From: Lucas Stach <l.stach@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 02/39] ratp: add more build dependencies
Date: Fri, 29 Nov 2019 16:14:28 +0100 [thread overview]
Message-ID: <20191129151505.23946-3-l.stach@pengutronix.de> (raw)
In-Reply-To: <20191129151505.23946-1-l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
common/ratp/Kconfig | 1 +
lib/Kconfig | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/common/ratp/Kconfig b/common/ratp/Kconfig
index 30462c6c9759..25150addfd75 100644
--- a/common/ratp/Kconfig
+++ b/common/ratp/Kconfig
@@ -6,6 +6,7 @@ config CONSOLE_RATP
select POLLER
select CMDLINE_EDITING
depends on CONSOLE_FULL
+ depends on !SHELL_NONE
prompt "RATP console support"
help
This option adds support for remote controlling barebox via serial
diff --git a/lib/Kconfig b/lib/Kconfig
index 6216fdd6bac0..9a80780186a5 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -105,6 +105,11 @@ config LIBFDT
config RATP
select CRC_ITU_T
+ select COMPILE_MEMORY
+ select COMMAND_SUPPORT
+ select POLLER
+ depends on CONSOLE_FULL
+ depends on !SHELL_NONE
bool "RATP protocol support"
help
Reliable Asynchronous Transfer Protocol (RATP) is a protocol for reliably
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-11-29 15:15 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-29 15:14 [PATCH 00/39] randcfg build fixes Lucas Stach
2019-11-29 15:14 ` [PATCH 01/39] ARM: imx: add image type choice Lucas Stach
2019-12-02 10:07 ` Sascha Hauer
2019-12-02 10:51 ` Lucas Stach
2019-12-04 7:26 ` Sascha Hauer
2019-11-29 15:14 ` Lucas Stach [this message]
2019-11-29 15:14 ` [PATCH 03/39] ARM: move into ARM32 specific optee kernel start into lib32 dir Lucas Stach
2019-11-29 15:14 ` [PATCH 04/39] ARM: implement CONFIG_PBL_BREAK for ARM64 Lucas Stach
2019-11-29 15:14 ` [PATCH 05/39] lib: zstd: declare locally used functions as static Lucas Stach
2019-11-29 15:14 ` [PATCH 06/39] common: provide stubs for ctrlc_* functions Lucas Stach
2019-11-29 15:14 ` [PATCH 07/39] commands: keystore: use correct type for s_len Lucas Stach
2019-11-29 15:14 ` [PATCH 08/39] gui: picopng: declare locally used functions as static Lucas Stach
2019-11-29 15:14 ` [PATCH 09/39] reset_source: add stub for reset_source_set_device Lucas Stach
2019-11-29 15:14 ` [PATCH 10/39] spi: fix symbol export for spi_register_controller Lucas Stach
2019-11-29 15:14 ` [PATCH 11/39] mfd: superio: add missing semicolon after EXPORT_SYMBOL Lucas Stach
2019-11-29 15:14 ` [PATCH 12/39] ARM: psci: declare locally used functions as static Lucas Stach
2019-11-29 15:14 ` [PATCH 13/39] ARM: mxs: bcb: " Lucas Stach
2019-11-29 15:14 ` [PATCH 14/39] usb: dwc3: depend on OFDEVICE Lucas Stach
2019-11-29 15:14 ` [PATCH 15/39] mtd: nand: don't call BBT functions if BBT support isn't built Lucas Stach
2019-11-29 15:14 ` [PATCH 16/39] mfd: da9063: don't try to register gpiochip when GPIOLIB " Lucas Stach
2019-11-29 15:14 ` [PATCH 17/39] mci: MCI_IMX_ESDHC_PBL has no dependency on MCI Lucas Stach
2019-11-29 15:14 ` [PATCH 18/39] i2c: always walk down into i2c/busses Makefile Lucas Stach
2019-11-29 15:14 ` [PATCH 19/39] usb: usb251xb: depend on OFDEVICE Lucas Stach
2019-11-29 15:14 ` [PATCH 20/39] pstore: don't try to grab non-existent logbuf Lucas Stach
2019-11-29 15:14 ` [PATCH 21/39] firmware: zynqmp-fpga: fix comparison between pointer and integer Lucas Stach
2019-11-29 15:14 ` [PATCH 22/39] pstore: ramoops: use correct format specifier for size_t variables Lucas Stach
2019-11-29 15:14 ` [PATCH 23/39] clocksource: ARMv8 timer can only be built on ARMv8 Lucas Stach
2019-11-29 15:14 ` [PATCH 24/39] input: select POLLER Lucas Stach
2019-11-29 15:14 ` [PATCH 25/39] ARM: layerscape: add missing selects for TQMLS1046A Lucas Stach
2019-11-29 15:14 ` [PATCH 26/39] ARM: PBL break is not available on ARMv4 Lucas Stach
2019-11-29 15:14 ` [PATCH 27/39] ARM: ARM_SMCCC is only available on >= ARMv7 Lucas Stach
2019-11-29 15:14 ` [PATCH 28/39] ARM: layerscape: select OFTREE and OFDEVICE Lucas Stach
2019-11-29 15:14 ` [PATCH 29/39] usb: dwc3: dual role mode needs gadget support Lucas Stach
2019-11-29 15:14 ` [PATCH 30/39] pinctrl: at91pio4: move to correct location in Kconfig Lucas Stach
2019-11-29 15:14 ` [PATCH 31/39] ARM: layerscape: ppa: use sync_for_execution instead of a manual cache flush Lucas Stach
2019-11-29 15:14 ` [PATCH 32/39] ubootvarfs: depend on OFTREE Lucas Stach
2019-11-29 15:14 ` [PATCH 33/39] ARM: davinci: virt2real: select OFTREE and OFDEVICE Lucas Stach
2019-11-29 15:15 ` [PATCH 34/39] ARM: omap: pfc200: NAND support requires CONFIG_OMAP_GPMC Lucas Stach
2019-11-29 15:15 ` [PATCH 35/39] net: designware-eqos: depend on COMMON_CLK Lucas Stach
2019-11-29 15:15 ` [PATCH 36/39] ARM: mvebu: correct DTB rule for MARVELL_ARMADA_XP_DB Lucas Stach
2019-11-29 15:15 ` [PATCH 37/39] nvme: correct symbol export name for nvme_submit_sync_cmd Lucas Stach
2019-11-29 15:15 ` [PATCH 38/39] pinctrl: tegra: mark drvdata as maybe unused Lucas Stach
2019-11-29 15:15 ` [PATCH 39/39] pinctrl: at91pio4 depends on OFDEVICE Lucas Stach
2019-12-02 8:44 ` [PATCH 00/39] randcfg build fixes Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191129151505.23946-3-l.stach@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox