mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v2 2/8] pinctrl: demote dev_info on successful probes to dev_dbg
Date: Mon, 28 Oct 2019 00:18:26 +0100	[thread overview]
Message-ID: <20191027231832.10247-2-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20191027231832.10247-1-a.fatoum@pengutronix.de>

The SoC's pin controller is virtually always built and probed, so
there's is little information to gain from the fact it was successfully
probed. Have the success message show up as debug message to reduce probe
clutter like this:

	NOTICE: stm32-pinctrl soc:pin-controller@50002000.of: pinctrl/gpio driver registered
	NOTICE: stm32-pinctrl soc:pin-controller-z@54004000.of: pinctrl/gpio driver registered

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/pinctrl/pinctrl-at91-pio4.c | 4 ++--
 drivers/pinctrl/pinctrl-bcm2835.c   | 2 +-
 drivers/pinctrl/pinctrl-stm32.c     | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index 9bc259f84cca..b527114f1ba0 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -260,7 +260,7 @@ static int pinctrl_at91_pio4_gpiochip_add(struct device_d *dev,
 		return ret;
 	}
 
-	dev_info(dev, "gpio driver registered\n");
+	dev_dbg(dev, "gpio driver registered\n");
 
 	return 0;
 }
@@ -290,7 +290,7 @@ static int pinctrl_at91_pio4_probe(struct device_d *dev)
 	if (ret)
 		return ret;
 
-	dev_info(dev, "pinctrl driver registered\n");
+	dev_dbg(dev, "pinctrl driver registered\n");
 
 	if (of_get_property(np, "gpio-controller", NULL))
 		return pinctrl_at91_pio4_gpiochip_add(dev, pinctrl);
diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c
index 5fd5740e8184..b8e9b60372e3 100644
--- a/drivers/pinctrl/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/pinctrl-bcm2835.c
@@ -171,7 +171,7 @@ static int bcm2835_gpio_probe(struct device_d *dev)
 		goto err;
 	}
 
-	dev_info(dev, "probed gpiochip%d with base %d\n", dev->id, bcmgpio->chip.base);
+	dev_dbg(dev, "probed gpiochip%d with base %d\n", dev->id, bcmgpio->chip.base);
 
 	if (IS_ENABLED(CONFIG_PINCTRL)) {
 		ret = pinctrl_register(&bcmgpio->pctl);
diff --git a/drivers/pinctrl/pinctrl-stm32.c b/drivers/pinctrl/pinctrl-stm32.c
index ab121998a37f..c199d74846e8 100644
--- a/drivers/pinctrl/pinctrl-stm32.c
+++ b/drivers/pinctrl/pinctrl-stm32.c
@@ -401,7 +401,7 @@ static int stm32_pinctrl_probe(struct device_d *dev)
 		}
 	}
 
-	dev_info(dev, "pinctrl/gpio driver registered\n");
+	dev_dbg(dev, "pinctrl/gpio driver registered\n");
 
 	return 0;
 }
-- 
2.23.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2019-10-27 23:18 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-27 23:18 [PATCH v2 1/8] pinctrl: stm32: fix debug print of uninitialized variable Ahmad Fatoum
2019-10-27 23:18 ` Ahmad Fatoum [this message]
2019-10-27 23:18 ` [PATCH v2 3/8] pinctrl: stm32: parse pinctrl nodes without subnodes as well Ahmad Fatoum
2019-10-27 23:18 ` [PATCH v2 4/8] ARM: sm: document SMC/PSCI related options Ahmad Fatoum
2019-10-27 23:18 ` [PATCH v2 5/8] ARM: stm32mp: select ARM_SMCCC always Ahmad Fatoum
2019-10-27 23:18 ` [PATCH v2 6/8] nvmem: add read support for STM32MP1 bsec OTP Ahmad Fatoum
2019-10-27 23:18 ` [PATCH v2 7/8] ARM: stm32mp: dk2: add barebox SD-Card update handler Ahmad Fatoum
2019-10-28 11:31   ` Sascha Hauer
2019-10-28 17:32     ` Ahmad Fatoum
2019-10-27 23:18 ` [PATCH v2 8/8] ARM: stm32mp: implement SoC and boot source identification Ahmad Fatoum
2019-10-28 11:32 ` [PATCH v2 1/8] pinctrl: stm32: fix debug print of uninitialized variable Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191027231832.10247-2-a.fatoum@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox