mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH 02/18] ARM: zynq: add trivial image build mechanism
Date: Thu,  7 Nov 2019 22:11:03 +0100	[thread overview]
Message-ID: <20191107211119.68064-3-dev@lynxeye.de> (raw)
In-Reply-To: <20191107211119.68064-1-dev@lynxeye.de>

Currently this just calls the zynq_mkimage script to stamp in the header
checksum. Can be extended to a proper multi-image build later on.

This requires a PBL to be build, but as the only supported Zynq board
already selects the PBL option in the defconfig there is no big change
to the previous status

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
 arch/arm/Kconfig                    |  1 +
 arch/arm/configs/zedboard_defconfig |  1 -
 images/Makefile                     |  3 ++-
 images/Makefile.zynq                | 12 ++++++++++++
 4 files changed, 15 insertions(+), 2 deletions(-)
 create mode 100644 images/Makefile.zynq

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f4e943a8fd8a..78260a4fd76d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -248,6 +248,7 @@ config ARCH_UEMD
 config ARCH_ZYNQ
 	bool "Xilinx Zynq-based boards"
 	select HAS_DEBUG_LL
+	select PBL_IMAGE
 
 config ARCH_ZYNQMP
 	bool "Xilinx ZynqMP-based boards"
diff --git a/arch/arm/configs/zedboard_defconfig b/arch/arm/configs/zedboard_defconfig
index be5720fd42b5..0e5078c40246 100644
--- a/arch/arm/configs/zedboard_defconfig
+++ b/arch/arm/configs/zedboard_defconfig
@@ -1,7 +1,6 @@
 CONFIG_ARCH_ZYNQ=y
 CONFIG_AEABI=y
 CONFIG_ARM_UNWIND=y
-CONFIG_PBL_IMAGE=y
 CONFIG_MMU=y
 CONFIG_STACK_SIZE=0xf000
 CONFIG_MALLOC_SIZE=0x8000000
diff --git a/images/Makefile b/images/Makefile
index ceb00618d23b..34b7a56101cc 100644
--- a/images/Makefile
+++ b/images/Makefile
@@ -161,6 +161,7 @@ include $(srctree)/images/Makefile.tegra
 include $(srctree)/images/Makefile.vexpress
 include $(srctree)/images/Makefile.xburst
 include $(srctree)/images/Makefile.at91
+include $(srctree)/images/Makefile.zynq
 include $(srctree)/images/Makefile.zynqmp
 include $(srctree)/images/Makefile.layerscape
 
@@ -208,5 +209,5 @@ $(flash-list): $(image-y-path)
 clean-files := *.pbl *.pblb *.map start_*.imximg *.img barebox.z start_*.kwbimg \
 	start_*.kwbuartimg *.socfpgaimg *.mlo *.t20img *.t20img.cfg *.t30img \
 	*.t30img.cfg *.t124img *.t124img.cfg *.mlospi *.mlo *.mxsbs *.mxssd \
-	start_*.simximg start_*.usimximg *.image
+	start_*.simximg start_*.usimximg *.zynqimg *.image
 clean-files += pbl.lds
diff --git a/images/Makefile.zynq b/images/Makefile.zynq
new file mode 100644
index 000000000000..e162aafae336
--- /dev/null
+++ b/images/Makefile.zynq
@@ -0,0 +1,12 @@
+#
+# barebox image generation Makefile for Xilinx Zynq images
+#
+quiet_cmd_zynq_image = ZYNQIMG  $@
+      cmd_zynq_image = $(objtree)/scripts/zynq_mkimage $(subst .zynqimg,,$@) $@
+$(obj)/%.zynqimg: $(obj)/% FORCE
+	$(call if_changed,zynq_image)
+
+#------------------------------------------------------------------------------
+
+FILE_barebox-avnet-zedboard.img = start_pbl.pblb.zynqimg
+image-$(CONFIG_MACH_ZEDBOARD) += barebox-avnet-zedboard.img
-- 
2.23.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-11-07 21:12 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-07 21:11 [PATCH 00/18] Zynq multi-image conversion and improvements Lucas Stach
2019-11-07 21:11 ` [PATCH 01/18] ARM: zynq: zedboard: enable MACB driver in defconfig Lucas Stach
2019-11-07 21:11 ` Lucas Stach [this message]
2019-11-07 21:11 ` [PATCH 03/18] ARM: zynq: use getopt in zynq_mkimage Lucas Stach
2019-11-07 21:11 ` [PATCH 04/18] ARM: zynq: move header generation to zynq_mkimage Lucas Stach
2019-11-07 21:11 ` [PATCH 05/18] ARM: zynq: add size check in zynq_mkimage Lucas Stach
2019-11-07 21:11 ` [PATCH 06/18] ARM: zynq: zedboard: provide DTB Lucas Stach
2019-11-07 21:11 ` [PATCH 07/18] net: macb: handle more clocks Lucas Stach
2019-11-07 21:11 ` [PATCH 08/18] net: macb: add Zynq compatible Lucas Stach
2019-11-07 21:11 ` [PATCH 09/18] ARM: zynq: move clock controller driver to drivers/clk Lucas Stach
2019-11-07 21:11 ` [PATCH 10/18] clk: zynq: use base address of clock controller Lucas Stach
2019-11-07 21:11 ` [PATCH 11/18] ARM: zynq: fixup SLCR ranges Lucas Stach
2019-11-08  7:16   ` Sascha Hauer
2019-11-07 21:11 ` [PATCH 12/18] clk: zynq: improve PLL enable handling Lucas Stach
2019-11-07 21:11 ` [PATCH 13/18] clk: zynq: partially sync with Linux Lucas Stach
2019-11-07 21:11 ` [PATCH 14/18] ARM: zynq: switch to DT based probing Lucas Stach
2019-11-07 21:11 ` [PATCH 15/18] clk: zynq: remove clkdevs Lucas Stach
2019-11-07 21:11 ` [PATCH 16/18] ARM: zynq: switch to multi-image build Lucas Stach
2019-11-07 21:11 ` [PATCH 17/18] bootsource: add JTAG bootsource Lucas Stach
2019-11-07 21:11 ` [PATCH 18/18] ARM: zynq: add bootsource detection Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191107211119.68064-3-dev@lynxeye.de \
    --to=dev@lynxeye.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox