From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 00/21] clk: at91: sync with Linux v5.6
Date: Mon, 13 Apr 2020 09:51:43 +0200 [thread overview]
Message-ID: <20200413075204.17544-1-a.fatoum@pengutronix.de> (raw)
During a bug hunt that ultimately turned out unrelated to the state
of the barebox at91 clk driver, I synchronized its state with Linux v5.6.
This imports it, after cleanup. It refactors other code a bit to reduce
the diff for the final port and future ones. What we gain from this:
- bug fixes that have been posted upstream in the meanwhile
- sam9x60 (new Microchip ARM926EJ-S) clock support
- sama5d2 audio PLL
- Some more helpers to make code porting slightly easier
- SPDX-License-Identifiers, not only for at91 clks, but for all of
drivers/clk
Cheers,
Ahmad Fatoum (17):
mfd: syscon: enable specified clocks on syscon_base_lookup_by_phandle
mfd: syscon: refactor of_syscon_register compatible check
mfd: syscon: implement device_node_to_regmap
regmap: retire of_node_to_regmap in favor of device_node_to_regmap
ARM: include: remove unused <asm/processor.h>
treewide: use cpu_relax() where appropriate
of: port Linux of_get_compatible_child helper
clk: implement clk_register_fixed_rate
clk: add clk_unregister stub
include: linux/kernel.h: port DIV_ROUND_CLOSEST_ULL definition
clk: migrate to SPDX-License-Identifier use
clk: at91: delete no-longer required DT compat code
clk: at91: compile dt-compat for all platforms that require it
clk: at91: add __init marker where appropriate
clk: at91: add sama5d2 audio PLL support
clk: at91: port Linux v5.6 SAM9X60 (new ARM926EJ-S) clock support
clk: at91: sckc: fix off-by-1000 in udelay()
Alexandre Belloni (2):
clk: at91: fix masterck name
clk: at91: fix possible deadlock
Eugen Hristev (1):
clk: at91: allow 24 Mhz clock as input for PLL
Stephen Boyd (1):
clk: at91: Mark struct clk_range as const
arch/arm/include/asm/processor.h | 131 ------
arch/arm/mach-at91/Kconfig | 19 +
arch/arm/mach-omap/omap4_rom_usb.c | 6 +-
drivers/base/regmap/regmap-mmio.c | 5 +-
drivers/base/regmap/regmap.c | 20 -
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/at91/Makefile | 15 +-
drivers/clk/at91/at91sam9260.c | 16 +-
drivers/clk/at91/at91sam9rl.c | 4 +-
drivers/clk/at91/at91sam9x5.c | 18 +-
drivers/clk/at91/clk-audio-pll.c | 512 ++++++++++++++++++++++++
drivers/clk/at91/clk-generated.c | 68 ++--
drivers/clk/at91/clk-h32mx.c | 9 +-
drivers/clk/at91/clk-i2s-mux.c | 87 ++++
drivers/clk/at91/clk-main.c | 25 +-
drivers/clk/at91/clk-master.c | 16 +-
drivers/clk/at91/clk-peripheral.c | 54 +--
drivers/clk/at91/clk-pll.c | 21 +-
drivers/clk/at91/clk-plldiv.c | 9 +-
drivers/clk/at91/clk-programmable.c | 53 ++-
drivers/clk/at91/clk-sam9x60-pll.c | 322 +++++++++++++++
drivers/clk/at91/clk-slow.c | 7 +-
drivers/clk/at91/clk-smd.c | 9 +-
drivers/clk/at91/clk-system.c | 9 +-
drivers/clk/at91/clk-usb.c | 44 +-
drivers/clk/at91/clk-utmi.c | 7 +-
drivers/clk/at91/dt-compat.c | 140 +------
drivers/clk/at91/pmc.c | 19 +-
drivers/clk/at91/pmc.h | 91 +++--
drivers/clk/at91/sam9x60.c | 313 +++++++++++++++
drivers/clk/at91/sama5d2.c | 79 +++-
drivers/clk/at91/sama5d4.c | 14 +-
drivers/clk/at91/sckc.c | 387 +++++++++++-------
drivers/clk/clk-ar933x.c | 13 +-
drivers/clk/clk-ar9344.c | 10 +-
drivers/clk/clk-composite.c | 13 +-
drivers/clk/clk-conf.c | 5 +-
drivers/clk/clk-divider.c | 12 +-
drivers/clk/clk-fixed-factor.c | 12 +-
drivers/clk/clk-fixed.c | 28 +-
drivers/clk/clk-fractional-divider.c | 5 +-
drivers/clk/clk-gate-shared.c | 12 +-
drivers/clk/clk-gate.c | 12 +-
drivers/clk/clk-gpio.c | 12 +-
drivers/clk/clk-mux.c | 12 +-
drivers/clk/clk-qoric.c | 5 +-
drivers/clk/clk.c | 12 +-
drivers/clk/clkdev.c | 5 +-
drivers/clk/imx/Makefile | 1 +
drivers/clk/imx/clk-cpu.c | 8 +-
drivers/clk/imx/clk-frac-pll.c | 8 +-
drivers/clk/imx/clk-gate-exclusive.c | 5 +-
drivers/clk/imx/clk-gate2.c | 12 +-
drivers/clk/imx/clk-imx1.c | 14 +-
drivers/clk/imx/clk-imx21.c | 15 +-
drivers/clk/imx/clk-imx25.c | 15 +-
drivers/clk/imx/clk-imx27.c | 1 +
drivers/clk/imx/clk-imx31.c | 14 +-
drivers/clk/imx/clk-imx35.c | 6 +-
drivers/clk/imx/clk-imx5.c | 6 +-
drivers/clk/imx/clk-imx6.c | 8 +-
drivers/clk/imx/clk-imx6sl.c | 8 +-
drivers/clk/imx/clk-imx6sx.c | 8 +-
drivers/clk/imx/clk-imx6ul.c | 8 +-
drivers/clk/imx/clk-imx7.c | 10 +-
drivers/clk/imx/clk-pfd.c | 8 +-
drivers/clk/imx/clk-pllv1.c | 14 +-
drivers/clk/imx/clk-pllv2.c | 14 +-
drivers/clk/imx/clk-pllv3.c | 14 +-
drivers/clk/imx/clk-sccg-pll.c | 8 +-
drivers/clk/imx/clk-vf610.c | 7 +-
drivers/clk/imx/clk.c | 1 +
drivers/clk/imx/clk.h | 1 +
drivers/clk/mvebu/Makefile | 1 +
drivers/clk/mvebu/armada-370.c | 5 +-
drivers/clk/mvebu/armada-38x.c | 5 +-
drivers/clk/mvebu/armada-xp.c | 5 +-
drivers/clk/mvebu/common.c | 5 +-
drivers/clk/mvebu/common.h | 5 +-
drivers/clk/mvebu/corediv.c | 5 +-
drivers/clk/mvebu/dove.c | 5 +-
drivers/clk/mvebu/kirkwood.c | 5 +-
drivers/clk/mxs/Makefile | 1 +
drivers/clk/mxs/clk-div.c | 8 +-
drivers/clk/mxs/clk-frac.c | 8 +-
drivers/clk/mxs/clk-imx23.c | 14 +-
drivers/clk/mxs/clk-imx28.c | 14 +-
drivers/clk/mxs/clk-lcdif.c | 1 +
drivers/clk/mxs/clk-pll.c | 8 +-
drivers/clk/mxs/clk-ref.c | 8 +-
drivers/clk/mxs/clk.h | 1 +
drivers/clk/rockchip/Makefile | 1 +
drivers/clk/rockchip/clk-cpu.c | 5 +-
drivers/clk/rockchip/clk-pll.c | 11 +-
drivers/clk/rockchip/clk-rk3188.c | 11 +-
drivers/clk/rockchip/clk-rk3288.c | 11 +-
drivers/clk/rockchip/clk.c | 11 +-
drivers/clk/rockchip/clk.h | 11 +-
drivers/clk/socfpga/Makefile | 1 +
drivers/clk/socfpga/clk-gate-a10.c | 13 +-
drivers/clk/socfpga/clk-periph-a10.c | 13 +-
drivers/clk/socfpga/clk-pll-a10.c | 13 +-
drivers/clk/socfpga/clk.c | 10 +-
drivers/clk/socfpga/clk.h | 11 +-
drivers/clk/tegra/Makefile | 1 +
drivers/clk/tegra/clk-divider.c | 13 +-
drivers/clk/tegra/clk-periph.c | 13 +-
drivers/clk/tegra/clk-pll-out.c | 13 +-
drivers/clk/tegra/clk-pll.c | 13 +-
drivers/clk/tegra/clk-tegra124.c | 13 +-
drivers/clk/tegra/clk-tegra20.c | 13 +-
drivers/clk/tegra/clk-tegra30.c | 13 +-
drivers/clk/tegra/clk.c | 13 +-
drivers/clk/tegra/clk.h | 13 +-
drivers/clk/vexpress/Makefile | 1 +
drivers/clk/vexpress/clk-sp810.c | 10 +-
drivers/clk/vexpress/clk-vexpress-osc.c | 11 +-
drivers/clk/zynq/Makefile | 1 +
drivers/clk/zynq/clkc.c | 13 +-
drivers/clk/zynqmp/Makefile | 1 +
drivers/mfd/syscon.c | 36 +-
drivers/mtd/nand/nand_denali.c | 8 +-
drivers/of/base.c | 25 ++
include/linux/barebox-wrapper.h | 2 +
include/linux/clk.h | 13 +-
include/linux/clk/at91_pmc.h | 59 ++-
include/linux/kernel.h | 13 +
include/mfd/syscon.h | 5 +
include/of.h | 8 +
include/regmap.h | 3 +-
131 files changed, 2110 insertions(+), 1356 deletions(-)
delete mode 100644 arch/arm/include/asm/processor.h
create mode 100644 drivers/clk/at91/clk-audio-pll.c
create mode 100644 drivers/clk/at91/clk-i2s-mux.c
create mode 100644 drivers/clk/at91/clk-sam9x60-pll.c
create mode 100644 drivers/clk/at91/sam9x60.c
--
2.26.0.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2020-04-13 7:52 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-13 7:51 Ahmad Fatoum [this message]
2020-04-13 7:51 ` [PATCH 01/21] mfd: syscon: enable specified clocks on syscon_base_lookup_by_phandle Ahmad Fatoum
2020-04-15 9:15 ` Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 02/21] mfd: syscon: refactor of_syscon_register compatible check Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 03/21] mfd: syscon: implement device_node_to_regmap Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 04/21] regmap: retire of_node_to_regmap in favor of device_node_to_regmap Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 05/21] ARM: include: remove unused <asm/processor.h> Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 06/21] treewide: use cpu_relax() where appropriate Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 07/21] of: port Linux of_get_compatible_child helper Ahmad Fatoum
2020-04-14 6:46 ` Sascha Hauer
2020-04-14 7:29 ` Ahmad Fatoum
2020-04-14 9:44 ` Michael Tretter
2020-04-14 15:41 ` [PATCH] fixup! " Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 08/21] clk: implement clk_register_fixed_rate Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 09/21] clk: add clk_unregister stub Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 10/21] include: linux/kernel.h: port DIV_ROUND_CLOSEST_ULL definition Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 11/21] clk: migrate to SPDX-License-Identifier use Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 12/21] clk: at91: fix masterck name Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 13/21] clk: at91: fix possible deadlock Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 14/21] clk: at91: delete no-longer required DT compat code Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 15/21] clk: at91: compile dt-compat for all platforms that require it Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 16/21] clk: at91: add __init marker where appropriate Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 17/21] clk: at91: Mark struct clk_range as const Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 18/21] clk: at91: allow 24 Mhz clock as input for PLL Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 19/21] clk: at91: add sama5d2 audio PLL support Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 20/21] clk: at91: port Linux v5.6 SAM9X60 (new ARM926EJ-S) clock support Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 21/21] clk: at91: sckc: fix off-by-1000 in udelay() Ahmad Fatoum
2020-04-15 9:23 ` [PATCH 00/21] clk: at91: sync with Linux v5.6 Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200413075204.17544-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox