From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 23/24] usb: host: remove xhci driver
Date: Wed, 25 Mar 2020 13:31:10 +0100 [thread overview]
Message-ID: <20200325123111.9612-24-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200325123111.9612-1-s.hauer@pengutronix.de>
The current xhci driver support USB 2.0 only. The U-Boot driver is better
developed and supports USB 3.0 devices. Remove the xhci driver first as
a separate patch to make the patch adding the new U-Boot based driver
better readable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/usb/host/xhci-hcd.c | 1675 -----------------------------------
drivers/usb/host/xhci-hub.c | 646 --------------
drivers/usb/host/xhci-pci.c | 40 -
drivers/usb/host/xhci.h | 1282 ---------------------------
4 files changed, 3643 deletions(-)
delete mode 100644 drivers/usb/host/xhci-hcd.c
delete mode 100644 drivers/usb/host/xhci-hub.c
delete mode 100644 drivers/usb/host/xhci-pci.c
delete mode 100644 drivers/usb/host/xhci.h
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
deleted file mode 100644
index 32a6ccd5cd..0000000000
--- a/drivers/usb/host/xhci-hcd.c
+++ /dev/null
@@ -1,1675 +0,0 @@
-/*
- * xHCI HCD driver
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * Some code borrowed from the Linux xHCI driver
- * Author: Sarah Sharp
- * Copyright (C) 2008 Intel Corp.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-//#define DEBUG
-#include <clock.h>
-#include <common.h>
-#include <dma.h>
-#include <init.h>
-#include <io.h>
-#include <linux/err.h>
-#include <usb/usb.h>
-#include <usb/xhci.h>
-
-#include "xhci.h"
-
-
-static struct xhci_input_control_ctx *
-xhci_get_input_control_ctx(struct xhci_container_ctx *ctx)
-{
- if (ctx->type != XHCI_CTX_TYPE_INPUT)
- return NULL;
-
- return (struct xhci_input_control_ctx *)ctx->bytes;
-}
-
-static struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
- struct xhci_container_ctx *ctx)
-{
- if (ctx->type == XHCI_CTX_TYPE_DEVICE)
- return (struct xhci_slot_ctx *)ctx->bytes;
-
- return (struct xhci_slot_ctx *)
- (ctx->bytes + HCC_CTX_SIZE(xhci->hcc_params));
-}
-
-static struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
- struct xhci_container_ctx *ctx,
- unsigned int ep_index)
-{
- /* increment ep index by offset of start of ep ctx array */
- ep_index++;
- if (ctx->type == XHCI_CTX_TYPE_INPUT)
- ep_index++;
-
- return (struct xhci_ep_ctx *)
- (ctx->bytes + (ep_index * HCC_CTX_SIZE(xhci->hcc_params)));
-}
-
-/*
- * xHCI ring handling
- */
-
-static int xhci_ring_is_last_trb(struct xhci_ring *ring, union xhci_trb *trb)
-{
- if (ring->type == TYPE_EVENT)
- return trb == &ring->trbs[NUM_EVENT_TRBS];
- else
- return TRB_TYPE_LINK(le32_to_cpu(trb->link.control));
-}
-
-static int xhci_ring_increment(struct xhci_ring *ring, bool enqueue)
-{
- union xhci_trb **queue = (enqueue) ? &ring->enqueue : &ring->dequeue;
-
- (*queue)++;
-
- if (!xhci_ring_is_last_trb(ring, *queue))
- return 0;
-
- if (ring->type == TYPE_EVENT) {
- *queue = &ring->trbs[0];
- ring->cycle_state ^= 1;
- } else {
- u32 ctrl = le32_to_cpu((*queue)->link.control);
- void *p = (void *)(dma_addr_t)
- le64_to_cpu((*queue)->link.segment_ptr);
-
- ctrl = (ctrl & ~TRB_CYCLE) | ring->cycle_state;
- (*queue)->link.control = cpu_to_le32(ctrl);
-
- if (enqueue)
- ring->enqueue = p;
- else
- ring->dequeue = p;
-
- if (ctrl & LINK_TOGGLE)
- ring->cycle_state ^= 1;
- }
-
- return 0;
-}
-
-static int xhci_ring_issue_trb(struct xhci_ring *ring, union xhci_trb *trb)
-{
- union xhci_trb *enq = ring->enqueue;
- int i;
-
- /* Pass TRB to hardware */
- trb->generic.field[3] &= ~TRB_CYCLE;
- trb->generic.field[3] |= ring->cycle_state;
- for (i = 0; i < 4; i++)
- enq->generic.field[i] = cpu_to_le32(trb->generic.field[i]);
-
- xhci_ring_increment(ring, 1);
-
- return 0;
-}
-
-static void xhci_ring_init(struct xhci_ring *ring, int num_trbs,
- enum xhci_ring_type type)
-{
- ring->type = type;
- ring->cycle_state = 1;
- ring->num_trbs = num_trbs;
- ring->enqueue = ring->dequeue = &ring->trbs[0];
-
- /* Event ring is not linked */
- if (type == TYPE_EVENT)
- return;
-
- ring->trbs[num_trbs-1].link.segment_ptr =
- cpu_to_le64((dma_addr_t)&ring->trbs[0]);
- ring->trbs[num_trbs-1].link.control =
- cpu_to_le32(TRB_TYPE(TRB_LINK) | LINK_TOGGLE);
-}
-
-static struct xhci_ring *xhci_get_endpoint_ring(struct xhci_hcd *xhci)
-{
- struct xhci_ring *ring;
-
- if (list_empty(&xhci->rings_list)) {
- dev_err(xhci->dev, "no more endpoint rings available\n");
- return NULL;
- }
-
- ring = list_last_entry(&xhci->rings_list, struct xhci_ring, list);
- list_del_init(&ring->list);
-
- return ring;
-}
-
-static void xhci_put_endpoint_ring(struct xhci_hcd *xhci, struct xhci_ring *ring)
-{
- if (!ring)
- return;
-
- memset(ring->trbs, 0, ring->num_trbs * sizeof(union xhci_trb));
- list_add_tail(&ring->list, &xhci->rings_list);
-}
-
-/*
- * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the
- * core and HCDs. Find the index for an endpoint given its descriptor.
- * Use the return value to right shift 1 for the bitmask.
- *
- * Index = (epnum * 2) + direction - 1,
- * where direction = 0 for OUT, 1 for IN.
- * For control endpoints, the IN index is used (OUT index is unused), so
- * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
- */
-static unsigned int xhci_get_endpoint_index(u8 epaddress, u8 epattributes)
-{
- u8 epnum = epaddress & USB_ENDPOINT_NUMBER_MASK;
- u8 xfer = epattributes & USB_ENDPOINT_XFERTYPE_MASK;
- unsigned int index;
-
- if (xfer == USB_ENDPOINT_XFER_CONTROL)
- index = (unsigned int)(epnum * 2);
- else
- index = (unsigned int)(epnum * 2) +
- ((epaddress & USB_DIR_IN) ? 1 : 0) - 1;
-
- return index;
-}
-
-static u8 xhci_get_endpoint_type(u8 epaddress, u8 epattributes)
-{
- int in = epaddress & USB_ENDPOINT_DIR_MASK;
- u8 xfer = epattributes & USB_ENDPOINT_XFERTYPE_MASK;
- u8 type;
-
- switch (xfer) {
- case USB_ENDPOINT_XFER_CONTROL:
- type = CTRL_EP;
- break;
- case USB_ENDPOINT_XFER_ISOC:
- type = (in) ? ISOC_IN_EP : ISOC_OUT_EP;
- break;
- case USB_ENDPOINT_XFER_BULK:
- type = (in) ? BULK_IN_EP : BULK_OUT_EP;
- break;
- case USB_ENDPOINT_XFER_INT:
- type = (in) ? INT_IN_EP : INT_OUT_EP;
- break;
- }
-
- return type;
-}
-
-/*
- * Convert interval expressed as 2^(bInterval - 1) == interval into
- * straight exponent value 2^n == interval.
- *
- */
-static u32 xhci_parse_exponent_interval(struct usb_device *udev,
- struct usb_endpoint_descriptor *ep)
-{
- u32 interval;
-
- interval = clamp_val(ep->bInterval, 1, 16) - 1;
- /*
- * Full speed isoc endpoints specify interval in frames,
- * not microframes. We are using microframes everywhere,
- * so adjust accordingly.
- */
- if (udev->speed == USB_SPEED_FULL)
- interval += 3; /* 1 frame = 2^3 uframes */
-
- return interval;
-}
-
-/*
- * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
- * microframes, rounded down to nearest power of 2.
- */
-static u32 xhci_microframes_to_exponent(struct usb_device *udev,
- struct usb_endpoint_descriptor *ep, u32 desc_interval,
- u32 min_exponent, u32 max_exponent)
-{
- u32 interval;
-
- interval = fls(desc_interval) - 1;
- return clamp_val(interval, min_exponent, max_exponent);
-}
-
-static inline u32 xhci_parse_microframe_interval(struct usb_device *udev,
- struct usb_endpoint_descriptor *ep)
-{
- if (ep->bInterval == 0)
- return 0;
- return xhci_microframes_to_exponent(udev, ep, ep->bInterval, 0, 15);
-}
-
-
-static inline u32 xhci_parse_frame_interval(struct usb_device *udev,
- struct usb_endpoint_descriptor *ep)
-{
- return xhci_microframes_to_exponent(udev, ep, ep->bInterval * 8, 3, 10);
-}
-
-static u32 xhci_get_endpoint_interval(struct usb_device *udev,
- struct usb_endpoint_descriptor *ep)
-{
- u8 type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
- u32 interval = 0;
-
- switch (udev->speed) {
- case USB_SPEED_HIGH:
- /* Max NAK rate */
- if (type == USB_ENDPOINT_XFER_CONTROL ||
- type == USB_ENDPOINT_XFER_BULK) {
- interval = xhci_parse_microframe_interval(udev, ep);
- break;
- }
- /* Fall through - SS and HS isoc/int have same decoding */
- case USB_SPEED_SUPER:
- if (type == USB_ENDPOINT_XFER_ISOC ||
- type == USB_ENDPOINT_XFER_INT)
- interval = xhci_parse_exponent_interval(udev, ep);
- break;
- case USB_SPEED_FULL:
- if (type == USB_ENDPOINT_XFER_ISOC) {
- interval = xhci_parse_exponent_interval(udev, ep);
- break;
- }
- /*
- * Fall through for interrupt endpoint interval decoding
- * since it uses the same rules as low speed interrupt
- * endpoints.
- */
- case USB_SPEED_LOW:
- if (type == USB_ENDPOINT_XFER_ISOC ||
- type == USB_ENDPOINT_XFER_INT)
- interval = xhci_parse_frame_interval(udev, ep);
- break;
- }
-
- return interval;
-}
-
-/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
- * High speed endpoint descriptors can define "the number of additional
- * transaction opportunities per microframe", but that goes in the Max Burst
- * endpoint context field.
- */
-static u32 xhci_get_endpoint_mult(struct usb_device *udev,
- struct usb_endpoint_descriptor *ep)
-{
- u8 type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-
- if (udev->speed != USB_SPEED_SUPER || type != USB_ENDPOINT_XFER_ISOC)
- return 0;
- /* FIXME: return ss_ep_comp_descriptor.bmAttributes */
- return 0;
-}
-
-/* Return the maximum endpoint service interval time (ESIT) payload.
- * Basically, this is the maxpacket size, multiplied by the burst size
- * and mult size.
- */
-static u32 xhci_get_max_esit_payload(struct usb_device *udev,
- struct usb_endpoint_descriptor *ep)
-{
- u8 type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
- int max_burst;
- int max_packet;
- u16 mps;
-
- /* Only applies for interrupt or isochronous endpoints */
- if (type != USB_ENDPOINT_XFER_INT && type != USB_ENDPOINT_XFER_ISOC)
- return 0;
-
- /* FIXME: return ss_ep_comp_descriptor.wBytesPerInterval */
- if (udev->speed == USB_SPEED_SUPER)
- return 0;
-
- mps = le16_to_cpu(ep->wMaxPacketSize);
- max_packet = GET_MAX_PACKET(mps);
- max_burst = (mps & 0x1800) >> 11;
- /* A 0 in max burst means 1 transfer per ESIT */
- return max_packet * (max_burst + 1);
-}
-
-int xhci_handshake(void __iomem *p, u32 mask, u32 done, int usec)
-{
- u32 result;
- u64 start;
-
- start = get_time_ns();
-
- while (1) {
- result = readl(p) & mask;
- if (result == done)
- return 0;
- if (is_timeout(start, usec * USECOND))
- return -ETIMEDOUT;
- }
-}
-
-int xhci_issue_command(struct xhci_hcd *xhci, union xhci_trb *trb)
-{
- int ret;
-
- ret = xhci_ring_issue_trb(&xhci->cmd_ring, trb);
- if (ret)
- return ret;
-
- /* Ring the bell */
- writel(DB_VALUE_HOST, &xhci->dba->doorbell[0]);
- readl(&xhci->dba->doorbell[0]);
-
- return 0;
-}
-
-static void xhci_set_event_dequeue(struct xhci_hcd *xhci)
-{
- u64 reg64;
-
- reg64 = xhci_read_64(&xhci->ir_set->erst_dequeue);
- reg64 &= ERST_PTR_MASK;
- /*
- * Don't clear the EHB bit (which is RW1C) because
- * there might be more events to service.
- */
- reg64 &= ~ERST_EHB;
- reg64 |= (dma_addr_t)xhci->event_ring.dequeue &
- ~(dma_addr_t)ERST_PTR_MASK;
-
- /* Update HC event ring dequeue pointer */
- xhci_write_64(reg64, &xhci->ir_set->erst_dequeue);
-}
-
-int xhci_wait_for_event(struct xhci_hcd *xhci, u8 type, union xhci_trb *trb)
-{
- while (true) {
- union xhci_trb *deq = xhci->event_ring.dequeue;
- u8 event_type;
- int i, ret;
-
- ret = xhci_handshake(&deq->event_cmd.flags,
- cpu_to_le32(TRB_CYCLE),
- cpu_to_le32(xhci->event_ring.cycle_state),
- XHCI_CMD_DEFAULT_TIMEOUT / USECOND);
- if (ret) {
- dev_err(xhci->dev, "Timeout while waiting for event\n");
- return ret;
- }
-
- for (i = 0; i < 4; i++)
- trb->generic.field[i] =
- le32_to_cpu(deq->generic.field[i]);
-
- xhci_set_event_dequeue(xhci);
- xhci_ring_increment(&xhci->event_ring, 0);
-
- event_type = TRB_FIELD_TO_TYPE(trb->event_cmd.flags);
-
- switch (event_type) {
- case TRB_PORT_STATUS:
- dev_dbg(xhci->dev, "Event PortStatusChange %u\n",
- GET_PORT_ID(trb->generic.field[0]));
- break;
- case TRB_TRANSFER:
- dev_dbg(xhci->dev, "Event Transfer %u\n",
- GET_COMP_CODE(trb->event_cmd.status));
- ret = -GET_COMP_CODE(trb->event_cmd.status);
- if (ret == -COMP_SUCCESS)
- ret = 0;
- break;
- case TRB_COMPLETION:
- dev_dbg(xhci->dev, "Event CommandCompletion %u\n",
- GET_COMP_CODE(trb->event_cmd.status));
- ret = -GET_COMP_CODE(trb->event_cmd.status);
- if (ret == -COMP_SUCCESS)
- ret = 0;
- break;
- default:
- dev_err(xhci->dev, "unhandled event %u (%02x) [%08x %08x %08x %08x]\n",
- event_type, event_type,
- trb->generic.field[0], trb->generic.field[1],
- trb->generic.field[2], trb->generic.field[3]);
- }
-
- if (event_type == type)
- return ret;
- }
- return -ENOSYS;
-}
-
-static struct xhci_virtual_device *xhci_find_virtdev(struct xhci_hcd *xhci,
- struct usb_device *udev)
-{
- struct xhci_virtual_device *vdev;
-
- list_for_each_entry(vdev, &xhci->vdev_list, list)
- if (vdev->udev == udev)
- return vdev;
-
- return NULL;
-}
-
-static struct xhci_container_ctx *
-xhci_alloc_container_ctx(struct xhci_hcd *xhci, int type)
-{
- struct xhci_container_ctx *ctx;
-
- if ((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT))
- return NULL;
-
- ctx = xzalloc(sizeof(*ctx));
- ctx->type = type;
- ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
- if (type == XHCI_CTX_TYPE_INPUT)
- ctx->size += HCC_CTX_SIZE(xhci->hcc_params);
-
- ctx->bytes = dma_alloc_coherent(ctx->size, &ctx->dma);
- if (WARN_ON(!ctx->bytes)) {
- kfree(ctx);
- return NULL;
- }
- return ctx;
-}
-
-static void xhci_free_container_ctx(struct xhci_hcd *xhci,
- struct xhci_container_ctx *ctx)
-{
- if (!ctx)
- return;
- dma_free_coherent(ctx->bytes, ctx->dma, ctx->size);
- kfree(ctx);
-}
-
-static struct xhci_virtual_device *xhci_alloc_virtdev(struct xhci_hcd *xhci,
- struct usb_device *udev)
-{
- struct xhci_virtual_device *vdev;
-
- vdev = xzalloc(sizeof(*vdev));
- vdev->udev = udev;
- list_add_tail(&vdev->list, &xhci->vdev_list);
-
- vdev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE);
- vdev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT);
-
- return vdev;
-}
-
-static void xhci_free_virtdev(struct xhci_virtual_device *vdev)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- int i;
-
- for (i = 0; i < USB_MAXENDPOINTS; i++)
- if (vdev->ep[i])
- xhci_put_endpoint_ring(xhci, vdev->ep[i]);
-
- list_del(&vdev->list);
- xhci_free_container_ctx(xhci, vdev->out_ctx);
- xhci_free_container_ctx(xhci, vdev->in_ctx);
- free(vdev);
-}
-
-static int xhci_virtdev_issue_transfer(struct xhci_virtual_device *vdev,
- u8 ep, union xhci_trb *trb, bool ringbell)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- struct xhci_ring *ring = vdev->ep[ep];
- int ret;
-
- ret = xhci_ring_issue_trb(ring, trb);
- if (ret || !ringbell)
- return ret;
-
- /* Ring the bell */
- writel(DB_VALUE(ep, 0), &xhci->dba->doorbell[vdev->slot_id]);
- readl(&xhci->dba->doorbell[vdev->slot_id]);
-
- return 0;
-}
-
-static void xhci_virtdev_zero_in_ctx(struct xhci_virtual_device *vdev)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- struct xhci_input_control_ctx *in_icc;
- struct xhci_slot_ctx *in_slot;
- struct xhci_ep_ctx *in_ep;
- int i;
-
- in_icc = xhci_get_input_control_ctx(vdev->in_ctx);
- in_slot = xhci_get_slot_ctx(xhci, vdev->in_ctx);
-
- /* When a device's add flag and drop flag are zero, any subsequent
- * configure endpoint command will leave that endpoint's state
- * untouched. Make sure we don't leave any old state in the input
- * endpoint contexts.
- */
- in_icc->drop_flags = 0;
- in_icc->add_flags = 0;
- in_slot->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
- /* Endpoint 0 is always valid */
- in_slot->dev_info |= cpu_to_le32(LAST_CTX(1));
- for (i = 1; i < 31; i++) {
- in_ep = xhci_get_ep_ctx(xhci, vdev->in_ctx, i);
-
- in_ep->ep_info = 0;
- in_ep->ep_info2 = 0;
- in_ep->deq = 0;
- in_ep->tx_info = 0;
- }
-}
-
-static void xhci_init_event_cmd_trb(union xhci_trb *trb,
- u64 cmd_trb, u32 status, u32 flags)
-{
- xhci_write_64(cmd_trb, &trb->event_cmd.cmd_trb);
- writel(status, &trb->event_cmd.status);
- writel(flags, &trb->event_cmd.flags);
-}
-
-static int xhci_virtdev_disable_slot(struct xhci_virtual_device *vdev)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- union xhci_trb trb;
- int ret;
-
- /* Issue Disable Slot Command */
- xhci_init_event_cmd_trb(&trb,
- 0,
- 0,
- TRB_TYPE(TRB_DISABLE_SLOT) |
- SLOT_ID_FOR_TRB(vdev->slot_id));
- xhci_print_trb(xhci, &trb, "Request DisableSlot");
- xhci_issue_command(xhci, &trb);
- ret = xhci_wait_for_event(xhci, TRB_COMPLETION, &trb);
- xhci_print_trb(xhci, &trb, "Response DisableSlot");
-
- /* Clear Device Context Base Address Array */
- xhci->dcbaa[vdev->slot_id] = 0;
-
- return ret;
-}
-
-static int xhci_virtdev_enable_slot(struct xhci_virtual_device *vdev)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- union xhci_trb trb;
- int slot_id;
- int ret;
-
- /* Issue Enable Slot Command */
- xhci_init_event_cmd_trb(&trb,
- 0,
- 0,
- TRB_TYPE(TRB_ENABLE_SLOT));
- xhci_print_trb(xhci, &trb, "Request EnableSlot");
- xhci_issue_command(xhci, &trb);
- ret = xhci_wait_for_event(xhci, TRB_COMPLETION, &trb);
- xhci_print_trb(xhci, &trb, "Response EnableSlot");
- if (ret)
- return ret;
-
- slot_id = TRB_TO_SLOT_ID(trb.event_cmd.flags);
- if (slot_id == 0) {
- dev_err(xhci->dev, "EnableSlot returned reserved slot ID 0\n");
- return -EINVAL;
- }
-
- vdev->slot_id = slot_id;
-
- return 0;
-}
-
-int xhci_virtdev_reset(struct xhci_virtual_device *vdev)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- struct xhci_slot_ctx *out_slot;
- union xhci_trb trb;
- int ret;
-
- out_slot = xhci_get_slot_ctx(xhci, vdev->out_ctx);
-
- /* If device is not setup, there is no point in resetting it */
- if (GET_SLOT_STATE(le32_to_cpu(out_slot->dev_state)) ==
- SLOT_STATE_DISABLED)
- return 0;
-
- xhci_init_event_cmd_trb(&trb,
- 0,
- 0,
- TRB_TYPE(TRB_RESET_DEV) |
- SLOT_ID_FOR_TRB(vdev->slot_id));
- xhci_print_trb(xhci, &trb, "Request Reset");
- xhci_issue_command(xhci, &trb);
- ret = xhci_wait_for_event(xhci, TRB_COMPLETION, &trb);
- xhci_print_trb(xhci, &trb, "Response Reset");
-
- /*
- * The Reset Device command can't fail, according to the 0.95/0.96 spec,
- * unless we tried to reset a slot ID that wasn't enabled,
- * or the device wasn't in the addressed or configured state.
- */
- switch (GET_COMP_CODE(trb.event_cmd.status)) {
- case COMP_CMD_ABORT:
- case COMP_CMD_STOP:
- dev_warn(xhci->dev, "Timeout waiting for reset device command\n");
- ret = -ETIMEDOUT;
- break;
- case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */
- case COMP_CTX_STATE: /* 0.96 completion code for same thing */
- /* Don't treat this as an error. May change my mind later. */
- ret = 0;
- case COMP_SUCCESS:
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-/*
- * Once a hub descriptor is fetched for a device, we need to update the xHC's
- * internal data structures for the device.
- */
-static int xhci_virtdev_update_hub_device(struct xhci_virtual_device *vdev,
- void *buffer, int length)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- struct usb_hub_descriptor *desc = buffer;
- struct xhci_input_control_ctx *in_icc;
- struct xhci_slot_ctx *in_slot, *out_slot;
- union xhci_trb trb;
- u32 dev_info, dev_info2, tt_info;
- u8 maxchild;
- u16 hubchar;
- u32 flags;
- int ret;
-
- out_slot = xhci_get_slot_ctx(xhci, vdev->out_ctx);
-
- /* Need at least first byte of wHubCharacteristics */
- if (length < 4)
- return 0;
- /* Skip already configured hub device */
- if (out_slot->dev_info & DEV_HUB)
- return 0;
-
- maxchild = desc->bNbrPorts;
- hubchar = le16_to_cpu(desc->wHubCharacteristics);
-
- in_slot = xhci_get_slot_ctx(xhci, vdev->in_ctx);
- in_icc = xhci_get_input_control_ctx(vdev->in_ctx);
-
- /* update slot context */
- memcpy(in_slot, out_slot, sizeof(struct xhci_slot_ctx));
- in_icc->add_flags |= cpu_to_le32(SLOT_FLAG);
- in_icc->drop_flags = 0;
- in_slot->dev_state = 0;
- dev_info = le32_to_cpu(in_slot->dev_info);
- dev_info2 = le32_to_cpu(in_slot->dev_info2);
- tt_info = le32_to_cpu(in_slot->tt_info);
-
- dev_info |= DEV_HUB;
- /* HS Multi-TT in bDeviceProtocol */
- if (vdev->udev->speed == USB_SPEED_HIGH &&
- vdev->udev->descriptor->bDeviceProtocol == USB_HUB_PR_HS_MULTI_TT)
- dev_info |= DEV_MTT;
- if (xhci->hci_version > 0x95) {
- dev_info2 |= XHCI_MAX_PORTS(maxchild);
- /* Set TT think time - convert from ns to FS bit times.
- * 0 = 8 FS bit times, 1 = 16 FS bit times,
- * 2 = 24 FS bit times, 3 = 32 FS bit times.
- *
- * xHCI 1.0: this field shall be 0 if the device is not a
- * High-speed hub.
- */
- if (xhci->hci_version < 0x100 ||
- vdev->udev->speed == USB_SPEED_HIGH) {
- u32 think_time = (hubchar & HUB_CHAR_TTTT) >> 5;
- tt_info |= TT_THINK_TIME(think_time);
- }
- }
- in_slot->dev_info = cpu_to_le32(dev_info);
- in_slot->dev_info2 = cpu_to_le32(dev_info2);
- in_slot->tt_info = cpu_to_le32(tt_info);
-
- /* Issue Configure Endpoint or Evaluate Context Command */
- flags = SLOT_ID_FOR_TRB(vdev->slot_id);
- if (xhci->hci_version > 0x95)
- flags |= TRB_TYPE(TRB_CONFIG_EP);
- else
- flags |= TRB_TYPE(TRB_EVAL_CONTEXT);
- xhci_init_event_cmd_trb(&trb,
- vdev->in_ctx->dma,
- 0,
- flags);
- xhci_print_trb(xhci, &trb, "Request ConfigureEndpoint");
- xhci_issue_command(xhci, &trb);
- ret = xhci_wait_for_event(xhci, TRB_COMPLETION, &trb);
- xhci_print_trb(xhci, &trb, "Response ConfigureEndpoint");
- xhci_virtdev_zero_in_ctx(vdev);
-
- return ret;
-}
-
-static int xhci_virtdev_update_hub_status(struct xhci_virtual_device *vhub,
- int port)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vhub->udev->host);
- struct usb_device *udev = vhub->udev->children[port - 1];
- struct xhci_virtual_device *vdev;
-
- if (!udev)
- return 0;
-
- /* Check if we have a virtual device for it */
- vdev = xhci_find_virtdev(xhci, udev);
- if (vdev)
- xhci_virtdev_detach(vdev);
-
- return 0;
-}
-
-static int xhci_virtdev_configure(struct xhci_virtual_device *vdev, int config)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- struct xhci_input_control_ctx *in_icc;
- struct xhci_slot_ctx *in_slot;
- struct usb_device *udev = vdev->udev;
- union xhci_trb trb;
- u32 add_flags = 0, last_ctx;
- int i, j;
- int ret;
-
- for (i = 0; i < udev->config.no_of_if; i++) {
- struct usb_interface *intf = &udev->config.interface[i];
-
- for (j = 0; j < intf->no_of_ep; j++) {
- struct usb_endpoint_descriptor *ep = &intf->ep_desc[j];
- u8 type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
- u8 eptype = xhci_get_endpoint_type(ep->bEndpointAddress,
- ep->bmAttributes);
- u8 epi = xhci_get_endpoint_index(ep->bEndpointAddress,
- ep->bmAttributes);
- struct xhci_ep_ctx *ctx;
- u32 mps, interval, mult, esit, max_packet, max_burst;
- u32 ep_info, ep_info2, tx_info;
-
- ctx = xhci_get_ep_ctx(xhci, vdev->in_ctx, epi);
-
- vdev->ep[epi] = xhci_get_endpoint_ring(xhci);
- if (!vdev->ep[epi])
- return -ENOMEM;
- /* FIXME: set correct ring type */
- xhci_ring_init(vdev->ep[epi], NUM_TRANSFER_TRBS,
- TYPE_BULK);
- add_flags |= BIT(epi+1);
-
- mps = le16_to_cpu(ep->wMaxPacketSize);
- interval = xhci_get_endpoint_interval(vdev->udev, ep);
- mult = xhci_get_endpoint_mult(vdev->udev, ep);
- esit = xhci_get_max_esit_payload(vdev->udev, ep);
- max_packet = GET_MAX_PACKET(mps);
- max_burst = 0;
-
- ep_info = EP_INTERVAL(interval) | EP_MULT(mult);
- ep_info2 = EP_TYPE(eptype);
- if (type == USB_ENDPOINT_XFER_ISOC)
- ep_info2 |= ERROR_COUNT(0);
- else
- ep_info2 |= ERROR_COUNT(3);
-
- switch (udev->speed) {
- case USB_SPEED_SUPER:
- /* FIXME: max_burst = ss_ep_comp.bMaxBurst */
- max_burst = 0;
- break;
- case USB_SPEED_HIGH:
- /* Some devices get this wrong */
- if (type == USB_ENDPOINT_XFER_BULK)
- max_packet = 512;
- if (type == USB_ENDPOINT_XFER_ISOC ||
- type == USB_ENDPOINT_XFER_INT)
- max_burst = (mps & 0x1800) >> 11;
- break;
- case USB_SPEED_FULL:
- case USB_SPEED_LOW:
- break;
- }
- ep_info2 |= MAX_PACKET(max_packet) | MAX_BURST(max_burst);
-
- tx_info = MAX_ESIT_PAYLOAD_FOR_EP(esit);
- switch (type) {
- case USB_ENDPOINT_XFER_CONTROL:
- tx_info |= AVG_TRB_LENGTH_FOR_EP(8);
- break;
- case USB_ENDPOINT_XFER_ISOC:
- case USB_ENDPOINT_XFER_BULK:
- tx_info |= AVG_TRB_LENGTH_FOR_EP(3 * 1024);
- break;
- case USB_ENDPOINT_XFER_INT:
- tx_info |= AVG_TRB_LENGTH_FOR_EP(1 * 1024);
- break;
- }
-
- ctx->ep_info = cpu_to_le32(ep_info);
- ctx->ep_info2 = cpu_to_le32(ep_info2);
- ctx->tx_info = cpu_to_le32(tx_info);
- ctx->deq =
- cpu_to_le64((dma_addr_t)vdev->ep[epi]->enqueue |
- vdev->ep[epi]->cycle_state);
- }
- }
-
- last_ctx = fls(add_flags) - 1;
-
- in_slot = xhci_get_slot_ctx(xhci, vdev->in_ctx);
- in_icc = xhci_get_input_control_ctx(vdev->in_ctx);
-
- /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
- in_icc->add_flags = cpu_to_le32(add_flags);
- in_icc->add_flags |= cpu_to_le32(SLOT_FLAG);
- in_icc->add_flags &= cpu_to_le32(~EP0_FLAG);
- in_icc->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
-
- /* Don't issue the command if there's no endpoints to update. */
- if (in_icc->add_flags == cpu_to_le32(SLOT_FLAG) &&
- in_icc->drop_flags == 0)
- return 0;
-
- in_slot->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
- in_slot->dev_info |= cpu_to_le32(LAST_CTX(last_ctx));
-
- /* Issue Configure Endpoint Command */
- xhci_init_event_cmd_trb(&trb,
- vdev->in_ctx->dma,
- 0,
- TRB_TYPE(TRB_CONFIG_EP) |
- SLOT_ID_FOR_TRB(vdev->slot_id));
- xhci_print_trb(xhci, &trb, "Request ConfigureEndpoint");
- xhci_issue_command(xhci, &trb);
- ret = xhci_wait_for_event(xhci, TRB_COMPLETION, &trb);
- xhci_print_trb(xhci, &trb, "Response ConfigureEndpoint");
- xhci_virtdev_zero_in_ctx(vdev);
-
- return ret;
-}
-
-static int xhci_virtdev_deconfigure(struct xhci_virtual_device *vdev)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- union xhci_trb trb;
- int ret;
-
- /* Issue Deconfigure Endpoint Command */
- xhci_init_event_cmd_trb(&trb,
- vdev->in_ctx->dma,
- 0,
- TRB_TYPE(TRB_CONFIG_EP) | TRB_DC |
- SLOT_ID_FOR_TRB(vdev->slot_id));
- xhci_print_trb(xhci, &trb, "Request DeconfigureEndpoint");
- xhci_issue_command(xhci, &trb);
- ret = xhci_wait_for_event(xhci, TRB_COMPLETION, &trb);
- xhci_print_trb(xhci, &trb, "Response DeconfigureEndpoint");
- xhci_virtdev_zero_in_ctx(vdev);
-
- return ret;
-}
-
-static int xhci_virtdev_init(struct xhci_virtual_device *vdev)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- struct usb_device *top_dev;
- struct xhci_slot_ctx *in_slot;
- struct xhci_ep_ctx *in_ep;
- int max_packets;
- u32 route = 0, dev_info, dev_info2, tt_info, ep_info2, tx_info;
- bool on_hs_hub = false;
- int hs_slot_id = 0;
-
- in_ep = xhci_get_ep_ctx(xhci, vdev->in_ctx, 0);
- in_slot = xhci_get_slot_ctx(xhci, vdev->in_ctx);
-
- /*
- * Find the root hub port this device is under, also determine SlotID
- * of possible external HS hub a LS/FS device could be connected to.
- */
- for (top_dev = vdev->udev; top_dev->parent && top_dev->parent->parent;
- top_dev = top_dev->parent) {
- if (top_dev->parent->descriptor->bDeviceClass != USB_CLASS_HUB)
- continue;
-
- route = (route << 4) | (top_dev->portnr & 0xf);
-
- if (top_dev->parent->speed != USB_SPEED_LOW &&
- top_dev->parent->speed != USB_SPEED_FULL) {
- on_hs_hub = true;
- if (!hs_slot_id) {
- struct xhci_virtual_device *vhub =
- xhci_find_virtdev(xhci, top_dev->parent);
- hs_slot_id = vhub->slot_id;
- }
- }
- }
-
- /* 4.3.3 3) Initalize Input Slot Context */
- dev_info = LAST_CTX(1);
- switch (vdev->udev->speed) {
- case USB_SPEED_SUPER:
- dev_info |= SLOT_SPEED_SS;
- max_packets = 512;
- break;
- case USB_SPEED_HIGH:
- dev_info |= SLOT_SPEED_HS;
- max_packets = 64;
- break;
- case USB_SPEED_FULL:
- dev_info |= SLOT_SPEED_FS;
- max_packets = 64;
- break;
- case USB_SPEED_LOW:
- dev_info |= SLOT_SPEED_LS;
- max_packets = 8;
- break;
- default:
- max_packets = 0;
- break;
- }
- dev_info |= route;
- dev_info2 = ROOT_HUB_PORT(top_dev->portnr);
- tt_info = 0;
-
- /* Is this a LS/FS device under an external HS hub? */
- if (on_hs_hub && (vdev->udev->speed == USB_SPEED_FULL ||
- vdev->udev->speed == USB_SPEED_LOW)) {
- dev_info |= DEV_MTT;
- tt_info |= (top_dev->portnr << 8) | hs_slot_id;
- }
-
- in_slot->dev_info = cpu_to_le32(dev_info);
- in_slot->dev_info2 = cpu_to_le32(dev_info2);
- in_slot->tt_info = cpu_to_le32(tt_info);
-
- /* 4.3.3 4) Initalize Transfer Ring */
- vdev->ep[0] = xhci_get_endpoint_ring(xhci);
- if (!vdev->ep[0])
- return -ENOMEM;
- xhci_ring_init(vdev->ep[0], NUM_TRANSFER_TRBS, TYPE_CTRL);
-
- /* 4.3.3 5) Initialize Input Control Endpoint 0 Context */
- ep_info2 = EP_TYPE(CTRL_EP) | MAX_BURST(0) | ERROR_COUNT(3);
- ep_info2 |= MAX_PACKET(max_packets);
- tx_info = AVG_TRB_LENGTH_FOR_EP(8);
- in_ep->ep_info2 = cpu_to_le32(ep_info2);
- in_ep->tx_info = cpu_to_le32(tx_info);
- in_ep->deq = cpu_to_le64((dma_addr_t)vdev->ep[0]->enqueue |
- vdev->ep[0]->cycle_state);
-
- /* 4.3.3 6+7) Initalize and Set Device Context Base Address Array */
- xhci->dcbaa[vdev->slot_id] = cpu_to_le64(vdev->out_ctx->dma);
-
- return 0;
-}
-
-static int xhci_virtdev_setup(struct xhci_virtual_device *vdev,
- enum xhci_setup_dev setup)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(vdev->udev->host);
- static struct xhci_input_control_ctx *in_icc;
- struct xhci_slot_ctx *in_slot;
- struct xhci_ep_ctx *in_ep;
- union xhci_trb trb;
- u32 flags;
- int ret;
-
- in_slot = xhci_get_slot_ctx(xhci, vdev->in_ctx);
- in_icc = xhci_get_input_control_ctx(vdev->in_ctx);
-
- /*
- * If this is the first Set Address since device
- * plug-in then initialize Slot Context
- */
- if (!in_slot->dev_info)
- xhci_virtdev_init(vdev);
- else {
- in_ep = xhci_get_ep_ctx(xhci, vdev->in_ctx, 0);
-
- /* Otherwise, update Control Ring Dequeue pointer */
- in_ep->deq = cpu_to_le64((dma_addr_t)vdev->ep[0]->enqueue |
- vdev->ep[0]->cycle_state);
- /*
- * FS devices have MaxPacketSize0 of 8 or 64, we start
- * with 64. If assumtion was wrong, fix it up here.
- */
- if (vdev->udev->speed == USB_SPEED_FULL &&
- vdev->udev->maxpacketsize == PACKET_SIZE_8) {
- u32 info = le32_to_cpu(in_ep->ep_info2);
- info &= ~MAX_PACKET_MASK;
- info |= MAX_PACKET(8);
- in_ep->ep_info2 = cpu_to_le32(info);
- }
- }
-
- in_icc->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
- in_icc->drop_flags = 0;
-
- /* Issue Address Device Command */
- flags = TRB_TYPE(TRB_ADDR_DEV) |
- SLOT_ID_FOR_TRB(vdev->slot_id);
- if (setup == SETUP_CONTEXT_ONLY)
- flags |= TRB_BSR;
- xhci_init_event_cmd_trb(&trb,
- vdev->in_ctx->dma,
- 0,
- flags);
- xhci_print_trb(xhci, &trb, "Request AddressDevice");
- xhci_issue_command(xhci, &trb);
- ret = xhci_wait_for_event(xhci, TRB_COMPLETION, &trb);
- xhci_print_trb(xhci, &trb, "Response AddressDevice");
- xhci_virtdev_zero_in_ctx(vdev);
-
- return ret;
-}
-
-static int xhci_virtdev_set_address(struct xhci_virtual_device *vdev)
-{
- return xhci_virtdev_setup(vdev, SETUP_CONTEXT_ADDRESS);
-}
-
-static int xhci_virtdev_enable(struct xhci_virtual_device *vdev)
-{
- return xhci_virtdev_setup(vdev, SETUP_CONTEXT_ONLY);
-}
-
-static int xhci_virtdev_attach(struct xhci_hcd *xhci, struct usb_device *udev)
-{
- struct xhci_virtual_device *vdev;
- int ret;
-
- vdev = xhci_alloc_virtdev(xhci, udev);
- if (IS_ERR(vdev))
- return PTR_ERR(vdev);
-
- ret = xhci_virtdev_enable_slot(vdev);
- if (ret)
- return ret;
-
- return xhci_virtdev_enable(vdev);
-}
-
-int xhci_virtdev_detach(struct xhci_virtual_device *vdev)
-{
- xhci_virtdev_deconfigure(vdev);
- xhci_virtdev_disable_slot(vdev);
- xhci_free_virtdev(vdev);
-
- return 0;
-}
-
-static int xhci_submit_normal(struct usb_device *udev, unsigned long pipe,
- void *buffer, int length)
-{
- struct usb_host *host = udev->host;
- struct xhci_hcd *xhci = to_xhci_hcd(host);
- enum dma_data_direction dma_direction;
- struct xhci_virtual_device *vdev;
- struct xhci_slot_ctx *out_slot;
- dma_addr_t buffer_dma;
- union xhci_trb trb;
- u8 epaddr = usb_pipeendpoint(pipe);
- u8 epi;
- u32 flags = TRB_TYPE(TRB_NORMAL) | TRB_IOC;
- int ret;
-
- if (usb_pipein(pipe)) {
- epaddr |= USB_DIR_IN;
- flags |= TRB_ISP;
- dma_direction = DMA_FROM_DEVICE;
- } else {
- epaddr |= USB_DIR_OUT;
- dma_direction = DMA_TO_DEVICE;
- }
-
- epi = xhci_get_endpoint_index(epaddr, usb_pipetype(pipe));
- vdev = xhci_find_virtdev(xhci, udev);
- if (!vdev)
- return -ENODEV;
-
- out_slot = xhci_get_slot_ctx(xhci, vdev->out_ctx);
-
- dev_dbg(xhci->dev, "%s udev %p vdev %p slot %u state %u epi %u in_ctx %p out_ctx %p\n",
- __func__, udev, vdev, vdev->slot_id,
- GET_SLOT_STATE(le32_to_cpu(out_slot->dev_state)), epi,
- vdev->in_ctx->bytes, vdev->out_ctx->bytes);
-
- /* pass ownership of data buffer to device */
- buffer_dma = dma_map_single(xhci->dev, buffer, length,
- dma_direction);
- if (dma_mapping_error(xhci->dev, buffer_dma))
- return -EFAULT;
-
- /* Normal TRB */
- /* FIXME: TD remainder */
- xhci_init_event_cmd_trb(&trb,
- buffer_dma,
- TRB_LEN(length) | TRB_INTR_TARGET(0),
- flags);
- xhci_print_trb(xhci, &trb, "Request Normal");
- xhci_virtdev_issue_transfer(vdev, epi, &trb, true);
- ret = xhci_wait_for_event(xhci, TRB_TRANSFER, &trb);
- xhci_print_trb(xhci, &trb, "Response Normal");
-
- /* Regain ownership of data buffer from device */
- dma_unmap_single(xhci->dev, buffer_dma, length,
- dma_direction);
- switch (ret) {
- case -COMP_SHORT_TX:
- udev->status = 0;
- udev->act_len = length - EVENT_TRB_LEN(trb.event_cmd.status);
- return 0;
- case 0:
- udev->status = 0;
- udev->act_len = 0;
- return 0;
- case -ETIMEDOUT:
- udev->status = USB_ST_CRC_ERR;
- return -1;
- default:
- return -1;
- }
-}
-
-static int xhci_submit_control(struct usb_device *udev, unsigned long pipe,
- void *buffer, int length, struct devrequest *req)
-{
- struct usb_host *host = udev->host;
- struct xhci_hcd *xhci = to_xhci_hcd(host);
- struct xhci_virtual_device *vdev;
- struct xhci_slot_ctx *out_slot;
- dma_addr_t buffer_dma = 0;
- union xhci_trb trb;
- u16 typeReq = (req->requesttype << 8) | req->request;
- u64 field[2];
- u32 flags;
- int ret;
-
- dev_dbg(xhci->dev, "%s req %u (%#x), type %u (%#x), value %u (%#x), index %u (%#x), length %u (%#x)\n",
- __func__, req->request, req->request,
- req->requesttype, req->requesttype,
- le16_to_cpu(req->value), le16_to_cpu(req->value),
- le16_to_cpu(req->index), le16_to_cpu(req->index),
- le16_to_cpu(req->length), le16_to_cpu(req->length));
-
- vdev = xhci_find_virtdev(xhci, udev);
- if (!vdev) {
- ret = xhci_virtdev_attach(xhci, udev);
- if (ret)
- return ret;
- vdev = xhci_find_virtdev(xhci, udev);
- }
- if (!vdev)
- return -ENODEV;
-
- out_slot = xhci_get_slot_ctx(xhci, vdev->out_ctx);
-
- dev_dbg(xhci->dev, "%s udev %p vdev %p slot %u state %u epi %u in_ctx %p out_ctx %p\n",
- __func__, udev, vdev, vdev->slot_id,
- GET_SLOT_STATE(le32_to_cpu(out_slot->dev_state)), 0,
- vdev->in_ctx->bytes, vdev->out_ctx->bytes);
-
- if (req->request == USB_REQ_SET_ADDRESS)
- return xhci_virtdev_set_address(vdev);
- if (req->request == USB_REQ_SET_CONFIGURATION) {
- ret = xhci_virtdev_configure(vdev, le16_to_cpu(req->value));
- if (ret)
- return ret;
- }
-
- if (length > 0) {
- /* Pass ownership of data buffer to device */
- buffer_dma = dma_map_single(xhci->dev, buffer, length,
- (req->requesttype & USB_DIR_IN) ?
- DMA_FROM_DEVICE : DMA_TO_DEVICE);
- if (dma_mapping_error(xhci->dev, buffer_dma))
- return -EFAULT;
- }
- /* Setup TRB */
- field[0] = le16_to_cpu(req->value) << 16 |
- req->request << 8 | req->requesttype;
- field[1] = le16_to_cpu(req->length) << 16 |
- le16_to_cpu(req->index);
- flags = TRB_TYPE(TRB_SETUP) | TRB_IDT;
- if (xhci->hci_version >= 0x100 && length > 0) {
- if (req->requesttype & USB_DIR_IN)
- flags |= TRB_TX_TYPE(TRB_DATA_IN);
- else
- flags |= TRB_TX_TYPE(TRB_DATA_OUT);
- }
- xhci_init_event_cmd_trb(&trb,
- field[1] << 32 | field[0],
- TRB_LEN(8) | TRB_INTR_TARGET(0),
- flags);
- xhci_print_trb(xhci, &trb, "Request Setup ");
- xhci_virtdev_issue_transfer(vdev, 0, &trb, false);
-
- /* Data TRB */
- if (length > 0) {
- /* FIXME: TD remainder */
- flags = TRB_TYPE(TRB_DATA) | TRB_IOC;
- if (req->requesttype & USB_DIR_IN)
- flags |= TRB_ISP | TRB_DIR_IN;
- xhci_init_event_cmd_trb(&trb,
- buffer_dma,
- TRB_LEN(length) | TRB_INTR_TARGET(0),
- flags);
- xhci_print_trb(xhci, &trb, "Request Data ");
- xhci_virtdev_issue_transfer(vdev, 0, &trb, false);
- }
-
- /* Status TRB */
- flags = TRB_TYPE(TRB_STATUS) | TRB_IOC;
- if (!(length > 0 && req->requesttype & USB_DIR_IN))
- flags |= TRB_DIR_IN;
- xhci_init_event_cmd_trb(&trb,
- 0,
- TRB_INTR_TARGET(0),
- flags);
- xhci_print_trb(xhci, &trb, "Request Status");
- xhci_virtdev_issue_transfer(vdev, 0, &trb, true);
-
- if (length > 0) {
- ret = xhci_wait_for_event(xhci, TRB_TRANSFER, &trb);
- xhci_print_trb(xhci, &trb, "Response Data ");
- if (ret == -COMP_SHORT_TX)
- length -= EVENT_TRB_LEN(trb.event_cmd.status);
- else if (ret < 0)
- goto dma_regain;
- }
-
- ret = xhci_wait_for_event(xhci, TRB_TRANSFER, &trb);
- xhci_print_trb(xhci, &trb, "Response Status");
-
-dma_regain:
- if (length > 0) {
- /* Regain ownership of data buffer from device */
- dma_unmap_single(xhci->dev, buffer_dma, length,
- (req->requesttype & USB_DIR_IN) ?
- DMA_FROM_DEVICE : DMA_TO_DEVICE);
- }
-
- if (ret < 0)
- return ret;
-
- /*
- * usb core doesn't notify us about device events on
- * external Hubs, track it ourselves.
- */
- if (typeReq == GetHubDescriptor)
- xhci_virtdev_update_hub_device(vdev, buffer, length);
- if (typeReq == ClearPortFeature &&
- cpu_to_le16(req->value) == USB_PORT_FEAT_C_CONNECTION)
- xhci_virtdev_update_hub_status(vdev, le16_to_cpu(req->index));
-
- return length;
-}
-
-/*
- * xHCI host controller driver
- */
-
-static void xhci_dma_alloc(struct xhci_hcd *xhci)
-{
- size_t sz_sp, sz_spa, sz_dca, sz_cmd, sz_evt, sz_erst, sz_ep;
- u64 reg64;
- void *p;
- int i, num_ep;
-
- /* Scratchpad buffers: PAGE_SIZE aligned */
- sz_sp = ALIGN(xhci->num_sp * xhci->page_size, xhci->page_size);
- /* Device Context Array: 64B aligned */
- sz_dca = ALIGN(xhci->max_slots * sizeof(u64), 64);
- /* Command Ring: 64B aligned */
- sz_cmd = ALIGN(NUM_COMMAND_TRBS * sizeof(union xhci_trb), 64);
- /* Event Ring: 64B aligned */
- sz_evt = NUM_EVENT_SEGM *
- ALIGN(NUM_EVENT_TRBS * sizeof(union xhci_trb), 64);
- /* Event Ring Segment Table: 64B aligned */
- sz_erst = ALIGN(NUM_EVENT_SEGM * sizeof(struct xhci_erst_entry), 64);
- /* Scratchpad Buffer Array: 64B aligned */
- sz_spa = ALIGN(xhci->num_sp * sizeof(u64), 64);
-
- xhci->dma_size = sz_sp + sz_spa + sz_dca + sz_cmd + sz_evt + sz_erst;
-
- /*
- * Endpoint Transfer Ring: 16B aligned
- *
- * We allocate up to MAX_EP_RINGS from the rest of the PAGE
- * for virtual devices to pick-up (and return) for endpoint trbs.
- */
- sz_ep = ALIGN(NUM_TRANSFER_TRBS * sizeof(union xhci_trb), 16);
-
- num_ep = PAGE_ALIGN(xhci->dma_size) -
- MIN_EP_RINGS * sz_ep - xhci->dma_size;
- num_ep /= sz_ep;
- num_ep = max(MAX_EP_RINGS, MIN_EP_RINGS + num_ep);
- xhci->dma_size += num_ep * sz_ep;
-
- p = dma_alloc_coherent(xhci->dma_size, DMA_ADDRESS_BROKEN);
-
- xhci->sp = p; p += sz_sp;
- xhci->dcbaa = p; p += sz_dca;
- xhci->cmd_ring.trbs = p; p += sz_cmd;
- xhci->event_ring.trbs = p; p += sz_evt;
- xhci->event_erst = p; p += sz_erst;
- xhci->sp_array = p; p += sz_spa;
-
- xhci->rings = xzalloc(num_ep * sizeof(*xhci->rings));
- for (i = 0; i < num_ep; i++) {
- xhci->rings[i].trbs = p;
- p += sz_ep;
- xhci_put_endpoint_ring(xhci, &xhci->rings[i]);
- }
-
- /* Setup Scratchpad Buffer Array and Base Address in Device Context */
- reg64 = cpu_to_le64((dma_addr_t)xhci->sp);
- for (i = 0; i < xhci->num_sp; i++, reg64 += xhci->page_size)
- xhci->sp_array[i] = cpu_to_le64(reg64);
- if (xhci->num_sp)
- xhci->dcbaa[0] = cpu_to_le64((dma_addr_t)xhci->sp_array);
-
- /* Setup Event Ring Segment Table and Event Ring */
- reg64 = (dma_addr_t)&xhci->event_ring.trbs[0];
- xhci->event_erst[0].seg_addr = cpu_to_le64(reg64);
- xhci->event_erst[0].seg_size = cpu_to_le32(NUM_EVENT_TRBS);
- xhci_ring_init(&xhci->event_ring, NUM_EVENT_TRBS, TYPE_EVENT);
-
- /* Setup Command Ring */
- xhci_ring_init(&xhci->cmd_ring, NUM_COMMAND_TRBS, TYPE_COMMAND);
-}
-
-static int xhci_halt(struct xhci_hcd *xhci)
-{
- u32 reg = readl(&xhci->op_regs->status);
- u32 mask = (u32)~XHCI_IRQS;
-
- if (!(reg & STS_HALT))
- mask &= ~CMD_RUN;
-
- /* disable any IRQs and begin halting process */
- reg = readl(&xhci->op_regs->command);
- reg &= mask;
- writel(reg, &xhci->op_regs->command);
-
- return xhci_handshake(&xhci->op_regs->status,
- STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
-}
-
-static int xhci_reset(struct xhci_hcd *xhci)
-{
- u32 reg;
- int ret;
-
- reg = readl(&xhci->op_regs->command);
- reg |= CMD_RESET;
- writel(reg, &xhci->op_regs->command);
-
- ret = xhci_handshake(&xhci->op_regs->command,
- CMD_RESET, 0, 10 * SECOND / USECOND);
- if (ret) {
- dev_err(xhci->dev, "failed to reset\n");
- return ret;
- }
-
- return 0;
-}
-
-static int xhci_start(struct xhci_hcd *xhci)
-{
- u32 reg;
- int ret, i;
-
- reg = readl(&xhci->op_regs->command);
- reg |= CMD_RUN;
- writel(reg, &xhci->op_regs->command);
-
- ret = xhci_handshake(&xhci->op_regs->status,
- STS_HALT, 0, XHCI_MAX_HALT_USEC);
- if (ret) {
- dev_err(xhci->dev, "failed to start\n");
- return ret;
- }
-
- /* Ensure ports are powered-off */
- for (i = 0; i < xhci->num_usb_ports; i++)
- xhci_hub_port_power(xhci, i, false);
-
- return 0;
-}
-
-static int xhci_init(struct usb_host *host)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(host);
- u32 reg;
- u64 reg64;
- int i, tmp, ret;
-
- ret = xhci_halt(xhci);
- if (ret)
- return ret;
-
- ret = xhci_reset(xhci);
- if (ret)
- return ret;
-
- tmp = readl(&xhci->op_regs->page_size);
- for (i = 0; i < 16; i++) {
- if ((0x1 & tmp) != 0)
- break;
- tmp >>= 1;
- }
- if (i < 16)
- tmp = (1 << (i+12));
- else
- dev_warn(xhci->dev, "unsupported page size %d\n", tmp);
- /* Use 4K pages, since that's common and the minimum the HC supports */
- xhci->page_shift = 12;
- xhci->page_size = 1 << xhci->page_shift;
-
- xhci->rootdev = 0;
- xhci->num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
- xhci->max_slots = HCS_MAX_SLOTS(xhci->hcs_params1);
- xhci_dma_alloc(xhci);
-
- ret = xhci_hub_setup_ports(xhci);
- if (ret)
- return ret;
-
- /*
- * Program the Max Device Slots Enabled (MaxSlotsEn) field in the
- * CONFIG register (5.4.7) with the max number of slots HC can handle.
- */
- reg = readl(&xhci->op_regs->config_reg);
- reg |= (xhci->max_slots & HCS_SLOTS_MASK);
- writel(reg, &xhci->op_regs->config_reg);
-
- /*
- * Program the Device Context Base Address Array Pointer (DCBAAP)
- * register (5.4.6) with a 64-bit address pointing to where the
- * Device Context Base Address Array is located.
- */
- xhci_write_64((dma_addr_t)xhci->dcbaa, &xhci->op_regs->dcbaa_ptr);
-
- /*
- * Define the Command Ring Dequeue Pointer by programming the
- * Command Ring Control Register (5.4.5) with a 64-bit address
- * pointing to the starting address of the first TRB of the Command
- * Ring.
- */
- reg64 = xhci_read_64(&xhci->op_regs->cmd_ring);
- reg64 = (reg64 & (u64)CMD_RING_RSVD_BITS) |
- ((dma_addr_t)&xhci->cmd_ring.trbs[0] &
- ~(dma_addr_t)CMD_RING_RSVD_BITS) |
- xhci->cmd_ring.cycle_state;
- xhci_write_64(reg64, &xhci->op_regs->cmd_ring);
-
- reg = readl(&xhci->cap_regs->db_off) & DBOFF_MASK;
- xhci->dba = (void __iomem *)xhci->cap_regs + reg;
- xhci->ir_set = &xhci->run_regs->ir_set[0];
-
- reg64 = (dma_addr_t)&xhci->event_ring.trbs[0] &
- ~(dma_addr_t)CMD_RING_RSVD_BITS;
- xhci->event_erst[i].seg_addr = cpu_to_le64(reg64);
- xhci->event_erst[i].seg_size = cpu_to_le32(NUM_EVENT_TRBS);
- reg = readl(&xhci->ir_set->erst_size) & ~ERST_SIZE_MASK;
- writel(reg | NUM_EVENT_SEGM, &xhci->ir_set->erst_size);
- xhci_set_event_dequeue(xhci);
-
- reg64 = xhci_read_64(&xhci->ir_set->erst_base);
- reg64 &= ERST_PTR_MASK;
- reg64 |= (dma_addr_t)xhci->event_erst &
- ~(dma_addr_t)CMD_RING_RSVD_BITS;
- xhci_write_64(reg64, &xhci->ir_set->erst_base);
-
- /*
- * Write the USBCMD (5.4.1) to turn the host controller ON via
- * setting the Run/Stop (R/S) bit to ‘1’. This operation allows the
- * xHC to begin accepting doorbell references.
- */
-
- return xhci_start(xhci);
-
- /*
- * At this point, the host controller is up and running and the Root
- * Hub ports (5.4.8) will begin reporting device connects, etc.,
- * and system software may begin enumerating devices.
- * System software may follow the procedures described in section 4.3,
- * to enumerate attached devices.
- *
- * USB2 (LS/FS/HS) devices require the port reset process to advance
- * the port to the Enabled state. Once USB2 ports are Enabled, the port
- * is active with SOFs occurring on the port, but the Pipe Schedules
- * have not yet been enabled.
- *
- * SS ports automatically advance to the Enabled state if a successful
- * device attach is detected.
- */
-}
-
-static int xhci_submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int length, int timeout)
-{
- return xhci_submit_normal(dev, pipe, buffer, length);
-}
-
-static int xhci_submit_control_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int length, struct devrequest *setup, int timeout)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(dev->host);
-
- /* Catch Root Hub requests */
- if (usb_pipedevice(pipe) == xhci->rootdev) {
- if (xhci->rootdev == 0)
- dev->speed = USB_SPEED_HIGH;
- return xhci_hub_control(dev, pipe, buffer, length, setup);
- }
-
- return xhci_submit_control(dev, pipe, buffer, length, setup);
-}
-
-static int xhci_submit_int_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int length, int interval)
-{
- struct xhci_hcd *xhci = to_xhci_hcd(dev->host);
-
- dev_err(xhci->dev, "Interrupt messages not supported\n");
-
- return -ENOTSUPP;
-}
-
-static int xhci_detect(struct device_d *dev)
-{
- struct xhci_hcd *xhci = dev->priv;
-
- return usb_host_detect(&xhci->host);
-}
-
-int xhci_register(struct device_d *dev, struct xhci_data *data)
-{
- struct usb_host *host;
- struct xhci_hcd *xhci;
-
- xhci = xzalloc(sizeof(*xhci));
- host = &xhci->host;
- INIT_LIST_HEAD(&xhci->vdev_list);
- INIT_LIST_HEAD(&xhci->rings_list);
- xhci->dev = dev;
- xhci->cap_regs = data->regs;
- xhci->op_regs = (void __iomem *)xhci->cap_regs +
- HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
- xhci->run_regs = (void __iomem *)xhci->cap_regs +
- (readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
- /* Cache read-only capability registers */
- xhci->hcs_params1 = readl(&xhci->cap_regs->hcs_params1);
- xhci->hcs_params2 = readl(&xhci->cap_regs->hcs_params2);
- xhci->hcs_params3 = readl(&xhci->cap_regs->hcs_params3);
- xhci->hcc_capbase = readl(&xhci->cap_regs->hc_capbase);
- xhci->hci_version = HC_VERSION(xhci->hcc_capbase);
- xhci->hcc_params = readl(&xhci->cap_regs->hcc_params);
-
- host->hw_dev = dev;
- host->init = xhci_init;
- host->submit_int_msg = xhci_submit_int_msg;
- host->submit_control_msg = xhci_submit_control_msg;
- host->submit_bulk_msg = xhci_submit_bulk_msg;
-
- dev->priv = xhci;
- dev->detect = xhci_detect;
-
- usb_register_host(host);
-
- dev_info(dev, "USB xHCI %x.%02x\n",
- xhci->hci_version >> 8, xhci->hci_version & 0xff);
-
- return 0;
-}
-
-/*
- * xHCI platform driver
- */
-
-static int xhci_probe(struct device_d *dev)
-{
- struct resource *iores;
- struct xhci_data data = {};
-
- iores = dev_request_mem_resource(dev, 0);
- if (IS_ERR(iores))
- return PTR_ERR(iores);
- data.regs = IOMEM(iores->start);
-
- return xhci_register(dev, &data);
-}
-
-static void xhci_remove(struct device_d *dev)
-{
- struct xhci_hcd *xhci = dev->priv;
- xhci_halt(xhci);
-}
-
-static struct driver_d xhci_driver = {
- .name = "xHCI",
- .probe = xhci_probe,
- .remove = xhci_remove,
-};
-device_platform_driver(xhci_driver);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
deleted file mode 100644
index 5ae16f5ca5..0000000000
--- a/drivers/usb/host/xhci-hub.c
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * xHCI USB 3.0 Root Hub
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This currently does not support any SuperSpeed capabilities.
- *
- * Some code borrowed from the Linux xHCI driver
- * Author: Sarah Sharp
- * Copyright (C) 2008 Intel Corp.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-//#define DEBUG
-#include <clock.h>
-#include <common.h>
-#include <io.h>
-#include <linux/err.h>
-#include <usb/usb.h>
-#include <usb/xhci.h>
-
-#include "xhci.h"
-
-static const struct usb_root_hub_info usb_rh_info = {
- .hub = {
- .bLength = USB_DT_HUB_NONVAR_SIZE +
- ((USB_MAXCHILDREN + 1 + 7) / 8),
- .bDescriptorType = USB_DT_HUB,
- .bNbrPorts = 0, /* runtime modified */
- .wHubCharacteristics = 0,
- .bPwrOn2PwrGood = 10,
- .bHubContrCurrent = 0,
- .u.hs.DeviceRemovable = {},
- .u.hs.PortPwrCtrlMask = {}
- },
- .device = {
- .bLength = USB_DT_DEVICE_SIZE,
- .bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = __constant_cpu_to_le16(0x0002), /* v2.0 */
- .bDeviceClass = USB_CLASS_HUB,
- .bDeviceSubClass = 0,
- .bDeviceProtocol = USB_HUB_PR_HS_MULTI_TT,
- .bMaxPacketSize0 = 64,
- .idVendor = 0x0000,
- .idProduct = 0x0000,
- .bcdDevice = __constant_cpu_to_le16(0x0001),
- .iManufacturer = 1,
- .iProduct = 2,
- .iSerialNumber = 0,
- .bNumConfigurations = 1
- },
- .config = {
- .bLength = USB_DT_CONFIG_SIZE,
- .bDescriptorType = USB_DT_CONFIG,
- .wTotalLength = __constant_cpu_to_le16(USB_DT_CONFIG_SIZE +
- USB_DT_INTERFACE_SIZE + USB_DT_ENDPOINT_SIZE),
- .bNumInterfaces = 1,
- .bConfigurationValue = 1,
- .iConfiguration = 0,
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 0
- },
- .interface = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = 0,
- .bAlternateSetting = 0,
- .bNumEndpoints = 1,
- .bInterfaceClass = USB_CLASS_HUB,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
- .iInterface = 0
- },
- .endpoint = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = 0x81, /* UE_DIR_IN | EHCI_INTR_ENDPT */
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16((USB_MAXCHILDREN + 1 + 7) / 8),
- .bInterval = 255
- }
-};
-
-static void xhci_setup_common_hub_descriptor(struct xhci_hcd *xhci,
- struct usb_hub_descriptor *desc, int ports)
-{
- u16 val;
-
- /* xhci section 5.4.9 says 20ms max */
- desc->bPwrOn2PwrGood = 10;
- desc->bHubContrCurrent = 0;
- desc->bNbrPorts = xhci->num_usb_ports;
-
- val = 0;
- /* Bits 1:0 - support per-port power switching, or power always on */
- if (HCC_PPC(xhci->hcc_params))
- val |= HUB_CHAR_INDV_PORT_LPSM;
- else
- val |= HUB_CHAR_NO_LPSM;
- /* Bit 2 - root hubs are not part of a compound device */
- /* Bits 4:3 - individual port over current protection */
- val |= HUB_CHAR_INDV_PORT_OCPM;
- /* Bits 6:5 - no TTs in root ports */
- /* Bit 7 - no port indicators */
- desc->wHubCharacteristics = cpu_to_le16(val);
-}
-
-static void xhci_setup_usb2_hub_descriptor(struct xhci_hcd *xhci)
-{
- struct usb_hub_descriptor *desc = &xhci->usb_info.hub;
- __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
- int ports;
- u32 portsc;
- u16 val;
- int i;
-
- ports = xhci->num_usb_ports;
- xhci_setup_common_hub_descriptor(xhci, desc, ports);
- desc->bDescriptorType = USB_DT_HUB;
- val = 1 + (ports / 8);
- desc->bLength = USB_DT_HUB_NONVAR_SIZE + 2 * val;
-
- /* The Device Removable bits are reported on a byte granularity.
- * If the port doesn't exist within that byte, the bit is set to 0.
- */
- memset(port_removable, 0, sizeof(port_removable));
- for (i = 0; i < ports; i++) {
- portsc = readl(xhci->usb_ports[i]);
- /* If a device is removable, PORTSC reports a 0, same as in the
- * hub descriptor DeviceRemovable bits.
- */
- if (portsc & PORT_DEV_REMOVE)
- /* This math is hairy because bit 0 of DeviceRemovable
- * is reserved, and bit 1 is for port 1, etc.
- */
- port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
- }
-
- /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
- * ports on it. The USB 2.0 specification says that there are two
- * variable length fields at the end of the hub descriptor:
- * DeviceRemovable and PortPwrCtrlMask. But since we can have less than
- * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
- * to set PortPwrCtrlMask bits. PortPwrCtrlMask must always be set to
- * 0xFF, so we initialize the both arrays (DeviceRemovable and
- * PortPwrCtrlMask) to 0xFF. Then we set the DeviceRemovable for each
- * set of ports that actually exist.
- */
- memset(desc->u.hs.DeviceRemovable, 0xff,
- sizeof(desc->u.hs.DeviceRemovable));
- memset(desc->u.hs.PortPwrCtrlMask, 0xff,
- sizeof(desc->u.hs.PortPwrCtrlMask));
-
- for (i = 0; i < (ports + 1 + 7) / 8; i++)
- memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
- sizeof(__u8));
-}
-
-/* FIXME: usb core does not know about USB_SPEED_SUPER at all */
-static __maybe_unused void xhci_setup_usb3_hub_descriptor(struct xhci_hcd *xhci)
-{
- struct usb_hub_descriptor *desc = &xhci->usb_info.hub;
- int ports;
- u16 port_removable;
- u32 portsc;
- int i;
-
- ports = xhci->num_usb_ports;
- xhci_setup_common_hub_descriptor(xhci, desc, ports);
- desc->bDescriptorType = USB_DT_SS_HUB;
- desc->bLength = USB_DT_SS_HUB_SIZE;
- /*
- * header decode latency should be zero for roothubs,
- * see section 4.23.5.2.
- */
- desc->u.ss.bHubHdrDecLat = 0;
- desc->u.ss.wHubDelay = 0;
- port_removable = 0;
- /* bit 0 is reserved, bit 1 is for port 1, etc. */
- for (i = 0; i < ports; i++) {
- portsc = readl(xhci->usb_ports[i]);
- if (portsc & PORT_DEV_REMOVE)
- port_removable |= 1 << (i + 1);
- }
- desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
-}
-
-static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
- __le32 __iomem *addr, u8 major_revision, int max_caps)
-{
- u32 reg, port_offset, port_count;
- int i;
-
- if (major_revision > 0x03) {
- dev_warn(xhci->dev, "Ignoring unknown port speed, Ext Cap %p, rev %02x\n",
- addr, major_revision);
- return;
- }
-
- /* Port offset and count in the third dword, see section 7.2 */
- reg = readl(addr + 2);
- port_offset = XHCI_EXT_PORT_OFF(reg);
- port_count = XHCI_EXT_PORT_COUNT(reg);
-
- /* Port count includes the current port offset */
- if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
- /* WTF? "Valid values are ‘1’ to MaxPorts" */
- return;
-
- /* cache usb2 port capabilities */
- if (major_revision < 0x03 && xhci->num_ext_caps < max_caps)
- xhci->ext_caps[xhci->num_ext_caps++] = reg;
-
- port_offset--;
- for (i = port_offset; i < (port_offset + port_count); i++) {
- /* Duplicate entry. Ignore the port if the revisions differ. */
- if (xhci->port_array[i] != 0) {
- dev_warn(xhci->dev, "Duplicate port entry, Ext Cap %p, port %u\n",
- addr, i);
- dev_warn(xhci->dev, "Port was marked as USB %u, duplicated as USB %u\n",
- xhci->port_array[i], major_revision);
- /*
- * Only adjust the roothub port counts if we haven't
- * found a similar duplicate.
- */
- if (xhci->port_array[i] != major_revision &&
- xhci->port_array[i] != DUPLICATE_ENTRY) {
- xhci->num_usb_ports--;
- xhci->port_array[i] = DUPLICATE_ENTRY;
- }
- continue;
- }
- xhci->port_array[i] = major_revision;
- xhci->num_usb_ports++;
- }
-}
-
-int xhci_hub_setup_ports(struct xhci_hcd *xhci)
-{
- u32 offset, tmp_offset;
- __le32 __iomem *addr, *tmp_addr;
- unsigned int num_ports;
- int i, cap_count = 0;
-
- offset = HCC_EXT_CAPS(xhci->hcc_params);
- if (offset == 0) {
- dev_err(xhci->dev, "No Extended Capability Registers\n");
- return -ENODEV;
- }
-
- addr = &xhci->cap_regs->hc_capbase + offset;
-
- /* count extended protocol capability entries for later caching */
- tmp_addr = addr;
- tmp_offset = offset;
- do {
- u32 cap_id = readl(tmp_addr);
-
- if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
- cap_count++;
-
- tmp_offset = XHCI_EXT_CAPS_NEXT(cap_id);
- tmp_addr += tmp_offset;
- } while (tmp_offset);
-
- num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
- xhci->port_array = xzalloc(num_ports * sizeof(*xhci->port_array));
- xhci->ext_caps = xzalloc(cap_count * sizeof(*xhci->ext_caps));
-
- while (1) {
- u32 cap_id = readl(addr);
-
- if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
- xhci_add_in_port(xhci, num_ports, addr,
- (u8)XHCI_EXT_PORT_MAJOR(cap_id),
- cap_count);
- offset = XHCI_EXT_CAPS_NEXT(cap_id);
- if (!offset || xhci->num_usb_ports == num_ports)
- break;
- addr += offset;
- }
-
- if (xhci->num_usb_ports == 0) {
- dev_err(xhci->dev, "No ports on the roothubs?\n");
- return -ENODEV;
- }
-
- xhci->usb_ports = xzalloc(num_ports * sizeof(*xhci->usb_ports));
- for (i = 0; i < num_ports; i++)
- xhci->usb_ports[i] = &xhci->op_regs->port_status_base +
- NUM_PORT_REGS * i;
- memcpy(&xhci->usb_info, &usb_rh_info, sizeof(usb_rh_info));
- xhci_setup_usb2_hub_descriptor(xhci);
-
- return 0;
-}
-
-/*
- * These bits are Read Only (RO) and should be saved and written to the
- * registers: 0, 3, 10:13, 30
- * connect status, over-current status, port speed, and device removable.
- * connect status and port speed are also sticky - meaning they're in
- * the AUX well and they aren't changed by a hot, warm, or cold reset.
- */
-#define XHCI_PORT_RO (PORT_CONNECT | PORT_OC | DEV_SPEED_MASK | \
- PORT_DEV_REMOVE)
-/*
- * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
- * bits 5:8, 9, 14:15, 25:27
- * link state, port power, port indicator state, "wake on" enable state
- */
-#define XHCI_PORT_RWS (PORT_PLS_MASK | PORT_POWER | PORT_LED_MASK | \
- PORT_WKCONN_E | PORT_WKDISC_E | PORT_WKOC_E)
-/*
- * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
- * bit 4 (port reset)
- */
-#define XHCI_PORT_RW1S (PORT_RESET)
-/*
- * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
- * bits 1, 17, 18, 19, 20, 21, 22, 23
- * port enable/disable, and
- * change bits: connect, PED, warm port reset changed (reserved 0 for USB 2.0),
- * over-current, reset, link state, and L1 change
- */
-#define XHCI_PORT_RW1CS (PORT_PE | PORT_CSC | PORT_PEC | PORT_WRC | \
- PORT_OCC | PORT_RC | PORT_PLC | PORT_CEC)
-/*
- * Bit 16 is RW, and writing a '1' to it causes the link state control to be
- * latched in
- */
-#define XHCI_PORT_RW (PORT_LINK_STROBE)
-/*
- * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
- * bits 2, 24, 28:31
- */
-#define XHCI_PORT_RZ (BIT(2) | BIT(24) | (0xf<<28))
-
-/*
- * Given a port state, this function returns a value that would result in the
- * port being in the same state, if the value was written to the port status
- * control register.
- * Save Read Only (RO) bits and save read/write bits where
- * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
- * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
- */
-static u32 inline xhci_port_state_to_neutral(u32 state)
-{
- /* Save read-only status and port state */
- return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
-}
-
-static int xhci_hub_finish_port_detach(struct xhci_hcd *xhci, int port)
-{
- struct xhci_virtual_device *vdev, *temp;
- union xhci_trb trb;
- int ret;
-
- ret = xhci_wait_for_event(xhci, TRB_PORT_STATUS, &trb);
- if (ret)
- return ret;
-
- /* Tear-down any attached virtual devices */
- list_for_each_entry_safe(vdev, temp, &xhci->vdev_list, list)
- if (vdev->udev && vdev->udev->portnr == port)
- xhci_virtdev_detach(vdev);
-
- return 0;
-}
-
-static int xhci_hub_finish_port_reset(struct xhci_hcd *xhci, int port)
-{
- struct xhci_virtual_device *vdev;
- union xhci_trb trb;
- int ret;
-
- ret = xhci_wait_for_event(xhci, TRB_PORT_STATUS, &trb);
- if (ret)
- return ret;
-
- /* Reset any attached virtual devices */
- list_for_each_entry(vdev, &xhci->vdev_list, list)
- if (vdev->udev && vdev->udev->portnr == port)
- xhci_virtdev_reset(vdev);
-
- return 0;
-}
-
-void xhci_hub_port_power(struct xhci_hcd *xhci, int port,
- bool enable)
-{
- u32 reg = readl(xhci->usb_ports[port]);
-
- reg = xhci_port_state_to_neutral(reg);
- if (enable)
- reg |= PORT_POWER;
- else
- reg &= ~PORT_POWER;
- writel(reg, xhci->usb_ports[port]);
-}
-
-static __maybe_unused int xhci_hub_port_warm_reset(struct xhci_hcd *xhci, int port)
-{
- void __iomem *portsc = xhci->usb_ports[port];
- u32 reg;
-
- reg = xhci_port_state_to_neutral(readl(portsc));
- writel(reg | PORT_WR, portsc);
- return xhci_handshake(portsc, PORT_RESET, 0, 10 * SECOND/USECOND);
-}
-
-int xhci_hub_control(struct usb_device *dev, unsigned long pipe,
- void *buffer, int length, struct devrequest *req)
-{
- struct usb_host *host = dev->host;
- struct xhci_hcd *xhci = to_xhci_hcd(host);
- struct usb_root_hub_info *info;
- __le32 __iomem **port_array;
- int max_ports;
- void *srcptr = NULL;
- u8 tmpbuf[4];
- u16 typeReq;
- int len, port, srclen = 0;
- u32 reg;
-
- dev_dbg(xhci->dev, "%s req %u (%#x), type %u (%#x), value %u (%#x), index %u (%#x), length %u (%#x)\n",
- __func__, req->request, req->request,
- req->requesttype, req->requesttype,
- le16_to_cpu(req->value), le16_to_cpu(req->value),
- le16_to_cpu(req->index), le16_to_cpu(req->index),
- le16_to_cpu(req->length), le16_to_cpu(req->length));
-
- info = &xhci->usb_info;
- port_array = xhci->usb_ports;
- max_ports = xhci->num_usb_ports;
-
- typeReq = (req->requesttype << 8) | req->request;
- switch (typeReq) {
- case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
- dev_dbg(xhci->dev, "GetDeviceDescriptor %u\n",
- le16_to_cpu(req->value) >> 8);
-
- switch (le16_to_cpu(req->value) >> 8) {
- case USB_DT_DEVICE:
- srcptr = &info->device;
- srclen = info->device.bLength;
- break;
- case USB_DT_CONFIG:
- srcptr = &info->config;
- srclen = le16_to_cpu(info->config.wTotalLength);
- break;
- case USB_DT_STRING:
- switch (le16_to_cpu(req->value) & 0xff) {
- case 0: /* Language */
- srcptr = "\4\3\1\0";
- srclen = 4;
- break;
- case 1: /* Vendor: "barebox" */
- srcptr = "\20\3b\0a\0r\0e\0b\0o\0x\0";
- srclen = 16;
- break;
- case 2: /* Product: "USB 3.0 Root Hub" */
- srcptr = "\42\3U\0S\0B\0 \0\63\0.\0\60\0 \0R\0o\0o\0t\0 \0H\0u\0b";
- srclen = 34;
- break;
- default:
- dev_warn(xhci->dev, "unknown string descriptor %x\n",
- le16_to_cpu(req->value) >> 8);
- goto unknown;
- }
- break;
- }
- break;
- case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
- dev_dbg(xhci->dev, "SetDeviceConfiguration\n");
- /* Nothing to do */
- break;
- case DeviceOutRequest | USB_REQ_SET_ADDRESS:
- dev_dbg(xhci->dev, "SetDeviceAddress %u\n",
- le16_to_cpu(req->value));
-
- xhci->rootdev = le16_to_cpu(req->value);
- break;
- case GetHubDescriptor:
- dev_dbg(xhci->dev, "GetHubDescriptor %u\n",
- le16_to_cpu(req->value) >> 8);
-
- switch (le16_to_cpu(req->value) >> 8) {
- case USB_DT_HUB:
- srcptr = &info->hub;
- srclen = info->hub.bLength;
- break;
- default:
- dev_warn(xhci->dev, "unknown descriptor %x\n",
- le16_to_cpu(req->value) >> 8);
- goto unknown;
- }
- break;
- case GetHubStatus:
- dev_dbg(xhci->dev, "GetHubStatus\n");
-
- /* No power source, over-current reported per port */
- tmpbuf[0] = 0x00;
- tmpbuf[1] = 0x00;
- srcptr = tmpbuf;
- srclen = 2;
- break;
- case GetPortStatus:
- dev_dbg(xhci->dev, "GetPortStatus %u\n",
- le16_to_cpu(req->index));
-
- memset(tmpbuf, 0, 4);
-
- port = le16_to_cpu(req->index);
- if (!port || port > max_ports)
- goto unknown;
- port--;
-
- /* read PORTSC register */
- reg = readl(port_array[port]);
-
- if (reg & PORT_CONNECT) {
- tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
- if (DEV_LOWSPEED(reg))
- tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8;
- else if (DEV_HIGHSPEED(reg))
- tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
- }
- if (reg & PORT_PE)
- tmpbuf[0] |= USB_PORT_STAT_ENABLE;
- if (reg & PORT_OC)
- tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
- if (reg & PORT_RESET)
- tmpbuf[0] |= USB_PORT_STAT_RESET;
- /* USB 2.0 only */
- if ((reg & PORT_PLS_MASK) == XDEV_U3 && reg & PORT_POWER)
- tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
- /* USB 2.0 only */
- if (reg & PORT_POWER)
- tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
- if (reg & PORT_CSC)
- tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION;
- if (reg & PORT_PEC)
- tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
- if (reg & PORT_OCC)
- tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
- if (reg & PORT_RC)
- tmpbuf[2] |= USB_PORT_STAT_C_RESET;
- srcptr = tmpbuf;
- srclen = 4;
- break;
- case ClearPortFeature:
- dev_dbg(xhci->dev, "ClearPortFeature %u %u\n",
- le16_to_cpu(req->index), le16_to_cpu(req->value));
-
- port = le16_to_cpu(req->index);
- if (!port || port > max_ports)
- goto unknown;
- port--;
-
- reg = xhci_port_state_to_neutral(readl(port_array[port]));
-
- switch (le16_to_cpu(req->value)) {
- case USB_PORT_FEAT_ENABLE:
- reg &= ~PORT_PE;
- break;
- case USB_PORT_FEAT_POWER:
- reg &= ~PORT_POWER;
- break;
- case USB_PORT_FEAT_C_CONNECTION:
- reg |= PORT_CSC;
- break;
- case USB_PORT_FEAT_C_ENABLE:
- reg |= PORT_PEC;
- break;
- case USB_PORT_FEAT_C_OVER_CURRENT:
- reg |= PORT_OCC;
- break;
- case USB_PORT_FEAT_C_RESET:
- reg |= PORT_RC;
- break;
- default:
- dev_warn(xhci->dev, "unknown feature %u\n",
- le16_to_cpu(req->value));
- goto unknown;
- }
- writel(reg, port_array[port]);
- readl(port_array[port]);
-
- if ((reg & PORT_CONNECT) == 0 &&
- le16_to_cpu(req->value) == USB_PORT_FEAT_C_CONNECTION)
- xhci_hub_finish_port_detach(xhci, port + 1);
-
- break;
- case SetPortFeature:
- dev_dbg(xhci->dev, "SetPortFeature %u %u\n",
- le16_to_cpu(req->index), le16_to_cpu(req->value));
-
- port = le16_to_cpu(req->index);
- if (!port || port > max_ports)
- goto unknown;
- port--;
-
- reg = xhci_port_state_to_neutral(readl(port_array[port]));
-
- switch (le16_to_cpu(req->value)) {
- case USB_PORT_FEAT_POWER:
- reg |= PORT_POWER;
- break;
- case USB_PORT_FEAT_RESET:
- reg |= PORT_RESET;
- break;
- default:
- dev_warn(xhci->dev, "unknown feature %u\n",
- le16_to_cpu(req->value));
- goto unknown;
- }
- writel(reg, port_array[port]);
- readl(port_array[port]);
-
- if (le16_to_cpu(req->value) == USB_PORT_FEAT_RESET)
- xhci_hub_finish_port_reset(xhci, port + 1);
-
- break;
- default:
- dev_warn(xhci->dev, "unknown root hub request %u (%#x) type %u (%#x)\n",
- req->request, req->request,
- req->requesttype, req->requesttype);
- goto unknown;
- }
-
- len = min3(srclen, (int)le16_to_cpu(req->length), length);
- if (srcptr && len)
- memcpy(buffer, srcptr, len);
- dev->act_len = len;
- dev->status = 0;
-
- return 0;
-
-unknown:
- dev->act_len = 0;
- dev->status = USB_ST_STALLED;
- return -ENOTSUPP;
-}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
deleted file mode 100644
index 7a9315a0b6..0000000000
--- a/drivers/usb/host/xhci-pci.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * PCI driver for xHCI controllers
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <common.h>
-#include <init.h>
-#include <io.h>
-#include <linux/pci.h>
-#include <usb/xhci.h>
-
-static int xhci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- struct xhci_data data = {};
-
- pci_enable_device(pdev);
- pci_set_master(pdev);
-
- data.regs = pci_iomap(pdev, 0);
-
- return xhci_register(&pdev->dev, &data);
-}
-
-static DEFINE_PCI_DEVICE_TABLE(xhci_pci_tbl) = {
- /* handle any USB 3.0 xHCI controller */
- { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), },
- { },
-};
-
-static struct pci_driver xhci_pci_driver = {
- .name = "xHCI PCI",
- .id_table = xhci_pci_tbl,
- .probe = xhci_pci_probe,
-};
-device_pci_driver(xhci_pci_driver);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
deleted file mode 100644
index 84a14dd1fc..0000000000
--- a/drivers/usb/host/xhci.h
+++ /dev/null
@@ -1,1282 +0,0 @@
-/*
- * xHCI USB 3.0 Specification
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * Some code borrowed from the Linux xHCI driver
- * Author: Sarah Sharp
- * Copyright (C) 2008 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __XHCI_H
-#define __XHCI_H
-
-#include <io-64-nonatomic-lo-hi.h>
-
-#define NUM_COMMAND_TRBS 8
-#define NUM_TRANSFER_TRBS 8
-#define NUM_EVENT_SEGM 1 /* only one supported */
-#define NUM_EVENT_TRBS 16 /* minimum 16 TRBS */
-#define MIN_EP_RINGS 3 /* Control + Bulk In/Out */
-#define MAX_EP_RINGS (MIN_EP_RINGS * USB_MAXCHILDREN)
-
-/* Up to 16 ms to halt an HC */
-#define XHCI_MAX_HALT_USEC (16 * 1000)
-
-/* Command and Status registers offset from the Operational Registers address */
-#define XHCI_CMD_OFFSET 0x00
-#define XHCI_STS_OFFSET 0x04
-/* HCCPARAMS offset from PCI base address */
-#define XHCI_HCC_PARAMS_OFFSET 0x10
-/* xHCI PCI Configuration Registers */
-#define XHCI_SBRN_OFFSET 0x60
-
-/* Max number of USB devices for any host controller - limit in section 6.1 */
-#define MAX_HC_SLOTS 256
-/* Section 5.3.3 - MaxPorts */
-#define MAX_HC_PORTS 127
-
-/*
- * xHCI register interface.
- * This corresponds to the eXtensible Host Controller Interface (xHCI)
- * Revision 0.95 specification
- */
-
-/**
- * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
- * @hc_capbase: length of the capabilities register and HC version number
- * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
- * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
- * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
- * @hcc_params: HCCPARAMS - Capability Parameters
- * @db_off: DBOFF - Doorbell array offset
- * @run_regs_off: RTSOFF - Runtime register space offset
- */
-struct xhci_cap_regs {
- __le32 hc_capbase;
- __le32 hcs_params1;
- __le32 hcs_params2;
- __le32 hcs_params3;
- __le32 hcc_params;
- __le32 db_off;
- __le32 run_regs_off;
- /* Reserved up to (CAPLENGTH - 0x1C) */
-};
-
-/* hc_capbase bitmasks */
-/* bits 7:0 - how long is the Capabilities register */
-#define HC_LENGTH(p) ((p) & 0x00ff)
-/* bits 31:16 */
-#define HC_VERSION(p) (((p) >> 16) & 0xffff)
-
-/* HCSPARAMS1 - hcs_params1 - bitmasks */
-/* bits 0:7, Max Device Slots */
-#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
-#define HCS_SLOTS_MASK 0xff
-/* bits 8:18, Max Interrupters */
-#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
-/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
-#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
-
-/* HCSPARAMS2 - hcs_params2 - bitmasks */
-/* bits 0:3, frames or uframes that SW needs to queue transactions
- * ahead of the HW to meet periodic deadlines */
-#define HCS_IST(p) (((p) >> 0) & 0xf)
-/* bits 4:7, max number of Event Ring segments */
-#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
-/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
-/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
-#define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f)
-
-/* HCSPARAMS3 - hcs_params3 - bitmasks */
-/* bits 0:7, Max U1 to U0 latency for the roothub ports */
-#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
-/* bits 16:31, Max U2 to U0 latency for the roothub ports */
-#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
-
-/* HCCPARAMS - hcc_params - bitmasks */
-/* true: HC can use 64-bit address pointers */
-#define HCC_64BIT_ADDR(p) ((p) & BIT(0))
-/* true: HC can do bandwidth negotiation */
-#define HCC_BANDWIDTH_NEG(p) ((p) & BIT(1))
-/* true: HC uses 64-byte Device Context structures
- * FIXME 64-byte context structures aren't supported yet.
- */
-#define HCC_64BYTE_CONTEXT(p) ((p) & BIT(2))
-#define HCC_CTX_SIZE(p) (HCC_64BYTE_CONTEXT(p) ? 64 : 32)
-/* true: HC has port power switches */
-#define HCC_PPC(p) ((p) & BIT(3))
-/* true: HC has port indicators */
-#define HCC_INDICATOR(p) ((p) & BIT(4))
-/* true: HC has Light HC Reset Capability */
-#define HCC_LIGHT_RESET(p) ((p) & BIT(5))
-/* true: HC supports latency tolerance messaging */
-#define HCC_LTC(p) ((p) & BIT(6))
-/* true: no secondary Stream ID Support */
-#define HCC_NSS(p) ((p) & BIT(7))
-/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
-#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1))
-/* Extended Capabilities pointer from PCI base - section 5.3.6 */
-#define HCC_EXT_CAPS(p) (((p) >> 16) & 0xffff)
-
-/* db_off bitmask - bits 0:1 reserved */
-#define DBOFF_MASK (~0x3)
-
-/* run_regs_off bitmask - bits 0:4 reserved */
-#define RTSOFF_MASK (~0x1f)
-
-/* Number of registers per port */
-#define NUM_PORT_REGS 4
-
-#define PORTSC 0
-#define PORTPMSC 1
-#define PORTLI 2
-#define PORTHLPMC 3
-
-/**
- * struct xhci_op_regs - xHCI Host Controller Operational Registers.
- * @command: USBCMD - xHC command register
- * @status: USBSTS - xHC status register
- * @page_size: This indicates the page size that the host controller
- * supports. If bit n is set, the HC supports a page size
- * of 2^(n+12), up to a 128MB page size.
- * 4K is the minimum page size.
- * @cmd_ring: CRP - 64-bit Command Ring Pointer
- * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
- * @config_reg: CONFIG - Configure Register
- * @port_status_base: PORTSCn - base address for Port Status and Control
- * Each port has a Port Status and Control register,
- * followed by a Port Power Management Status and Control
- * register, a Port Link Info register, and a reserved
- * register.
- * @port_power_base: PORTPMSCn - base address for
- * Port Power Management Status and Control
- * @port_link_base: PORTLIn - base address for Port Link Info (current
- * Link PM state and control) for USB 2.1 and USB 3.0
- * devices.
- */
-struct xhci_op_regs {
- __le32 command;
- __le32 status;
- __le32 page_size;
- __le32 reserved1;
- __le32 reserved2;
- __le32 dev_notification;
- __le64 cmd_ring;
- /* rsvd: offset 0x20-2F */
- __le32 reserved3[4];
- __le64 dcbaa_ptr;
- __le32 config_reg;
- /* rsvd: offset 0x3C-3FF */
- __le32 reserved4[241];
- /* port 1 registers, which serve as a base address for other ports */
- __le32 port_status_base;
- __le32 port_power_base;
- __le32 port_link_base;
- __le32 reserved5;
- /* registers for ports 2-255 */
- __le32 reserved6[NUM_PORT_REGS*254];
-};
-
-/* USBCMD - USB command - command bitmasks */
-/* start/stop HC execution - do not write unless HC is halted*/
-#define CMD_RUN BIT(0)
-/* Reset HC - resets internal HC state machine and all registers (except
- * PCI config regs). HC does NOT drive a USB reset on the downstream ports.
- * The xHCI driver must reinitialize the xHC after setting this bit.
- */
-#define CMD_RESET BIT(1)
-/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
-#define CMD_EIE BIT(2)
-/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
-#define CMD_HSEIE BIT(3)
-/* bits 4:6 are reserved (and should be preserved on writes). */
-/* light reset (port status stays unchanged) - reset completed when this is 0 */
-#define CMD_LRESET BIT(7)
-/* host controller save/restore state. */
-#define CMD_CSS BIT(8)
-#define CMD_CRS BIT(9)
-/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
-#define CMD_EWE BIT(10)
-/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
- * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
- * '0' means the xHC can power it off if all ports are in the disconnect,
- * disabled, or powered-off state.
- */
-#define CMD_PM_INDEX BIT(11)
-/* bits 12:31 are reserved (and should be preserved on writes). */
-#define XHCI_IRQS (CMD_EIE | CMD_HSEIE | CMD_EWE)
-
-/* IMAN - Interrupt Management Register */
-#define IMAN_IE BIT(1)
-#define IMAN_IP BIT(0)
-
-/* USBSTS - USB status - status bitmasks */
-/* HC not running - set to 1 when run/stop bit is cleared. */
-#define STS_HALT BIT(0)
-/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
-#define STS_FATAL BIT(2)
-/* event interrupt - clear this prior to clearing any IP flags in IR set*/
-#define STS_EINT BIT(3)
-/* port change detect */
-#define STS_PORT BIT(4)
-/* bits 5:7 reserved and zeroed */
-/* save state status - '1' means xHC is saving state */
-#define STS_SAVE BIT(8)
-/* restore state status - '1' means xHC is restoring state */
-#define STS_RESTORE BIT(9)
-/* true: save or restore error */
-#define STS_SRE BIT(10)
-/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
-#define STS_CNR BIT(11)
-/* true: internal Host Controller Error - SW needs to reset and reinitialize */
-#define STS_HCE BIT(12)
-/* bits 13:31 reserved and should be preserved */
-
-/*
- * DNCTRL - Device Notification Control Register - dev_notification bitmasks
- * Generate a device notification event when the HC sees a transaction with a
- * notification type that matches a bit set in this bit field.
- */
-#define DEV_NOTE_MASK (0xffff)
-#define ENABLE_DEV_NOTE(x) BIT(x)
-/* Most of the device notification types should only be used for debug.
- * SW does need to pay attention to function wake notifications.
- */
-#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
-
-/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
-/* bit 0 is the command ring cycle state */
-/* stop ring operation after completion of the currently executing command */
-#define CMD_RING_PAUSE BIT(1)
-/* stop ring immediately - abort the currently executing command */
-#define CMD_RING_ABORT BIT(2)
-/* true: command ring is running */
-#define CMD_RING_RUNNING BIT(3)
-/* bits 4:5 reserved and should be preserved */
-/* Command Ring pointer - bit mask for the lower 32 bits. */
-#define CMD_RING_RSVD_BITS (0x3f)
-
-/* CONFIG - Configure Register - config_reg bitmasks */
-/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
-#define MAX_DEVS(p) ((p) & 0xff)
-/* bits 8:31 - reserved and should be preserved */
-
-/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
-/* true: device connected */
-#define PORT_CONNECT BIT(0)
-/* true: port enabled */
-#define PORT_PE BIT(1)
-/* bit 2 reserved and zeroed */
-/* true: port has an over-current condition */
-#define PORT_OC BIT(3)
-/* true: port reset signaling asserted */
-#define PORT_RESET BIT(4)
-/* Port Link State - bits 5:8
- * A read gives the current link PM state of the port,
- * a write with Link State Write Strobe set sets the link state.
- */
-#define PORT_PLS_MASK (0xf << 5)
-#define XDEV_U0 (0x0 << 5)
-#define XDEV_U2 (0x2 << 5)
-#define XDEV_U3 (0x3 << 5)
-#define XDEV_RESUME (0xf << 5)
-/* true: port has power (see HCC_PPC) */
-#define PORT_POWER BIT(9)
-/* bits 10:13 indicate device speed:
- * 0 - undefined speed - port hasn't be initialized by a reset yet
- * 1 - full speed
- * 2 - low speed
- * 3 - high speed
- * 4 - super speed
- * 5-15 reserved
- */
-#define DEV_SPEED_MASK (0xf << 10)
-#define XDEV_FS (0x1 << 10)
-#define XDEV_LS (0x2 << 10)
-#define XDEV_HS (0x3 << 10)
-#define XDEV_SS (0x4 << 10)
-#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
-#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
-#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
-#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
-#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
-/* Bits 20:23 in the Slot Context are the speed for the device */
-#define SLOT_SPEED_FS (XDEV_FS << 10)
-#define SLOT_SPEED_LS (XDEV_LS << 10)
-#define SLOT_SPEED_HS (XDEV_HS << 10)
-#define SLOT_SPEED_SS (XDEV_SS << 10)
-/* Port Indicator Control */
-#define PORT_LED_OFF (0 << 14)
-#define PORT_LED_AMBER (1 << 14)
-#define PORT_LED_GREEN (2 << 14)
-#define PORT_LED_MASK (3 << 14)
-/* Port Link State Write Strobe - set this when changing link state */
-#define PORT_LINK_STROBE BIT(16)
-/* true: connect status change */
-#define PORT_CSC BIT(17)
-/* true: port enable change */
-#define PORT_PEC BIT(18)
-/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
- * into an enabled state, and the device into the default state. A "warm" reset
- * also resets the link, forcing the device through the link training sequence.
- * SW can also look at the Port Reset register to see when warm reset is done.
- */
-#define PORT_WRC BIT(19)
-/* true: over-current change */
-#define PORT_OCC BIT(20)
-/* true: reset change - 1 to 0 transition of PORT_RESET */
-#define PORT_RC BIT(21)
-/* port link status change - set on some port link state transitions:
- * Transition Reason
- * ------------------------------------------------------------------------------
- * - U3 to Resume Wakeup signaling from a device
- * - Resume to Recovery to U0 USB 3.0 device resume
- * - Resume to U0 USB 2.0 device resume
- * - U3 to Recovery to U0 Software resume of USB 3.0 device complete
- * - U3 to U0 Software resume of USB 2.0 device complete
- * - U2 to U0 L1 resume of USB 2.1 device complete
- * - U0 to U0 (???) L1 entry rejection by USB 2.1 device
- * - U0 to disabled L1 entry error with USB 2.1 device
- * - Any state to inactive Error on USB 3.0 port
- */
-#define PORT_PLC BIT(22)
-/* port configure error change - port failed to configure its link partner */
-#define PORT_CEC BIT(23)
-/* Cold Attach Status - xHC can set this bit to report device attached during
- * Sx state. Warm port reset should be perfomed to clear this bit and move port
- * to connected state.
- */
-#define PORT_CAS BIT(24)
-/* wake on connect (enable) */
-#define PORT_WKCONN_E BIT(25)
-/* wake on disconnect (enable) */
-#define PORT_WKDISC_E BIT(26)
-/* wake on over-current (enable) */
-#define PORT_WKOC_E BIT(27)
-/* bits 28:29 reserved */
-/* true: device is removable - for USB 3.0 roothub emulation */
-#define PORT_DEV_REMOVE BIT(30)
-/* Initiate a warm port reset - complete when PORT_WRC is '1' */
-#define PORT_WR BIT(31)
-
-/* We mark duplicate entries with -1 */
-#define DUPLICATE_ENTRY ((u8)(-1))
-
-/* Port Power Management Status and Control - port_power_base bitmasks */
-/* Inactivity timer value for transitions into U1, in microseconds.
- * Timeout can be up to 127us. 0xFF means an infinite timeout.
- */
-#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
-#define PORT_U1_TIMEOUT_MASK 0xff
-/* Inactivity timer value for transitions into U2 */
-#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
-#define PORT_U2_TIMEOUT_MASK (0xff << 8)
-/* Bits 24:31 for port testing */
-
-/* USB2 Protocol PORTSPMSC */
-#define PORT_L1S_MASK 0x7
-#define PORT_L1S_SUCCESS 0x1
-#define PORT_RWE BIT(3)
-#define PORT_HIRD(p) (((p) & 0xf) << 4)
-#define PORT_HIRD_MASK (0xf << 4)
-#define PORT_L1DS_MASK (0xff << 8)
-#define PORT_L1DS(p) (((p) & 0xff) << 8)
-#define PORT_HLE BIT(16)
-
-/* USB2 Protocol PORTHLPMC */
-#define PORT_HIRDM(p) ((p) & 3)
-#define PORT_L1_TIMEOUT(p) (((p) & 0xff) << 2)
-#define PORT_BESLD(p) (((p) & 0xf) << 10)
-
-/* use 512 microseconds as USB2 LPM L1 default timeout. */
-#define XHCI_L1_TIMEOUT 512
-
-/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
- * Safe to use with mixed HIRD and BESL systems (host and device) and is used
- * by other operating systems.
- *
- * XHCI 1.0 errata 8/14/12 Table 13 notes:
- * "Software should choose xHC BESL/BESLD field values that do not violate a
- * device's resume latency requirements,
- * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
- * or not program values < '4' if BLC = '0' and a BESL device is attached.
- */
-#define XHCI_DEFAULT_BESL 4
-
-/**
- * struct xhci_intr_reg - Interrupt Register Set
- * @irq_pending: IMAN - Interrupt Management Register. Used to enable
- * interrupts and check for pending interrupts.
- * @irq_control: IMOD - Interrupt Moderation Register.
- * Used to throttle interrupts.
- * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
- * @erst_base: ERST base address.
- * @erst_dequeue: Event ring dequeue pointer.
- *
- * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
- * Ring Segment Table (ERST) associated with it. The event ring is comprised of
- * multiple segments of the same size. The HC places events on the ring and
- * "updates the Cycle bit in the TRBs to indicate to software the current
- * position of the Enqueue Pointer." The HCD (Linux) processes those events and
- * updates the dequeue pointer.
- */
-struct xhci_intr_reg {
- __le32 irq_pending;
- __le32 irq_control;
- __le32 erst_size;
- __le32 rsvd;
- __le64 erst_base;
- __le64 erst_dequeue;
-};
-
-/* irq_pending bitmasks */
-#define ER_IRQ_PENDING(p) ((p) & 0x1)
-/* bits 2:31 need to be preserved */
-/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
-#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
-#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
-#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
-
-/* irq_control bitmasks */
-/* Minimum interval between interrupts (in 250ns intervals). The interval
- * between interrupts will be longer if there are no events on the event ring.
- * Default is 4000 (1 ms).
- */
-#define ER_IRQ_INTERVAL_MASK 0xffff
-/* Counter used to count down the time to the next interrupt - HW use only */
-#define ER_IRQ_COUNTER_MASK (0xffff << 16)
-
-/* erst_size bitmasks */
-/* Preserve bits 16:31 of erst_size */
-#define ERST_SIZE_MASK (0xffff << 16)
-
-/* erst_dequeue bitmasks */
-/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
- * where the current dequeue pointer lies. This is an optional HW hint.
- */
-#define ERST_DESI_MASK 0x7
-/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
- * a work queue (or delayed service routine)?
- */
-#define ERST_EHB BIT(3)
-#define ERST_PTR_MASK 0xf
-
-/**
- * struct xhci_run_regs
- * @microframe_index: MFINDEX - current microframe number
- *
- * Section 5.5 Host Controller Runtime Registers:
- * "Software should read and write these registers using only Dword (32 bit)
- * or larger accesses"
- */
-struct xhci_run_regs {
- __le32 microframe_index;
- __le32 rsvd[7];
- struct xhci_intr_reg ir_set[128];
-};
-
-/**
- * struct doorbell_array
- *
- * Bits 0 - 7: Endpoint target
- * Bits 8 - 15: RsvdZ
- * Bits 16 - 31: Stream ID
- *
- * Section 5.6
- */
-struct xhci_doorbell_array {
- __le32 doorbell[256];
-};
-
-#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
-#define DB_VALUE_HOST 0x00000000
-
-/**
- * struct xhci_container_ctx
- * @type: Type of context. Used to calculated offsets to contained contexts.
- * @size: Size of the context data
- * @bytes: The raw context data given to HW
- * @dma: dma address of the bytes
- *
- * Represents either a Device or Input context. Holds a pointer to the raw
- * memory used for the context (bytes) and dma address of it (dma).
- */
-struct xhci_container_ctx {
- unsigned type;
-#define XHCI_CTX_TYPE_DEVICE 0x1
-#define XHCI_CTX_TYPE_INPUT 0x2
-
- int size;
-
- u8 *bytes;
- dma_addr_t dma;
-};
-
-/**
- * struct xhci_slot_ctx
- * @dev_info: Route string, device speed, hub info, and last valid endpoint
- * @dev_info2: Max exit latency for device number, root hub port number
- * @tt_info: tt_info is used to construct split transaction tokens
- * @dev_state: slot state and device address
- *
- * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
- * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
- * reserved at the end of the slot context for HC internal use.
- */
-struct xhci_slot_ctx {
- __le32 dev_info;
- __le32 dev_info2;
- __le32 tt_info;
- __le32 dev_state;
- /* offset 0x10 to 0x1f reserved for HC internal use */
- __le32 reserved[4];
-};
-
-/* dev_info bitmasks */
-/* Route String - 0:19 */
-#define ROUTE_STRING_MASK 0xfffff
-/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
-#define DEV_SPEED (0xf << 20)
-/* bit 24 reserved */
-/* Is this LS/FS device connected through a HS hub? - bit 25 */
-#define DEV_MTT BIT(25)
-/* Set if the device is a hub - bit 26 */
-#define DEV_HUB BIT(26)
-/* Index of the last valid endpoint context in this device context - 27:31 */
-#define LAST_CTX_MASK (0x1f << 27)
-#define LAST_CTX(p) ((p) << 27)
-#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
-#define SLOT_FLAG BIT(0)
-#define EP0_FLAG BIT(1)
-
-/* dev_info2 bitmasks */
-/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
-#define MAX_EXIT 0xffff
-/* Root hub port number that is needed to access the USB device */
-#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
-#define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff)
-/* Maximum number of ports under a hub device */
-#define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24)
-
-/* tt_info bitmasks */
-/*
- * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
- * The Slot ID of the hub that isolates the high speed signaling from
- * this low or full-speed device. '0' if attached to root hub port.
- */
-#define TT_SLOT 0xff
-/*
- * The number of the downstream facing port of the high-speed hub
- * '0' if the device is not low or full speed.
- */
-#define TT_PORT (0xff << 8)
-#define TT_THINK_TIME(p) (((p) & 0x3) << 16)
-
-/* dev_state bitmasks */
-/* USB device address - assigned by the HC */
-#define DEV_ADDR_MASK 0xff
-/* bits 8:26 reserved */
-/* Slot state */
-#define SLOT_STATE (0x1f << 27)
-#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
-
-#define SLOT_STATE_DISABLED 0x0
-#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
-#define SLOT_STATE_DEFAULT 0x1
-#define SLOT_STATE_ADDRESSED 0x2
-#define SLOT_STATE_CONFIGURED 0x3
-
-/**
- * struct xhci_ep_ctx
- * @ep_info: endpoint state, streams, mult, and interval information.
- * @ep_info2: information on endpoint type, max packet size, max burst size,
- * error count, and whether the HC will force an event for all
- * transactions.
- * @deq: 64-bit ring dequeue pointer address. If the endpoint only
- * defines one stream, this points to the endpoint transfer ring.
- * Otherwise, it points to a stream context array, which has a
- * ring pointer for each flow.
- * @tx_info: Average TRB lengths for the endpoint ring and
- * max payload within an Endpoint Service Interval Time (ESIT).
- *
- * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
- * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
- * reserved at the end of the endpoint context for HC internal use.
- */
-struct xhci_ep_ctx {
- __le32 ep_info;
- __le32 ep_info2;
- __le64 deq;
- __le32 tx_info;
- /* offset 0x14 - 0x1f reserved for HC internal use */
- __le32 reserved[3];
-};
-
-/* ep_info bitmasks */
-/*
- * Endpoint State - bits 0:2
- * 0 - disabled
- * 1 - running
- * 2 - halted due to halt condition - ok to manipulate endpoint ring
- * 3 - stopped
- * 4 - TRB error
- * 5-7 - reserved
- */
-#define EP_STATE_MASK 0xf
-#define EP_STATE_DISABLED 0x0
-#define EP_STATE_RUNNING 0x1
-#define EP_STATE_HALTED 0x2
-#define EP_STATE_STOPPED 0x3
-#define EP_STATE_ERROR 0x4
-/* Mult - Max number of burtst within an interval, in EP companion desc. */
-#define EP_MULT(p) (((p) & 0x3) << 8)
-#define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3)
-/* bits 10:14 are Max Primary Streams */
-/* bit 15 is Linear Stream Array */
-/* Interval - period between requests to an endpoint - 125u increments. */
-#define EP_INTERVAL(p) (((p) & 0xff) << 16)
-#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))
-#define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff)
-#define EP_MAXPSTREAMS_MASK (0x1f << 10)
-#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
-/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
-#define EP_HAS_LSA BIT(15)
-
-/* ep_info2 bitmasks */
-/*
- * Force Event - generate transfer events for all TRBs for this endpoint
- * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
- */
-#define FORCE_EVENT BIT(0)
-#define ERROR_COUNT(p) (((p) & 0x3) << 1)
-#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
-#define EP_TYPE(p) ((p) << 3)
-#define ISOC_OUT_EP 0x1
-#define BULK_OUT_EP 0x2
-#define INT_OUT_EP 0x3
-#define CTRL_EP 0x4
-#define ISOC_IN_EP 0x5
-#define BULK_IN_EP 0x6
-#define INT_IN_EP 0x7
-/* bit 6 reserved */
-/* bit 7 is Host Initiate Disable - for disabling stream selection */
-#define MAX_BURST(p) (((p) & 0xff) << 8)
-#define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff)
-#define MAX_PACKET(p) (((p) & 0xffff) << 16)
-#define MAX_PACKET_MASK (0xffff << 16)
-#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
-
-/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
- * USB2.0 spec 9.6.6.
- */
-#define GET_MAX_PACKET(p) ((p) & 0x7ff)
-
-/* tx_info bitmasks */
-#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
-#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
-#define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff)
-
-/* deq bitmasks */
-#define EP_CTX_CYCLE_MASK BIT(0)
-#define SCTX_DEQ_MASK (~0xfL)
-
-/**
- * struct xhci_input_control_context
- * Input control context; see section 6.2.5.
- *
- * @drop_context: set the bit of the endpoint context you want to disable
- * @add_context: set the bit of the endpoint context you want to enable
- */
-struct xhci_input_control_ctx {
- __le32 drop_flags;
- __le32 add_flags;
- __le32 rsvd2[6];
-};
-
-#define EP_IS_ADDED(ctrl_ctx, i) \
- (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
-#define EP_IS_DROPPED(ctrl_ctx, i) \
- (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
-
-/* drop context bitmasks */
-#define DROP_EP(x) BIT(x)
-/* add context bitmasks */
-#define ADD_EP(x) BIT(x)
-
-struct xhci_stream_ctx {
- /* 64-bit stream ring address, cycle state, and stream type */
- __le64 stream_ring;
- /* offset 0x14 - 0x1f reserved for HC internal use */
- __le32 reserved[2];
-};
-
-/* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
-#define SCT_FOR_CTX(p) (((p) & 0x7) << 1)
-/* Secondary stream array type, dequeue pointer is to a transfer ring */
-#define SCT_SEC_TR 0x0
-/* Primary stream array type, dequeue pointer is to a transfer ring */
-#define SCT_PRI_TR 0x1
-/* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
-#define SCT_SSA_8 0x2
-#define SCT_SSA_16 0x3
-#define SCT_SSA_32 0x4
-#define SCT_SSA_64 0x5
-#define SCT_SSA_128 0x6
-#define SCT_SSA_256 0x7
-
-#define SMALL_STREAM_ARRAY_SIZE 256
-#define MEDIUM_STREAM_ARRAY_SIZE 1024
-
-/* "Block" sizes in bytes the hardware uses for different device speeds.
- * The logic in this part of the hardware limits the number of bits the hardware
- * can use, so must represent bandwidth in a less precise manner to mimic what
- * the scheduler hardware computes.
- */
-#define FS_BLOCK 1
-#define HS_BLOCK 4
-#define SS_BLOCK 16
-#define DMI_BLOCK 32
-
-/* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
- * with each byte transferred. SuperSpeed devices have an initial overhead to
- * set up bursts. These are in blocks, see above. LS overhead has already been
- * translated into FS blocks.
- */
-#define DMI_OVERHEAD 8
-#define DMI_OVERHEAD_BURST 4
-#define SS_OVERHEAD 8
-#define SS_OVERHEAD_BURST 32
-#define HS_OVERHEAD 26
-#define FS_OVERHEAD 20
-#define LS_OVERHEAD 128
-
-/* The TTs need to claim roughly twice as much bandwidth (94 bytes per
- * microframe ~= 24Mbps) of the HS bus as the devices can actually use because
- * of overhead associated with split transfers crossing microframe boundaries.
- * 31 blocks is pure protocol overhead.
- */
-#define TT_HS_OVERHEAD (31 + 94)
-#define TT_DMI_OVERHEAD (25 + 12)
-
-/* Bandwidth limits in blocks */
-#define FS_BW_LIMIT 1285
-#define TT_BW_LIMIT 1320
-#define HS_BW_LIMIT 1607
-#define SS_BW_LIMIT_IN 3906
-#define DMI_BW_LIMIT_IN 3906
-#define SS_BW_LIMIT_OUT 3906
-#define DMI_BW_LIMIT_OUT 3906
-
-/* Percentage of bus bandwidth reserved for non-periodic transfers */
-#define FS_BW_RESERVED 10
-#define HS_BW_RESERVED 20
-#define SS_BW_RESERVED 10
-
-enum xhci_overhead_type {
- LS_OVERHEAD_TYPE = 0,
- FS_OVERHEAD_TYPE,
- HS_OVERHEAD_TYPE,
-};
-
-struct xhci_transfer_event {
- /* 64-bit buffer address, or immediate data */
- __le64 buffer;
- __le32 transfer_len;
- /* This field is interpreted differently based on the type of TRB */
- __le32 flags;
-};
-
-/* Transfer event TRB length bit mask */
-/* bits 0:23 */
-#define EVENT_TRB_LEN(p) ((p) & 0xffffff)
-
-/** Transfer Event bit fields **/
-#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
-
-/* Completion Code - only applicable for some types of TRBs */
-#define COMP_CODE_MASK (0xff << 24)
-#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
-#define COMP_SUCCESS 1
-/* Data Buffer Error */
-#define COMP_DB_ERR 2
-/* Babble Detected Error */
-#define COMP_BABBLE 3
-/* USB Transaction Error */
-#define COMP_TX_ERR 4
-/* TRB Error - some TRB field is invalid */
-#define COMP_TRB_ERR 5
-/* Stall Error - USB device is stalled */
-#define COMP_STALL 6
-/* Resource Error - HC doesn't have memory for that device configuration */
-#define COMP_ENOMEM 7
-/* Bandwidth Error - not enough room in schedule for this dev config */
-#define COMP_BW_ERR 8
-/* No Slots Available Error - HC ran out of device slots */
-#define COMP_ENOSLOTS 9
-/* Invalid Stream Type Error */
-#define COMP_STREAM_ERR 10
-/* Slot Not Enabled Error - doorbell rung for disabled device slot */
-#define COMP_EBADSLT 11
-/* Endpoint Not Enabled Error */
-#define COMP_EBADEP 12
-/* Short Packet */
-#define COMP_SHORT_TX 13
-/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
-#define COMP_UNDERRUN 14
-/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
-#define COMP_OVERRUN 15
-/* Virtual Function Event Ring Full Error */
-#define COMP_VF_FULL 16
-/* Parameter Error - Context parameter is invalid */
-#define COMP_EINVAL 17
-/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
-#define COMP_BW_OVER 18
-/* Context State Error - illegal context state transition requested */
-#define COMP_CTX_STATE 19
-/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
-#define COMP_PING_ERR 20
-/* Event Ring is full */
-#define COMP_ER_FULL 21
-/* Incompatible Device Error */
-#define COMP_DEV_ERR 22
-/* Missed Service Error - HC couldn't service an isoc ep within interval */
-#define COMP_MISSED_INT 23
-/* Successfully stopped command ring */
-#define COMP_CMD_STOP 24
-/* Successfully aborted current command and stopped command ring */
-#define COMP_CMD_ABORT 25
-/* Stopped - transfer was terminated by a stop endpoint command */
-#define COMP_STOP 26
-/* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */
-#define COMP_STOP_INVAL 27
-/* Control Abort Error - Debug Capability - control pipe aborted */
-#define COMP_DBG_ABORT 28
-/* Max Exit Latency Too Large Error */
-#define COMP_MEL_ERR 29
-/* TRB type 30 reserved */
-/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
-#define COMP_BUFF_OVER 31
-/* Event Lost Error - xHC has an "internal event overrun condition" */
-#define COMP_ISSUES 32
-/* Undefined Error - reported when other error codes don't apply */
-#define COMP_UNKNOWN 33
-/* Invalid Stream ID Error */
-#define COMP_STRID_ERR 34
-/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
-#define COMP_2ND_BW_ERR 35
-/* Split Transaction Error */
-#define COMP_SPLIT_ERR 36
-
-struct xhci_link_trb {
- /* 64-bit segment pointer*/
- __le64 segment_ptr;
- __le32 intr_target;
- __le32 control;
-};
-
-/* control bitfields */
-#define LINK_TOGGLE BIT(1)
-
-/* Command completion event TRB */
-struct xhci_event_cmd {
- /* Pointer to command TRB, or the value passed by the event data trb */
- __le64 cmd_trb;
- __le32 status;
- __le32 flags;
-};
-
-/* flags bitmasks */
-
-/* Address device - disable SetAddress */
-#define TRB_BSR BIT(9)
-enum xhci_setup_dev {
- SETUP_CONTEXT_ONLY,
- SETUP_CONTEXT_ADDRESS,
-};
-
-/* bits 16:23 are the virtual function ID */
-/* bits 24:31 are the slot ID */
-#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
-#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
-
-/* Configure Endpoint Command TRB - deconfigure */
-#define TRB_DC BIT(9)
-
-/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
-#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
-#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
-
-#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
-#define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23)
-#define LAST_EP_INDEX 30
-
-/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */
-#define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16))
-#define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16)
-#define SCT_FOR_TRB(p) (((p) << 1) & 0x7)
-
-/* Port Status Change Event TRB fields */
-/* Port ID - bits 31:24 */
-#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
-
-/* Normal TRB fields */
-/* transfer_len bitmasks - bits 0:16 */
-#define TRB_LEN(p) ((p) & 0x1ffff)
-/* Interrupter Target - which MSI-X vector to target the completion event at */
-#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
-#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
-#define TRB_TBC(p) (((p) & 0x3) << 7)
-#define TRB_TLBPC(p) (((p) & 0xf) << 16)
-
-/* Cycle bit - indicates TRB ownership by HC or HCD */
-#define TRB_CYCLE BIT(0)
-/*
- * Force next event data TRB to be evaluated before task switch.
- * Used to pass OS data back after a TD completes.
- */
-#define TRB_ENT BIT(1)
-/* Interrupt on short packet */
-#define TRB_ISP BIT(2)
-/* Set PCIe no snoop attribute */
-#define TRB_NO_SNOOP BIT(3)
-/* Chain multiple TRBs into a TD */
-#define TRB_CHAIN BIT(4)
-/* Interrupt on completion */
-#define TRB_IOC BIT(5)
-/* The buffer pointer contains immediate data */
-#define TRB_IDT BIT(6)
-
-/* Block Event Interrupt */
-#define TRB_BEI BIT(9)
-
-/* Control transfer TRB specific fields */
-#define TRB_DIR_IN BIT(16)
-#define TRB_TX_TYPE(p) ((p) << 16)
-#define TRB_DATA_OUT 2
-#define TRB_DATA_IN 3
-
-/* Isochronous TRB specific fields */
-#define TRB_SIA BIT(31)
-
-struct xhci_generic_trb {
- __le32 field[4];
-};
-
-union xhci_trb {
- struct xhci_link_trb link;
- struct xhci_transfer_event trans_event;
- struct xhci_event_cmd event_cmd;
- struct xhci_generic_trb generic;
-};
-
-/* TRB bit mask */
-#define TRB_TYPE_BITMASK (0xfc00)
-#define TRB_TYPE(p) ((p) << 10)
-#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
-/* TRB type IDs */
-/* bulk, interrupt, isoc scatter/gather, and control data stage */
-#define TRB_NORMAL 1
-/* setup stage for control transfers */
-#define TRB_SETUP 2
-/* data stage for control transfers */
-#define TRB_DATA 3
-/* status stage for control transfers */
-#define TRB_STATUS 4
-/* isoc transfers */
-#define TRB_ISOC 5
-/* TRB for linking ring segments */
-#define TRB_LINK 6
-#define TRB_EVENT_DATA 7
-/* Transfer Ring No-op (not for the command ring) */
-#define TRB_TR_NOOP 8
-/* Command TRBs */
-/* Enable Slot Command */
-#define TRB_ENABLE_SLOT 9
-/* Disable Slot Command */
-#define TRB_DISABLE_SLOT 10
-/* Address Device Command */
-#define TRB_ADDR_DEV 11
-/* Configure Endpoint Command */
-#define TRB_CONFIG_EP 12
-/* Evaluate Context Command */
-#define TRB_EVAL_CONTEXT 13
-/* Reset Endpoint Command */
-#define TRB_RESET_EP 14
-/* Stop Transfer Ring Command */
-#define TRB_STOP_RING 15
-/* Set Transfer Ring Dequeue Pointer Command */
-#define TRB_SET_DEQ 16
-/* Reset Device Command */
-#define TRB_RESET_DEV 17
-/* Force Event Command (opt) */
-#define TRB_FORCE_EVENT 18
-/* Negotiate Bandwidth Command (opt) */
-#define TRB_NEG_BANDWIDTH 19
-/* Set Latency Tolerance Value Command (opt) */
-#define TRB_SET_LT 20
-/* Get port bandwidth Command */
-#define TRB_GET_BW 21
-/* Force Header Command - generate a transaction or link management packet */
-#define TRB_FORCE_HEADER 22
-/* No-op Command - not for transfer rings */
-#define TRB_CMD_NOOP 23
-/* TRB IDs 24-31 reserved */
-/* Event TRBS */
-/* Transfer Event */
-#define TRB_TRANSFER 32
-/* Command Completion Event */
-#define TRB_COMPLETION 33
-/* Port Status Change Event */
-#define TRB_PORT_STATUS 34
-/* Bandwidth Request Event (opt) */
-#define TRB_BANDWIDTH_EVENT 35
-/* Doorbell Event (opt) */
-#define TRB_DOORBELL 36
-/* Host Controller Event */
-#define TRB_HC_EVENT 37
-/* Device Notification Event - device sent function wake notification */
-#define TRB_DEV_NOTE 38
-/* MFINDEX Wrap Event - microframe counter wrapped */
-#define TRB_MFINDEX_WRAP 39
-/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
-
-/* Nec vendor-specific command completion event. */
-#define TRB_NEC_CMD_COMP 48
-/* Get NEC firmware revision. */
-#define TRB_NEC_GET_FW 49
-
-#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
-/* Above, but for __le32 types -- can avoid work by swapping constants: */
-#define TRB_TYPE_LINK_LE32(x) \
- (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == cpu_to_le32(TRB_TYPE(TRB_LINK)))
-#define TRB_TYPE_NOOP_LE32(x) \
- (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
-
-#define NEC_FW_MINOR(p) (((p) >> 0) & 0xff)
-#define NEC_FW_MAJOR(p) (((p) >> 8) & 0xff)
-
-/*
- * TRBS_PER_SEGMENT must be a multiple of 4,
- * since the command ring is 64-byte aligned.
- * It must also be greater than 16.
- */
-#define TRBS_PER_SEGMENT 64
-/* Allow two commands + a link TRB, along with any reserved command TRBs */
-#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
-#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT * 16)
-#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE))
-/* TRB buffer pointers can't cross 64KB boundaries */
-#define TRB_MAX_BUFF_SHIFT 16
-#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
-
-/* xHCI command default timeout value */
-#define XHCI_CMD_DEFAULT_TIMEOUT (5 * SECOND)
-
-struct xhci_erst_entry {
- /* 64-bit event ring segment address */
- __le64 seg_addr;
- __le32 seg_size;
- /* Set to zero */
- __le32 rsvd;
-};
-
-/*
- * Each segment table entry is 4*32bits long. 1K seems like an ok size:
- * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
- * meaning 64 ring segments.
- * Initial allocated size of the ERST, in number of entries */
-#define ERST_NUM_SEGS 1
-/* Initial allocated size of the ERST, in number of entries */
-#define ERST_SIZE 64
-/* Initial number of event segment rings allocated */
-#define ERST_ENTRIES 1
-/* Poll every 60 seconds */
-#define POLL_TIMEOUT 60
-/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
-#define XHCI_STOP_EP_CMD_TIMEOUT 5
-/* XXX: Make these module parameters */
-
-/*
- * It can take up to 20 ms to transition from RExit to U0 on the
- * Intel Lynx Point LP xHCI host.
- */
-#define XHCI_MAX_REXIT_TIMEOUT (20 * MSECONDS)
-
-#define XHCI_MAX_EXT_CAPS 50
-
-#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
-#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
-#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
-
-/* Extended capability register fields */
-#define XHCI_EXT_CAPS_ID(p) (((p)>>0)&0xff)
-#define XHCI_EXT_CAPS_NEXT(p) (((p)>>8)&0xff)
-#define XHCI_EXT_CAPS_VAL(p) ((p)>>16)
-/* Extended capability IDs - ID 0 reserved */
-#define XHCI_EXT_CAPS_LEGACY 1
-#define XHCI_EXT_CAPS_PROTOCOL 2
-#define XHCI_EXT_CAPS_PM 3
-#define XHCI_EXT_CAPS_VIRT 4
-#define XHCI_EXT_CAPS_ROUTE 5
-/* IDs 6-9 reserved */
-#define XHCI_EXT_CAPS_DEBUG 10
-/* USB Legacy Support Capability - section 7.1.1 */
-#define XHCI_HC_BIOS_OWNED BIT(16)
-#define XHCI_HC_OS_OWNED BIT(24)
-
-/* USB Legacy Support Capability - section 7.1.1 */
-/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
-#define XHCI_LEGACY_SUPPORT_OFFSET 0x00
-
-/* USB Legacy Support Control and Status Register - section 7.1.2 */
-/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
-#define XHCI_LEGACY_CONTROL_OFFSET 0x04
-/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
-#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17))
-#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29)
-
-/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
-#define XHCI_L1C BIT(16)
-
-/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
-#define XHCI_HLC BIT(19)
-#define XHCI_BLC BIT(20)
-
-/*
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers. Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
- */
-static inline u64 xhci_read_64(__le64 __iomem *regs)
-{
- return lo_hi_readq(regs);
-}
-static inline void xhci_write_64(const u64 val, __le64 __iomem *regs)
-{
- lo_hi_writeq(val, regs);
-}
-
-/*
- * Barebox xHCI housekeeping structs
- */
-
-enum xhci_ring_type {
- TYPE_CTRL = 0,
- TYPE_ISOC,
- TYPE_BULK,
- TYPE_INTR,
- TYPE_STREAM,
- TYPE_COMMAND,
- TYPE_EVENT,
-};
-
-struct xhci_ring {
- struct list_head list;
- union xhci_trb *trbs;
- union xhci_trb *enqueue;
- union xhci_trb *dequeue;
- enum xhci_ring_type type;
- int num_trbs;
- int cycle_state;
-};
-
-struct xhci_virtual_device {
- struct list_head list;
- struct usb_device *udev;
- void *dma;
- size_t dma_size;
- int slot_id;
- struct xhci_ring *ep[USB_MAXENDPOINTS];
- struct xhci_container_ctx *in_ctx;
- struct xhci_container_ctx *out_ctx;
-};
-
-struct usb_root_hub_info {
- struct usb_hub_descriptor hub;
- struct usb_device_descriptor device;
- struct usb_config_descriptor config;
- struct usb_interface_descriptor interface;
- struct usb_endpoint_descriptor endpoint;
-} __attribute__ ((packed));
-
-struct xhci_hcd {
- struct usb_host host;
- struct device_d *dev;
- struct xhci_cap_regs __iomem *cap_regs;
- struct xhci_op_regs __iomem *op_regs;
- struct xhci_run_regs __iomem *run_regs;
- struct xhci_doorbell_array __iomem *dba;
- struct xhci_intr_reg __iomem *ir_set;
- /* Cached register copies of read-only HC data */
- u32 hcs_params1;
- u32 hcs_params2;
- u32 hcs_params3;
- u32 hcc_capbase;
- u32 hcc_params;
- u16 hci_version;
- int max_slots;
- int num_sp;
- int page_size;
- int page_shift;
- size_t dma_size;
- __le64 *dcbaa;
- void *sp;
- __le64 *sp_array;
- struct xhci_ring cmd_ring;
- struct xhci_ring event_ring;
- struct xhci_ring *rings;
- struct list_head rings_list;
- struct xhci_erst_entry *event_erst;
- u8 *port_array;
- int rootdev;
- struct list_head vdev_list;
- u32 *ext_caps;
- unsigned int num_ext_caps;
- __le32 __iomem **usb_ports;
- unsigned int num_usb_ports;
- struct usb_root_hub_info usb_info;
-};
-
-#define to_xhci_hcd(_h) \
- container_of(_h, struct xhci_hcd, host)
-
-int xhci_handshake(void __iomem *p, u32 mask, u32 done, int usec);
-
-int xhci_issue_command(struct xhci_hcd *xhci, union xhci_trb *trb);
-int xhci_wait_for_event(struct xhci_hcd *xhci, u8 type, union xhci_trb *trb);
-
-int xhci_virtdev_reset(struct xhci_virtual_device *vdev);
-int xhci_virtdev_detach(struct xhci_virtual_device *vdev);
-
-int xhci_hub_setup_ports(struct xhci_hcd *xhci);
-void xhci_hub_port_power(struct xhci_hcd *xhci, int port, bool enable);
-int xhci_hub_control(struct usb_device *dev, unsigned long pipe,
- void *buffer, int length, struct devrequest *req);
-
-static inline void xhci_print_trb(struct xhci_hcd *xhci,
- union xhci_trb *trb, const char *desc)
-{
- dev_dbg(xhci->dev, "%s [%08x %08x %08x %08x]\n", desc,
- trb->generic.field[0], trb->generic.field[1],
- trb->generic.field[2], trb->generic.field[3]);
-}
-
-#endif
--
2.26.0.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-03-25 12:31 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 12:30 [PATCH 00/24] USB3 support Sascha Hauer
2020-03-25 12:30 ` [PATCH 01/24] usb: hub: Make debugging output more consistent Sascha Hauer
2020-03-25 12:30 ` [PATCH 02/24] usb: hub: do not reset devices twice Sascha Hauer
2020-03-25 12:30 ` [PATCH 03/24] usb: hub: let usb_scan_port() return void Sascha Hauer
2020-03-25 12:30 ` [PATCH 04/24] usb: Remove hack from the early days Sascha Hauer
2020-03-25 12:30 ` [PATCH 05/24] usb: Pass portstatus/portchange to usb_hub_port_connect_change() Sascha Hauer
2020-03-25 12:30 ` [PATCH 06/24] usb: hub: Do not power-cycle usb devices on init Sascha Hauer
2020-03-25 12:30 ` [PATCH 07/24] usb: Make driver_info const Sascha Hauer
2020-03-25 12:30 ` [PATCH 08/24] usb: Set new USB device name earlier Sascha Hauer
2020-03-25 12:30 ` [PATCH 09/24] usb: Use dev_* Sascha Hauer
2020-03-25 12:30 ` [PATCH 10/24] usb: hub: Parse and save TT details from device descriptor Sascha Hauer
2020-03-25 12:30 ` [PATCH 11/24] usb: host: make init hook optional Sascha Hauer
2020-03-25 12:30 ` [PATCH 12/24] usb: support set hub depth request for USB 3.0 hubs Sascha Hauer
2020-03-25 12:31 ` [PATCH 13/24] usb: Assign dev_index once Sascha Hauer
2020-03-25 12:31 ` [PATCH 14/24] usb: remove unnecessary variable Sascha Hauer
2020-03-25 12:31 ` [PATCH 15/24] usb: net: Allocate rx buffer dynamically Sascha Hauer
2020-03-25 14:18 ` Jules Maselbas
2020-03-26 6:22 ` Sascha Hauer
2020-03-25 12:31 ` [PATCH 16/24] usb: net: Allocate tx " Sascha Hauer
2020-03-25 12:31 ` [PATCH 17/24] net: usb: add hook for link changes Sascha Hauer
2020-03-25 12:31 ` [PATCH 18/24] usb: net: Add support for the Asix AX88179 Sascha Hauer
2020-03-25 12:31 ` [PATCH 19/24] usb: factor out a usb_setup_descriptor() function Sascha Hauer
2020-03-25 12:31 ` [PATCH 20/24] usb: hub: Translate USB 3.0 hub port status into old version Sascha Hauer
2020-03-25 12:31 ` [PATCH 21/24] usb: Add super speed support Sascha Hauer
2020-03-25 12:31 ` [PATCH 22/24] usb: hub: When no connection came up remove from scanning list Sascha Hauer
2020-03-25 12:31 ` Sascha Hauer [this message]
2020-03-25 12:31 ` [PATCH 24/24] usb: Add U-Boot xhci driver Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200325123111.9612-24-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox