From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from zimbra2.kalray.eu ([92.103.151.219]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jjICX-0002r8-Ix for barebox@lists.infradead.org; Thu, 11 Jun 2020 08:04:43 +0000 From: Clement Leger Date: Thu, 11 Jun 2020 10:02:00 +0200 Message-Id: <20200611080207.6482-1-cleger@kalray.eu> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v5 0/7] elf: add better bootm support To: Sascha Hauer , barebox@lists.infradead.org Cc: Clement Leger , Oleksij Rempel Currently, when booting an elf file using "bootm /dev/mtdx", bootm will simply pass the file to the bootm handler and the read done on it will read the entire flash partition. This series starts by some cleanup and then modify the elf loader to load the elf file without copying the whole elf file to an intermediate buffer. Only the elf header is copied in order to parse the elf file into a list of segment and then, the segments are loaded directly from the file. A special handling for the elf file is also added in bootm data to allow using directly the elf file structure. Finally the mips bootm handler is modified to use bootm_load_os directly instead of manual elf loading. Compilation for both mips and arm has been tested but run on qemu-malta was not possible. Changes have been tested on kvx architecture for which bootm support has been added and will be submitted. Changes v4 -> v5 - Rework elf loading to load from file rather than a buffer - Use calloc instead of xzalloc in elf file loading - Add check of program headers in elf check Changes v3 -> v4 - Fix init of elf entry address to be used by bootm_load_elf Changes v2 -> v3 - Integrate elf loading in bootm_load_os - Add patch to remove now unused elf_load_image/elf_release_image - Use malloc instead of xmalloc and check return value Changes v1 -> v2 - Add BOOTM_ELF config to select elf support and add checks in code - Add an elf_get_mem_size function to avoid computing elf size in bootm.c - Use xmalloc and read_full in elf_open instead of xzalloc/read - Fix data->elf NULL reset - Remove elf struct entirely from mips bootm code Clement Leger (7): common: elf: fix warning on 32 bits architectures common: elf: use calloc instead of xzalloc common: elf: check number of elf program headers common: elf: load elf directly from file common: elf: add elf_open, elf_close and elf_load common: bootm: add support for elf file loading mips: lib: bootm: use bootm elf loading capabilities arch/mips/lib/bootm.c | 25 ++--- common/Kconfig | 8 ++ common/bootm.c | 33 ++++++ common/elf.c | 226 +++++++++++++++++++++++++++++++++++------- include/bootm.h | 3 + include/elf.h | 9 +- 6 files changed, 248 insertions(+), 56 deletions(-) -- 2.17.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox