[PATCH v2 0/6] ARM: stm32mp: implement watchdog/reset handling

From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 0/6] ARM: stm32mp: implement watchdog/reset handling
Date: Tue, 11 Jun 2019 11:43:13 +0200	[thread overview]
Message-ID: <20190611094319.9143-1-a.fatoum@pengutronix.de> (raw)

Changes since v1:
 * renamed BOR reset reason to BROWNOUT
 * replaced leading spaces with tabs
 * s/of_clk_get_by_name/clk_get/ in probe
 * moved RCC reset reason bit definitions into stm32_wdt.c
 * removed unnecessary indentation/alignment
 * had failures of reset reason & handler only print a warning
   but not fail the driver probe. All of these by Sascha
 * fixed an instance of stm32mp1 after the subarch was renamed
   to stm32mp, Spotted by Sam
 * Shortened the Kconfig label text for IWDG. Suggested by Roland
 * Dropped low level UART setup. It was incomplete and will be
   included in the first stage supprot patchset instead.

Cheers
Ahmad

Ahmad Fatoum (6):
  ARM: stm32mp1: rename to stm32mp
  reset_source: add new Brownout reset (BOR) source
  watchdog: add stm32 watchdog and reset driver
  ARM: stm32mp: enable watchdog in oftree and defconfig
  ARM: stm32mp: stm32mp157c-dk2: compress the DTB
  ARM: stm32mp: add entry point, not point.pblb to pblb-y

 arch/arm/Kconfig                              |   4 +-
 arch/arm/Makefile                             |   2 +-
 arch/arm/boards/stm32mp157c-dk2/lowlevel.c    |   4 +-
 .../{stm32mp1_defconfig => stm32mp_defconfig} |   7 +-
 arch/arm/dts/stm32mp157c-dk2.dts              |   4 +
 .../{mach-stm32mp1 => mach-stm32mp}/Kconfig   |   3 +-
 .../{mach-stm32mp1 => mach-stm32mp}/Makefile  |   0
 .../include/mach/debug_ll.h                   |   0
 .../include/mach/stm32.h                      |   0
 common/reset_source.c                         |   1 +
 drivers/watchdog/Kconfig                      |   8 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/stm32_wdt.c                  | 304 ++++++++++++++++++
 images/Makefile                               |   2 +-
 .../{Makefile.stm32mp1 => Makefile.stm32mp}   |   2 +-
 include/reset_source.h                        |   1 +
 16 files changed, 333 insertions(+), 10 deletions(-)
 rename arch/arm/configs/{stm32mp1_defconfig => stm32mp_defconfig} (95%)
 rename arch/arm/{mach-stm32mp1 => mach-stm32mp}/Kconfig (72%)
 rename arch/arm/{mach-stm32mp1 => mach-stm32mp}/Makefile (100%)
 rename arch/arm/{mach-stm32mp1 => mach-stm32mp}/include/mach/debug_ll.h (100%)
 rename arch/arm/{mach-stm32mp1 => mach-stm32mp}/include/mach/stm32.h (100%)
 create mode 100644 drivers/watchdog/stm32_wdt.c
 rename images/{Makefile.stm32mp1 => Makefile.stm32mp} (78%)

-- 
2.20.1

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox