mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset
@ 2020-03-10  8:03 Ahmad Fatoum
  2020-03-10  8:03 ` [PATCH v2 2/4] ARM: at91: sama5d27-som1: clean up lowlevel.c Ahmad Fatoum
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Ahmad Fatoum @ 2020-03-10  8:03 UTC (permalink / raw)
  To: barebox; +Cc: Sam Ravnborg, Ahmad Fatoum

System reset wasn't supported on the sama5 so far.
Add a driver to remedy this.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2:
  * s/_/-/ in reset name to be consistent with driver name (Sam)
  * return restart_handler_register(...) in probe instead of separate
    return 0 after the register
  
---
 arch/arm/mach-at91/Kconfig    |  5 +++
 arch/arm/mach-at91/Makefile   |  1 +
 arch/arm/mach-at91/sam9_rst.c | 72 +++++++++++++++++++++++++++++++++++
 3 files changed, 78 insertions(+)
 create mode 100644 arch/arm/mach-at91/sam9_rst.c

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5267102bf94e..0eb5410664bb 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -41,12 +41,16 @@ config AT91SAM926X_BOARD_INIT
 config AT91SAM9_SMC
 	bool
 
+config HAVE_AT91SAM9_RST
+	bool
+
 config SOC_AT91SAM9
 	bool
 	select CPU_ARM926T
 	select AT91SAM9_SMC
 	select CLOCKSOURCE_ATMEL_PIT
 	select PINCTRL
+	select HAVE_AT91SAM9_RST
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_UTMI
@@ -54,6 +58,7 @@ config SOC_AT91SAM9
 
 config SOC_SAMA5
 	bool
+	select HAVE_AT91SAM9_RST
 	select CPU_V7
 
 config SOC_SAMA5D2
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 66d0b700f61e..89aff54b8af7 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-y += at91sam9_reset.o
 obj-y += at91sam9g45_reset.o
 
 obj-$(CONFIG_AT91SAM9_SMC) += sam9_smc.o
+obj-$(CONFIG_HAVE_AT91SAM9_RST) += at91sam9_rst.o
 
 # CPU-specific support
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
diff --git a/arch/arm/mach-at91/sam9_rst.c b/arch/arm/mach-at91/sam9_rst.c
new file mode 100644
index 000000000000..8f03576e698f
--- /dev/null
+++ b/arch/arm/mach-at91/sam9_rst.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Pengutronix, Ahmad Fatoum <a.fatoum@pengutronix.de>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <restart.h>
+#include <linux/clk.h>
+#include <mach/at91_rstc.h>
+
+struct at91sam9x_rst {
+	struct restart_handler restart;
+	void __iomem *base;
+};
+
+static void __noreturn at91sam9x_restart_soc(struct restart_handler *rst)
+{
+	struct at91sam9x_rst *priv = container_of(rst, struct at91sam9x_rst, restart);
+
+	writel(AT91_RSTC_PROCRST
+	       | AT91_RSTC_PERRST
+	       | AT91_RSTC_EXTRST
+	       | AT91_RSTC_KEY,
+	       priv->base + AT91_RSTC_CR);
+
+	hang();
+}
+
+static int at91sam9x_rst_probe(struct device_d *dev)
+{
+	struct at91sam9x_rst *priv;
+	struct resource *iores;
+	struct clk *clk;
+
+	iores = dev_request_mem_resource(dev, 0);
+	if (IS_ERR(iores)) {
+		dev_err(dev, "could not get reset memory region\n");
+		return PTR_ERR(iores);
+	}
+
+	priv = xzalloc(sizeof(*priv));
+	priv->base = IOMEM(iores->start);
+
+	clk = clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		release_region(iores);
+		free(priv);
+		return PTR_ERR(clk);
+	}
+
+	clk_enable(clk);
+
+	priv->restart.name = "at91sam9x-rst";
+	priv->restart.restart = at91sam9x_restart_soc;
+
+	return restart_handler_register(&priv->restart);
+}
+
+static const __maybe_unused struct of_device_id at91sam9x_rst_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g45-rstc", },
+	{ .compatible = "atmel,sama5d3-rstc", },
+	{ /* sentinel */ },
+};
+
+static struct driver_d at91sam9x_rst_driver = {
+	.name		= "at91sam9x-rst",
+	.of_compatible	= DRV_OF_COMPAT(at91sam9x_rst_dt_ids),
+	.probe		= at91sam9x_rst_probe,
+};
+device_platform_driver(at91sam9x_rst_driver);
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 2/4] ARM: at91: sama5d27-som1: clean up lowlevel.c
  2020-03-10  8:03 [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset Ahmad Fatoum
@ 2020-03-10  8:03 ` Ahmad Fatoum
  2020-03-10  8:03 ` [PATCH v2 3/4] ARM: at91: sama5d27-som1: branch to noinline function after stack setup Ahmad Fatoum
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Ahmad Fatoum @ 2020-03-10  8:03 UTC (permalink / raw)
  To: barebox; +Cc: Ahmad Fatoum

In ARM, stack decrements before storing values, so decrementing a number
from the stack base is unnecessary. Existing instances of this were
removed in 6b3dc4abd8 ("ARM: Cleanup stack offset cargo cult"), but the
sama5d27-som1 board was added later than that. Fix the cargo cult here
as well and while at it, turn a macro that doesn't need to be one
into a static inline function.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2:
  * New patch for issues raised by Sam against the giant board
    lowlevel.c
---
 arch/arm/boards/sama5d27-som1/lowlevel.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boards/sama5d27-som1/lowlevel.c b/arch/arm/boards/sama5d27-som1/lowlevel.c
index 7df5a4772d0b..6907dcf812b5 100644
--- a/arch/arm/boards/sama5d27-som1/lowlevel.c
+++ b/arch/arm/boards/sama5d27-som1/lowlevel.c
@@ -22,8 +22,10 @@
 /* PCK = 492MHz, MCK = 164MHz */
 #define MASTER_CLOCK	164000000
 
-#define sama5d2_pmc_enable_periph_clock(clk) \
-	at91_pmc_sam9x5_enable_periph_clock(IOMEM(SAMA5D2_BASE_PMC), clk)
+static inline void sama5d2_pmc_enable_periph_clock(int clk)
+{
+	at91_pmc_sam9x5_enable_periph_clock(IOMEM(SAMA5D2_BASE_PMC), clk);
+}
 
 static void ek_turn_led(unsigned color)
 {
@@ -69,7 +71,7 @@ ENTRY_FUNCTION(start_sama5d27_som1_ek, r0, r1, r2)
 
 	arm_cpu_lowlevel_init();
 
-	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE - 16);
+	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE);
 
 	if (IS_ENABLED(CONFIG_DEBUG_LL))
 		ek_dbgu_init();
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 3/4] ARM: at91: sama5d27-som1: branch to noinline function after stack setup
  2020-03-10  8:03 [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset Ahmad Fatoum
  2020-03-10  8:03 ` [PATCH v2 2/4] ARM: at91: sama5d27-som1: clean up lowlevel.c Ahmad Fatoum
@ 2020-03-10  8:03 ` Ahmad Fatoum
  2020-03-10  8:03 ` [PATCH v2 4/4] ARM: at91: add sama5d27-based Groboards Giant Board support Ahmad Fatoum
  2020-03-11 15:07 ` [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset Sascha Hauer
  3 siblings, 0 replies; 5+ messages in thread
From: Ahmad Fatoum @ 2020-03-10  8:03 UTC (permalink / raw)
  To: barebox; +Cc: Ahmad Fatoum

We need to branch out as soon as possible after setting up the stack.
Do this and thereby avoid an access violation we now run into using
OSELAS.Toolchain-2019.09.1.

Fixes: 8bfb1852cf6a ("ARM: at91: add basic sama5d2-som1-ek1 support")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2:
  * New patch. I observe a wrong value in the stack pointer when
    ek_turn_led is inlined.
---
 arch/arm/boards/sama5d27-som1/lowlevel.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boards/sama5d27-som1/lowlevel.c b/arch/arm/boards/sama5d27-som1/lowlevel.c
index 6907dcf812b5..62d35be9123d 100644
--- a/arch/arm/boards/sama5d27-som1/lowlevel.c
+++ b/arch/arm/boards/sama5d27-som1/lowlevel.c
@@ -65,14 +65,10 @@ static void ek_dbgu_init(void)
 
 extern char __dtb_z_at91_sama5d27_som1_ek_start[];
 
-ENTRY_FUNCTION(start_sama5d27_som1_ek, r0, r1, r2)
+static noinline void som1_entry(void)
 {
 	void *fdt;
 
-	arm_cpu_lowlevel_init();
-
-	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE);
-
 	if (IS_ENABLED(CONFIG_DEBUG_LL))
 		ek_dbgu_init();
 
@@ -81,3 +77,12 @@ ENTRY_FUNCTION(start_sama5d27_som1_ek, r0, r1, r2)
 	ek_turn_led(RGB_LED_GREEN);
 	barebox_arm_entry(SAMA5_DDRCS, SZ_128M, fdt);
 }
+
+ENTRY_FUNCTION(start_sama5d27_som1_ek, r0, r1, r2)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE);
+
+	som1_entry();
+}
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v2 4/4] ARM: at91: add sama5d27-based Groboards Giant Board support
  2020-03-10  8:03 [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset Ahmad Fatoum
  2020-03-10  8:03 ` [PATCH v2 2/4] ARM: at91: sama5d27-som1: clean up lowlevel.c Ahmad Fatoum
  2020-03-10  8:03 ` [PATCH v2 3/4] ARM: at91: sama5d27-som1: branch to noinline function after stack setup Ahmad Fatoum
@ 2020-03-10  8:03 ` Ahmad Fatoum
  2020-03-11 15:07 ` [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset Sascha Hauer
  3 siblings, 0 replies; 5+ messages in thread
From: Ahmad Fatoum @ 2020-03-10  8:03 UTC (permalink / raw)
  To: barebox; +Cc: Sam Ravnborg, Ahmad Fatoum

The Groboards Giant Board is a ATSAMA5D27C-D1G SiP-based SBC.
The board features a 500MHz ARM Cortex-A5 and 128MB DDR2 SDRAM in the
SiP as well as a MicroSD slot on the PCB.

barebox doesn't yet support the sama5d2 SDHCI-variant, so board support
is limited to toggling the LED and interfacing with the UART, but add
this now till the rest may follow. Device tree is based on the vendor's
device-tree available at https://github.com/Groboards/giantboard-tools

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2:
  * change macro that doesn't need to be one to function (Sam)
  * remove arm_setup_stack(base - offset) cargo cult (Sam)
---
 arch/arm/boards/Makefile                      |   1 +
 arch/arm/boards/sama5d27-giantboard/Makefile  |   1 +
 .../arm/boards/sama5d27-giantboard/lowlevel.c |  63 ++++
 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/at91-sama5d27_giantboard.dts     | 299 ++++++++++++++++++
 arch/arm/mach-at91/Kconfig                    |   8 +
 images/Makefile.at91                          |   4 +
 7 files changed, 377 insertions(+)
 create mode 100644 arch/arm/boards/sama5d27-giantboard/Makefile
 create mode 100644 arch/arm/boards/sama5d27-giantboard/lowlevel.c
 create mode 100644 arch/arm/dts/at91-sama5d27_giantboard.dts

diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 14538af53bf6..9fe458e0a390 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -113,6 +113,7 @@ obj-$(CONFIG_MACH_RPI_COMMON)			+= raspberry-pi/
 obj-$(CONFIG_MACH_SABRELITE)			+= freescale-mx6-sabrelite/
 obj-$(CONFIG_MACH_SABRESD)			+= freescale-mx6-sabresd/
 obj-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB)	+= freescale-mx6sx-sabresdb/
+obj-$(CONFIG_MACH_SAMA5D27_GIANTBOARD)		+= sama5d27-giantboard/
 obj-$(CONFIG_MACH_SAMA5D27_SOM1)		+= sama5d27-som1/
 obj-$(CONFIG_MACH_SAMA5D3XEK)			+= sama5d3xek/
 obj-$(CONFIG_MACH_SAMA5D3_XPLAINED)		+= sama5d3_xplained/
diff --git a/arch/arm/boards/sama5d27-giantboard/Makefile b/arch/arm/boards/sama5d27-giantboard/Makefile
new file mode 100644
index 000000000000..b08c4a93ca27
--- /dev/null
+++ b/arch/arm/boards/sama5d27-giantboard/Makefile
@@ -0,0 +1 @@
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/sama5d27-giantboard/lowlevel.c b/arch/arm/boards/sama5d27-giantboard/lowlevel.c
new file mode 100644
index 000000000000..0236c424c195
--- /dev/null
+++ b/arch/arm/boards/sama5d27-giantboard/lowlevel.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 Ahmad Fatoum, Pengutronix
+ */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+#include <mach/at91_pmc_ll.h>
+
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <debug_ll.h>
+#include <mach/at91_dbgu.h>
+
+/* PCK = 492MHz, MCK = 164MHz */
+#define MASTER_CLOCK	164000000
+
+static inline void sama5d2_pmc_enable_periph_clock(int clk)
+{
+	at91_pmc_sam9x5_enable_periph_clock(IOMEM(SAMA5D2_BASE_PMC), clk);
+}
+
+static void dbgu_init(void)
+{
+	unsigned mck = MASTER_CLOCK / 2;
+
+	sama5d2_pmc_enable_periph_clock(SAMA5D2_ID_PIOD);
+
+	at91_mux_pio4_set_A_periph(IOMEM(SAMA5D2_BASE_PIOD),
+				   pin_to_mask(AT91_PIN_PD3)); /* DBGU TXD */
+
+	sama5d2_pmc_enable_periph_clock(SAMA5D2_ID_UART1);
+
+	at91_dbgu_setup_ll(IOMEM(SAMA5D2_BASE_UART1), mck, 115200);
+
+	putc_ll('>');
+}
+
+extern char __dtb_z_at91_sama5d27_giantboard_start[];
+
+static noinline void giantboard_entry(void)
+{
+	void *fdt;
+
+	if (IS_ENABLED(CONFIG_DEBUG_LL))
+		dbgu_init();
+
+	fdt = __dtb_z_at91_sama5d27_giantboard_start + get_runtime_offset();
+
+	barebox_arm_entry(SAMA5_DDRCS, SZ_128M, fdt);
+}
+
+ENTRY_FUNCTION(start_sama5d27_giantboard, r0, r1, r2)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE);
+
+	giantboard_entry();
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b1c9a2c7903f..ddfe64e83bdf 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -138,6 +138,7 @@ lwl-dtb-$(CONFIG_MACH_ZII_VF610_DEV) += \
 lwl-dtb-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
 lwl-dtb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
 lwl-dtb-$(CONFIG_MACH_SAMA5D27_SOM1) += at91-sama5d27_som1_ek.dtb.o
+lwl-dtb-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += at91-sama5d27_giantboard.dtb.o
 lwl-dtb-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek.dtb.o
 lwl-dtb-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o
 
diff --git a/arch/arm/dts/at91-sama5d27_giantboard.dts b/arch/arm/dts/at91-sama5d27_giantboard.dts
new file mode 100644
index 000000000000..940379e43005
--- /dev/null
+++ b/arch/arm/dts/at91-sama5d27_giantboard.dts
@@ -0,0 +1,299 @@
+// SPDX-License-Identifer: GPL-2.0-or-later OR X11
+/*
+ * at91-sama5d27_giantboard.dts - Device Tree file for SAMA5D27 Giant Board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ *                2019 Ahmad Fatoum <a.fatoum@pengutronix.de>
+ */
+
+/dts-v1/;
+
+#include <arm/sama5d2.dtsi>
+#include <arm/sama5d2-pinfunc.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+/ {
+	model = "Giant Board";
+	compatible = "groboards,sama5d27-giantboard", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		orange {
+			label = "orange";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	dmas = <0>, <0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	dmas = <0>, <0>;
+	i2c-sda-hold-time-ns = <350>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "active-semi,act8945a";
+		reg = <0x5b>;
+		active-semi,vsel-low;
+
+		regulators {
+			vdd_1v8_reg: REG_DCDC1 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-min-microvolt=<1850000>;
+					regulator-suspend-max-microvolt=<1850000>;
+					regulator-changeable-in-suspend;
+					regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				};
+			};
+
+			vdd_1v2_reg: REG_DCDC2 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_3v3_reg: REG_DCDC3 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_fuse_reg: REG_LDO1 {
+				regulator-name = "VDD_FUSE";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_3v3_lp_reg: REG_LDO2 {
+				regulator-name = "VDD_3V3_LP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_led_reg: REG_LDO3 {
+				regulator-name = "VDD_LED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_sdhc_1v8_reg: REG_LDO4 {
+				regulator-name = "VDD_SDHC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		charger {
+			compatible = "active-semi,act8945a-charger";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+			interrupt-parent = <&pioA>;
+			interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
+
+			active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+			active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+			active-semi,input-voltage-threshold-microvolt = <6600>;
+			active-semi,precondition-timeout = <40>;
+			active-semi,total-timeout = <3>;
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3_reg>;
+	vref-supply = <&vdd_3v3_reg>;
+	status = "disabled";
+};
+
+&pioA {
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PB31__TWD0>,
+			 <PIN_PC0__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD4__TWD1>,
+			 <PIN_PD5__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PA28__SDMMC1_CMD>,
+				 <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-pull-up;
+		};
+
+		conf-ck_cd {
+			pinmux = <PIN_PA22__SDMMC1_CK>,
+			<PIN_PA30__SDMMC1_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_spi0_default: spi0_default {
+		pinmux = <PIN_PA14__SPI0_SPCK>,
+			 <PIN_PA15__SPI0_MOSI>,
+			 <PIN_PA16__SPI0_MISO>;
+		bias-disable;
+	};
+
+	pinctrl_uart1_default: uart1_default {
+		pinmux = <PIN_PD2__URXD1>,
+			 <PIN_PD3__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_charger_chglev: charger_chglev {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_charger_irq: charger_irq {
+		pinmux = <PIN_PB13__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_charger_lbo: charger_lbo {
+		pinmux = <PIN_PC8__GPIO>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0eb5410664bb..eb14cd2c28da 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -587,6 +587,14 @@ config MACH_SAMA5D27_SOM1
 	help
 	  Select this if you are using Microchip's sama5d27 SoM evaluation kit
 
+config MACH_SAMA5D27_GIANTBOARD
+	bool "Groboards SAMA5D27 Giant Board"
+	select SOC_SAMA5D2
+	select OFDEVICE
+	select COMMON_CLK_OF_PROVIDER
+	help
+	  Select this if you are using the Groboards sama5d27 Giantboard
+
 endif
 
 comment "AT91 Board Options"
diff --git a/images/Makefile.at91 b/images/Makefile.at91
index f321bdec3696..448d71fb981d 100644
--- a/images/Makefile.at91
+++ b/images/Makefile.at91
@@ -17,3 +17,7 @@ image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb.img
 pblb-$(CONFIG_MACH_SAMA5D27_SOM1) += start_sama5d27_som1_ek
 FILE_barebox-sama5d27-som1-ek.img = start_sama5d27_som1_ek.pblb
 image-$(CONFIG_MACH_SAMA5D27_SOM1) += barebox-sama5d27-som1-ek.img
+
+pblb-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += start_sama5d27_giantboard
+FILE_barebox-groboards-sama5d27-giantboard.img = start_sama5d27_giantboard.pblb
+image-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += barebox-groboards-sama5d27-giantboard.img
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset
  2020-03-10  8:03 [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset Ahmad Fatoum
                   ` (2 preceding siblings ...)
  2020-03-10  8:03 ` [PATCH v2 4/4] ARM: at91: add sama5d27-based Groboards Giant Board support Ahmad Fatoum
@ 2020-03-11 15:07 ` Sascha Hauer
  3 siblings, 0 replies; 5+ messages in thread
From: Sascha Hauer @ 2020-03-11 15:07 UTC (permalink / raw)
  To: Ahmad Fatoum; +Cc: barebox, Sam Ravnborg

On Tue, Mar 10, 2020 at 09:03:23AM +0100, Ahmad Fatoum wrote:
> System reset wasn't supported on the sama5 so far.
> Add a driver to remedy this.
> 
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> v1 -> v2:
>   * s/_/-/ in reset name to be consistent with driver name (Sam)
>   * return restart_handler_register(...) in probe instead of separate
>     return 0 after the register
>   

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2020-03-11 15:07 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-10  8:03 [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset Ahmad Fatoum
2020-03-10  8:03 ` [PATCH v2 2/4] ARM: at91: sama5d27-som1: clean up lowlevel.c Ahmad Fatoum
2020-03-10  8:03 ` [PATCH v2 3/4] ARM: at91: sama5d27-som1: branch to noinline function after stack setup Ahmad Fatoum
2020-03-10  8:03 ` [PATCH v2 4/4] ARM: at91: add sama5d27-based Groboards Giant Board support Ahmad Fatoum
2020-03-11 15:07 ` [PATCH v2 1/4] ARM: at91: add support for SAM9 SoC reset Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox