.o
 obj-$(CONFIG_WATCHDOG_ORION) += orion_wdt.o
 obj-$(CONFIG_ARCH_BCM283X) += bcm2835_wdt.o
 obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
diff --git a/drivers/watchdog/imxwd.c b/drivers/watchdog/imxwd.c
index e2c3b9f96e..77a3bd76ce 100644
--- a/drivers/watchdog/imxwd.c
+++ b/drivers/watchdog/imxwd.c
@@ -38,6 +38,7 @@ struct imx_wd {
 	const struct imx_wd_ops *ops;
 	struct restart_handler restart;
 	bool ext_reset;
+	bool bigendian;
 };
 
 #define to_imx_wd(h) container_of(h, struct imx_wd, wd)
@@ -68,12 +69,18 @@ struct imx_wd {
 
 static void imxwd_write(struct imx_wd *priv, int reg, uint16_t val)
 {
-	writew(val, priv->base + reg);
+	if (priv->bigendian)
+		out_be16(priv->base + reg, val);
+	else
+		writew(val, priv->base + reg);
 }
 
 static uint16_t imxwd_read(struct imx_wd *priv, int reg)
 {
-	return readw(priv->base + reg);
+	if (priv->bigendian)
+		return in_be16(priv->base + reg);
+	else
+		return readw(priv->base + reg);
 }
 
 static int imx1_watchdog_set_timeout(struct imx_wd *priv, unsigned timeout)
@@ -230,6 +237,7 @@ static int imx_wd_probe(struct device_d *dev)
 	priv->wd.timeout_max = priv->ops->timeout_max;
 	priv->wd.hwdev = dev;
 	priv->dev = dev;
+	priv->bigendian = of_device_is_big_endian(dev->device_node);
 
 	priv->ext_reset = of_property_read_bool(dev->device_node,
 						"fsl,ext-reset-output");
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-03-13  9:42 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-13  9:41 [PATCH 00/15] barebox Layerscape support Sascha Hauer
2019-03-13  9:41 ` [PATCH 01/15] mci: imx-esdhc: Actually enable cache snooping Sascha Hauer
2019-03-13  9:41 ` [PATCH 02/15] Add Freescale QUICC Engine firmware support Sascha Hauer
2019-03-13  9:41 ` [PATCH 03/15] net: Add Freescale FMan ethernet support Sascha Hauer
2019-03-13  9:41 ` [PATCH 04/15] ARM: Add arm64 pbl udelay Sascha Hauer
2019-03-19 18:12   ` Andrey Smirnov
2019-03-20  8:16     ` Sascha Hauer
2019-03-22  6:41       ` Andrey Smirnov
2019-03-13  9:41 ` [PATCH 05/15] esdhc-xload: Add support for Layerscape Sascha Hauer
2019-03-13  9:41 ` [PATCH 06/15] watchdog: imx: Add register accessor functions Sascha Hauer
2019-03-13  9:41 ` Sascha Hauer [this message]
2019-03-13  9:41 ` [PATCH 08/15] scripts: Add Layerscape image tool Sascha Hauer
2019-03-13  9:41 ` [PATCH 09/15] i2c: i.MX: Add layerscape support Sascha Hauer
2019-03-13  9:41 ` [PATCH 10/15] ddr: fsl: Add Freescale ddr driver Sascha Hauer
2019-03-13  9:41 ` [PATCH 11/15] ARM: Add basic Layerscape support Sascha Hauer
2019-03-13  9:41 ` [PATCH 12/15] clk: Add Layerscape clk support Sascha Hauer
2019-03-13  9:42 ` [PATCH 13/15] ARM: Layerscape: Add LS1046a RDB board support Sascha Hauer
2019-03-13  9:42 ` [PATCH 14/15] ARM: Layerscape: Add TQ TQMLS1046a " Sascha Hauer
2019-03-13  9:42 ` [PATCH 15/15] ARM: Add layerscape_defconfig Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190313094202.14901-8-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox