mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH v2 0/7] U-Boot environment data as a filesystem
Date: Mon,  3 Jun 2019 22:19:56 -0700	[thread overview]
Message-ID: <20190604052003.3189-1-andrew.smirnov@gmail.com> (raw)

Everyone:

This series adds code needed to expose U-Boot environemnt variable
data partition as a regular filesystem in Barebox. It currently only
supports the use-case where environment is stored on SD/MMC device,
since that is the only use-case I have access to for testing, however
adding support for other cases should be relatively
straightforward.

Feedback is welcome!

Changes since [v1]:

    - ubootvar changed to not rely on struct resource
    */mem_write/mem_read etc. and use a private pointer instead

    - ubootvar changed to handle the case of no valid environment data
      by allocation parition 0 as empty/new
      
    - Added documentation for ubootvarfs as well as ubootvar DT
      bindings

Thanks,
Andrey Smirnov

[v1] http://lists.infradead.org/pipermail/barebox/2019-May/038223.html

Andrey Smirnov (6):
  filetype: Add "U-Boot environmemnt variable data" filetype
  filetype: Allow specifying cdev's filetype explicitly
  drivers: Introduce late_platform_driver()
  misc: Add a driver to expose U-Boot environment variable data
  fs: Add a driver to access U-Boot environment variables
  ARM: rdu2: Add U-Boot environment partitions

Cory Tusar (1):
  ARM: rdu1: Add U-Boot environment partition

 .../barebox/barebox,uboot-environment.rst     |  43 ++
 Documentation/filesystems/ubootvarfs.rst      |  28 +
 arch/arm/dts/imx51-zii-rdu1.dts               |  21 +
 arch/arm/dts/imx6qdl-zii-rdu2.dtsi            |  27 +
 common/filetype.c                             |   8 +
 drivers/misc/Kconfig                          |  12 +
 drivers/misc/Makefile                         |   1 +
 drivers/misc/ubootvar.c                       | 360 +++++++++++++
 fs/Kconfig                                    |   8 +
 fs/Makefile                                   |   1 +
 fs/ubootvarfs.c                               | 499 ++++++++++++++++++
 include/driver.h                              |   4 +
 include/filetype.h                            |   1 +
 13 files changed, 1013 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/barebox/barebox,uboot-environment.rst
 create mode 100644 Documentation/filesystems/ubootvarfs.rst
 create mode 100644 drivers/misc/ubootvar.c
 create mode 100644 fs/ubootvarfs.c

-- 
2.21.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2019-06-04  5:20 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-04  5:19 Andrey Smirnov [this message]
2019-06-04  5:19 ` [PATCH v2 1/7] filetype: Add "U-Boot environmemnt variable data" filetype Andrey Smirnov
2019-06-04  5:19 ` [PATCH v2 2/7] filetype: Allow specifying cdev's filetype explicitly Andrey Smirnov
2019-06-04  5:19 ` [PATCH v2 3/7] drivers: Introduce late_platform_driver() Andrey Smirnov
2019-06-04  5:20 ` [PATCH v2 4/7] misc: Add a driver to expose U-Boot environment variable data Andrey Smirnov
2019-06-04  5:20 ` [PATCH v2 5/7] fs: Add a driver to access U-Boot environment variables Andrey Smirnov
2019-06-04  5:20 ` [PATCH v2 6/7] ARM: rdu2: Add U-Boot environment partitions Andrey Smirnov
2019-06-04  5:20 ` [PATCH v2 7/7] ARM: rdu1: Add U-Boot environment partition Andrey Smirnov
2019-06-07  7:05 ` [PATCH v2 0/7] U-Boot environment data as a filesystem Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190604052003.3189-1-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox