From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jules Maselbas <jmaselbas@kalray.eu>
Cc: Barebox List <barebox@lists.infradead.org>
Subject: Re: [RFC PATCH 0/7] usb: dwc2 host driver
Date: Tue, 14 Jan 2020 15:27:04 +0100 [thread overview]
Message-ID: <20200114142704.3t7vra5wlrzivi3n@pengutronix.de> (raw)
In-Reply-To: <20200114132112.4119-1-jmaselbas@kalray.eu>
Hi Jules,
On Tue, Jan 14, 2020 at 02:21:05PM +0100, Jules Maselbas wrote:
> Hi Sascha,
>
> I've been working on a driver for the dwc2 otg controller, for both host
> and device mode. Like you I've started from U-Boot driver and I mixed
> it with some part from Linux. For instance I've removed the register
> structs and I've been using the same defines for register bit-fields as
> in Linux.
>
> I would like to share my version of the host driver, as the gadget driver
> one still requires some cleanup. This series is not to be applied on the
> driver you proposed. However I am willing to propose a new series that can
> be applied on the driver you proposed. What do you think?
The dwc2 driver was a quick shot, I am all in for improvements. Removing
the register structs is very nice and I would be interested in gadget
support as well.
What SoC are you using the driver on?
I am not sure if it makes sense to rebase your patches on my driver. If
you can convince me that yours is better then we could just remove mine
and merge yours instead.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-01-14 14:27 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 14:32 [PATCH 00/10] Add Raspberry Pi USB support Sascha Hauer
2019-12-20 14:32 ` [PATCH 01/10] usb: Make timeout unit clear Sascha Hauer
2019-12-20 14:32 ` [PATCH 02/10] of: Add of_bus_n_xxx_cells() Sascha Hauer
2019-12-20 14:32 ` [PATCH 03/10] device: Introduce dma_offset Sascha Hauer
2019-12-20 14:32 ` [PATCH 04/10] of: Read dma_offset from device tree Sascha Hauer
2019-12-20 14:32 ` [PATCH 05/10] usb: Add usbroothubdes.h Sascha Hauer
2019-12-20 14:32 ` [PATCH 06/10] regulator: add function to get regulator by its name Sascha Hauer
2019-12-20 14:32 ` [PATCH 07/10] rpi: Enable USB Power domain during startup Sascha Hauer
2019-12-20 14:32 ` [PATCH 08/10] usb: Forward error code from usb_set_configuration Sascha Hauer
2019-12-20 14:32 ` [PATCH 09/10] usb: Add dwc2 host driver Sascha Hauer
2020-01-14 13:21 ` [RFC PATCH 0/7] usb: " Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 1/7] usb: dwc2: Add host controller driver Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 2/7] usb: dwc2: host: Handle dma mapping errors Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 3/7] usb: dwc2: Dynamic fifo size support from Linux Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 4/7] usb: dwc2: Rework roothub interface Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 5/7] HACK: usb: dwc2: Fix toggle reset Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 6/7] usb: dwc2: Rewrite dwc2_hc_init Jules Maselbas
2020-01-14 13:21 ` [RFC PATCH 7/7] usb: dwc2: Read dr_mode from device tree Jules Maselbas
2020-01-14 14:27 ` Sascha Hauer [this message]
2020-01-14 17:12 ` [RFC PATCH 0/7] usb: dwc2 host driver Jules Maselbas
2020-01-16 6:50 ` Sascha Hauer
2020-01-16 17:25 ` Jules Maselbas
2020-01-21 13:32 ` Michael Grzeschik
2019-12-20 14:32 ` [PATCH 10/10] ARM: rpi_defconfig: Enable networking support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114142704.3t7vra5wlrzivi3n@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=jmaselbas@kalray.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox