* [PATCH 04/10] regulator: port Linux of_regulator_match
2019-11-06 7:11 [PATCH 01/10] commands: regulator: move implementation to regulator core Ahmad Fatoum
2019-11-06 7:11 ` [PATCH 02/10] commands: regulator: add support for enabling/disabling regulators Ahmad Fatoum
2019-11-06 7:11 ` [PATCH 03/10] regulator: copy upstream struct regulator_desc documentation Ahmad Fatoum
@ 2019-11-06 7:11 ` Ahmad Fatoum
2019-11-06 7:11 ` [PATCH 05/10] regulator: import linear voltage range helpers Ahmad Fatoum
` (6 subsequent siblings)
9 siblings, 0 replies; 14+ messages in thread
From: Ahmad Fatoum @ 2019-11-06 7:11 UTC (permalink / raw)
To: barebox; +Cc: Ahmad Fatoum, mgr
Linux regulator drivers like the pfuze and the incoming stpmic make use
of of_regulator_match to parse regulator init data from the device tree.
Port the function over from Linux v5.3, so drivers depending on it can
follow.
As we have no use in barebox for power saving and suspend states, these
parts are omitted.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/regulator/Makefile | 1 +
drivers/regulator/of_regulator.c | 229 +++++++++++++++++++++++++
include/linux/regulator/machine.h | 207 ++++++++++++++++++++++
include/linux/regulator/of_regulator.h | 48 ++++++
4 files changed, 485 insertions(+)
create mode 100644 drivers/regulator/of_regulator.c
create mode 100644 include/linux/regulator/machine.h
create mode 100644 include/linux/regulator/of_regulator.h
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b2fc5b79b632..f51e89cd3cc3 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_REGULATOR) += core.o helpers.o
+obj-$(CONFIG_OFDEVICE) += of_regulator.o
obj-$(CONFIG_REGULATOR_FIXED) += fixed.o
obj-$(CONFIG_REGULATOR_BCM283X) += bcm2835.o
obj-$(CONFIG_REGULATOR_PFUZE) += pfuze.o
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
new file mode 100644
index 000000000000..3e8caa87104e
--- /dev/null
+++ b/drivers/regulator/of_regulator.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OF helpers for regulator framework
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ */
+
+#include <common.h>
+#include <of.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
+
+static int of_get_regulation_constraints(struct device_d *dev,
+ struct device_node *np,
+ struct regulator_init_data **init_data,
+ const struct regulator_desc *desc)
+{
+ struct regulation_constraints *constraints = &(*init_data)->constraints;
+ int ret;
+ u32 pval;
+
+ constraints->name = of_get_property(np, "regulator-name", NULL);
+
+ if (!of_property_read_u32(np, "regulator-min-microvolt", &pval))
+ constraints->min_uV = pval;
+
+ if (!of_property_read_u32(np, "regulator-max-microvolt", &pval))
+ constraints->max_uV = pval;
+
+ /* Voltage change possible? */
+ if (constraints->min_uV != constraints->max_uV)
+ constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
+
+ /* Do we have a voltage range, if so try to apply it? */
+ if (constraints->min_uV && constraints->max_uV)
+ constraints->apply_uV = true;
+
+ if (!of_property_read_u32(np, "regulator-microvolt-offset", &pval))
+ constraints->uV_offset = pval;
+ if (!of_property_read_u32(np, "regulator-min-microamp", &pval))
+ constraints->min_uA = pval;
+ if (!of_property_read_u32(np, "regulator-max-microamp", &pval))
+ constraints->max_uA = pval;
+
+ if (!of_property_read_u32(np, "regulator-input-current-limit-microamp",
+ &pval))
+ constraints->ilim_uA = pval;
+
+ /* Current change possible? */
+ if (constraints->min_uA != constraints->max_uA)
+ constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT;
+
+ constraints->boot_on = of_property_read_bool(np, "regulator-boot-on");
+ constraints->always_on = of_property_read_bool(np, "regulator-always-on");
+ if (!constraints->always_on) /* status change should be possible. */
+ constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;
+
+ constraints->pull_down = of_property_read_bool(np, "regulator-pull-down");
+
+ if (of_property_read_bool(np, "regulator-allow-bypass"))
+ constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
+
+ if (of_property_read_bool(np, "regulator-allow-set-load"))
+ constraints->valid_ops_mask |= REGULATOR_CHANGE_DRMS;
+
+ ret = of_property_read_u32(np, "regulator-ramp-delay", &pval);
+ if (!ret) {
+ if (pval)
+ constraints->ramp_delay = pval;
+ else
+ constraints->ramp_disable = true;
+ }
+
+ ret = of_property_read_u32(np, "regulator-settling-time-us", &pval);
+ if (!ret)
+ constraints->settling_time = pval;
+
+ ret = of_property_read_u32(np, "regulator-settling-time-up-us", &pval);
+ if (!ret)
+ constraints->settling_time_up = pval;
+ if (constraints->settling_time_up && constraints->settling_time) {
+ pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-up-us'\n",
+ np);
+ constraints->settling_time_up = 0;
+ }
+
+ ret = of_property_read_u32(np, "regulator-settling-time-down-us",
+ &pval);
+ if (!ret)
+ constraints->settling_time_down = pval;
+ if (constraints->settling_time_down && constraints->settling_time) {
+ pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-down-us'\n",
+ np);
+ constraints->settling_time_down = 0;
+ }
+
+ ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
+ if (!ret)
+ constraints->enable_time = pval;
+
+ constraints->soft_start = of_property_read_bool(np,
+ "regulator-soft-start");
+ ret = of_property_read_u32(np, "regulator-active-discharge", &pval);
+ if (!ret) {
+ constraints->active_discharge =
+ (pval) ? REGULATOR_ACTIVE_DISCHARGE_ENABLE :
+ REGULATOR_ACTIVE_DISCHARGE_DISABLE;
+ }
+
+ if (!of_property_read_u32(np, "regulator-system-load", &pval))
+ constraints->system_load = pval;
+
+ if (!of_property_read_u32(np, "regulator-max-step-microvolt",
+ &pval))
+ constraints->max_uV_step = pval;
+
+ constraints->over_current_protection = of_property_read_bool(np,
+ "regulator-over-current-protection");
+
+ return 0;
+}
+
+/**
+ * of_get_regulator_init_data - extract regulator_init_data structure info
+ * @dev: device requesting for regulator_init_data
+ * @node: regulator device node
+ * @desc: regulator description
+ *
+ * Populates regulator_init_data structure by extracting data from device
+ * tree node, returns a pointer to the populated structure or NULL if memory
+ * alloc fails.
+ */
+struct regulator_init_data *of_get_regulator_init_data(struct device_d *dev,
+ struct device_node *node,
+ const struct regulator_desc *desc)
+{
+ struct regulator_init_data *init_data;
+
+ if (!node)
+ return NULL;
+
+ init_data = xzalloc(sizeof(*init_data));
+
+ if (of_get_regulation_constraints(dev, node, &init_data, desc))
+ return NULL;
+
+ return init_data;
+}
+EXPORT_SYMBOL_GPL(of_get_regulator_init_data);
+
+struct devm_of_regulator_matches {
+ struct of_regulator_match *matches;
+ unsigned int num_matches;
+};
+
+/**
+ * of_regulator_match - extract multiple regulator init data from device tree.
+ * @dev: device requesting the data
+ * @node: parent device node of the regulators
+ * @matches: match table for the regulators
+ * @num_matches: number of entries in match table
+ *
+ * This function uses a match table specified by the regulator driver to
+ * parse regulator init data from the device tree. @node is expected to
+ * contain a set of child nodes, each providing the init data for one
+ * regulator. The data parsed from a child node will be matched to a regulator
+ * based on either the deprecated property regulator-compatible if present,
+ * or otherwise the child node's name. Note that the match table is modified
+ * in place and an additional of_node reference is taken for each matched
+ * regulator.
+ *
+ * Returns the number of matches found or a negative error code on failure.
+ */
+int of_regulator_match(struct device_d *dev, struct device_node *node,
+ struct of_regulator_match *matches,
+ unsigned int num_matches)
+{
+ unsigned int count = 0;
+ unsigned int i;
+ const char *name;
+ struct device_node *child;
+ struct devm_of_regulator_matches *devm_matches;
+
+ if (!dev || !node)
+ return -EINVAL;
+
+ devm_matches = xzalloc(sizeof(struct devm_of_regulator_matches));
+
+ devm_matches->matches = matches;
+ devm_matches->num_matches = num_matches;
+
+ for (i = 0; i < num_matches; i++) {
+ struct of_regulator_match *match = &matches[i];
+ match->init_data = NULL;
+ match->of_node = NULL;
+ }
+
+ for_each_child_of_node(node, child) {
+ name = of_get_property(child,
+ "regulator-compatible", NULL);
+ if (!name)
+ name = child->name;
+
+ for (i = 0; i < num_matches; i++) {
+ struct of_regulator_match *match = &matches[i];
+ if (match->of_node)
+ continue;
+
+ if (strcmp(match->name, name))
+ continue;
+
+ match->init_data = of_get_regulator_init_data(dev, child,
+ match->desc);
+ if (!match->init_data) {
+ dev_err(dev,
+ "failed to parse DT for regulator %pOFn\n",
+ child);
+ return -EINVAL;
+ }
+ match->of_node = child;
+ count++;
+ break;
+ }
+ }
+
+ return count;
+}
+EXPORT_SYMBOL_GPL(of_regulator_match);
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
new file mode 100644
index 000000000000..bb8bc7c4e0b6
--- /dev/null
+++ b/include/linux/regulator/machine.h
@@ -0,0 +1,207 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * machine.h -- SoC Regulator support, machine/board driver API.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * Regulator Machine/Board Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_MACHINE_H_
+#define __LINUX_REGULATOR_MACHINE_H_
+
+#include <regulator.h>
+
+struct regulator;
+
+/*
+ * Regulator operation constraint flags. These flags are used to enable
+ * certain regulator operations and can be OR'ed together.
+ *
+ * VOLTAGE: Regulator output voltage can be changed by software on this
+ * board/machine.
+ * CURRENT: Regulator output current can be changed by software on this
+ * board/machine.
+ * MODE: Regulator operating mode can be changed by software on this
+ * board/machine.
+ * STATUS: Regulator can be enabled and disabled.
+ * DRMS: Dynamic Regulator Mode Switching is enabled for this regulator.
+ * BYPASS: Regulator can be put into bypass mode
+ */
+
+#define REGULATOR_CHANGE_VOLTAGE 0x1
+#define REGULATOR_CHANGE_CURRENT 0x2
+#define REGULATOR_CHANGE_MODE 0x4
+#define REGULATOR_CHANGE_STATUS 0x8
+#define REGULATOR_CHANGE_DRMS 0x10
+#define REGULATOR_CHANGE_BYPASS 0x20
+
+/* Regulator active discharge flags */
+enum regulator_active_discharge {
+ REGULATOR_ACTIVE_DISCHARGE_DEFAULT,
+ REGULATOR_ACTIVE_DISCHARGE_DISABLE,
+ REGULATOR_ACTIVE_DISCHARGE_ENABLE,
+};
+
+/**
+ * struct regulation_constraints - regulator operating constraints.
+ *
+ * This struct describes regulator and board/machine specific constraints.
+ *
+ * @name: Descriptive name for the constraints, used for display purposes.
+ *
+ * @min_uV: Smallest voltage consumers may set.
+ * @max_uV: Largest voltage consumers may set.
+ * @uV_offset: Offset applied to voltages from consumer to compensate for
+ * voltage drops.
+ *
+ * @min_uA: Smallest current consumers may set.
+ * @max_uA: Largest current consumers may set.
+ * @ilim_uA: Maximum input current.
+ * @system_load: Load that isn't captured by any consumer requests.
+ *
+ * @max_spread: Max possible spread between coupled regulators
+ * @valid_modes_mask: Mask of modes which may be configured by consumers.
+ * @valid_ops_mask: Operations which may be performed by consumers.
+ *
+ * @always_on: Set if the regulator should never be disabled.
+ * @boot_on: Set if the regulator is enabled when the system is initially
+ * started. If the regulator is not enabled by the hardware or
+ * bootloader then it will be enabled when the constraints are
+ * applied.
+ * @apply_uV: Apply the voltage constraint when initialising.
+ * @ramp_disable: Disable ramp delay when initialising or when setting voltage.
+ * @soft_start: Enable soft start so that voltage ramps slowly.
+ * @pull_down: Enable pull down when regulator is disabled.
+ * @over_current_protection: Auto disable on over current event.
+ *
+ * @input_uV: Input voltage for regulator when supplied by another regulator.
+ *
+ * @initial_mode: Mode to set at startup.
+ * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @settling_time: Time to settle down after voltage change when voltage
+ * change is non-linear (unit: microseconds).
+ * @settling_time_up: Time to settle down after voltage increase when voltage
+ * change is non-linear (unit: microseconds).
+ * @settling_time_down : Time to settle down after voltage decrease when
+ * voltage change is non-linear (unit: microseconds).
+ * @active_discharge: Enable/disable active discharge. The enum
+ * regulator_active_discharge values are used for
+ * initialisation.
+ * @enable_time: Turn-on time of the rails (unit: microseconds)
+ */
+struct regulation_constraints {
+
+ const char *name;
+
+ /* voltage output range (inclusive) - for voltage control */
+ int min_uV;
+ int max_uV;
+
+ int uV_offset;
+
+ /* current output range (inclusive) - for current control */
+ int min_uA;
+ int max_uA;
+ int ilim_uA;
+
+ int system_load;
+
+ /* used for coupled regulators */
+ u32 *max_spread;
+
+ /* used for changing voltage in steps */
+ int max_uV_step;
+
+ /* valid regulator operating modes for this machine */
+ unsigned int valid_modes_mask;
+
+ /* valid operations for regulator on this machine */
+ unsigned int valid_ops_mask;
+
+ /* regulator input voltage - only if supply is another regulator */
+ int input_uV;
+
+ /* mode to set on startup */
+ unsigned int initial_mode;
+
+ unsigned int ramp_delay;
+ unsigned int settling_time;
+ unsigned int settling_time_up;
+ unsigned int settling_time_down;
+ unsigned int enable_time;
+
+ unsigned int active_discharge;
+
+ /* constraint flags */
+ unsigned always_on:1; /* regulator never off when system is on */
+ unsigned boot_on:1; /* bootloader/firmware enabled regulator */
+ unsigned apply_uV:1; /* apply uV constraint if min == max */
+ unsigned ramp_disable:1; /* disable ramp delay */
+ unsigned soft_start:1; /* ramp voltage slowly */
+ unsigned pull_down:1; /* pull down resistor when regulator off */
+ unsigned over_current_protection:1; /* auto disable on over current */
+};
+
+/**
+ * struct regulator_consumer_supply - supply -> device mapping
+ *
+ * This maps a supply name to a device. Use of dev_name allows support for
+ * buses which make struct device available late such as I2C.
+ *
+ * @dev_name: Result of dev_name() for the consumer.
+ * @supply: Name for the supply.
+ */
+struct regulator_consumer_supply {
+ const char *dev_name; /* dev_name() for consumer */
+ const char *supply; /* consumer supply - e.g. "vcc" */
+};
+
+/* Initialize struct regulator_consumer_supply */
+#define REGULATOR_SUPPLY(_name, _dev_name) \
+{ \
+ .supply = _name, \
+ .dev_name = _dev_name, \
+}
+
+/**
+ * struct regulator_init_data - regulator platform initialisation data.
+ *
+ * Initialisation constraints, our supply and consumers supplies.
+ *
+ * @supply_regulator: Parent regulator. Specified using the regulator name
+ * as it appears in the name field in sysfs, which can
+ * be explicitly set using the constraints field 'name'.
+ *
+ * @constraints: Constraints. These must be specified for the regulator to
+ * be usable.
+ * @num_consumer_supplies: Number of consumer device supplies.
+ * @consumer_supplies: Consumer device supply configuration.
+ *
+ * @regulator_init: Callback invoked when the regulator has been registered.
+ * @driver_data: Data passed to regulator_init.
+ */
+struct regulator_init_data {
+ const char *supply_regulator; /* or NULL for system supply */
+
+ struct regulation_constraints constraints;
+
+ int num_consumer_supplies;
+ struct regulator_consumer_supply *consumer_supplies;
+
+ /* optional regulator machine specific init */
+ int (*regulator_init)(void *driver_data);
+ void *driver_data; /* core does not touch this */
+};
+
+#ifdef CONFIG_REGULATOR
+void regulator_has_full_constraints(void);
+#else
+static inline void regulator_has_full_constraints(void)
+{
+}
+#endif
+
+#endif
diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h
new file mode 100644
index 000000000000..265b98d1eef3
--- /dev/null
+++ b/include/linux/regulator/of_regulator.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * OpenFirmware regulator support routines
+ */
+
+#ifndef __LINUX_OF_REG_H
+#define __LINUX_OF_REG_H
+
+#include <linux/types.h>
+
+struct device_d;
+struct regulator_desc;
+
+struct of_regulator_match {
+ const char *name;
+ void *driver_data;
+ struct regulator_init_data *init_data;
+ struct device_node *of_node;
+ const struct regulator_desc *desc;
+};
+
+#if defined(CONFIG_OFDEVICE)
+extern struct regulator_init_data
+ *of_get_regulator_init_data(struct device_d *dev,
+ struct device_node *node,
+ const struct regulator_desc *desc);
+extern int of_regulator_match(struct device_d *dev, struct device_node *node,
+ struct of_regulator_match *matches,
+ unsigned int num_matches);
+#else
+static inline struct regulator_init_data
+ *of_get_regulator_init_data(struct device_d *dev,
+ struct device_node *node,
+ const struct regulator_desc *desc)
+{
+ return NULL;
+}
+
+static inline int of_regulator_match(struct device_d *dev,
+ struct device_node *node,
+ struct of_regulator_match *matches,
+ unsigned int num_matches)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+#endif /* __LINUX_OF_REG_H */
--
2.24.0.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH 07/10] regulator: add driver for stpmic1-regulators
2019-11-06 7:11 [PATCH 01/10] commands: regulator: move implementation to regulator core Ahmad Fatoum
` (4 preceding siblings ...)
2019-11-06 7:11 ` [PATCH 06/10] mfd: stpmic1: use dev_get_regmap instead of priv member Ahmad Fatoum
@ 2019-11-06 7:11 ` Ahmad Fatoum
2019-11-06 7:29 ` [PATCH 11/10] fixup! " Ahmad Fatoum
2019-11-06 7:11 ` [PATCH 08/10] ARM: dts: stm32mp157a-dk1: remove unnecessary sram node Ahmad Fatoum
` (3 subsequent siblings)
9 siblings, 1 reply; 14+ messages in thread
From: Ahmad Fatoum @ 2019-11-06 7:11 UTC (permalink / raw)
To: barebox; +Cc: Ahmad Fatoum, mgr
This commit imports the Linux v5.3 state of the driver. This allows us
to regulate at least the v3v3 voltage rail used by the DK1 and DK2
Ethernet PHY and SD-Card. Eventually, this driver should be used by the
USB host driver to supply the vbus voltage as well.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 3 +-
drivers/regulator/stpmic1_regulator.c | 452 ++++++++++++++++++++++++++
include/linux/mfd/stpmic1.h | 212 ++++++++++++
4 files changed, 675 insertions(+), 1 deletion(-)
create mode 100644 drivers/regulator/stpmic1_regulator.c
create mode 100644 include/linux/mfd/stpmic1.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c734ef5ef9c7..28bd69a2a534 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -21,6 +21,15 @@ config REGULATOR_PFUZE
depends on I2C
depends on ARCH_IMX6
+config REGULATOR_STPMIC1
+ tristate "STMicroelectronics STPMIC1 PMIC Regulators"
+ depends on MFD_STPMIC1
+ help
+ This driver supports STMicroelectronics STPMIC1 PMIC voltage
+ regulators and switches. The STPMIC1 regulators supply power to
+ an application processor as well as to external system
+ peripherals such as DDR, Flash memories and system devices.
+
config REGULATOR_ANATOP
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
depends on MFD_SYSCON
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index f51e89cd3cc3..e27e155cf624 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_OFDEVICE) += of_regulator.o
obj-$(CONFIG_REGULATOR_FIXED) += fixed.o
obj-$(CONFIG_REGULATOR_BCM283X) += bcm2835.o
obj-$(CONFIG_REGULATOR_PFUZE) += pfuze.o
-obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
\ No newline at end of file
+obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
+obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c
new file mode 100644
index 000000000000..72a5730931e6
--- /dev/null
+++ b/drivers/regulator/stpmic1_regulator.c
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+
+#include <common.h>
+#include <init.h>
+#include <asm/io.h>
+#include <of_device.h>
+#include <mfd/syscon.h>
+#include <regmap.h>
+#include <linux/regulator/of_regulator.h>
+#include <regulator.h>
+#include <linux/mfd/stpmic1.h>
+#include <mfd/syscon.h>
+
+#include <common.h>
+#include <init.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <of_device.h>
+#include <linux/iopoll.h>
+#include <poweroff.h>
+#include <mfd/syscon.h>
+#include <restart.h>
+#include <reset_source.h>
+
+
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/**
+ * stpmic1 regulator description: this structure is used as driver data
+ * @desc: regulator framework description
+ * @mask_reset_reg: mask reset register address
+ * @mask_reset_mask: mask rank and mask reset register mask
+ * @icc_reg: icc register address
+ * @icc_mask: icc register mask
+ */
+struct stpmic1_regulator_cfg {
+ struct device_d *dev;
+ struct regulator_dev rdev;
+ struct regulator_desc desc;
+ u8 mask_reset_reg;
+ u8 mask_reset_mask;
+ u8 icc_reg;
+ u8 icc_mask;
+};
+
+enum {
+ STPMIC1_BUCK1 = 0,
+ STPMIC1_BUCK2 = 1,
+ STPMIC1_BUCK3 = 2,
+ STPMIC1_BUCK4 = 3,
+ STPMIC1_LDO1 = 4,
+ STPMIC1_LDO2 = 5,
+ STPMIC1_LDO3 = 6,
+ STPMIC1_LDO4 = 7,
+ STPMIC1_LDO5 = 8,
+ STPMIC1_LDO6 = 9,
+ STPMIC1_VREF_DDR = 10,
+ STPMIC1_BOOST = 11,
+ STPMIC1_VBUS_OTG = 12,
+ STPMIC1_SW_OUT = 13,
+};
+
+/* Enable time worst case is 5000mV/(2250uV/uS) */
+#define PMIC_ENABLE_TIME_US 2200
+
+static const struct regulator_linear_range buck1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(725000, 0, 4, 0),
+ REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000),
+ REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0),
+};
+
+static const struct regulator_linear_range buck2_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0),
+ REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0),
+ REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0),
+ REGULATOR_LINEAR_RANGE(1150000, 22, 23, 0),
+ REGULATOR_LINEAR_RANGE(1200000, 24, 25, 0),
+ REGULATOR_LINEAR_RANGE(1250000, 26, 27, 0),
+ REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
+ REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
+ REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0),
+ REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
+ REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0),
+};
+
+static const struct regulator_linear_range buck3_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0),
+ REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0),
+ REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0),
+ REGULATOR_LINEAR_RANGE(1300000, 28, 31, 0),
+ REGULATOR_LINEAR_RANGE(1400000, 32, 35, 0),
+ REGULATOR_LINEAR_RANGE(1500000, 36, 55, 100000),
+ REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0),
+};
+
+static const struct regulator_linear_range buck4_ranges[] = {
+ REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000),
+ REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
+ REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
+ REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0),
+ REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
+ REGULATOR_LINEAR_RANGE(1500000, 36, 60, 100000),
+ REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0),
+};
+
+static const struct regulator_linear_range ldo1_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
+ REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
+ REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
+};
+
+static const struct regulator_linear_range ldo2_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
+ REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
+ REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
+};
+
+static const struct regulator_linear_range ldo3_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
+ REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
+ REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
+ /* with index 31 LDO3 is in DDR mode */
+ REGULATOR_LINEAR_RANGE(500000, 31, 31, 0),
+};
+
+static const struct regulator_linear_range ldo5_ranges[] = {
+ REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
+ REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000),
+ REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0),
+};
+
+static const struct regulator_linear_range ldo6_ranges[] = {
+ REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000),
+ REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
+};
+
+static const struct regulator_ops stpmic1_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops stpmic1_ldo3_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_iterate,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops stpmic1_ldo4_fixed_regul_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+};
+
+static const struct regulator_ops stpmic1_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops stpmic1_vref_ddr_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+};
+
+static const struct regulator_ops stpmic1_boost_regul_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+};
+
+static const struct regulator_ops stpmic1_switch_regul_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+};
+
+#define REG_LDO(ids, base) { \
+ .n_voltages = 32, \
+ .ops = &stpmic1_ldo_ops, \
+ .linear_ranges = base ## _ranges, \
+ .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \
+ .vsel_reg = ids##_ACTIVE_CR, \
+ .vsel_mask = LDO_VOLTAGE_MASK, \
+ .enable_reg = ids##_ACTIVE_CR, \
+ .enable_mask = LDO_ENABLE_MASK, \
+ .enable_val = 1, \
+ .disable_val = 0, \
+}
+
+#define REG_LDO3(ids, base) { \
+ .n_voltages = 32, \
+ .ops = &stpmic1_ldo3_ops, \
+ .linear_ranges = ldo3_ranges, \
+ .n_linear_ranges = ARRAY_SIZE(ldo3_ranges), \
+ .vsel_reg = LDO3_ACTIVE_CR, \
+ .vsel_mask = LDO_VOLTAGE_MASK, \
+ .enable_reg = LDO3_ACTIVE_CR, \
+ .enable_mask = LDO_ENABLE_MASK, \
+ .enable_val = 1, \
+ .disable_val = 0, \
+}
+
+#define REG_LDO4(ids, base) { \
+ .n_voltages = 1, \
+ .ops = &stpmic1_ldo4_fixed_regul_ops, \
+ .min_uV = 3300000, \
+ .enable_reg = LDO4_ACTIVE_CR, \
+ .enable_mask = LDO_ENABLE_MASK, \
+ .enable_val = 1, \
+ .disable_val = 0, \
+}
+
+#define REG_BUCK(ids, base) { \
+ .ops = &stpmic1_buck_ops, \
+ .n_voltages = 64, \
+ .linear_ranges = base ## _ranges, \
+ .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \
+ .vsel_reg = ids##_ACTIVE_CR, \
+ .vsel_mask = BUCK_VOLTAGE_MASK, \
+ .enable_reg = ids##_ACTIVE_CR, \
+ .enable_mask = BUCK_ENABLE_MASK, \
+ .enable_val = 1, \
+ .disable_val = 0, \
+}
+
+#define REG_VREF_DDR(ids, base) { \
+ .n_voltages = 1, \
+ .ops = &stpmic1_vref_ddr_ops, \
+ .min_uV = 500000, \
+ .enable_reg = VREF_DDR_ACTIVE_CR, \
+ .enable_mask = BUCK_ENABLE_MASK, \
+ .enable_val = 1, \
+ .disable_val = 0, \
+}
+
+#define REG_BOOST(ids, base) { \
+ .n_voltages = 1, \
+ .ops = &stpmic1_boost_regul_ops, \
+ .min_uV = 0, \
+ .enable_reg = BST_SW_CR, \
+ .enable_mask = BOOST_ENABLED, \
+ .enable_val = BOOST_ENABLED, \
+ .disable_val = 0, \
+}
+
+#define REG_VBUS_OTG(ids, base) { \
+ .n_voltages = 1, \
+ .ops = &stpmic1_switch_regul_ops, \
+ .min_uV = 0, \
+ .enable_reg = BST_SW_CR, \
+ .enable_mask = USBSW_OTG_SWITCH_ENABLED, \
+ .enable_val = USBSW_OTG_SWITCH_ENABLED, \
+ .disable_val = 0, \
+}
+
+#define REG_SW_OUT(ids, base) { \
+ .n_voltages = 1, \
+ .ops = &stpmic1_switch_regul_ops, \
+ .min_uV = 0, \
+ .enable_reg = BST_SW_CR, \
+ .enable_mask = SWIN_SWOUT_ENABLED, \
+ .enable_val = SWIN_SWOUT_ENABLED, \
+ .disable_val = 0, \
+}
+
+static struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
+ [STPMIC1_BUCK1] = {
+ .desc = REG_BUCK(BUCK1, buck1),
+ .icc_reg = BUCKS_ICCTO_CR,
+ .icc_mask = BIT(0),
+ .mask_reset_reg = BUCKS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(0),
+ },
+ [STPMIC1_BUCK2] = {
+ .desc = REG_BUCK(BUCK2, buck2),
+ .icc_reg = BUCKS_ICCTO_CR,
+ .icc_mask = BIT(1),
+ .mask_reset_reg = BUCKS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(1),
+ },
+ [STPMIC1_BUCK3] = {
+ .desc = REG_BUCK(BUCK3, buck3),
+ .icc_reg = BUCKS_ICCTO_CR,
+ .icc_mask = BIT(2),
+ .mask_reset_reg = BUCKS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(2),
+ },
+ [STPMIC1_BUCK4] = {
+ .desc = REG_BUCK(BUCK4, buck4),
+ .icc_reg = BUCKS_ICCTO_CR,
+ .icc_mask = BIT(3),
+ .mask_reset_reg = BUCKS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(3),
+ },
+ [STPMIC1_LDO1] = {
+ .desc = REG_LDO(LDO1, ldo1),
+ .icc_reg = LDOS_ICCTO_CR,
+ .icc_mask = BIT(0),
+ .mask_reset_reg = LDOS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(0),
+ },
+ [STPMIC1_LDO2] = {
+ .desc = REG_LDO(LDO2, ldo2),
+ .icc_reg = LDOS_ICCTO_CR,
+ .icc_mask = BIT(1),
+ .mask_reset_reg = LDOS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(1),
+ },
+ [STPMIC1_LDO3] = {
+ .desc = REG_LDO3(LDO3, ldo3),
+ .icc_reg = LDOS_ICCTO_CR,
+ .icc_mask = BIT(2),
+ .mask_reset_reg = LDOS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(2),
+ },
+ [STPMIC1_LDO4] = {
+ .desc = REG_LDO4(LDO4, ldo4),
+ .icc_reg = LDOS_ICCTO_CR,
+ .icc_mask = BIT(3),
+ .mask_reset_reg = LDOS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(3),
+ },
+ [STPMIC1_LDO5] = {
+ .desc = REG_LDO(LDO5, ldo5),
+ .icc_reg = LDOS_ICCTO_CR,
+ .icc_mask = BIT(4),
+ .mask_reset_reg = LDOS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(4),
+ },
+ [STPMIC1_LDO6] = {
+ .desc = REG_LDO(LDO6, ldo6),
+ .icc_reg = LDOS_ICCTO_CR,
+ .icc_mask = BIT(5),
+ .mask_reset_reg = LDOS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(5),
+ },
+ [STPMIC1_VREF_DDR] = {
+ .desc = REG_VREF_DDR(VREF_DDR, vref_ddr),
+ .mask_reset_reg = LDOS_MASK_RESET_CR,
+ .mask_reset_mask = BIT(6),
+ },
+ [STPMIC1_BOOST] = {
+ .desc = REG_BOOST(BOOST, boost),
+ .icc_reg = BUCKS_ICCTO_CR,
+ .icc_mask = BIT(6),
+ },
+ [STPMIC1_VBUS_OTG] = {
+ .desc = REG_VBUS_OTG(VBUS_OTG, pwr_sw1),
+ .icc_reg = BUCKS_ICCTO_CR,
+ .icc_mask = BIT(4),
+ },
+ [STPMIC1_SW_OUT] = {
+ .desc = REG_SW_OUT(SW_OUT, pwr_sw2),
+ .icc_reg = BUCKS_ICCTO_CR,
+ .icc_mask = BIT(5),
+ },
+};
+
+#define MATCH(_name, _id) \
+ [STPMIC1_##_id] = { \
+ .name = #_name, \
+ .desc = &stpmic1_regulator_cfgs[STPMIC1_##_id].desc, \
+ }
+
+static struct of_regulator_match stpmic1_matches[] = {
+ MATCH(buck1, BUCK1),
+ MATCH(buck2, BUCK2),
+ MATCH(buck3, BUCK3),
+ MATCH(buck4, BUCK4),
+ MATCH(ldo1, LDO1),
+ MATCH(ldo2, LDO2),
+ MATCH(ldo3, LDO3),
+ MATCH(ldo4, LDO4),
+ MATCH(ldo5, LDO5),
+ MATCH(ldo6, LDO6),
+ MATCH(vref_ddr, VREF_DDR),
+ MATCH(boost, BOOST),
+ MATCH(pwr_sw1, VBUS_OTG),
+ MATCH(pwr_sw2, SW_OUT),
+};
+
+static int stpmic1_regulator_register(struct device_d *dev, int id,
+ struct of_regulator_match *match,
+ struct stpmic1_regulator_cfg *cfg)
+{
+ int ret;
+
+ cfg->dev = dev;
+ cfg->rdev.desc = &cfg->desc;
+ cfg->rdev.regmap = dev_get_regmap(dev->parent, NULL);
+ if (IS_ERR(cfg->rdev.regmap))
+ return PTR_ERR(cfg->rdev.regmap);
+
+ ret = of_regulator_register(&cfg->rdev, match->of_node);
+ if (ret) {
+ dev_err(dev, "failed to register %s regulator\n", match->name);
+ return ret;
+ }
+
+ dev_dbg(dev, "registered %s\n", match->name);
+
+ return 0;
+}
+
+static int stpmic1_regulator_probe(struct device_d *dev)
+{
+ int i, ret;
+
+ ret = of_regulator_match(dev, dev->device_node, stpmic1_matches,
+ ARRAY_SIZE(stpmic1_matches));
+ if (ret < 0) {
+ dev_err(dev, "Error in PMIC regulator device tree node");
+ return ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) {
+ ret = stpmic1_regulator_register(dev, i, &stpmic1_matches[i],
+ &stpmic1_regulator_cfgs[i]);
+ if (ret < 0)
+ return ret;
+ }
+
+ dev_info(dev, "probed\n");
+
+ return 0;
+}
+
+static __maybe_unused const struct of_device_id stpmic1_regulator_of_match[] = {
+ { .compatible = "st,stpmic1-regulators" },
+ { /* sentinel */ },
+};
+
+static struct driver_d stpmic1_regulator_driver = {
+ .name = "stpmic1-regulator",
+ .probe = stpmic1_regulator_probe,
+ .of_compatible = DRV_OF_COMPAT(stpmic1_regulator_of_match),
+};
+device_platform_driver(stpmic1_regulator_driver);
diff --git a/include/linux/mfd/stpmic1.h b/include/linux/mfd/stpmic1.h
new file mode 100644
index 000000000000..fa3f99f7e9a1
--- /dev/null
+++ b/include/linux/mfd/stpmic1.h
@@ -0,0 +1,212 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Philippe Peurichard <philippe.peurichard@st.com>,
+ * Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+ */
+
+#ifndef __LINUX_MFD_STPMIC1_H
+#define __LINUX_MFD_STPMIC1_H
+
+#define TURN_ON_SR 0x1
+#define TURN_OFF_SR 0x2
+#define ICC_LDO_TURN_OFF_SR 0x3
+#define ICC_BUCK_TURN_OFF_SR 0x4
+#define RREQ_STATE_SR 0x5
+#define VERSION_SR 0x6
+
+#define SWOFF_PWRCTRL_CR 0x10
+#define PADS_PULL_CR 0x11
+#define BUCKS_PD_CR 0x12
+#define LDO14_PD_CR 0x13
+#define LDO56_VREF_PD_CR 0x14
+#define VBUS_DET_VIN_CR 0x15
+#define PKEY_TURNOFF_CR 0x16
+#define BUCKS_MASK_RANK_CR 0x17
+#define BUCKS_MASK_RESET_CR 0x18
+#define LDOS_MASK_RANK_CR 0x19
+#define LDOS_MASK_RESET_CR 0x1A
+#define WCHDG_CR 0x1B
+#define WCHDG_TIMER_CR 0x1C
+#define BUCKS_ICCTO_CR 0x1D
+#define LDOS_ICCTO_CR 0x1E
+
+#define BUCK1_ACTIVE_CR 0x20
+#define BUCK2_ACTIVE_CR 0x21
+#define BUCK3_ACTIVE_CR 0x22
+#define BUCK4_ACTIVE_CR 0x23
+#define VREF_DDR_ACTIVE_CR 0x24
+#define LDO1_ACTIVE_CR 0x25
+#define LDO2_ACTIVE_CR 0x26
+#define LDO3_ACTIVE_CR 0x27
+#define LDO4_ACTIVE_CR 0x28
+#define LDO5_ACTIVE_CR 0x29
+#define LDO6_ACTIVE_CR 0x2A
+
+#define BUCK1_STDBY_CR 0x30
+#define BUCK2_STDBY_CR 0x31
+#define BUCK3_STDBY_CR 0x32
+#define BUCK4_STDBY_CR 0x33
+#define VREF_DDR_STDBY_CR 0x34
+#define LDO1_STDBY_CR 0x35
+#define LDO2_STDBY_CR 0x36
+#define LDO3_STDBY_CR 0x37
+#define LDO4_STDBY_CR 0x38
+#define LDO5_STDBY_CR 0x39
+#define LDO6_STDBY_CR 0x3A
+
+#define BST_SW_CR 0x40
+
+#define INT_PENDING_R1 0x50
+#define INT_PENDING_R2 0x51
+#define INT_PENDING_R3 0x52
+#define INT_PENDING_R4 0x53
+
+#define INT_DBG_LATCH_R1 0x60
+#define INT_DBG_LATCH_R2 0x61
+#define INT_DBG_LATCH_R3 0x62
+#define INT_DBG_LATCH_R4 0x63
+
+#define INT_CLEAR_R1 0x70
+#define INT_CLEAR_R2 0x71
+#define INT_CLEAR_R3 0x72
+#define INT_CLEAR_R4 0x73
+
+#define INT_MASK_R1 0x80
+#define INT_MASK_R2 0x81
+#define INT_MASK_R3 0x82
+#define INT_MASK_R4 0x83
+
+#define INT_SET_MASK_R1 0x90
+#define INT_SET_MASK_R2 0x91
+#define INT_SET_MASK_R3 0x92
+#define INT_SET_MASK_R4 0x93
+
+#define INT_CLEAR_MASK_R1 0xA0
+#define INT_CLEAR_MASK_R2 0xA1
+#define INT_CLEAR_MASK_R3 0xA2
+#define INT_CLEAR_MASK_R4 0xA3
+
+#define INT_SRC_R1 0xB0
+#define INT_SRC_R2 0xB1
+#define INT_SRC_R3 0xB2
+#define INT_SRC_R4 0xB3
+
+#define PMIC_MAX_REGISTER_ADDRESS INT_SRC_R4
+
+#define STPMIC1_PMIC_NUM_IRQ_REGS 4
+
+#define TURN_OFF_SR_ICC_EVENT 0x08
+
+#define LDO_VOLTAGE_MASK GENMASK(6, 2)
+#define BUCK_VOLTAGE_MASK GENMASK(7, 2)
+#define LDO_BUCK_VOLTAGE_SHIFT 2
+
+#define LDO_ENABLE_MASK BIT(0)
+#define BUCK_ENABLE_MASK BIT(0)
+
+#define BUCK_HPLP_ENABLE_MASK BIT(1)
+#define BUCK_HPLP_SHIFT 1
+
+#define STDBY_ENABLE_MASK BIT(0)
+
+#define BUCKS_PD_CR_REG_MASK GENMASK(7, 0)
+#define BUCK_MASK_RANK_REGISTER_MASK GENMASK(3, 0)
+#define BUCK_MASK_RESET_REGISTER_MASK GENMASK(3, 0)
+#define LDO1234_PULL_DOWN_REGISTER_MASK GENMASK(7, 0)
+#define LDO56_VREF_PD_CR_REG_MASK GENMASK(5, 0)
+#define LDO_MASK_RANK_REGISTER_MASK GENMASK(5, 0)
+#define LDO_MASK_RESET_REGISTER_MASK GENMASK(5, 0)
+
+#define BUCK1_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK1_PULL_DOWN_MASK BIT(0)
+#define BUCK2_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK2_PULL_DOWN_MASK BIT(2)
+#define BUCK3_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK3_PULL_DOWN_MASK BIT(4)
+#define BUCK4_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK4_PULL_DOWN_MASK BIT(6)
+
+#define LDO1_PULL_DOWN_REG LDO14_PD_CR
+#define LDO1_PULL_DOWN_MASK BIT(0)
+#define LDO2_PULL_DOWN_REG LDO14_PD_CR
+#define LDO2_PULL_DOWN_MASK BIT(2)
+#define LDO3_PULL_DOWN_REG LDO14_PD_CR
+#define LDO3_PULL_DOWN_MASK BIT(4)
+#define LDO4_PULL_DOWN_REG LDO14_PD_CR
+#define LDO4_PULL_DOWN_MASK BIT(6)
+#define LDO5_PULL_DOWN_REG LDO56_VREF_PD_CR
+#define LDO5_PULL_DOWN_MASK BIT(0)
+#define LDO6_PULL_DOWN_REG LDO56_VREF_PD_CR
+#define LDO6_PULL_DOWN_MASK BIT(2)
+#define VREF_DDR_PULL_DOWN_REG LDO56_VREF_PD_CR
+#define VREF_DDR_PULL_DOWN_MASK BIT(4)
+
+#define BUCKS_ICCTO_CR_REG_MASK GENMASK(6, 0)
+#define LDOS_ICCTO_CR_REG_MASK GENMASK(5, 0)
+
+#define LDO_BYPASS_MASK BIT(7)
+
+/* Main PMIC Control Register
+ * SWOFF_PWRCTRL_CR
+ * Address : 0x10
+ */
+#define ICC_EVENT_ENABLED BIT(4)
+#define PWRCTRL_POLARITY_HIGH BIT(3)
+#define PWRCTRL_PIN_VALID BIT(2)
+#define RESTART_REQUEST_ENABLED BIT(1)
+#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0)
+
+/* Main PMIC PADS Control Register
+ * PADS_PULL_CR
+ * Address : 0x11
+ */
+#define WAKEUP_DETECTOR_DISABLED BIT(4)
+#define PWRCTRL_PD_ACTIVE BIT(3)
+#define PWRCTRL_PU_ACTIVE BIT(2)
+#define WAKEUP_PD_ACTIVE BIT(1)
+#define PONKEY_PU_INACTIVE BIT(0)
+
+/* Main PMIC VINLOW Control Register
+ * VBUS_DET_VIN_CRC DMSC
+ * Address : 0x15
+ */
+#define SWIN_DETECTOR_ENABLED BIT(7)
+#define SWOUT_DETECTOR_ENABLED BIT(6)
+#define VINLOW_ENABLED BIT(0)
+#define VINLOW_CTRL_REG_MASK GENMASK(7, 0)
+
+/* USB Control Register
+ * Address : 0x40
+ */
+#define BOOST_OVP_DISABLED BIT(7)
+#define VBUS_OTG_DETECTION_DISABLED BIT(6)
+#define SW_OUT_DISCHARGE BIT(5)
+#define VBUS_OTG_DISCHARGE BIT(4)
+#define OCP_LIMIT_HIGH BIT(3)
+#define SWIN_SWOUT_ENABLED BIT(2)
+#define USBSW_OTG_SWITCH_ENABLED BIT(1)
+#define BOOST_ENABLED BIT(0)
+
+/* PKEY_TURNOFF_CR
+ * Address : 0x16
+ */
+#define PONKEY_PWR_OFF BIT(7)
+#define PONKEY_CC_FLAG_CLEAR BIT(6)
+#define PONKEY_TURNOFF_TIMER_MASK GENMASK(3, 0)
+#define PONKEY_TURNOFF_MASK GENMASK(7, 0)
+
+/*
+ * struct stpmic1 - stpmic1 master device for sub-drivers
+ * @dev: master device of the chip (can be used to access platform data)
+ * @irq: main IRQ number
+ * @regmap_irq_chip_data: irq chip data
+ */
+struct stpmic1 {
+ struct device *dev;
+ struct regmap *regmap;
+ int irq;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+#endif /* __LINUX_MFD_STPMIC1_H */
--
2.24.0.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 14+ messages in thread