From: "Uwe Kleine-König" <uwe@kleine-koenig.org>
To: barebox@lists.infradead.org
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Subject: [PATCH 1/2] gpiolib: reorder functions
Date: Mon, 27 Jan 2020 12:44:52 +0100 [thread overview]
Message-ID: <20200127114453.366-2-uwe@kleine-koenig.org> (raw)
In-Reply-To: <20200127114453.366-1-uwe@kleine-koenig.org>
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
gpio_request_one() and gpio_request_array() make use of
gpio_direction_*, so it is natural to define the former them further low
in the file. It doesn't matter for the compiler here as all functions
are declared in a header, but the next commit adds a few more functions
and it benefits from this reordering by not needing forward
declarations.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/gpio/gpiolib.c | 152 ++++++++++++++++++++---------------------
1 file changed, 76 insertions(+), 76 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9764ddf0f062..6789ffd218b8 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -145,82 +145,6 @@ void gpio_free(unsigned gpio)
gi->label = NULL;
}
-/**
- * gpio_request_one - request a single GPIO with initial configuration
- * @gpio: the GPIO number
- * @flags: GPIO configuration as specified by GPIOF_*
- * @label: a literal description string of this GPIO
- */
-int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
-{
- int err;
- struct gpio_info *gi = gpio_to_desc(gpio);
-
- /*
- * Not all of the flags below are mulit-bit, but, for the sake
- * of consistency, the code is written as if all of them were.
- */
- const bool active_low = (flags & GPIOF_ACTIVE_LOW) == GPIOF_ACTIVE_LOW;
- const bool dir_in = (flags & GPIOF_DIR_IN) == GPIOF_DIR_IN;
- const bool logical = (flags & GPIOF_LOGICAL) == GPIOF_LOGICAL;
- const bool init_active = (flags & GPIOF_INIT_ACTIVE) == GPIOF_INIT_ACTIVE;
- const bool init_high = (flags & GPIOF_INIT_HIGH) == GPIOF_INIT_HIGH;
-
- err = gpio_request(gpio, label);
- if (err)
- return err;
-
- gi->active_low = active_low;
-
- if (dir_in)
- err = gpio_direction_input(gpio);
- else if (logical)
- err = gpio_direction_active(gpio, init_active);
- else
- err = gpio_direction_output(gpio, init_high);
-
- if (err)
- gpio_free(gpio);
-
- return err;
-}
-EXPORT_SYMBOL_GPL(gpio_request_one);
-
-/**
- * gpio_request_array - request multiple GPIOs in a single call
- * @array: array of the 'struct gpio'
- * @num: how many GPIOs in the array
- */
-int gpio_request_array(const struct gpio *array, size_t num)
-{
- int i, err;
-
- for (i = 0; i < num; i++, array++) {
- err = gpio_request_one(array->gpio, array->flags, array->label);
- if (err)
- goto err_free;
- }
- return 0;
-
-err_free:
- while (i--)
- gpio_free((--array)->gpio);
- return err;
-}
-EXPORT_SYMBOL_GPL(gpio_request_array);
-
-/**
- * gpio_free_array - release multiple GPIOs in a single call
- * @array: array of the 'struct gpio'
- * @num: how many GPIOs in the array
- */
-void gpio_free_array(const struct gpio *array, size_t num)
-{
- while (num--)
- gpio_free((array++)->gpio);
-}
-EXPORT_SYMBOL_GPL(gpio_free_array);
-
void gpio_set_value(unsigned gpio, int value)
{
struct gpio_info *gi = gpio_to_desc(gpio);
@@ -324,6 +248,82 @@ int gpio_direction_input(unsigned gpio)
}
EXPORT_SYMBOL(gpio_direction_input);
+/**
+ * gpio_request_one - request a single GPIO with initial configuration
+ * @gpio: the GPIO number
+ * @flags: GPIO configuration as specified by GPIOF_*
+ * @label: a literal description string of this GPIO
+ */
+int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+{
+ int err;
+ struct gpio_info *gi = gpio_to_desc(gpio);
+
+ /*
+ * Not all of the flags below are mulit-bit, but, for the sake
+ * of consistency, the code is written as if all of them were.
+ */
+ const bool active_low = (flags & GPIOF_ACTIVE_LOW) == GPIOF_ACTIVE_LOW;
+ const bool dir_in = (flags & GPIOF_DIR_IN) == GPIOF_DIR_IN;
+ const bool logical = (flags & GPIOF_LOGICAL) == GPIOF_LOGICAL;
+ const bool init_active = (flags & GPIOF_INIT_ACTIVE) == GPIOF_INIT_ACTIVE;
+ const bool init_high = (flags & GPIOF_INIT_HIGH) == GPIOF_INIT_HIGH;
+
+ err = gpio_request(gpio, label);
+ if (err)
+ return err;
+
+ gi->active_low = active_low;
+
+ if (dir_in)
+ err = gpio_direction_input(gpio);
+ else if (logical)
+ err = gpio_direction_active(gpio, init_active);
+ else
+ err = gpio_direction_output(gpio, init_high);
+
+ if (err)
+ gpio_free(gpio);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(gpio_request_one);
+
+/**
+ * gpio_request_array - request multiple GPIOs in a single call
+ * @array: array of the 'struct gpio'
+ * @num: how many GPIOs in the array
+ */
+int gpio_request_array(const struct gpio *array, size_t num)
+{
+ int i, err;
+
+ for (i = 0; i < num; i++, array++) {
+ err = gpio_request_one(array->gpio, array->flags, array->label);
+ if (err)
+ goto err_free;
+ }
+ return 0;
+
+err_free:
+ while (i--)
+ gpio_free((--array)->gpio);
+ return err;
+}
+EXPORT_SYMBOL_GPL(gpio_request_array);
+
+/**
+ * gpio_free_array - release multiple GPIOs in a single call
+ * @array: array of the 'struct gpio'
+ * @num: how many GPIOs in the array
+ */
+void gpio_free_array(const struct gpio *array, size_t num)
+{
+ while (num--)
+ gpio_free((array++)->gpio);
+}
+EXPORT_SYMBOL_GPL(gpio_free_array);
+
static int gpiochip_find_base(int start, int ngpio)
{
int i;
--
2.24.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-01-27 11:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-27 11:44 [PATCH 0/2] gpiolib: minor optimization Uwe Kleine-König
2020-01-27 11:44 ` Uwe Kleine-König [this message]
2020-01-27 11:44 ` [PATCH 2/2] gpiolib: introduce helper functions working on gpio_info structs Uwe Kleine-König
2020-01-27 13:14 ` [PATCH 0/2] gpiolib: minor optimization Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200127114453.366-2-uwe@kleine-koenig.org \
--to=uwe@kleine-koenig.org \
--cc=barebox@lists.infradead.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox