From: Sascha Hauer <s.hauer@pengutronix.de>
To: Ahmad Fatoum <ahmad@a3f.at>
Cc: barebox@lists.infradead.org, Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: Re: [PATCH 08/12] video: backlight-pwm: use new pwm_apply_state API
Date: Tue, 31 Mar 2020 08:10:06 +0200 [thread overview]
Message-ID: <20200331061006.GG27288@pengutronix.de> (raw)
In-Reply-To: <20200330145717.667403-9-ahmad@a3f.at>
On Mon, Mar 30, 2020 at 04:57:13PM +0200, Ahmad Fatoum wrote:
> From: Ahmad Fatoum <a.fatoum@pengutronix.de>
>
> Use pwm_apply_state we can avoid having to store PWM state in the
> instance structure and in future we have an easy way to support new
> parameters like inverted duty cycle.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> drivers/video/backlight-pwm.c | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/video/backlight-pwm.c b/drivers/video/backlight-pwm.c
> index 9111a42d7544..8b6494dac929 100644
> --- a/drivers/video/backlight-pwm.c
> +++ b/drivers/video/backlight-pwm.c
> @@ -33,7 +33,6 @@ struct pwm_backlight {
> struct backlight_device backlight;
> struct pwm_device *pwm;
> struct regulator *power;
> - uint32_t period;
> unsigned int *levels;
> int enable_gpio;
> int enable_active_high;
> @@ -91,13 +90,16 @@ static int backlight_pwm_disable(struct pwm_backlight *pwm_backlight)
> static int compute_duty_cycle(struct pwm_backlight *pwm_backlight, int brightness)
> {
> int duty_cycle;
> + struct pwm_state state;
> +
> + pwm_get_state(pwm_backlight->pwm, &state);
>
> if (pwm_backlight->levels)
> duty_cycle = pwm_backlight->levels[brightness];
> else
> duty_cycle = brightness;
>
> - return duty_cycle * pwm_backlight->period / pwm_backlight->scale;
> + return duty_cycle * state.period_ns / pwm_backlight->scale;
> }
>
> static int backlight_pwm_set(struct backlight_device *backlight,
> @@ -105,9 +107,11 @@ static int backlight_pwm_set(struct backlight_device *backlight,
> {
> struct pwm_backlight *pwm_backlight = container_of(backlight,
> struct pwm_backlight, backlight);
> + struct pwm_state state;
>
> - pwm_config(pwm_backlight->pwm, compute_duty_cycle(pwm_backlight, brightness),
> - pwm_backlight->period);
> + pwm_get_state(pwm_backlight->pwm, &state);
You read the current pwm state here...
> + state.duty_ns = compute_duty_cycle(pwm_backlight, brightness);
and once again in compute_duty_cycle(). I think it would be nicer to
reorganize this a bit, maybe pass the state to compute_duty_cycle.
> + pwm_apply_state(pwm_backlight->pwm, &state);
>
> if (brightness)
> return backlight_pwm_enable(pwm_backlight);
I would assume that if you switch to the pwm_apply_state API then you do
it entirely. backlight_pwm_enable() still uses the old API to enable the
PWM.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-03-31 6:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-30 14:57 [PATCH 00/12] PWM: add support for ->apply, polarity and STM32 Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 01/12] led: pwm: always initialize PWM LEDs as inactive Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 02/12] PWM: core: remove FLAG_ENABLED Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 03/12] PWM: core: remove ineffectual pwm_{set,get}_duty_cycle Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 04/12] PWM: core: group PWM state into new struct pwm_state Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 05/12] PWM: core: remove old PWM API in favor of Linux ->apply Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 06/12] PWM: core: retire pwm_set_period Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 07/12] PWM: core: apply initial state in of_pwm_request Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 08/12] video: backlight-pwm: use new pwm_apply_state API Ahmad Fatoum
2020-03-31 6:10 ` Sascha Hauer [this message]
2020-03-31 6:54 ` Ahmad Fatoum
2020-03-31 7:49 ` Sascha Hauer
2020-03-30 14:57 ` [PATCH 09/12] led: pwm: " Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 10/12] PWM: core: add apply API support for polarity Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 11/12] of: introduce of_property_count_elems_of_size Ahmad Fatoum
2020-03-30 14:57 ` [PATCH 12/12] PWM: add support for STM32 Ahmad Fatoum
2020-03-31 6:41 ` Sascha Hauer
2020-03-31 6:49 ` Ahmad Fatoum
2020-03-31 7:49 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200331061006.GG27288@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=ahmad@a3f.at \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox