mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Ladislav Michl <ladis@linux-mips.org>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] net: macb: dma_sync_* receive buffers
Date: Tue, 4 Jun 2019 08:49:18 +0200	[thread overview]
Message-ID: <20190604064918.7w5llwzfeqm3tg46@pengutronix.de> (raw)
In-Reply-To: <20190530122815.GA6973@lenoch>

On Thu, May 30, 2019 at 02:28:15PM +0200, Ladislav Michl wrote:
> On Tue, Dec 04, 2018 at 08:58:01AM +0100, Sascha Hauer wrote:
> > Ladis,
> > 
> > On Fri, Nov 16, 2018 at 04:07:25PM +0100, Lucas Stach wrote:
> > > > @@ -237,12 +241,17 @@ static int macb_recv(struct eth_device *edev)
> > > > >  				taillen = length - headlen;
> > > > >  				memcpy((void *)NetRxPackets[0],
> > > > >  				       buffer, headlen);
> > > > > +				dma_sync_single_for_cpu((unsigned long)macb->rx_buffer,
> > > > > +							taillen, DMA_FROM_DEVICE);
> > > > >  				memcpy((void *)NetRxPackets[0] + headlen,
> > > >  				       macb->rx_buffer, taillen);
> > > 
> > > This is missing a dma_sync_single_for_device() here, matching the
> > > ...for_cpu added above. Otherwise patch looks good.
> > 
> > Any input to this one or an updated patch?
> 
> This must have slipped to the very bottom of my mailbox, sorry.
> 
> We should also not running sync outside buffer, if it is wrapped.
> Updated patch bellow.

Applied, thanks

Sascha

> 
> 	ladis
> 
> --- 8< ---
> 
> From: Ladislav Michl <ladis@linux-mips.org>
> Subject: [PATCH v2] net: macb: dma_sync_* receive buffers
> 
> Receive buffers are properly synchronized only if Cadence is
> GEM. Fix it for MACB as well.
> 
> Fixes: 86dc5259e25d (net: macb: no need for coherent memory for receive buffer)
> Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
> ---
>  drivers/net/macb.c | 27 ++++++++++++++++++++-------
>  1 file changed, 20 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 0c0d17ee9..a0411d6e4 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -209,9 +209,11 @@ static int macb_recv(struct eth_device *edev)
>  	dev_dbg(macb->dev, "%s\n", __func__);
>  
>  	for (;;) {
> +		barrier();
>  		if (!(macb->rx_ring[rx_tail].addr & MACB_BIT(RX_USED)))
>  			return -1;
>  
> +		barrier();
>  		status = macb->rx_ring[rx_tail].ctrl;
>  		if (status & MACB_BIT(RX_SOF)) {
>  			if (rx_tail != macb->rx_tail)
> @@ -228,14 +230,26 @@ static int macb_recv(struct eth_device *edev)
>  				headlen = macb->rx_buffer_size * (macb->rx_ring_size
>  						 - macb->rx_tail);
>  				taillen = length - headlen;
> -				memcpy((void *)NetRxPackets[0],
> -				       buffer, headlen);
> +				dma_sync_single_for_cpu((unsigned long)buffer,
> +							headlen, DMA_FROM_DEVICE);
> +				memcpy((void *)NetRxPackets[0], buffer, headlen);
> +				dma_sync_single_for_cpu((unsigned long)macb->rx_buffer,
> +							taillen, DMA_FROM_DEVICE);
>  				memcpy((void *)NetRxPackets[0] + headlen,
> -				       macb->rx_buffer, taillen);
> -				buffer = (void *)NetRxPackets[0];
> +					macb->rx_buffer, taillen);
> +				dma_sync_single_for_device((unsigned long)buffer,
> +							headlen, DMA_FROM_DEVICE);
> +				dma_sync_single_for_device((unsigned long)macb->rx_buffer,
> +							taillen, DMA_FROM_DEVICE);
> +				net_receive(edev, NetRxPackets[0], length);
> +			} else {
> +				dma_sync_single_for_cpu((unsigned long)buffer, length,
> +							DMA_FROM_DEVICE);
> +				net_receive(edev, buffer, length);
> +				dma_sync_single_for_device((unsigned long)buffer, length,
> +							DMA_FROM_DEVICE);
>  			}
> -
> -			net_receive(edev, buffer, length);
> +			barrier();
>  			if (++rx_tail >= macb->rx_ring_size)
>  				rx_tail = 0;
>  			reclaim_rx_buffers(macb, rx_tail);
> @@ -245,7 +259,6 @@ static int macb_recv(struct eth_device *edev)
>  				rx_tail = 0;
>  			}
>  		}
> -		barrier();
>  	}
>  
>  	return 0;
> -- 
> 2.20.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2019-06-04  6:49 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-15  0:36 Ladislav Michl
2018-11-16 15:07 ` Lucas Stach
2018-12-04  7:58   ` Sascha Hauer
2019-05-30 12:28     ` Ladislav Michl
2019-06-04  6:49       ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190604064918.7w5llwzfeqm3tg46@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=ladis@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox