From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hnNq6-0000CK-Q9 for barebox@lists.infradead.org; Tue, 16 Jul 2019 13:49:57 +0000 From: Sascha Hauer Date: Tue, 16 Jul 2019 15:49:45 +0200 Message-Id: <20190716134948.8609-2-s.hauer@pengutronix.de> In-Reply-To: <20190716134948.8609-1-s.hauer@pengutronix.de> References: <20190716134948.8609-1-s.hauer@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 2/5] ARM: nxp-imx8mq-evk: Do setup_c() before accessing global variables To: Barebox List The lowlevel board code accesses global variables, so call relocate_to_current_adr() / setup_c() to make sure we have a valid C environment. Signed-off-by: Sascha Hauer --- arch/arm/boards/nxp-imx8mq-evk/lowlevel.c | 54 +++++++++++++---------- 1 file changed, 31 insertions(+), 23 deletions(-) diff --git a/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c index 6451e5d414..e3fdc64edf 100644 --- a/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c +++ b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c @@ -67,30 +67,8 @@ static void nxp_imx8mq_evk_sram_setup(void) BUG_ON(ret); } -/* - * Power-on execution flow of start_nxp_imx8mq_evk() might not be - * obvious for a very first read, so here's, hopefully helpful, - * summary: - * - * 1. MaskROM uploads PBL into OCRAM and that's where this function is - * executed for the first time - * - * 2. DDR is initialized and full i.MX image is loaded to the - * beginning of RAM - * - * 3. start_nxp_imx8mq_evk, now in RAM, is executed again - * - * 4. BL31 blob is uploaded to OCRAM and the control is transfer to it - * - * 5. BL31 exits EL3 into EL2 at address MX8MQ_ATF_BL33_BASE_ADDR, - * executing start_nxp_imx8mq_evk() the third time - * - * 6. Standard barebox boot flow continues - */ -ENTRY_FUNCTION(start_nxp_imx8mq_evk, r0, r1, r2) +static __noreturn noinline void nxp_imx8mq_evk_start(void) { - imx8mq_cpu_lowlevel_init(); - if (IS_ENABLED(CONFIG_DEBUG_LL)) setup_uart(); @@ -125,3 +103,33 @@ ENTRY_FUNCTION(start_nxp_imx8mq_evk, r0, r1, r2) imx8mq_barebox_entry(__dtb_imx8mq_evk_start); } +/* + * Power-on execution flow of start_nxp_imx8mq_evk() might not be + * obvious for a very first read, so here's, hopefully helpful, + * summary: + * + * 1. MaskROM uploads PBL into OCRAM and that's where this function is + * executed for the first time + * + * 2. DDR is initialized and full i.MX image is loaded to the + * beginning of RAM + * + * 3. start_nxp_imx8mq_evk, now in RAM, is executed again + * + * 4. BL31 blob is uploaded to OCRAM and the control is transfer to it + * + * 5. BL31 exits EL3 into EL2 at address MX8MQ_ATF_BL33_BASE_ADDR, + * executing start_nxp_imx8mq_evk() the third time + * + * 6. Standard barebox boot flow continues + */ +ENTRY_FUNCTION(start_nxp_imx8mq_evk, r0, r1, r2) +{ + imx8mq_cpu_lowlevel_init(); + + relocate_to_current_adr(); + setup_c(); + + nxp_imx8mq_evk_start(); +} + -- 2.20.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox