From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from zimbra2.kalray.eu ([92.103.151.219]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jQnV1-00071h-F1 for barebox@lists.infradead.org; Tue, 21 Apr 2020 07:39:21 +0000 From: Clement Leger Date: Tue, 21 Apr 2020 09:38:59 +0200 Message-Id: <20200421073859.25942-1-cleger@kalray.eu> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] Documentation: kvx: add first documentation To: barebox@lists.infradead.org, Sascha Hauer Cc: Clement Leger Add documentation on kvx architecture and kalray k200 board. Signed-off-by: Clement Leger --- Documentation/boards/kvx.rst | 98 ++++++++++++++++++++++++ Documentation/boards/kvx/kalray-k200.rst | 11 +++ 2 files changed, 109 insertions(+) create mode 100644 Documentation/boards/kvx.rst create mode 100644 Documentation/boards/kvx/kalray-k200.rst diff --git a/Documentation/boards/kvx.rst b/Documentation/boards/kvx.rst new file mode 100644 index 000000000..2641b002a --- /dev/null +++ b/Documentation/boards/kvx.rst @@ -0,0 +1,98 @@ +KVX +=== + +The Kalray VLIW processor family (KVX) has the following features: + - 32/64 bits execution mode + - 6-issue VLIW architecture + - 64 x 64bits general purpose registers + - SIMD instructions + - little-endian + - deep learning co-processor + +Kalray kv3 core which is the third of the KVX family is embedded in Kalray +MPPA3-80 SoC currently used on K200 boards. + +This SoC contains 5 clusters which are each made of: + - 4MiB of on-chip memory + - 1 dedicated safety/security core (kv3 core). + - 16 PEs (Processing Elements) (kv3 cores). + - 16 Co-processors (one per PE) + - 2 x Crypto accelerators + +MPPA3-80 SoC contains the following features: + - 5 x Clusters + - 2 x 100G Ethernet controllers + - 8 x PCIe GEN4 controllers (Root Complex and Endpoint capable) + - 2 x USB 2.0 controllers + - 1 x Octal SPI-NOR flash controller + - 1 x eMMC controller + - 3 x Quad SPI controllers + - 6 x UART + - 5 x I2C controllers (3 x SMBus capable) + - 4 x CAN controller + - 1 x OTP memory + +The Kalray VLIW architecture barebox port allows to boot it as a second stage +bootloader (SSBL). It is loaded after the FSBL which initialize DDR and needed +peripherals. FSBL always start on the Security Core of Cluster 0 + +The FSBL can load elf files and pass them a device tree loaded from SPI NOR +flash. As such, barebox should be flashed as an elf file into the SSBL +partition. + +KVX boards +---------- + +.. toctree:: + :glob: + :maxdepth: 1 + + kvx/* + +Getting a toolchain +------------------- + +Pre-built toolchain are available from github ([#f1]_). In order to build one +from scratch, build scripts are available on github too ([#f2]_). +Once built or downloaded, a ``kvx-elf-`` toolchain will be available and should +be added to your ``PATH``. + +Building barebox +---------------- + +Currently, kvx port is provided with a defconfig named ``generic_defconfig``. +To build it, first generate the config and then run the build: + +.. code-block:: sh + + make ARCH=kvx O=$PWD/build defconfig + make ARCH=kvx O=$PWD/build all + +This will generate a ``barebox`` elf file. By default barebox for kvx is +compiled to be run at address 0x110000000. + +Booting barebox +--------------- + +``barebox`` elf file can be loaded using ``kvx-jtag-runner`` to execute the +image via JTAG on an existing board. + +Depending on your board and barebox version, you should see the following +message appearing on the serial console. + +.. code-block:: console + + barebox 2020.03.0-00126-ga74988bf5 #3 Wed Apr 15 11:31:28 CEST 2020 + + Board: KONIC 200 (K200) + malloc space: 0x110050fe0 -> 0x200000000 (size 3.7 GiB) + + Hit any to stop autoboot: 3 + barebox:/ + + +.. rubric:: References + +.. [#f1] `Toolchain releases `_ +.. [#f2] `Build scripts `_ + diff --git a/Documentation/boards/kvx/kalray-k200.rst b/Documentation/boards/kvx/kalray-k200.rst new file mode 100644 index 000000000..9d97fa255 --- /dev/null +++ b/Documentation/boards/kvx/kalray-k200.rst @@ -0,0 +1,11 @@ +Kalray K200 +=========== + +This board is based on a MPPA3-80 SoC. The board is shipped with: + + - 128MiB NOR flash Memory + - 8GiB DDR4 SDRAM + - 2 x 100G Ethernet controllers supporting 8 x 1G, 10 and 25G + - PCIe GEN4 X16 port + +See https://www.kalrayinc.com/portfolio/boards/ for more information. -- 2.17.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox