From: Jules Maselbas <jmaselbas@kalray.eu>
To: Barebox List <barebox@lists.infradead.org>
Cc: Jules Maselbas <jmaselbas@kalray.eu>
Subject: [RFC PATCH 8/9] usb: dwc2: gadget: Configure fifo size
Date: Wed, 22 Jan 2020 16:49:49 +0100 [thread overview]
Message-ID: <20200122154950.22746-9-jmaselbas@kalray.eu> (raw)
In-Reply-To: <20200122154950.22746-1-jmaselbas@kalray.eu>
Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
---
drivers/usb/dwc2/core.c | 86 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 5376a3586..ebb555f0d 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -87,6 +87,87 @@ void dwc2_set_param_phy_utmi_width(struct dwc2 *dwc2)
dwc2->params.phy_utmi_width = val;
}
+/**
+ * dwc2_hsotg_tx_fifo_count - return count of TX FIFOs in device mode
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+static int dwc2_tx_fifo_count(struct dwc2 *dwc2)
+{
+ if (dwc2->hw_params.en_multiple_tx_fifo)
+ /* In dedicated FIFO mode we need count of IN EPs */
+ return dwc2->hw_params.num_dev_in_eps;
+ else
+ /* In shared FIFO mode we need count of Periodic IN EPs */
+ return dwc2->hw_params.num_dev_perio_in_ep;
+}
+
+/**
+ * dwc2_hsotg_tx_fifo_total_depth - return total FIFO depth available for
+ * device mode TX FIFOs
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ */
+static int dwc2_tx_fifo_total_depth(struct dwc2 *dwc2)
+{
+ int addr;
+ int tx_addr_max;
+ u32 np_tx_fifo_size;
+
+ np_tx_fifo_size = min_t(u32, dwc2->hw_params.dev_nperio_tx_fifo_size,
+ dwc2->params.g_np_tx_fifo_size);
+
+ /* Get Endpoint Info Control block size in DWORDs. */
+ tx_addr_max = dwc2->hw_params.total_fifo_size;
+
+ addr = dwc2->params.g_rx_fifo_size + np_tx_fifo_size;
+
+ if (tx_addr_max <= addr)
+ return 0;
+
+ return tx_addr_max - addr;
+}
+
+static void dwc2_set_param_tx_fifo_sizes(struct dwc2 *dwc2)
+{
+ struct dwc2_core_params *p = &dwc2->params;
+ int count;
+ int depth;
+ int i;
+
+ count = dwc2_tx_fifo_count(dwc2);
+
+ depth = dwc2_tx_fifo_total_depth(dwc2);
+ if (count)
+ depth /= count;
+
+ memset(p->g_tx_fifo_size, 0, sizeof(p->g_tx_fifo_size));
+ for (i = 1; i <= count; i++)
+ p->g_tx_fifo_size[i] = depth;
+}
+
+static void dwc2_set_param_fifo_sizes(struct dwc2 *dwc2)
+{
+ struct dwc2_hw_params *hw = &dwc2->hw_params;
+ struct dwc2_core_params *p = &dwc2->params;
+ u32 total_fifo_size = dwc2->hw_params.total_fifo_size;
+ u32 max_np_tx_fifo_size = hw->dev_nperio_tx_fifo_size;
+ u32 max_rx_fifo_size = hw->rx_fifo_size;
+ int count;
+ int depth;
+ int i;
+
+ count = dwc2_tx_fifo_count(dwc2);
+
+ depth = (total_fifo_size & ~0x7f) / (count * 3 + 8);
+ p->g_rx_fifo_size = depth * count * 2;
+ p->g_np_tx_fifo_size = depth * 8;
+
+ for (i = 1; i <= count; i++)
+ p->g_tx_fifo_size[i] = depth;
+
+}
+
/**
* dwc2_set_default_params() - Set all core parameters to their
* auto-detected default values.
@@ -138,6 +219,11 @@ void dwc2_set_default_params(struct dwc2 *dwc2)
p->host_nperio_tx_fifo_size = hw->host_nperio_tx_fifo_size;
p->host_perio_tx_fifo_size = hw->host_perio_tx_fifo_size;
}
+
+ if ((dwc2->dr_mode == USB_DR_MODE_PERIPHERAL) ||
+ (dwc2->dr_mode == USB_DR_MODE_OTG)) {
+ dwc2_set_param_fifo_sizes(dwc2);
+ }
}
int dwc2_core_snpsid(struct dwc2 *dwc2)
--
2.21.0.196.g041f5ea
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-01-22 15:50 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-22 15:49 [RFC PATCH 0/9] usb: Add dwc2 gadget driver Jules Maselbas
2020-01-22 15:49 ` [RFC PATCH 1/9] BACKPORT: usb: Add helper to extract bits 12:11 of wMaxPacketize Jules Maselbas
2020-01-22 15:49 ` [RFC PATCH 2/9] BACKPORT: usb: ch9: make usb_endpoint_maxp() return only packet size Jules Maselbas
2020-01-22 15:49 ` [RFC PATCH 3/9] usb: Update uses of usb_endpoint_maxp Jules Maselbas
2020-01-22 15:49 ` [RFC PATCH 4/9] usb: dwc2: Add otg state Jules Maselbas
2020-01-22 15:49 ` [RFC PATCH 5/9] usb: dwc2: Add function to flush a tx fifo Jules Maselbas
2020-01-22 15:49 ` [RFC PATCH 6/9] usb: dwc2: Add structure for gadget driver Jules Maselbas
2020-01-22 15:49 ` [RFC PATCH 7/9] usb: dwc2: Add getter for gadget fifo hwparams Jules Maselbas
2020-01-22 15:49 ` Jules Maselbas [this message]
2020-01-22 15:49 ` [RFC PATCH 9/9] usb: dwc2: Add gadget driver Jules Maselbas
2020-01-27 13:40 ` Sascha Hauer
2020-01-27 17:18 ` Jules Maselbas
2020-01-28 8:18 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200122154950.22746-9-jmaselbas@kalray.eu \
--to=jmaselbas@kalray.eu \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox