From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1j3dvj-0003GA-PC for barebox@lists.infradead.org; Mon, 17 Feb 2020 10:47:13 +0000 Date: Mon, 17 Feb 2020 11:47:09 +0100 From: Sascha Hauer Message-ID: <20200217104709.pinrcr3uhiz43few@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: v2020.02.0 To: Barebox List Hi All, I just released barebox-2020.02.0. Nicest thing to note this time is that we finally have USB support on the Raspberry Pi boards and with it networking support, hurray ;) See below for the usual flow of patches that went into this release. Haev Fun! Sascha ---------------------------------------------------------------- Ahmad Fatoum (16): ARM: i.MX: introduce imx_image_rule variable for code deduplication ARM: i.MX: rebuild .imximg if DCD table in .imxcfg changes led: pca955x: remove ineffectual assignment commands: led: print actual error code when led_set fails ARM: cache_64: invalidate dcache in arm_early_mmu_cache_invalidate ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush Revert "clocksource: ARMv8 timer can only be built on ARMv8" net: designware: eqos: don't funnel all MDIO writes to register 0 mci: stm32_sdmmc2: use correct card power cycle sequence mci: stm32_sdmmc2: don't reset before retrying failed operations mci: core: don't test 4-bit-buswidth support if MMC host lacks capabi= lity mci: stm32_sdmmc2: compare ios ->bus_width with correct constants mci: stm32_sdmmc2: fix typo in debug string acpi: include missing header in hw_random: add support for STM32 RNG serial: ns16550_pci: fix possible read of uninitialized variable Albert Schwarzkopf (1): Allow usage of default environment without environment file storage Andrey Smirnov (1): ARM: aarch64: Add support for passing initrd to Linux Antony Pavlov (4): include/linux/amba/bus.h: drop unused declarations MIPS: dts: rename tplink-mr3020.dts -> ar9331_tl_mr3020.dts MIPS: actually use CONFIG_MIPS_RELOCATION_TABLE_SIZE RISC-V: unbreak built-in dtb Christian Eggers (1): doc: bootchooser: Fix barebox-state example Du Huanpeng (1): MIPS: loongson: rename CPU_LOONGSON1 to CPU_GS232 Hubert Feurstein (7): led: unify led trigger tables led: add documentation for net-tx and net-rx triggers led: check for 'barebox, default-trigger' when 'linux, default-trigge= r' is not found led: parse panic-indicator from device-tree commands: digest: don't be to restrictive with the length of verifica= tion files mci: imx-esdhc: fix termination of statement commands: miitool: handle powerdown-flag Lucas Stach (31): ARM: zynq: zedboard: split out PS7 init ARM: zynq: zedboard: allow lowlevel init to be called as second stage filetype: add Zynq image type ARM: zynq: add Zynq image bootm handler ARM: zii-imx8mq-dev: make eMMC update target the default clk: zynq: add QSPI reference clock spi: add Zynq QSPI controller driver ARM: zynq: add QSPI DT node ARM: zynq: zed: add QSPI flash support ARM64: entry: save/restore potentially clobbered registers ARM: zii-imx8mq-dev: add DT fixups ARM: zii-imx8mq-dev: fixup touchscreen and ethernet switch alias ARM: rdu-common: restart machine after fixing i210 device ID ARM: rdu2: don't reduce i2c frequency for eGalax touch ARM: rdu2: fixup touchscreen alias ARM: rdu1: add default environment ARM: nxp-imx8mq-evk: switch to SPDX license header ARM: nxp-imx8mq-evk: switch the PBL memcpy parameters to common varia= bles ARM: nxp-imx8mq-evk: clean up nxp_imx8mq_evk_start ARM: nxp-imx8mq-evk: fix bootflow comment ARM: zynq: add Zynq specific lowlevel CPU init function ARM: zynq: zed: use zynq_cpu_lowlevel_init() esdhc-pbl: allow to skip starting i.MX8 image ARM: nxp-imx8mq-evk: fix second stage booting esdhc-pbl: remove now unused imx8_esdhc_load_piggy ARM: zynq: zed: partially revert zynq_cpu_lowlevel_init() chnages serial: cadence: move register definitions into header file serial: cadence: add lowlevel init and putc functions ARM: zynq: zedboard: add PBL console support ARM: qemu-virt64: convert to assembly entry ARM: imx6: properly check for IPU presence Maik Otto (1): habv4: imx change signing area from full to the executed image Michael Tretter (1): firmware: zynqmp-fpga: drop example bin format header Oleksij Rempel (1): MIPS: don't overlay relocation data with BSS Roland Hieber (1): of: demote most debug output to loglevel 8 (vdebug) Ruslan V. Sushko (1): RDU2: add support to boot from SD card autonomously Sascha Hauer (39): dts: update to v5.4 dts: update to v5.5-rc1 dts: update to v5.5-rc2 ARM: rpi: Do not warn when firmware doesn't pass a dtb usb: Make timeout unit clear of: Add of_bus_n_xxx_cells() device: Introduce dma_offset of: Read dma_offset from device tree usb: Add usbroothubdes.h regulator: add function to get regulator by its name rpi: Enable USB Power domain during startup usb: Forward error code from usb_set_configuration usb: Add dwc2 host driver dts: update to v5.5-rc3 ARM: bcm2835 mbox: Remove response valid check gpio: Add raspberrypi exp gpio driver ARM: bcm2835 mbox: use pr_* to print messages ARM: rpi_defconfig: Enable raspberry GPIO exp driver ARM: rpi mailbox: Use non interruptible timeout ARM: rpi_defconfig: Enable more features images: gitignore more files ARM: Layerscape: replace overcomplicated macros include/soc/fsl: remove unused function prototypes include/soc/fsl: Make struct ccsr_qman v3 specific net: fsl-fman: Do not put hardware in reset before Linux start ARM: Layerscape: setup icids for the IOMMU PCI: layerscape: rename variable PCI: layerscape: Fixup iommu-map properties dts: update to v5.5-rc5 dts: update to v5.5-rc6 Merge branch 'for-next/arm' Merge branch 'for-next/dts' Merge branch 'for-next/imx' Merge branch 'for-next/layerscape' Merge branch 'for-next/led' Merge branch 'for-next/misc' Merge branch 'for-next/rpi' Merge branch 'for-next/zynq' Release v2020.02.0 Stefan Riedmueller (7): ARM: dts: imx6: pcaaxl3: Order nodes alphabetically ARM: dts: imx6: pcaaxl3: Update license and model description ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard ARM: dts: imx6: phycard: Make eeprom configurable ARM: dts: imx6: phycard: Switch to new partitions binding ARM: dts: imx6: phycard: Use gpio binding constants ARM: dts: imx6: phytec: Increase NAND barebox partition size Ulrich =D6lmann (1): mtd: spi-nor: Add support for en25qh64 -- = Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox