From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 06/10] regulator: add function to get regulator by its name
Date: Fri, 20 Dec 2019 15:32:28 +0100 [thread overview]
Message-ID: <20191220143232.28354-7-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20191220143232.28354-1-s.hauer@pengutronix.de>
Useful for getting regulators that are not correctly associated with a
device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/regulator/core.c | 30 +++++++++++++++++++++++++++++-
include/regulator.h | 1 +
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 4ca035ae94..f0de7a52e3 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -327,6 +327,34 @@ struct regulator *regulator_get(struct device_d *dev, const char *supply)
return r;
}
+static struct regulator_internal *regulator_by_name(const char *name)
+{
+ struct regulator_internal *ri;
+
+ list_for_each_entry(ri, ®ulator_list, list)
+ if (ri->name && !strcmp(ri->name, name))
+ return ri;
+
+ return NULL;
+}
+
+struct regulator *regulator_get_name(const char *name)
+{
+ struct regulator_internal *ri;
+ struct regulator *r;
+
+ ri = regulator_by_name(name);
+ if (!ri)
+ return ERR_PTR(-ENODEV);
+
+ r = xzalloc(sizeof(*r));
+ r->ri = ri;
+
+ list_add_tail(&r->list, &ri->consumer_list);
+
+ return r;
+}
+
/*
* regulator_enable - enable a regulator.
* @r: the regulator to enable
@@ -379,7 +407,7 @@ static void regulator_print_one(struct regulator_internal *ri)
printf(" consumers:\n");
list_for_each_entry(r, &ri->consumer_list, list)
- printf(" %s\n", dev_name(r->dev));
+ printf(" %s\n", r->dev ? dev_name(r->dev) : "none");
}
}
diff --git a/include/regulator.h b/include/regulator.h
index 156acb82f8..a445c5c3d1 100644
--- a/include/regulator.h
+++ b/include/regulator.h
@@ -116,6 +116,7 @@ void regulators_print(void);
#ifdef CONFIG_REGULATOR
struct regulator *regulator_get(struct device_d *, const char *);
+struct regulator *regulator_get_name(const char *name);
int regulator_enable(struct regulator *);
int regulator_disable(struct regulator *);
int regulator_is_enabled_regmap(struct regulator_dev *);
--
2.24.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-12-20 14:32 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 14:32 [PATCH 00/10] Add Raspberry Pi USB support Sascha Hauer
2019-12-20 14:32 ` [PATCH 01/10] usb: Make timeout unit clear Sascha Hauer
2019-12-20 14:32 ` [PATCH 02/10] of: Add of_bus_n_xxx_cells() Sascha Hauer
2019-12-20 14:32 ` [PATCH 03/10] device: Introduce dma_offset Sascha Hauer
2019-12-20 14:32 ` [PATCH 04/10] of: Read dma_offset from device tree Sascha Hauer
2019-12-20 14:32 ` [PATCH 05/10] usb: Add usbroothubdes.h Sascha Hauer
2019-12-20 14:32 ` Sascha Hauer [this message]
2019-12-20 14:32 ` [PATCH 07/10] rpi: Enable USB Power domain during startup Sascha Hauer
2019-12-20 14:32 ` [PATCH 08/10] usb: Forward error code from usb_set_configuration Sascha Hauer
2019-12-20 14:32 ` [PATCH 09/10] usb: Add dwc2 host driver Sascha Hauer
2020-01-14 13:21 ` [RFC PATCH 0/7] usb: " Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 1/7] usb: dwc2: Add host controller driver Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 2/7] usb: dwc2: host: Handle dma mapping errors Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 3/7] usb: dwc2: Dynamic fifo size support from Linux Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 4/7] usb: dwc2: Rework roothub interface Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 5/7] HACK: usb: dwc2: Fix toggle reset Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 6/7] usb: dwc2: Rewrite dwc2_hc_init Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 7/7] usb: dwc2: Read dr_mode from device tree Jules Maselbas
2020-01-14 14:27 ` [RFC PATCH 0/7] usb: dwc2 host driver Sascha Hauer
2020-01-14 17:12 ` Jules Maselbas
2020-01-16 6:50 ` Sascha Hauer
2020-01-16 17:25 ` Jules Maselbas
2020-01-21 13:32 ` Michael Grzeschik
2019-12-20 14:32 ` [PATCH 10/10] ARM: rpi_defconfig: Enable networking support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191220143232.28354-7-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox