mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Clement Leger <cleger@kalray.eu>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v4 0/7] elf: add better bootm support
Date: Sat, 9 May 2020 18:51:10 +0200	[thread overview]
Message-ID: <20200509165110.bl5xsqcpqckvqay6@pengutronix.de> (raw)
In-Reply-To: <20200509145142.roleuli4nuccngfz@pengutronix.de>


[-- Attachment #1.1: Type: text/plain, Size: 3705 bytes --]

On Sat, May 09, 2020 at 04:51:42PM +0200, Oleksij Rempel wrote:
> Hi Clement,
> 
> suddenly it is still exploding. I'll try to investigate the reason.

common/elf.c:
  load_elf_image_phdr()
    elf_hdr_e_phnum() <-- returns 0
    for (i = 0; i < elf_hdr_e_phnum(elf, buf) ; ++i) {
      ... so we will never get here.

Probably we should add a sanity check here and be more verbose in this
case.

here is my elf image:
https://github.com/olerem/barebox/blob/new-elf/ore-linux-dpt-module

> On Fri, May 08, 2020 at 07:04:04PM +0200, Clement Leger wrote:
> > Currently, when booting an elf file using "bootm /dev/mtdx", bootm will
> > simply pass the file to the bootm and the read done on it will read the
> > entire flash partition. This series starts by some cleanup and then add an
> > elf_open function to load the elf file size only based on the elf header.
> > A special handling for the elf file is also added in bootm data to allow
> > using directly the elf file structure. Finally the mips bootm is modified
> > to use bootm_load_os directly instead of manual elf loading.
> > 
> > Compilation for both mips and arm has been tested but run on qemu-malta was not
> > possible. Changing the MALLOC_SIZE to allow loading a kernel always lead to a 
> > non-bootable system. Changes have been tested on kvx architecture for which
> > bootm support has been added and will be submitted.
> > 
> > Changes v3 -> v4
> >  - Fix init of elf entry address to be used by bootm_load_elf
> > 
> > Changes v2 -> v3
> >  - Integrate elf loading in bootm_load_os
> >  - Add patch to remove now unused elf_load_image/elf_release_image
> >  - Use malloc instead of xmalloc and check return value
> > 
> > Changes v1 -> v2
> >  - Add BOOTM_ELF config to select elf support and add checks in code
> >  - Add an elf_get_mem_size function to avoid computing elf size in bootm.c
> >  - Use xmalloc and read_full in elf_open instead of xzalloc/read
> >  - Fix data->elf NULL reset
> >  - Remove elf struct entirely from mips bootm code
> > 
> > Clement Leger (7):
> >   common: elf: add computation of elf boundaries
> >   common: elf: fix warning on 32 bits architectures
> >   common: elf: split init to be reused from other function
> >   common: elf: add elf_open, elf_close and elf_load
> >   common: bootm: add support for elf file loading
> >   mips: lib: bootm: use bootm elf loading capabilities
> >   common: elf: remove elf_load_image/elf_release_image
> > 
> >  arch/mips/lib/bootm.c |  31 +++++-------
> >  common/Kconfig        |   8 +++
> >  common/bootm.c        |  33 +++++++++++++
> >  common/elf.c          | 111 +++++++++++++++++++++++++++++++++++-------
> >  include/bootm.h       |   3 ++
> >  include/elf.h         |  16 +++++-
> >  6 files changed, 163 insertions(+), 39 deletions(-)
> > 
> > -- 
> > 2.17.1
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 149 bytes --]

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2020-05-09 16:51 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-08 17:04 Clement Leger
2020-05-08 17:04 ` [PATCH v4 1/7] common: elf: add computation of elf boundaries Clement Leger
2020-05-08 17:04 ` [PATCH v4 2/7] common: elf: fix warning on 32 bits architectures Clement Leger
2020-05-08 17:04 ` [PATCH v4 3/7] common: elf: split init to be reused from other function Clement Leger
2020-05-08 17:04 ` [PATCH v4 4/7] common: elf: add elf_open, elf_close and elf_load Clement Leger
2020-05-08 17:04 ` [PATCH v4 5/7] common: bootm: add support for elf file loading Clement Leger
2020-05-08 17:04 ` [PATCH v4 6/7] mips: lib: bootm: use bootm elf loading capabilities Clement Leger
2020-05-08 17:04 ` [PATCH v4 7/7] common: elf: remove elf_load_image/elf_release_image Clement Leger
2020-05-09 14:51 ` [PATCH v4 0/7] elf: add better bootm support Oleksij Rempel
2020-05-09 16:51   ` Oleksij Rempel [this message]
2020-05-09 19:24     ` Clément Leger
2020-05-10  4:31       ` Oleksij Rempel
2020-05-10 11:31         ` Clément Leger
2020-06-06 10:11           ` Oleksij Rempel
2020-06-06 11:16             ` Clément Leger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200509165110.bl5xsqcpqckvqay6@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=cleger@kalray.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox