From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Cc: "Edmund Henniges" <eh@emlix.com>, "Daniel Glöckner" <dg@emlix.com>
Subject: [PATCH v4 00/11] Protect code from pollers
Date: Wed, 22 Apr 2020 09:54:41 +0200 [thread overview]
Message-ID: <20200422075452.25226-1-s.hauer@pengutronix.de> (raw)
Changes since v3:
- Rebased on current master (v2020.04.0+)
Changes since v2:
- Use a const char * as name argument and not a struct device_d. A name is
more universally available
- Also give pollers names for better debugability
- Add a poller command to show information about registered pollers
- Add Kconfig entries for both poller and slice commands
- Lock pollers with slices against themselves to allow running pollers
inside of other pollers
Changes since v1:
- Do not recurse into dependencies during slice_acquire
- detect recursice dependencies
- Do not add the phy device as dependency to the ethernet device but
instead lock them individually
- Add some more patches created during debugging this series
Sascha Hauer (11):
poller: Give pollers a name
poller: Add a poller command
Introduce slices
net: Add a slice to struct eth_device
net: mdiobus: Add slice
usb: Add a slice to usb host controllers
usbnet: Add slice
net: Call net_poll() in a poller
net: reply to ping requests
usbnet: Be more friendly in the receive path
poller: Allow to run pollers inside of pollers
commands/Kconfig | 18 ++
common/Kconfig | 4 +
common/Makefile | 1 +
common/poller.c | 90 +++++++++-
common/ratp/ratp.c | 2 +-
common/slice.c | 294 +++++++++++++++++++++++++++++++++
drivers/input/gpio_keys.c | 2 +-
drivers/input/imx_keypad.c | 2 +-
drivers/input/input.c | 2 +-
drivers/input/qt1070.c | 2 +-
drivers/input/twl6030_pwrbtn.c | 2 +-
drivers/led/core.c | 2 +-
drivers/net/phy/mdio_bus.c | 41 +++++
drivers/net/usb/usbnet.c | 22 ++-
drivers/usb/core/usb.c | 6 +
drivers/usb/gadget/udc-core.c | 2 +-
drivers/watchdog/wd_core.c | 2 +-
fs/nfs.c | 4 +-
fs/tftp.c | 2 -
include/linux/phy.h | 38 ++---
include/net.h | 11 +-
include/poller.h | 7 +-
include/slice.h | 31 ++++
include/usb/usb.h | 7 +
include/usb/usbnet.h | 3 +
net/dhcp.c | 1 -
net/dns.c | 1 -
net/eth.c | 29 +++-
net/net.c | 60 ++++++-
net/netconsole.c | 4 +-
net/nfs.c | 1 -
net/ping.c | 2 -
net/sntp.c | 2 -
33 files changed, 626 insertions(+), 71 deletions(-)
create mode 100644 common/slice.c
create mode 100644 include/slice.h
--
2.26.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2020-04-22 7:54 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-22 7:54 Sascha Hauer [this message]
2020-04-22 7:54 ` [PATCH 01/11] poller: Give pollers a name Sascha Hauer
2020-04-22 7:54 ` [PATCH 02/11] poller: Add a poller command Sascha Hauer
2020-04-22 7:54 ` [PATCH 03/11] Introduce slices Sascha Hauer
2020-05-08 18:01 ` Daniel Glöckner
2020-05-11 6:40 ` Sascha Hauer
2020-04-22 7:54 ` [PATCH 04/11] net: Add a slice to struct eth_device Sascha Hauer
2020-04-22 7:54 ` [PATCH 05/11] net: mdiobus: Add slice Sascha Hauer
2020-04-22 7:54 ` [PATCH 06/11] usb: Add a slice to usb host controllers Sascha Hauer
2020-04-22 7:54 ` [PATCH 07/11] usbnet: Add slice Sascha Hauer
2020-04-22 7:54 ` [PATCH 08/11] net: Call net_poll() in a poller Sascha Hauer
2020-04-22 7:54 ` [PATCH 09/11] net: reply to ping requests Sascha Hauer
2020-04-22 7:54 ` [PATCH 10/11] usbnet: Be more friendly in the receive path Sascha Hauer
2020-04-22 7:54 ` [PATCH 11/11] poller: Allow to run pollers inside of pollers Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200422075452.25226-1-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=dg@emlix.com \
--cc=eh@emlix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox