From: Sam Ravnborg <sam@ravnborg.org>
To: Lucas Stach <dev@lynxeye.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] lds: align RO_DATA_SECTION members
Date: Thu, 26 Dec 2019 10:11:30 +0100 [thread overview]
Message-ID: <20191226091130.GA3251@ravnborg.org> (raw)
In-Reply-To: <20191209080029.3905-1-dev@lynxeye.de>
Hi Lucas.
On Mon, Dec 09, 2019 at 09:00:29AM +0100, Lucas Stach wrote:
> When using the RO_DATA_SECTION macro, all the individual components
> are put into the rodata section. As they now end up in the same
> section there is no alignment enforced between them anymore. This
> leads to unaligned start pointers when any of the components have a
> unaligned size. Enforce some alignment between them.
>
> Fixes: c5d38e920101 (lds: Add and use RO_DATA_SECTION macro)
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
After a rather painful bisect I ended up with the commit
c5d38e920101 (lds: Add and use RO_DATA_SECTION macro) as the bad
commit.
So in my case missing the alignment prevented barebox from starting up.
The bisect was painful because this is a proprietary board
where I have too many patches accumulated - and my first attempt
pointed out used a good commit as bad (missing edits after applying
patches).
I saw a v2 of this patch that I already deleted from my mailbox,
but re-did it locally. That fixed barebox for me.
According to: http://lists.infradead.org/pipermail/barebox/2019-December/040439.html
the patch is applied - but I cannot find it neither in master nor in
next. Seems it has not been pushed out in the xmas rush.
You can add a:
Tested-by: Sam Ravnborg <sam@ravnborg.org> # fixes barebox startup on at91sam9263
in case it is relevant / doable.
Sam
> ---
> include/asm-generic/barebox.lds.h | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/include/asm-generic/barebox.lds.h b/include/asm-generic/barebox.lds.h
> index b6ca8eb2be27..113392d567fa 100644
> --- a/include/asm-generic/barebox.lds.h
> +++ b/include/asm-generic/barebox.lds.h
> @@ -17,6 +17,7 @@
> #endif
>
> #define BAREBOX_INITCALLS \
> + . = ALIGN(8); \
> __barebox_initcalls_start = .; \
> KEEP(*(.initcall.0)) \
> KEEP(*(.initcall.1)) \
> @@ -36,6 +37,7 @@
> __barebox_initcalls_end = .;
>
> #define BAREBOX_EXITCALLS \
> + . = ALIGN(8); \
> __barebox_exitcalls_start = .; \
> KEEP(*(.exitcall.0)) \
> KEEP(*(.exitcall.1)) \
> @@ -47,37 +49,44 @@
> __barebox_exitcalls_end = .;
>
> #define BAREBOX_CMDS \
> + . = ALIGN(8); \
> __barebox_cmd_start = .; \
> KEEP(*(SORT_BY_NAME(.barebox_cmd*))) \
> __barebox_cmd_end = .;
>
> #define BAREBOX_RATP_CMDS \
> + . = ALIGN(8); \
> __barebox_ratp_cmd_start = .; \
> KEEP(*(SORT_BY_NAME(.barebox_ratp_cmd*))) \
> __barebox_ratp_cmd_end = .;
>
> #define BAREBOX_SYMS \
> + . = ALIGN(8); \
> __usymtab_start = .; \
> KEEP(*(__usymtab)) \
> __usymtab_end = .;
>
> #define BAREBOX_MAGICVARS \
> + . = ALIGN(8); \
> __barebox_magicvar_start = .; \
> KEEP(*(SORT_BY_NAME(.barebox_magicvar*))) \
> __barebox_magicvar_end = .;
>
> #define BAREBOX_CLK_TABLE \
> + . = ALIGN(8); \
> __clk_of_table_start = .; \
> KEEP(*(.__clk_of_table)); \
> KEEP(*(.__clk_of_table_end)); \
> __clk_of_table_end = .;
>
> #define BAREBOX_DTB \
> + . = ALIGN(8); \
> __dtb_start = .; \
> KEEP(*(.dtb.rodata.*)); \
> __dtb_end = .;
>
> #define BAREBOX_IMD \
> + . = ALIGN(8); \
> KEEP(*(.barebox_imd_start)) \
> KEEP(*(.barebox_imd_1*)) \
> *(.barebox_imd_0*) \
> @@ -85,6 +94,7 @@
>
> #ifdef CONFIG_PCI
> #define BAREBOX_PCI_FIXUP \
> + . = ALIGN(8); \
> __start_pci_fixups_early = .; \
> KEEP(*(.pci_fixup_early)) \
> __end_pci_fixups_early = .; \
> @@ -99,6 +109,7 @@
> #endif
>
> #define BAREBOX_RSA_KEYS \
> + . = ALIGN(8); \
> __rsa_keys_start = .; \
> KEEP(*(.rsa_keys.rodata.*)); \
> __rsa_keys_end = .; \
> --
> 2.23.0
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2019-12-26 9:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-09 8:00 Lucas Stach
2019-12-09 9:05 ` Sam Ravnborg
2019-12-09 10:02 ` Lucas Stach
2019-12-26 9:11 ` Sam Ravnborg [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191226091130.GA3251@ravnborg.org \
--to=sam@ravnborg.org \
--cc=barebox@lists.infradead.org \
--cc=dev@lynxeye.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox