From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Subject: [PATCH v2 5/5] user: add documentation for OP-TEE loading
Date: Mon, 20 Jan 2020 09:56:48 +0100 [thread overview]
Message-ID: <20200120085647.19784-5-r.czerwinski@pengutronix.de> (raw)
In-Reply-To: <20200120085647.19784-1-r.czerwinski@pengutronix.de>
Some rudimentary documentation how to load OP-TEE.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
---
Documentation/user/optee.rst | 29 +++++++++++++++++++++++++++++
Documentation/user/user-manual.rst | 1 +
2 files changed, 30 insertions(+)
create mode 100644 Documentation/user/optee.rst
diff --git a/Documentation/user/optee.rst b/Documentation/user/optee.rst
new file mode 100644
index 0000000000..950917b446
--- /dev/null
+++ b/Documentation/user/optee.rst
@@ -0,0 +1,29 @@
+
+.. _optee:
+
+OP-TEE
+======
+
+Barebox is able to start the Open Portable Trusted Execution Environment
+(OP-TEE) either before starting the linux kernel or during lowlevel board
+initialization in the Pre Bootloader ``PBL``.
+
+Before Linux start
+------------------
+Enable the `CONFIG_BOOTM_OPTEE` configuration variable and configure the
+`CONFIG_OPTEE_SIZE` variable. This will reserve a memory area at the end
+of memory for OP-TEE to run, usually Barebox would relocate itself there. To
+load OP-TEE before the kernel is started, configure the global ``bootm.tee``
+variable to point to a valid OPTEE v1 binary.
+
+During the PBL
+--------------
+To start OP-TEE during the lowlevel initialization of your board in the ``PBL``,
+enable the ``CONFIG_PBL_OPTEE`` configuration variable. your board should then
+call the function ``start_optee_early(void* tee, void* fdt)`` with a valid tee
+and FDT. Ensure that your OP-TEE is compiled with ``CFG_NS_ENTRY_ADDR`` unset,
+otherwise OP-TEE will not correctly return to barebox after startup.
+Since OP-TEE in the default configuration also modifies the device tree, don't
+pass the barebox internal device tree, instead copy it into a different memory
+location and pass it to OP-TEE afterwards.
+The modified device tree can then be passed to the main barebox start function.
diff --git a/Documentation/user/user-manual.rst b/Documentation/user/user-manual.rst
index 41fdb8805c..827683eaa0 100644
--- a/Documentation/user/user-manual.rst
+++ b/Documentation/user/user-manual.rst
@@ -33,6 +33,7 @@ Contents:
system-reset
state
random
+ optee
debugging
watchdog
--
2.25.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2020-01-20 8:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-20 8:56 [PATCH v2 1/5] optee: move optee_verify_header() to common Rouven Czerwinski
2020-01-20 8:56 ` [PATCH v2 2/5] ARM: import setjmp implementation from U-Boot Rouven Czerwinski
2020-01-21 7:46 ` Sascha Hauer
2020-01-20 8:56 ` [PATCH v2 3/5] ARM: add optee early loading function Rouven Czerwinski
2020-01-20 8:56 ` [PATCH v2 4/5] ARM: mach-imx: test PL310 write access Rouven Czerwinski
2020-01-21 7:37 ` Sascha Hauer
2020-01-20 8:56 ` Rouven Czerwinski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200120085647.19784-5-r.czerwinski@pengutronix.de \
--to=r.czerwinski@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox