[PATCH] fixup! Documentation: boards: add initial STM32MP documentation

[PATCH] fixup! Documentation: boards: add initial STM32MP documentation

[Ahmad Fatoum]

Left-over line spotted by Roland. The boards are listed in the section
following this.
---
 Documentation/boards/stm32mp.rst | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst
index 8cbf36c3961e..24cf8859db8d 100644
--- a/Documentation/boards/stm32mp.rst
+++ b/Documentation/boards/stm32mp.rst
@@ -22,8 +22,6 @@ header-less image ending in ``*.pblb`` as well.
 
 Use of barebox as FSBL is not supported.
 
-Following boards are currently supported in barebox:
-
 Building barebox
 ----------------
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH] fixup! Documentation: boards: add initial STM32MP documentation

[Sascha Hauer]

On Sat, Aug 03, 2019 at 07:33:58PM +0200, Ahmad Fatoum wrote:
> Left-over line spotted by Roland. The boards are listed in the section
> following this.
> ---
>  Documentation/boards/stm32mp.rst | 2 --
>  1 file changed, 2 deletions(-)

Applied, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 5/5] Documentation: boards: add initial STM32MP documentation

[Ahmad Fatoum]

Support for the SoC is still in progress, but lets document
what we have now.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 Documentation/boards/stm32mp.rst | 73 ++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/boards/stm32mp.rst

diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst
new file mode 100644
index 000000000000..7f787bac203e
--- /dev/null
+++ b/Documentation/boards/stm32mp.rst
@@ -0,0 +1,73 @@
+STMicroelectronics STM32MP
+==========================
+
+.. note::
+
+  Support for the STM32MP architecure in barebox is still in progress.
+  Bootstrapping an OS from mainline barebox is not yet supported.
+
+The STM32MP is a line of 32-bit ARM SoCs. They reuse peripherals of the
+STM32 line of microcontrollers and can have a STM32 MCU embedded as co-processor
+as well.
+
+The boot process of the STM32MP SoC is a two step process.
+The first stage boot loader (FSBL) is loaded by the ROM code into the built-in
+SYSRAM and executed. The FSBL sets up the SDRAM, install a secure monitor and
+then the second stage boot loader (SSBL) is loaded into DRAM.
+
+When building barebox, the resulting ``barebox-${board}.img`` file has the STM32
+header preprended, so it can be loaded directly as FSBL by the ARM TF-A
+(https://github.com/ARM-software/arm-trusted-firmware). Each entry point has a
+header-less image ending in ``*.pblb`` as well.
+
+Use of barebox as FSBL is not supported.
+
+Following boards are currently supported in barebox:
+
+Building barebox
+----------------
+
+With multi-image and device trees, it's expected to have ``stm32mp_defconfig``
+as sole defconfig for all STM32MP boards::
+
+  make ARCH=arm stm32mp_defconfig
+
+The resulting images will be placed under ``images/``:
+
+::
+
+  barebox-stm32mp157c-dk2.img
+
+
+Flashing barebox
+----------------
+
+An appropriate image for the boot media can be generated with following
+``genimage(1)`` config::
+
+  image @STM32MP_BOARD@.img {
+      hdimage {
+          align = 1M
+          gpt = "true"
+      }
+      partition fsbl1 {
+          image = "tf-a-@STM32MP_BOARD@.stm32"
+          size = 256K
+      }
+      partition fsbl2 {
+          image = "tf-a-@STM32MP_BOARD@.stm32"
+          size = 256K
+      }
+      partition ssbl {
+          image = "barebox-@STM32MP_BOARD@.img"
+          size = 1M
+      }
+  }
+
+Image can then be flashed on e.g. a SD-Card.
+
+TODO
+----
+
+* Extend barebox MMCI support to support the SDMMC2
+* Extend barebox DesignWare MAC support to support the stmmac
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH] fixup! Documentation: boards: add initial STM32MP documentation

[Ahmad Fatoum]

Fix typo: TF-A is FSBL, barebox is SSBL
---
 Documentation/boards/stm32mp.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst
index 7f787bac203e..8cbf36c3961e 100644
--- a/Documentation/boards/stm32mp.rst
+++ b/Documentation/boards/stm32mp.rst
@@ -16,7 +16,7 @@ SYSRAM and executed. The FSBL sets up the SDRAM, install a secure monitor and
 then the second stage boot loader (SSBL) is loaded into DRAM.
 
 When building barebox, the resulting ``barebox-${board}.img`` file has the STM32
-header preprended, so it can be loaded directly as FSBL by the ARM TF-A
+header preprended, so it can be loaded directly as SSBL by the ARM TF-A
 (https://github.com/ARM-software/arm-trusted-firmware). Each entry point has a
 header-less image ending in ``*.pblb`` as well.
 
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox