* [PATCH] imx25: drop global over-current setting for USB
@ 2020-01-15 10:33 Uwe Kleine-König
2020-01-16 8:30 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Uwe Kleine-König @ 2020-01-15 10:33 UTC (permalink / raw)
To: barebox
There is no mx25 board in mainline that actually uses USB. My
(out-of-tree) board has active low polarity which makes it necessary to
have
/delete-property/ over-current-active-high;
over-current-active-low;
in the board's dts which is ugly.
In the absence of this property Linux defaults to active-high and
encourages explicit configuration (see commit 1bf4743f641d ("usb:
chipidea: imx: Warn if oc polarity isn't specified")), so other external
board dts files likely already have this setting anyhow. (OK, maybe a
bit optimistic here :-)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
arch/arm/dts/imx25.dtsi | 8 --------
1 file changed, 8 deletions(-)
diff --git a/arch/arm/dts/imx25.dtsi b/arch/arm/dts/imx25.dtsi
index e72dbd5f3686..05678af71aae 100644
--- a/arch/arm/dts/imx25.dtsi
+++ b/arch/arm/dts/imx25.dtsi
@@ -24,11 +24,3 @@
&usbmisc {
status = "okay";
};
-
-&usbotg {
- over-current-active-high;
-};
-
-&usbhost1 {
- over-current-active-high;
-};
--
2.24.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] imx25: drop global over-current setting for USB
2020-01-15 10:33 [PATCH] imx25: drop global over-current setting for USB Uwe Kleine-König
@ 2020-01-16 8:30 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2020-01-16 8:30 UTC (permalink / raw)
To: Uwe Kleine-König; +Cc: barebox
On Wed, Jan 15, 2020 at 11:33:28AM +0100, Uwe Kleine-König wrote:
> There is no mx25 board in mainline that actually uses USB. My
> (out-of-tree) board has active low polarity which makes it necessary to
> have
>
> /delete-property/ over-current-active-high;
> over-current-active-low;
>
> in the board's dts which is ugly.
>
> In the absence of this property Linux defaults to active-high and
> encourages explicit configuration (see commit 1bf4743f641d ("usb:
> chipidea: imx: Warn if oc polarity isn't specified")), so other external
> board dts files likely already have this setting anyhow. (OK, maybe a
> bit optimistic here :-)
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> arch/arm/dts/imx25.dtsi | 8 --------
> 1 file changed, 8 deletions(-)
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-01-16 8:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-15 10:33 [PATCH] imx25: drop global over-current setting for USB Uwe Kleine-König
2020-01-16 8:30 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox