From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jACZR-0005rc-6P for barebox@lists.infradead.org; Fri, 06 Mar 2020 12:59:18 +0000 Date: Fri, 6 Mar 2020 13:59:12 +0100 From: Sascha Hauer Message-ID: <20200306125912.GY3335@pengutronix.de> References: <2105504494.1423.1583396775377@mail.vodafone.de> <4b929efa-4d1b-5641-743d-96d94766c57d@pengutronix.de> <1062353935.2358.1583401816499@mail.vodafone.de> <1104087736.13112.1583489476516@mail.vodafone.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1104087736.13112.1583489476516@mail.vodafone.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: barebox image for an spi flash (like m25p0) on an imx7 soc To: Giorgio Dal Molin Cc: barebox@lists.infradead.org, Ahmad Fatoum On Fri, Mar 06, 2020 at 11:11:16AM +0100, Giorgio Dal Molin wrote: > Hi, > > I think I've found an error in the imx7 ref. manual: the table at 6.6.6.3 'QuadSPI > configuration parameters' should be placed at offset 0x00 (the very beginning of the > spi flash) and not at offset 0x400 as it is written on the ref. manual !!! This seems to be specific to QuadSPI. Are you sure you boot from the QuadSPI controller? There is a driver for that in barebox, but the i.MX7 dts files do not register it. Given that you have written the image with barebox I doubt you are doing QuadSPI. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox