From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org, david@protonic.nl
Subject: Re: [PATCH v1] ARM: add imx6 based Protonic boads
Date: Thu, 11 Jun 2020 12:00:28 +0200 [thread overview]
Message-ID: <20200611100028.xlqglxyijzf6rtwc@pengutronix.de> (raw)
In-Reply-To: <20200611095521.2293-1-o.rempel@pengutronix.de>
[-- Attachment #1.1: Type: text/plain, Size: 237229 bytes --]
Dear reviewers,
please do not spend time on reviewing devicetrees in this patch. They
will be replaced by the better version as soon as hardly reworked
version of them will be accepted to the linux kernel.
For every thing else, a merciless reviewing is welcome :)
Thank you!
On Thu, Jun 11, 2020 at 11:55:20AM +0200, Oleksij Rempel wrote:
> Add initial support for 15 i.MX6 based Protonic boards.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> arch/arm/boards/Makefile | 1 +
> arch/arm/boards/protonic-imx6/Makefile | 1 +
> .../boards/protonic-imx6/ddr3-defines.imxcfg | 350 +++++++++
> .../protonic-imx6/flash-header-alti6p.imxcfg | 135 ++++
> .../protonic-imx6/flash-header-lanmcu.imxcfg | 127 ++++
> .../protonic-imx6/flash-header-plybas.imxcfg | 135 ++++
> .../protonic-imx6/flash-header-plym2m.imxcfg | 135 ++++
> .../protonic-imx6/flash-header-prti6g.imxcfg | 89 +++
> .../protonic-imx6/flash-header-prti6q.imxcfg | 135 ++++
> .../protonic-imx6/flash-header-prtmvt.imxcfg | 135 ++++
> .../protonic-imx6/flash-header-prtrvt.imxcfg | 135 ++++
> .../protonic-imx6/flash-header-prtvt7.imxcfg | 127 ++++
> .../protonic-imx6/flash-header-prtwd2.imxcfg | 241 +++++++
> .../protonic-imx6/flash-header-prtwd3.imxcfg | 291 ++++++++
> .../protonic-imx6/flash-header-victgo.imxcfg | 135 ++++
> .../protonic-imx6/flash-header-vicut1.imxcfg | 135 ++++
> .../protonic-imx6/flash-header-vicut1q.imxcfg | 140 ++++
> .../protonic-imx6/flash-header-vicutp.imxcfg | 187 +++++
> arch/arm/boards/protonic-imx6/lowlevel.c | 209 ++++++
> .../protonic-imx6/lpddr2-defines.imxcfg | 384 ++++++++++
> .../boards/protonic-imx6/padsetup-dl.imxcfg | 70 ++
> .../boards/protonic-imx6/padsetup-q.imxcfg | 69 ++
> .../boards/protonic-imx6/padsetup-ul.imxcfg | 42 ++
> arch/arm/dts/Makefile | 16 +
> arch/arm/dts/imx6dl-alti6p.dts | 118 +++
> arch/arm/dts/imx6dl-lanmcu.dts | 434 +++++++++++
> arch/arm/dts/imx6dl-plybas.dts | 186 +++++
> arch/arm/dts/imx6dl-plym2m.dts | 132 ++++
> arch/arm/dts/imx6dl-prtmvt.dts | 164 +++++
> arch/arm/dts/imx6dl-prtrvt.dts | 182 +++++
> arch/arm/dts/imx6dl-prtvt7.dts | 472 ++++++++++++
> arch/arm/dts/imx6dl-victgo.dts | 145 ++++
> arch/arm/dts/imx6dl-vicut1.dts | 51 ++
> arch/arm/dts/imx6q-prti6q.dts | 554 ++++++++++++++
> arch/arm/dts/imx6q-prtwd2.dts | 188 +++++
> arch/arm/dts/imx6q-vicut1.dts | 52 ++
> arch/arm/dts/imx6qdl-prti6q.dtsi | 174 +++++
> arch/arm/dts/imx6qdl-vicut1.dtsi | 208 ++++++
> arch/arm/dts/imx6qp-prtwd3.dts | 675 ++++++++++++++++++
> arch/arm/dts/imx6qp-vicutp.dts | 52 ++
> arch/arm/dts/imx6ul-prti6g.dts | 81 +++
> arch/arm/dts/imx6ul-prti6g.dtsi | 330 +++++++++
> arch/arm/mach-imx/Kconfig | 6 +
> images/Makefile.imx | 30 +
> 44 files changed, 7658 insertions(+)
> create mode 100644 arch/arm/boards/protonic-imx6/Makefile
> create mode 100644 arch/arm/boards/protonic-imx6/ddr3-defines.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-alti6p.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-lanmcu.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-plybas.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-plym2m.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prti6g.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prti6q.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtmvt.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtrvt.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtvt7.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtwd2.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtwd3.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-victgo.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-vicut1q.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/flash-header-vicutp.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/lowlevel.c
> create mode 100644 arch/arm/boards/protonic-imx6/lpddr2-defines.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/padsetup-dl.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/padsetup-q.imxcfg
> create mode 100644 arch/arm/boards/protonic-imx6/padsetup-ul.imxcfg
> create mode 100644 arch/arm/dts/imx6dl-alti6p.dts
> create mode 100644 arch/arm/dts/imx6dl-lanmcu.dts
> create mode 100644 arch/arm/dts/imx6dl-plybas.dts
> create mode 100644 arch/arm/dts/imx6dl-plym2m.dts
> create mode 100644 arch/arm/dts/imx6dl-prtmvt.dts
> create mode 100644 arch/arm/dts/imx6dl-prtrvt.dts
> create mode 100644 arch/arm/dts/imx6dl-prtvt7.dts
> create mode 100644 arch/arm/dts/imx6dl-victgo.dts
> create mode 100644 arch/arm/dts/imx6dl-vicut1.dts
> create mode 100644 arch/arm/dts/imx6q-prti6q.dts
> create mode 100644 arch/arm/dts/imx6q-prtwd2.dts
> create mode 100644 arch/arm/dts/imx6q-vicut1.dts
> create mode 100644 arch/arm/dts/imx6qdl-prti6q.dtsi
> create mode 100644 arch/arm/dts/imx6qdl-vicut1.dtsi
> create mode 100644 arch/arm/dts/imx6qp-prtwd3.dts
> create mode 100644 arch/arm/dts/imx6qp-vicutp.dts
> create mode 100644 arch/arm/dts/imx6ul-prti6g.dts
> create mode 100644 arch/arm/dts/imx6ul-prti6g.dtsi
>
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index e9e9163d58..48fac356c4 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -104,6 +104,7 @@ obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += plathome-openblocks-a6/
> obj-$(CONFIG_MACH_PM9261) += pm9261/
> obj-$(CONFIG_MACH_PM9263) += pm9263/
> obj-$(CONFIG_MACH_PM9G45) += pm9g45/
> +obj-$(CONFIG_MACH_PROTONIC_IMX6) += protonic-imx6/
> obj-$(CONFIG_MACH_QIL_A9260) += qil-a926x/
> obj-$(CONFIG_MACH_QIL_A9G20) += qil-a926x/
> obj-$(CONFIG_MACH_RADXA_ROCK) += radxa-rock/
> diff --git a/arch/arm/boards/protonic-imx6/Makefile b/arch/arm/boards/protonic-imx6/Makefile
> new file mode 100644
> index 0000000000..b08c4a93ca
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/Makefile
> @@ -0,0 +1 @@
> +lwl-y += lowlevel.o
> diff --git a/arch/arm/boards/protonic-imx6/ddr3-defines.imxcfg b/arch/arm/boards/protonic-imx6/ddr3-defines.imxcfg
> new file mode 100644
> index 0000000000..65bd1bc3c6
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/ddr3-defines.imxcfg
> @@ -0,0 +1,350 @@
> +/*
> + * Timing configuration:
> + *
> + * MDCFG0:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tRFC 2Gb 400MHz 0x3f (64) 24 0x3f000000
> + * 4Gb 400MHz 0x77 (120) 24 0x77000000
> + * 8Gb 400MHz 0x8b (140) 24 0x8b000000
> + * 2Gb 533MHz 0x55 (86) 24 0x55000000
> + * 4Gb 533MHz 0x9f (160) 24 0x9f000000
> + * 8Gb 533MHz 0xba (187) 24 0xba000000
> + * tXS 2Gb 400MHz 0x43 (68) 16 0x00430000
> + * 4Gb 400MHz 0x7b (124) 16 0x007b0000
> + * 8Gb 400MHz 0x8f (144) 16 0x008f0000
> + * 2Gb 533MHz 0x5b (92) 16 0x005b0000
> + * 4Gb 533MHz 0xa5 (166) 16 0x00a50000
> + * 8Gb 533MHz 0xc0 (193) 16 0x00c00000
> + * tXP * 400MHz 0x2 (3) 13 0x00004000
> + * * 533MHz 0x3 (4) 13 0x00006000
> + * tXPDLL * 400MHz 0x9 (10) 9 0x00001200
> + * * 533MHz 0xc (13) 9 0x00001800
> + * tFAW * 400MHz 0x13 (20) 4 0x00000130
> + * * 533MHz 0x1a (27) 4 0x000001a0
> + * tCL * 400MHz 0x3 (6) 0 0x00000003
> + * * 533MHz-CL7 0x4 (7) 0 0x00000004
> + * * 533MHz-CL8 0x5 (8) 0 0x00000005
> + * ----------------------------------------------------------------
> + */
> +#define MDCFG0_2G_400MHZ 0x3f435333
> +#define MDCFG0_4G_400MHZ 0x777b5333
> +#define MDCFG0_8G_400MHZ 0x8b8f5333
> +#define MDCFG0_2G_533MHZ_CL8 0x555b79a5
> +#define MDCFG0_2G_533MHZ_CL7 0x555b79a4
> +#define MDCFG0_4G_533MHZ_CL8 0x9fa579a5
> +#define MDCFG0_4G_533MHZ_CL7 0x9fa579a4
> +#define MDCFG0_8G_533MHZ_CL8 0xbac079a5
> +#define MDCFG0_8G_533MHZ_CL7 0xbac079a4
> +
> +/*
> + * MDCFG1:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tRCD * 400MHz 0x5 (6) 28 0xa0000000
> + * * 533MHz 0x7 (8) 28 0xe0000000
> + * tRP * 400MHz 0x5 (6) 26 0x14000000
> + * * 533MHz 0x7 (8) 26 0x1c000000
> + * tRC * 400MHz 0x14 (21) 21 0x02800000
> + * * 533MHz 0x1b (28) 21 0x03600000
> + * tRAS * 400MHz 0x0e (15) 16 0x000e0000
> + * * 533MHz 0x13 (20) 16 0x00130000
> + * tRPA * 0x1 (tRP+1) 15 0x00008000
> + * tWR * 400MHz 0x5 (6) 9 0x00000a00
> + * * 533MHz 0x7 (8) 9 0x00000e00
> + * tMRD * 0xb (12) 5 0x00000160
> + * tCWL * 400MHz 0x3 (5) 0 0x00000003
> + * * 533MHz 0x4 (6) 0 0x00000004
> + * ----------------------------------------------------------------
> + */
> +#define MDCFG1_400MHZ 0xb68e8b63
> +#define MDCFG1_533MHZ 0xff738f64
> +
> +/*
> + * MDCFG2:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tDLLK * 0x1ff (512) 16 0x01ff0000
> + * tRTP * 0x3 (4) 6 0x000000c0
> + * tWTR * 0x3 (4) 3 0x00000018
> + * tRRD * 400MHz 0x3 (4) 0 0x00000003
> + * * 533MHz 0x5 (6) 0 0x00000005
> + * ----------------------------------------------------------------
> + */
> +#define MDCFG2_400MHZ 0x01ff00db
> +#define MDCFG2_533MHZ 0x01ff00dd
> +
> +/*
> + * MDOR:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tXPR 2Gb 400MHz 0x43 (68) 16 0x00430000
> + * 4Gb 400MHz 0x7b (124) 16 0x007b0000
> + * 8Gb 400MHz 0x8f (144) 16 0x008f0000
> + * 2Gb 533MHz 0x5b (92) 16 0x005b0000
> + * 4Gb 533MHz 0xa5 (166) 16 0x00a50000
> + * 8Gb 533MHz 0xc0 (193) 16 0x00c00000
> + * SDE_to_RST * 0x10 (14) 8 0x00001000
> + * RST_to_CKE * 0x23 (33) 0 0x00000023
> + * ----------------------------------------------------------------
> + */
> +#define MDOR_2G_400MHZ 0x00431023
> +#define MDOR_4G_400MHZ 0x007b1023
> +#define MDOR_8G_400MHZ 0x008f1023
> +#define MDOR_2G_533MHZ 0x005b1023
> +#define MDOR_4G_533MHZ 0x00a51023
> +#define MDOR_8G_533MHZ 0x00c01023
> +
> +/*
> + * MDOTC ODT delays:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tAOFPD * 400MHz 0x0 (1) 27 0x00000000
> + * * 533MHz 0x1 (2) 27 0x08000000
> + * tAONPD * 400MHz 0x0 (1) 24 0x00000000
> + * * 533MHz 0x1 (2) 24 0x01000000
> + * tANPD * 400MHz 0x3 (4) 20 0x00300000
> + * * 533MHz 0x4 (5) 20 0x00400000
> + * tAXPD * 400MHz 0x3 (4) 16 0x00030000
> + * * 533MHz 0x4 (5) 16 0x00040000
> + * tODTLon * 400MHz 0x3 (3) 12 0x00003000
> + * * 533MHz 0x4 (4) 12 0x00004000
> + * tODTidle_off * 400MHz 0x3 (3) 4 0x00000030
> + * * 533MHz 0x4 (4) 4 0x00000040
> + * ----------------------------------------------------------------
> + */
> +#define MDOTC_400MHZ 0x00333030
> +#define MDOTC_533MHZ 0x09444040
> +
> +/*
> + * MDPDC:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * PRCT_1 * 0x0 28 0x00000000
> + * PRCT_0 * 0x0 24 0x00000000
> + * tCKE * 0x2 (3) 16 0x00020000
> + * PWDT_1 * 0x5 (256) 12 0x00005000
> + * PWDT_0 * 0x5 (256) 8 0x00000500
> + * SLOW_PD * 0x0 (0) 7 0x00000000
> + * BOTH_CS_PD * 0x1 (1) 6 0x00000040
> + * tCKSRX * 400MHz 0x5 (5) 3 0x00000028
> + * * 533MHz 0x6 (6) 3 0x00000030
> + * tCKSRE * 400MHz 0x5 (5) 0 0x00000005
> + * * 533MHz 0x6 (6) 0 0x00000006
> + * ----------------------------------------------------------------
> + */
> +#define MDPDC_400MHZ 0x0002556d
> +#define MDPDC_533MHZ 0x00025576
> +
> +/*
> + * MDCTL:
> + * 2Gb: CS0 enable, 14bit ROW, 10bit COL, BL=8, 64bit data
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * SDE_0 * 0x1 (1) 31 0x80000000
> + * SDE_1 * 0x0 (0) 30 0x00000000
> + * ROW 2Gb * 0x3 (14) 24 0x03000000
> + * 4Gb * 0x4 (15) 24 0x04000000
> + * 8Gb * 0x5 (16) 24 0x05000000
> + * COL * 0x1 (10) 20 0x00100000
> + * BL * 0x1 (8) 19 0x00080000
> + * DSIZ 64bit 0x2 (64) 16 0x00020000
> + * DSIZ 32bit 0x1 (32) 16 0x00010000
> + * DSIZ 16bit 0x0 (16) 16 0x00000000
> + * ----------------------------------------------------------------
> + */
> +#define MDCTL_2G_16BIT 0x83180000
> +#define MDCTL_2G_32BIT 0x83190000
> +#define MDCTL_2G 0x831a0000
> +#define MDCTL_4G_16BIT 0x84180000
> +#define MDCTL_4G_32BIT 0x84190000
> +#define MDCTL_4G 0x841a0000
> +#define MDCTL_8G 0x851a0000
> +
> +/*
> + * MDASP Address space partitioning:
> + *
> + * At 0.25GiB, internal address space ends. Above that DDR3 should be
> + * located. The CS1/CS0 split-line determines where:
> + *
> + * For 1x2Gb chips (0.25GiB total on CS0): 0.5GiB
> + * For 2x4Gb chips (1GiB total on CS0): 1.25GiB
> + * For 4x2Gb chips (1GiB total on CS0): 1.25GiB
> + * For 4x4Gb chips (2GiB total on CS0): 2.25GiB
> + * For 4x8Gb chips (4GiB total on CS0): 4.00GiB (maximum possible,
> + * shadowed partially by internal address space).
> + *
> + * Register value Split
> + * ---------------------------
> + * 0x0000000f 0.5GiB
> + * 0x00000017 0.75GiB
> + * 0x00000027 1.25GiB
> + * 0x00000047 2.25GiB
> + * 0x0000007f 4.00GiB
> + */
> +#define MDASP_512MIB 0x0000000f
> +#define MDASP_768MIB 0x00000017
> +#define MDASP_1GIB25 0x00000027
> +#define MDASP_2GIB25 0x00000047
> +#define MDASP_4GIB00 0x0000007f
> +
> +/*
> + * Initialize DDR3 chips
> + * MDSCR: Value = 0xvvvv803n, with 0xvvvv = value, n = Reg. number (BA)
> + */
> +/*
> + * DDR3 chip MR2, n = 2:
> + *
> + * Par. Chip VALUE BITS vvvv
> + * ----------------------------------------------------------------
> + * Rtt(wr) * 0x0 (disabled) 10, 9 0x0000
> + * SR-Temp. * 0x1 (Extended) 7 0x0080
> + * Auto-SR * 0x0 (Manual) 6 0x0000
> + * CWL * 400MHz 0x0 (5tCK) 5, 4, 3 0x0000
> + * * 533MHz 0x1 (6tCK) 5, 4, 3 0x0008
> + * ----------------------------------------------------------------
> + */
> +#define DDR3_MR2_400MHZ_RTT_OFF 0x00808032
> +#define DDR3_MR2_533MHZ_RTT_OFF 0x00888032
> +#define DDR3_MR2_400MHZ_RTT_120 0x04808032
> +#define DDR3_MR2_533MHZ_RTT_120 0x04888032
> +
> +/*
> + * DDR3 chip MR1, n = 1:
> + *
> + * Par. Chip VALUE BITS vvvv
> + * ----------------------------------------------------------------
> + * Qoff * 0x0 (enabled) 12 0x0000
> + * TDQS * 0x0 (disabled) 11 0x0000
> + * Rtt * 0x0 (disabled) 9, 6, 2 0x0000
> + * Write-levelling * 0x0 (disable) 7 0x0000
> + * ODS * 0x0 (RZQ/6=40) 5, 1 0x0000
> + * DLL * 0x0 (enable) 0 0x0000
> + * ----------------------------------------------------------------
> + */
> +#define DDR3_MR1_RTT_OFF_ODS_40 0x00008031
> +#define DDR3_MR1_RTT_120_ODS_40 0x00408031
> +#define DDR3_MR1_RTT_60_ODS_40 0x00048031
> +#define DDR3_MR1_RTT_OFF_ODS_34 0x00028031
> +#define DDR3_MR1_RTT_120_ODS_34 0x00428031
> +#define DDR3_MR1_RTT_60_ODS_34 0x00068031
> +
> +/*
> + * DDR3 chip MR0, n = 0:
> + *
> + * Par. Chip VALUE BITS vvvv
> + * ----------------------------------------------------------------
> + * Precharge PD * 0x1 (fast exit) 12 0x1000
> + * WR 400MHz 0x2 (6) 11,10,9 0x0400
> + * 533MHz 0x4 (8) 11,10,9 0x0800
> + * DLL reset * 0x1 (Yes) 8 0x0100
> + * CL 400MHz 0x4 (6) 6,5,4,2 0x0020
> + * 533MHz 0x6 (7) 6,5,4,2 0x0030
> + * 533MHz 0x8 (8) 6,5,4,2 0x0040
> + * RD burst type * 0x0 (seq.) 3 0x0000
> + * BL * 0x0 (BL8) 0 0x0000
> + * ----------------------------------------------------------------
> + */
> +#define DDR3_MR0_400MHZ 0x15208030
> +#define DDR3_MR0_533MHZ_CL7 0x19308030
> +#define DDR3_MR0_533MHZ_CL8 0x19408030
> +
> +
> +/*
> + * MDREF:
> + * REF_SEL (bit 14,15): 0 (64kHz, needed for high-temp.)
> + * REFR (bit 11, 12, 13): 0x3 (4 refreshes) -> 0x00001800
> + * 0x7 (8 refreshes) -> 0x00003800
> + */
> +#define MDREF_64KHZ 0x00001800
> +#define MDREF_32KHZ 0x00007800
> +
> +/* MPODTCTRL */
> +#define MPODTCTRL_ODT_OFF 0x00000007
> +#define MPODTCTRL_ODT_120 0x00011117
> +#define MPODTCTRL_ODT_60 0x00022227
> +#define MPODTCTRL_ODT_40 0x00033337
> +
> +/*
> + * MPDGCTRL0:
> + *
> + * Channel 0:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * RST_RD_FIFO * 0 31 0x00000000
> + * DG_CMP_CYC * 1 30 0x40000000
> + * DG_DIS * 0 29 0x00000000
> + * HW_DG_EN * 0 28 0x00000000
> + * DG_HC_DEL1 400MHz 2 24 0x02000000
> + * 533MHz 3 24 0x03000000
> + * DG_EXT_UP * 0 23 0x00000000
> + * DG_DL_ABS_OFFS1 400MHz 0x35 16 0x00350000
> + * 533MHz 0x4b 16 0x004b0000
> + * DG_HC_DEL0 400MHz 2 8 0x00000200
> + * 533MHz 3 8 0x00000300
> + * DG_DL_ABS_OFFS0 400MHz 0x35 0 0x00000031
> + * 533MHz 0x4b 0 0x00000050
> + * ----------------------------------------------------------------
> + */
> +#define MPDGCTRL0_CH0_400MHZ 0x42350231
> +#define MPDGCTRL0_CH0_533MHZ 0x434b0350
> +/*
> + *
> + * Channel 1:
> + *
> + * DG_HC_DEL1 (5) 400MHz 2 24 0x02000000
> + * 533MHz 3 24 0x03000000
> + * DG_DL_ABS_OFFS1 (5) 400MHz 0x35 16 0x00350000
> + * 533MHz 0x4b 16 0x004b0000
> + * DG_HC_DEL0 (4) 400MHz 2 8 0x00000200
> + * 533MHz 3 8 0x00000300
> + * DG_DL_ABS_OFFS0 (4) 400MHz 0x35 0 0x00000031
> + * 533MHz 0x4b 0 0x00000050
> + * ----------------------------------------------------------------
> + */
> +#define MPDGCTRL0_CH1_400MHZ 0x42350231
> +#define MPDGCTRL0_CH1_533MHZ 0x434b0350
> +
> +/*
> + * MPDGCTRL1:
> + *
> + * Channel 0:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * DG_HC_DEL3 400MHz 2 24 0x02000000
> + * 533MHz 3 24 0x03000000
> + * DG_DL_ABS_OFFS3 400MHz 0x1a 16 0x001a0000
> + * 533MHz 0x4c 16 0x004c0000
> + * DG_HC_DEL2 400MHz 2 8 0x00000200
> + * 533MHz 3 8 0x00000300
> + * DG_DL_ABS_OFFS2 400MHz 0x18 0 0x00000018
> + * 533MHz 0x59 0 0x00000059
> + * ----------------------------------------------------------------
> + */
> +#define MPDGCTRL1_CH0_400MHZ 0x021a0218
> +#define MPDGCTRL1_CH0_533MHZ 0x034c0359
> +/*
> + *
> + * Channel 1:
> + *
> + * DG_HC_DEL3 (7) 400MHz 2 24 0x02000000
> + * 533MHz 3 24 0x03000000
> + * DG_DL_ABS_OFFS3 (7) 400MHz 0x1a 16 0x001a0000
> + * 533MHz 0x65 16 0x00650000
> + * DG_HC_DEL2 (6) 400MHz 2 8 0x00000200
> + * 533MHz 3 8 0x00000300
> + * DG_DL_ABS_OFFS2 (6) 400MHz 0x18 0 0x00000018
> + * 533MHz 0x48 0 0x00000048
> + * ----------------------------------------------------------------
> + */
> +#define MPDGCTRL1_CH1_400MHZ 0x021a0218
> +#define MPDGCTRL1_CH1_533MHZ 0x03650348
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-alti6p.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-alti6p.imxcfg
> new file mode 100644
> index 0000000000..63eae0281e
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-alti6p.imxcfg
> @@ -0,0 +1,135 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x0001f0b0
> +
> +#include "padsetup-dl.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_4G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_4G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 MDASP_1GIB25
> +wm 32 0x021b0000 MDCTL_4G_32BIT
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_120
> +wm 32 0x021b4818 MPODTCTRL_ODT_120
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x001f001f
> +wm 32 0x021b4810 0x001f001f
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* RGMII config: ALTI6P doesn't have GRMII, disable! */
> +wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
> +wm 32 0x020e0788 0x00000000 /* disable ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e06c4 0x0001f0f9
> +wm 32 0x020e06c8 0x0001f0f9
> +wm 32 0x020e06cc 0x0001f0f9
> +wm 32 0x020e06d0 0x0001f0f9
> +wm 32 0x020e06d4 0x0001f0f9
> +wm 32 0x020e06d8 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x000130b0
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-lanmcu.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-lanmcu.imxcfg
> new file mode 100644
> index 0000000000..62846845fb
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-lanmcu.imxcfg
> @@ -0,0 +1,127 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug 0 LED */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +
> +#include "padsetup-dl.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_2G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_2G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 MDASP_512MIB
> +wm 32 0x021b0000 MDCTL_2G_16BIT
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_120
> +wm 32 0x021b4818 MPODTCTRL_ODT_120
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
> +wm 32 0x021b4810 0x00440044
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* RGMII config: MVT doesn't have GRMII, disable! */
> +wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
> +wm 32 0x020e0788 0x00000000 /* disable ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e06c4 0x0001f0f9
> +wm 32 0x020e06c8 0x0001f0f9
> +wm 32 0x020e06cc 0x0001f0f9
> +wm 32 0x020e06d0 0x0001f0f9
> +wm 32 0x020e06d4 0x0001f0f9
> +wm 32 0x020e06d8 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-plybas.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-plybas.imxcfg
> new file mode 100644
> index 0000000000..a734096aeb
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-plybas.imxcfg
> @@ -0,0 +1,135 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x0001f0b0
> +
> +#include "padsetup-dl.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_2G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_2G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 MDASP_512MIB
> +wm 32 0x021b0000 MDCTL_2G_16BIT
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_120
> +wm 32 0x021b4818 MPODTCTRL_ODT_120
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
> +wm 32 0x021b4810 0x00440044
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* RGMII config: MVT doesn't have GRMII, disable! */
> +wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
> +wm 32 0x020e0788 0x00000000 /* disable ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e06c4 0x0001f0f9
> +wm 32 0x020e06c8 0x0001f0f9
> +wm 32 0x020e06cc 0x0001f0f9
> +wm 32 0x020e06d0 0x0001f0f9
> +wm 32 0x020e06d4 0x0001f0f9
> +wm 32 0x020e06d8 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x000130b0
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-plym2m.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-plym2m.imxcfg
> new file mode 100644
> index 0000000000..a734096aeb
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-plym2m.imxcfg
> @@ -0,0 +1,135 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x0001f0b0
> +
> +#include "padsetup-dl.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_2G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_2G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 MDASP_512MIB
> +wm 32 0x021b0000 MDCTL_2G_16BIT
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_120
> +wm 32 0x021b4818 MPODTCTRL_ODT_120
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
> +wm 32 0x021b4810 0x00440044
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* RGMII config: MVT doesn't have GRMII, disable! */
> +wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
> +wm 32 0x020e0788 0x00000000 /* disable ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e06c4 0x0001f0f9
> +wm 32 0x020e06c8 0x0001f0f9
> +wm 32 0x020e06cc 0x0001f0f9
> +wm 32 0x020e06d0 0x0001f0f9
> +wm 32 0x020e06d4 0x0001f0f9
> +wm 32 0x020e06d8 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x000130b0
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-prti6g.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prti6g.imxcfg
> new file mode 100644
> index 0000000000..b42bb1cd9f
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-prti6g.imxcfg
> @@ -0,0 +1,89 @@
> +soc imx6
> +loadaddr 0x80000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +#include "padsetup-ul.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_2G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_2G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 0x00000047 /* MDASP_512MIB */
> +wm 32 0x021b0000 MDCTL_2G_16BIT
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 0x00000117 /* MPODTCTRL_ODT_120 */
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b0850 0x40404040 /* For now set all to 50%. */
> +
> +/* MPWLDECTRL0 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Enable all clocks */
> +wm 32 0x020c4068 0xffffffff
> +wm 32 0x020c406c 0xffffffff
> +wm 32 0x020c4070 0xffffffff
> +wm 32 0x020c4074 0xffffffff
> +wm 32 0x020c4078 0xffffffff
> +wm 32 0x020c407c 0xffffffff
> +wm 32 0x020c4080 0xffffffff
> +
> +/* SD1 pad settings */
> +wm 32 0x020e044c 0x0001f0f9
> +wm 32 0x020e0448 0x0001f0f9
> +wm 32 0x020e0450 0x0001f0f9
> +wm 32 0x020e0454 0x0001f0f9
> +wm 32 0x020e0458 0x0001f0f9
> +wm 32 0x020e045c 0x0001f0f9
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-prti6q.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prti6q.imxcfg
> new file mode 100644
> index 0000000000..1b2807fac4
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-prti6q.imxcfg
> @@ -0,0 +1,135 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e0228 0x00000005
> +wm 32 0x020e0244 0x00000005
> +wm 32 0x020e05f8 0x000130b0
> +wm 32 0x020e0614 0x0001b0b0
> +
> +#include "padsetup-q.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00000742
> +check 32 until_all_bits_clear 0x021b0018 0x00000002
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +check 32 until_any_bit_set 0x021b001c 0x00004000
> +
> +wm 32 0x021b000c MDCFG0_8G_533MHZ_CL7
> +wm 32 0x021b0010 MDCFG1_533MHZ
> +wm 32 0x021b0014 MDCFG2_533MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_8G_533MHZ
> +wm 32 0x021b0008 MDOTC_533MHZ
> +wm 32 0x021b0004 MDPDC_533MHZ
> +wm 32 0x021b0040 MDASP_4GIB00
> +wm 32 0x021b0000 MDCTL_8G
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_533MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_533MHZ_CL7
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_60
> +wm 32 0x021b4818 MPODTCTRL_ODT_60
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_533MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_533MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_533MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_533MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x001f001f
> +wm 32 0x021b4810 0x001f001f
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00001006 /* Enable autorefresh */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* DEBUG leds */
> +wm 32 0x020e0244 0x00000005
> +wm 32 0x020e0614 0x000130b0
> +
> +/* RGMII config */
> +wm 32 0x020e0790 0x00080000 /* 1V2 DDR IO */
> +wm 32 0x020e07ac 0x00000200 /* 60 Ohm ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e0724 0x0001f0f9
> +wm 32 0x020e0728 0x0001f0f9
> +wm 32 0x020e072c 0x0001f0f9
> +wm 32 0x020e0730 0x0001f0f9
> +wm 32 0x020e0734 0x0001f0f9
> +wm 32 0x020e0738 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-prtmvt.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtmvt.imxcfg
> new file mode 100644
> index 0000000000..091ad0ae80
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-prtmvt.imxcfg
> @@ -0,0 +1,135 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x0001f0b0
> +
> +#include "padsetup-dl.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_4G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_4G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 MDASP_1GIB25
> +wm 32 0x021b0000 MDCTL_4G_16BIT
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_120
> +wm 32 0x021b4818 MPODTCTRL_ODT_120
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
> +wm 32 0x021b4810 0x00440044
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* RGMII config: MVT doesn't have GRMII, disable! */
> +wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
> +wm 32 0x020e0788 0x00000000 /* disable ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e06c4 0x0001f0f9
> +wm 32 0x020e06c8 0x0001f0f9
> +wm 32 0x020e06cc 0x0001f0f9
> +wm 32 0x020e06d0 0x0001f0f9
> +wm 32 0x020e06d4 0x0001f0f9
> +wm 32 0x020e06d8 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x000130b0
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-prtrvt.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtrvt.imxcfg
> new file mode 100644
> index 0000000000..a734096aeb
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-prtrvt.imxcfg
> @@ -0,0 +1,135 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x0001f0b0
> +
> +#include "padsetup-dl.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_2G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_2G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 MDASP_512MIB
> +wm 32 0x021b0000 MDCTL_2G_16BIT
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_120
> +wm 32 0x021b4818 MPODTCTRL_ODT_120
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
> +wm 32 0x021b4810 0x00440044
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* RGMII config: MVT doesn't have GRMII, disable! */
> +wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
> +wm 32 0x020e0788 0x00000000 /* disable ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e06c4 0x0001f0f9
> +wm 32 0x020e06c8 0x0001f0f9
> +wm 32 0x020e06cc 0x0001f0f9
> +wm 32 0x020e06d0 0x0001f0f9
> +wm 32 0x020e06d4 0x0001f0f9
> +wm 32 0x020e06d8 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x000130b0
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-prtvt7.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtvt7.imxcfg
> new file mode 100644
> index 0000000000..63d6e61133
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-prtvt7.imxcfg
> @@ -0,0 +1,127 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug 0 LED */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +
> +#include "padsetup-dl.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_2G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_2G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 MDASP_768MIB
> +wm 32 0x021b0000 MDCTL_2G_32BIT
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_120
> +wm 32 0x021b4818 MPODTCTRL_ODT_120
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
> +wm 32 0x021b4810 0x00440044
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* RGMII config: MVT doesn't have GRMII, disable! */
> +wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
> +wm 32 0x020e0788 0x00000000 /* disable ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e06c4 0x0001f0f9
> +wm 32 0x020e06c8 0x0001f0f9
> +wm 32 0x020e06cc 0x0001f0f9
> +wm 32 0x020e06d0 0x0001f0f9
> +wm 32 0x020e06d4 0x0001f0f9
> +wm 32 0x020e06d8 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-prtwd2.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtwd2.imxcfg
> new file mode 100644
> index 0000000000..b675751e60
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-prtwd2.imxcfg
> @@ -0,0 +1,241 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "lpddr2-defines.imxcfg"
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* Set DDR clk to 400MHz. */
> +wm 32 0x020c4018 0x00060324
> +
> +/* #include "padsetup-q.imxcfg" */
> +
> +/* LPDDR2 i.MX6D/Q pad setup */
> +wm 32 0x020e0798 0x00080000
> +wm 32 0x020e0758 0x00000000
> +
> +wm 32 0x020e0588 0x00000030
> +wm 32 0x020e0594 0x00000030
> +
> +wm 32 0x020e056c 0x00000030
> +wm 32 0x020e0578 0x00000030
> +wm 32 0x020e074c 0x00000030
> +
> +wm 32 0x020e057c 0x00000030
> +wm 32 0x020e058c 0x00000000
> +wm 32 0x020e059c 0x00000030
> +wm 32 0x020e05a0 0x00000030
> +wm 32 0x020e078c 0x00000030
> +
> +wm 32 0x020e0750 0x00020000
> +wm 32 0x020e05a8 0x00003030
> +wm 32 0x020e05b0 0x00003030
> +wm 32 0x020e0524 0x00003030
> +wm 32 0x020e051c 0x00003030
> +wm 32 0x020e0518 0x00003030
> +wm 32 0x020e050c 0x00003030
> +wm 32 0x020e05b8 0x00003030
> +wm 32 0x020e05c0 0x00003030
> +
> +wm 32 0x020e0774 0x00020000
> +wm 32 0x020e0784 0x00000030
> +wm 32 0x020e0788 0x00000030
> +wm 32 0x020e0794 0x00000030
> +wm 32 0x020e079c 0x00000030
> +wm 32 0x020e07a0 0x00000030
> +wm 32 0x020e07a4 0x00000030
> +wm 32 0x020e07a8 0x00000030
> +wm 32 0x020e0748 0x00000030
> +
> +wm 32 0x020e05ac 0x00000030
> +wm 32 0x020e05b4 0x00000030
> +wm 32 0x020e0528 0x00000030
> +wm 32 0x020e0520 0x00000030
> +wm 32 0x020e0514 0x00000030
> +wm 32 0x020e0510 0x00000030
> +wm 32 0x020e05bc 0x00000030
> +wm 32 0x020e05c4 0x00000030
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +check 32 until_any_bit_set 0x021b001c 0x00004000
> +wm 32 0x021b401c 0x00008000
> +/* check 32 until_any_bit_set 0x021b401c 0x00004000 */
> +
> +
> +wm 32 0x021b085c 0x1b4700c7
> +wm 32 0x021b485c 0x1b4700c7
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1380003 /* FIXME: Why different? */
> +
> +wm 32 0x021b0890 0x00400000
> +wm 32 0x021b4890 0x00400000
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +wm 32 0x021b083c 0x20000000
> +wm 32 0x021b0840 0x00000000
> +wm 32 0x021b483c 0x20000000
> +wm 32 0x021b4840 0x00000000
> +
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* Set Write data delay 3 delay units for all bits */
> +wm 32 0x021b082c 0xf3333333
> +wm 32 0x021b0830 0xf3333333
> +wm 32 0x021b0834 0xf3333333
> +wm 32 0x021b0838 0xf3333333
> +wm 32 0x021b482c 0xf3333333
> +wm 32 0x021b4830 0xf3333333
> +wm 32 0x021b4834 0xf3333333
> +wm 32 0x021b4838 0xf3333333
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/*
> + * Configure MMDC Channel 0
> + */
> +
> +/* MDMISC No addr mirror, 0 WALAT, 5 RALAT, LPDDR2 mode, RST */
> +wm 32 0x021b0018 0x00001602
> +check 32 until_all_bits_clear 0x021b0018 0x00000002
> +
> +wm 32 0x021b0004 0x00020036
> +wm 32 0x021b0008 0x12272000 /* FIXME: Why does script aid set this? */
> +wm 32 0x021b000c MDCFG0_8G_LPDDR2_CL6
> +wm 32 0x021b0010 MDCFG1_LPDDR2
> +wm 32 0x021b0014 MDCFG2_LPDDR2
> +
> +wm 32 0x021b0018 0x0000174c
> +wm 32 0x021b001c 0x00008000
> +wm 32 0x021b002c 0x0f9f26d2 /* MDRWD */
> +wm 32 0x021b0030 MDOR_LPDDR2
> +wm 32 0x021b0038 0x00190778 /* MDCFG3LP */
> +wm 32 0x021b0040 0x0000004f /* NOTE: According to RM */
> +wm 32 0x021b0400 0x11420000 /* MAARCR disable dyn jump */
> +wm 32 0x021b0000 MDCTL_LPDDR2
> +
> +/*
> + * Configure MMDC Channel 1
> + */
> +
> +/* MDMISC No addr mirror, 0 WALAT, 5 RALAT, LPDDR2 mode, RST */
> +wm 32 0x021b4018 0x00001602
> +check 32 until_all_bits_clear 0x021b4018 0x00000002
> +
> +wm 32 0x021b4004 0x00020036
> +wm 32 0x021b4008 0x12272000 /* FIXME: Why does script aid set this? */
> +wm 32 0x021b400c MDCFG0_8G_LPDDR2_CL6
> +wm 32 0x021b4010 MDCFG1_LPDDR2
> +wm 32 0x021b4014 MDCFG2_LPDDR2
> +
> +wm 32 0x021b4018 0x0000174c
> +wm 32 0x021b401c 0x00008000
> +wm 32 0x021b402c 0x0f9f26d2 /* MDOR */
> +wm 32 0x021b4030 MDOR_LPDDR2
> +wm 32 0x021b4038 0x00190778 /* MDCFG3LP */
> +wm 32 0x021b4040 MDASP_768MIB /* NOTE: According to RM */
> +wm 32 0x021b4400 0x11420000 /* MAARCR disable dyn jump */
> +wm 32 0x021b4000 MDCTL_LPDDR2
> +
> +/*
> + * Configure LPDDR2 devices
> + */
> +
> +wm 32 0x021b001c 0x00008010 /* Precharge all ch 0 */
> +wm 32 0x021b401c 0x00008010 /* Precharge all ch 1 */
> +
> +/* Channel 0 */
> +wm 32 0x021b001c 0x003f8030 /* Reset */
> +wm 32 0x021b001c 0xff0a8030 /* Calibrate */
> +wm 32 0x021b001c 0x82018030 /* MR1: nWR=6, WC=0, BT=0, BL=BL4 */
> +wm 32 0x021b001c 0x04028030 /* MR2: RL6/WL3 */
> +wm 32 0x021b001c 0x02038030 /* MR3: DS = 40 Ohm */
> +
> +/* Channel 1 */
> +wm 32 0x021b401c 0x003f8030
> +wm 32 0x021b401c 0xff0a8030
> +wm 32 0x021b401c 0x82018030
> +wm 32 0x021b401c 0x04028030
> +wm 32 0x021b401c 0x02038030
> +
> +/* MPDGCTRL disabled, reset fifos */
> +wm 32 0x021b083c 0xa0000000
> +wm 32 0x021b083c 0xa0000000
> +check 32 until_all_bits_clear 0x021b083c 0x80000000
> +wm 32 0x021b483c 0xa0000000
> +wm 32 0x021b483c 0xa0000000
> +check 32 until_all_bits_clear 0x021b483c 0x80000000
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1380003 /* FIXME: Why different? */
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +wm 32 0x021b4020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 0x00000000 /* LPDDR2: Disable ODT! */
> +wm 32 0x021b4818 0x00000000
> +
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b4004 MDPDC_400MHZ
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011006 /* Enable autorefresh */
> +wm 32 0x021b4404 0x00011006 /* Enable autorefresh */
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +wm 32 0x021b401c 0x00000000 /* Disable configuration req */
> +
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* DEBUG leds */
> +wm 32 0x020e0244 0x00000005
> +wm 32 0x020e0614 0x000130b0
> +
> +/* SD1 pad settings */
> +wm 32 0x020e0724 0x0001f0f9
> +wm 32 0x020e0728 0x0001f0f9
> +wm 32 0x020e072c 0x0001f0f9
> +wm 32 0x020e0730 0x0001f0f9
> +wm 32 0x020e0734 0x0001f0f9
> +wm 32 0x020e0738 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> +wm 32 0x020e06cc 0x000130f9
> +
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-prtwd3.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtwd3.imxcfg
> new file mode 100644
> index 0000000000..a6b2baaa36
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-prtwd3.imxcfg
> @@ -0,0 +1,291 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "lpddr2-defines.imxcfg"
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* Set DDR clk to 400MHz. */
> +wm 32 0x020c4018 0x00060324
> +
> +/* #include "padsetup-q.imxcfg" */
> +
> +/* LPDDR2 i.MX6D/Q pad setup */
> +wm 32 0x020e0798 0x00080000
> +wm 32 0x020e0758 0x00000000
> +
> +wm 32 0x020e0588 0x00000030
> +wm 32 0x020e0594 0x00000030
> +
> +wm 32 0x020e056c 0x00000030
> +wm 32 0x020e0578 0x00000030
> +wm 32 0x020e074c 0x00000030
> +
> +wm 32 0x020e057c 0x00000030
> +wm 32 0x020e058c 0x00000000
> +wm 32 0x020e059c 0x00000030
> +wm 32 0x020e05a0 0x00000030
> +wm 32 0x020e078c 0x00000030
> +
> +wm 32 0x020e0750 0x00020000
> +wm 32 0x020e05a8 0x00003030
> +wm 32 0x020e05b0 0x00003030
> +wm 32 0x020e0524 0x00003030
> +wm 32 0x020e051c 0x00003030
> +wm 32 0x020e0518 0x00003030
> +wm 32 0x020e050c 0x00003030
> +wm 32 0x020e05b8 0x00003030
> +wm 32 0x020e05c0 0x00003030
> +
> +wm 32 0x020e0774 0x00020000
> +wm 32 0x020e0784 0x00000030
> +wm 32 0x020e0788 0x00000030
> +wm 32 0x020e0794 0x00000030
> +wm 32 0x020e079c 0x00000030
> +wm 32 0x020e07a0 0x00000030
> +wm 32 0x020e07a4 0x00000030
> +wm 32 0x020e07a8 0x00000030
> +wm 32 0x020e0748 0x00000030
> +
> +wm 32 0x020e05ac 0x00000030
> +wm 32 0x020e05b4 0x00000030
> +wm 32 0x020e0528 0x00000030
> +wm 32 0x020e0520 0x00000030
> +wm 32 0x020e0514 0x00000030
> +wm 32 0x020e0510 0x00000030
> +wm 32 0x020e05bc 0x00000030
> +wm 32 0x020e05c4 0x00000030
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +check 32 until_any_bit_set 0x021b001c 0x00004000
> +wm 32 0x021b401c 0x00008000
> +/* check 32 until_any_bit_set 0x021b401c 0x00004000 */
> +
> +
> +wm 32 0x021b085c 0x1b4700c7
> +wm 32 0x021b485c 0x1b4700c7
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1380003 /* FIXME: Why different? */
> +
> +wm 32 0x021b0890 0x00400000
> +wm 32 0x021b4890 0x00400000
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +wm 32 0x021b083c 0x20000000
> +wm 32 0x021b0840 0x00000000
> +wm 32 0x021b483c 0x20000000
> +wm 32 0x021b4840 0x00000000
> +
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* Set Write data delay 3 delay units for all bits */
> +wm 32 0x021b082c 0xf3333333
> +wm 32 0x021b0830 0xf3333333
> +wm 32 0x021b0834 0xf3333333
> +wm 32 0x021b0838 0xf3333333
> +wm 32 0x021b482c 0xf3333333
> +wm 32 0x021b4830 0xf3333333
> +wm 32 0x021b4834 0xf3333333
> +wm 32 0x021b4838 0xf3333333
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* NOC: DDRCONF */
> +/* Sabre-auto: wm 32 0x00bb0008 0x00000000 */
> +/* Values (Address mapping for 64bit):
> + * 0 : 16 Row, 3 Bank, 10 Col interleave (11 Col for 32 bit)
> + * 1 : 15 Row, 3 Bank, 11 Col interleave (12 Col for 32 bit)
> + * 2 : 18 Row, 3 Bank, 8 Col interleave (9 Col for 32 bit)
> + * 3 : 17 Row, 3 Bank, 9 Col interleave (10 Col for 32 bit)
> + * 4 : 2 CS (?), 15 Row, 3 Bank, 10 Col, interleave
> + * ...
> + */
> +wm 32 0x00bb0008 0x00000000
> +
> +/*
> + * NOC DdrTiming:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * ActToAct 533MHz 0x1b (28) 0 0x0000001b
> + * LPDDR2 0x18 (24) 0 0x00000018
> + * RdToMiss 533MHz 0x10 (16) 6 0x00000400
> + * LPDDR2 0x11 (17) 6 0x00000440
> + * WrToMiss * 0x1e (30) 12 0x0001e000
> + * LPDDR2 0x19 (25) 12 0x00019000
> + * BurstLen * 0x4 (8/2) 18 0x00100000
> + * LPDDR2 0x2 (4/2) 18 0x00080000
> + * RdToWr * 0x3 (3) 21 0x00600000
> + * LPDDR2 0x5 (5) 21 0x00a00000
> + * WrToRd * 0xa (10) 26 0x28000000
> + * LPDDR2 0x6 (6) 26 0x18000000
> + * BwRatio * 0x0 (0) 31 0x00000000
> + * ----------------------------------------------------------------
> + */
> +/* Sabre-auto: wm 32 0x00bb000c 0x2891E41A */
> +wm 32 0x00bb000c 0x18a99459
> +
> +/*
> + * NOC Activate:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * Rrd * 0x6 (6) 0 0x00000006
> + * LPDDR2 0x4 (4) 0 0x00000004
> + * Faw * 0x1b (27) 4 0x000001b0
> + * LPDDR2 0x14 (20) 4 0x00000140
> + * FawBank * 0x0 (0) 10 0x00000000
> + * ----------------------------------------------------------------
> + */
> +/* Sabre-auto: wm 32 0x00bb0038 0x00000564 */
> +wm 32 0x00bb0038 0x00000144
> +
> +/*
> + * NOC ReadLatency: (FIXME)
> + */
> +wm 32 0x00bb0014 0x00000040
> +
> +/*
> + * Configure MMDC Channel 0
> + */
> +
> +/* MDMISC No addr mirror, 0 WALAT, 5 RALAT, LPDDR2 mode, RST */
> +wm 32 0x021b0018 0x00001602
> +check 32 until_all_bits_clear 0x021b0018 0x00000002
> +
> +wm 32 0x021b0004 0x00020036
> +wm 32 0x021b0008 0x12272000 /* FIXME: Why does script aid set this? */
> +wm 32 0x021b000c MDCFG0_8G_LPDDR2_CL6
> +wm 32 0x021b0010 MDCFG1_LPDDR2
> +wm 32 0x021b0014 MDCFG2_LPDDR2
> +
> +wm 32 0x021b0018 0x0000174c
> +wm 32 0x021b001c 0x00008000
> +wm 32 0x021b002c 0x0f9f26d2 /* MDRWD */
> +wm 32 0x021b0030 MDOR_LPDDR2
> +wm 32 0x021b0038 0x00190778 /* MDCFG3LP */
> +wm 32 0x021b0040 0x0000004f /* NOTE: According to RM */
> +wm 32 0x021b0400 0x15420000 /* MAARCR disable dyn jump/reordering */
> +wm 32 0x021b0000 MDCTL_LPDDR2
> +
> +/*
> + * Configure MMDC Channel 1
> + */
> +
> +/* MDMISC No addr mirror, 0 WALAT, 5 RALAT, LPDDR2 mode, RST */
> +wm 32 0x021b4018 0x00001602
> +check 32 until_all_bits_clear 0x021b4018 0x00000002
> +
> +wm 32 0x021b4004 0x00020036
> +wm 32 0x021b4008 0x12272000 /* FIXME: Why does script aid set this? */
> +wm 32 0x021b400c MDCFG0_8G_LPDDR2_CL6
> +wm 32 0x021b4010 MDCFG1_LPDDR2
> +wm 32 0x021b4014 MDCFG2_LPDDR2
> +
> +wm 32 0x021b4018 0x0000174c
> +wm 32 0x021b401c 0x00008000
> +wm 32 0x021b402c 0x0f9f26d2 /* MDRWD */
> +wm 32 0x021b4030 MDOR_LPDDR2
> +wm 32 0x021b4038 0x00190778 /* MDCFG3LP */
> +wm 32 0x021b4040 MDASP_768MIB /* NOTE: According to RM */
> +wm 32 0x021b4400 0x15420000 /* MAARCR disable dyn jump/reordering */
> +wm 32 0x021b4000 MDCTL_LPDDR2
> +
> +/*
> + * Configure LPDDR2 devices
> + */
> +
> +wm 32 0x021b001c 0x00008010 /* Precharge all ch 0 */
> +wm 32 0x021b401c 0x00008010 /* Precharge all ch 1 */
> +
> +/* Channel 0 */
> +wm 32 0x021b001c 0x003f8030 /* Reset */
> +wm 32 0x021b001c 0xff0a8030 /* Calibrate */
> +wm 32 0x021b001c 0x82018030 /* MR1: nWR=6, WC=0, BT=0, BL=BL4 */
> +wm 32 0x021b001c 0x04028030 /* MR2: RL6/WL3 */
> +wm 32 0x021b001c 0x02038030 /* MR3: DS = 40 Ohm */
> +
> +/* Channel 1 */
> +wm 32 0x021b401c 0x003f8030
> +wm 32 0x021b401c 0xff0a8030
> +wm 32 0x021b401c 0x82018030
> +wm 32 0x021b401c 0x04028030
> +wm 32 0x021b401c 0x02038030
> +
> +/* MPDGCTRL disabled, reset fifos */
> +wm 32 0x021b083c 0xa0000000
> +wm 32 0x021b083c 0xa0000000
> +check 32 until_all_bits_clear 0x021b083c 0x80000000
> +wm 32 0x021b483c 0xa0000000
> +wm 32 0x021b483c 0xa0000000
> +check 32 until_all_bits_clear 0x021b483c 0x80000000
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1380003 /* FIXME: Why different? */
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +wm 32 0x021b4020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 0x00000000 /* LPDDR2: Disable ODT! */
> +wm 32 0x021b4818 0x00000000
> +
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b4004 MDPDC_400MHZ
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011006 /* Enable autorefresh */
> +wm 32 0x021b4404 0x00011006 /* Enable autorefresh */
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +wm 32 0x021b401c 0x00000000 /* Disable configuration req */
> +
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* SD1 pad settings */
> +wm 32 0x020e0724 0x0001f0f9
> +wm 32 0x020e0728 0x0001f0f9
> +wm 32 0x020e072c 0x0001f0f9
> +wm 32 0x020e0730 0x0001f0f9
> +wm 32 0x020e0734 0x0001f0f9
> +wm 32 0x020e0738 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> +wm 32 0x020e06cc 0x000130f9
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-victgo.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-victgo.imxcfg
> new file mode 100644
> index 0000000000..58d5183ca0
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-victgo.imxcfg
> @@ -0,0 +1,135 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x0001f0b0
> +
> +#include "padsetup-dl.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_4G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_4G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 MDASP_1GIB25
> +wm 32 0x021b0000 MDCTL_4G_32BIT
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_120
> +wm 32 0x021b4818 MPODTCTRL_ODT_120
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x001f001f
> +wm 32 0x021b4810 0x001f001f
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* RGMII config: MVT doesn't have GRMII, disable! */
> +wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
> +wm 32 0x020e0788 0x00000000 /* disable ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e06c4 0x0001f0f9
> +wm 32 0x020e06c8 0x0001f0f9
> +wm 32 0x020e06cc 0x0001f0f9
> +wm 32 0x020e06d0 0x0001f0f9
> +wm 32 0x020e06d4 0x0001f0f9
> +wm 32 0x020e06d8 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x000130b0
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
> new file mode 100644
> index 0000000000..0612801ee8
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
> @@ -0,0 +1,135 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x000130b0
> +wm 32 0x020e0610 0x0001f0b0
> +
> +#include "padsetup-dl.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011740
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +
> +wm 32 0x021b000c MDCFG0_4G_400MHZ
> +wm 32 0x021b0010 MDCFG1_400MHZ
> +wm 32 0x021b0014 MDCFG2_400MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_4G_400MHZ
> +wm 32 0x021b0008 MDOTC_400MHZ
> +wm 32 0x021b0004 MDPDC_400MHZ
> +wm 32 0x021b0040 MDASP_2GIB25
> +wm 32 0x021b0000 MDCTL_4G
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_400MHZ
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_120
> +wm 32 0x021b4818 MPODTCTRL_ODT_120
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
> +wm 32 0x021b4810 0x00440044
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* RGMII config */
> +wm 32 0x020e0768 0x00080000 /* 1V2 DDR IO */
> +wm 32 0x020e0788 0x00000200 /* 60 Ohm ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e06c4 0x0001f0f9
> +wm 32 0x020e06c8 0x0001f0f9
> +wm 32 0x020e06cc 0x0001f0f9
> +wm 32 0x020e06d0 0x0001f0f9
> +wm 32 0x020e06d4 0x0001f0f9
> +wm 32 0x020e06d8 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> +/* Debug */
> +wm 32 0x020e023c 0x00000005
> +wm 32 0x020e0240 0x00000005
> +wm 32 0x020e060c 0x0001f0b0
> +wm 32 0x020e0610 0x000130b0
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-vicut1q.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-vicut1q.imxcfg
> new file mode 100644
> index 0000000000..096bfa717f
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-vicut1q.imxcfg
> @@ -0,0 +1,140 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e0228 0x00000005
> +/* wm 32 0x020e0244 0x00000005 */
> +wm 32 0x020e05f8 0x000130b0
> +/* wm 32 0x020e0614 0x000130b0 */
> +
> +#include "padsetup-q.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00011742
> +check 32 until_all_bits_clear 0x021b0018 0x00000002
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +check 32 until_any_bit_set 0x021b001c 0x00004000
> +
> +wm 32 0x021b000c MDCFG0_8G_533MHZ_CL7
> +wm 32 0x021b0010 MDCFG1_533MHZ
> +wm 32 0x021b0014 MDCFG2_533MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_8G_533MHZ
> +wm 32 0x021b0008 MDOTC_533MHZ
> +wm 32 0x021b0004 MDPDC_533MHZ
> +wm 32 0x021b0040 MDASP_4GIB00
> +wm 32 0x021b0000 MDCTL_8G
> +// check 32 until_any_bit_set 0x021b0018 0x80000000
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_533MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_533MHZ_CL7
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_60
> +wm 32 0x021b4818 MPODTCTRL_ODT_60
> +
> +/* DQS gating calibration measured on UT2 and UTC boards */
> +wm 32 0x021b083c 0x43000300
> +wm 32 0x021b483c 0x430a0310
> +
> +wm 32 0x021b0840 0x030002b0
> +wm 32 0x021b4840 0x02b00255
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +/* Measured on UT2 and UTC, good averages */
> +wm 32 0x021b0848 0x453a3a3a
> +wm 32 0x021b4848 0x403b3947
> +wm 32 0x021b0850 0x40444540
> +wm 32 0x021b4850 0x46404840
> +
> +/* MPWLDECTRL0,1 */
> +/* Measured and averaged on UT2 and UTC boards */
> +wm 32 0x021b080c 0x00200020
> +wm 32 0x021b0810 0x0026001e
> +wm 32 0x021b480c 0x00100028
> +wm 32 0x021b4810 0x0012001b
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00001006 /* Enable autorefresh */
> +
> +/* Clock configuration (CCM) */
> +/* CCGR0..6 */
> +wm 32 0x020c4068 0x00c03f3f
> +wm 32 0x020c406c 0x0030fc03
> +wm 32 0x020c4070 0x0fffc000
> +wm 32 0x020c4074 0x3ff00000
> +wm 32 0x020c4078 0x00fff300
> +wm 32 0x020c407c 0x0f0000c3
> +wm 32 0x020c4080 0x000003ff
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* DEBUG leds */
> +wm 32 0x020e0244 0x00000005
> +wm 32 0x020e0614 0x000130b0
> +
> +/* RGMII config */
> +wm 32 0x020e0790 0x00080000 /* 1V2 DDR IO */
> +wm 32 0x020e07ac 0x00000200 /* 60 Ohm ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e0724 0x0001f0f9
> +wm 32 0x020e0728 0x0001f0f9
> +wm 32 0x020e072c 0x0001f0f9
> +wm 32 0x020e0730 0x0001f0f9
> +wm 32 0x020e0734 0x0001f0f9
> +wm 32 0x020e0738 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> diff --git a/arch/arm/boards/protonic-imx6/flash-header-vicutp.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-vicutp.imxcfg
> new file mode 100644
> index 0000000000..e19c9eb87e
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/flash-header-vicutp.imxcfg
> @@ -0,0 +1,187 @@
> +soc imx6
> +loadaddr 0x10000000
> +dcdofs 0x400
> +
> +#include "ddr3-defines.imxcfg"
> +
> +/* Debug */
> +wm 32 0x020e0228 0x00000005
> +/* wm 32 0x020e0244 0x00000005 */
> +wm 32 0x020e05f8 0x000130b0
> +/* wm 32 0x020e0614 0x000130b0 */
> +
> +#include "padsetup-q.imxcfg"
> +
> +/* Set Read data delay 3 delay units for all bits */
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b481c 0x33333333
> +wm 32 0x021b4820 0x33333333
> +wm 32 0x021b4824 0x33333333
> +wm 32 0x021b4828 0x33333333
> +
> +/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
> +wm 32 0x021b0018 0x00001742
> +check 32 until_all_bits_clear 0x021b0018 0x00000002
> +
> +/* CSCR: Configuration mode */
> +wm 32 0x021b001c 0x00008000
> +check 32 until_any_bit_set 0x021b001c 0x00004000
> +
> +wm 32 0x021b000c MDCFG0_4G_533MHZ_CL7
> +wm 32 0x021b0010 MDCFG1_533MHZ
> +wm 32 0x021b0014 MDCFG2_533MHZ
> +
> +/* MDRWD */
> +wm 32 0x021b002c 0x000026d2
> +
> +wm 32 0x021b0030 MDOR_4G_533MHZ
> +wm 32 0x021b0008 MDOTC_533MHZ
> +wm 32 0x021b0004 MDPDC_533MHZ
> +wm 32 0x021b0040 MDASP_2GIB25
> +
> +/* Dual-Plus specific configuration */
> +/* MMDC: MAARCR: Disable reordering */
> +wm 32 0x021b0400 0x14420000
> +/* MMDC: MPPDCMPR2: ZQ Offset setting (TODO) */
> +wm 32 0x021b0890 0x00400008 /* Freescale sabre-auto: 0x00400C58 */
> +
> +/* NOC: DDRCONF */
> +/* Sabre-auto: wm 32 0x00bb0008 0x00000000 */
> +/* Values (Address mapping for 64bit):
> + * 0 : 16 Row, 3 Bank, 10 Col interleave (11 Col for 32 bit)
> + * 1 : 15 Row, 3 Bank, 11 Col interleave (12 Col for 32 bit)
> + * 2 : 18 Row, 3 Bank, 8 Col interleave (9 Col for 32 bit)
> + * 3 : 17 Row, 3 Bank, 9 Col interleave (10 Col for 32 bit)
> + * 4 : 2 CS (?), 15 Row, 3 Bank, 10 Col, interleave
> + * ...
> + */
> +wm 32 0x00bb0008 0x00000000
> +
> +/*
> + * NOC DdrTiming:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * ActToAct 533MHz 0x1b (28) 0 0x0000001b
> + * RdToMiss 533MHz 0x10 (16) 6 0x00000400
> + * WrToMiss * 0x1e (30) 12 0x0001e000
> + * BurstLen * 0x4 (8/2) 18 0x00100000
> + * RdToWr * 0x3 (3) 21 0x00600000
> + * WrToRd * 0xa (10) 26 0x28000000
> + * BwRatio * 0x0 (0) 31 0x00000000
> + * ----------------------------------------------------------------
> + */
> +/* Sabre-auto: wm 32 0x00bb000c 0x2891E41A */
> +wm 32 0x00bb000c 0x2871e41c
> +
> +/*
> + * NOC Activate:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * Rrd * 0x6 (6) 0 0x00000006
> + * Faw * 0x1b (27) 4 0x000001b0
> + * FawBank * 0x0 (0) 10 0x00000000
> + * ----------------------------------------------------------------
> + */
> +/* Sabre-auto: wm 32 0x00bb0038 0x00000564 */
> +wm 32 0x00bb0038 0x000001b6
> +
> +/*
> + * NOC ReadLatency: (FIXME)
> + */
> +wm 32 0x00bb0014 0x00000040
> +
> +/*
> + * NOC IPU1/IPU2 aging: (FIXME)
> + */
> +wm 32 0x00bb0028 0x00000020
> +wm 32 0x00bb002c 0x00000020
> +
> +wm 32 0x021b0000 MDCTL_4G
> +// check 32 until_any_bit_set 0x021b0018 0x80000000
> +
> +/* DDR3 MR config */
> +wm 32 0x021b001c DDR3_MR2_533MHZ_RTT_120
> +
> +/*
> + * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
> + */
> +wm 32 0x021b001c 0x00008033
> +
> +wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
> +wm 32 0x021b001c DDR3_MR0_533MHZ_CL7
> +
> +/*
> + * ZQ calibration, n = 0x10 (Precharge all):
> + * Bit 10 = 1: Start ZQ calibration
> + * REGISTER: 0x04008040
> + */
> +wm 32 0x021b001c 0x04008040
> +
> +/* MPZQHWCTRL */
> +wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
> +wm 32 0x021b4800 0xa1390003
> +
> +wm 32 0x021b0020 MDREF_64KHZ
> +
> +wm 32 0x021b0818 MPODTCTRL_ODT_60
> +wm 32 0x021b4818 MPODTCTRL_ODT_60
> +
> +wm 32 0x021b083c MPDGCTRL0_CH0_533MHZ
> +wm 32 0x021b483c MPDGCTRL0_CH1_533MHZ
> +
> +wm 32 0x021b0840 MPDGCTRL1_CH0_533MHZ
> +wm 32 0x021b4840 MPDGCTRL1_CH1_533MHZ
> +
> +/* MPRDDLCTL, MPWRDLCTL */
> +wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
> +wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
> +wm 32 0x021b0850 0x40404040
> +wm 32 0x021b4850 0x40404040
> +
> +/* MPWLDECTRL0,1 */
> +wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
> +wm 32 0x021b0810 0x001f001f
> +wm 32 0x021b480c 0x001f001f
> +wm 32 0x021b4810 0x001f001f
> +
> +/* MPMUR0 */
> +wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
> +wm 32 0x021b48b8 0x00000800
> +
> +/* MDSCR */
> +wm 32 0x021b001c 0x00000000 /* Disable configuration req */
> +
> +/* MAPSR */
> +wm 32 0x021b0404 0x00001006 /* Enable autorefresh */
> +
> +/* enable AXI cache for VDOA/PCIe/VPU/IPU */
> +wm 32 0x020e0010 0xff0000cf
> +/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
> +wm 32 0x020e0018 0x007f007f
> +wm 32 0x020e001c 0x007f007f
> +
> +/* DEBUG leds */
> +wm 32 0x020e0244 0x00000005
> +wm 32 0x020e0614 0x000130b0
> +
> +/* RGMII config */
> +wm 32 0x020e0790 0x00080000 /* 1V2 DDR IO */
> +wm 32 0x020e07ac 0x00000200 /* 60 Ohm ODT */
> +
> +/* SD1 pad settings */
> +wm 32 0x020e0724 0x0001f0f9
> +wm 32 0x020e0728 0x0001f0f9
> +wm 32 0x020e072c 0x0001f0f9
> +wm 32 0x020e0730 0x0001f0f9
> +wm 32 0x020e0734 0x0001f0f9
> +wm 32 0x020e0738 0x0001f0f9
> +
> +/* HDMI to IPU1-ch1, LVDS to IPU1-ch0 */
> +wm 32 0x020e0008 0x00000004
> +wm 32 0x020e000c 0x01e00004
> +
> diff --git a/arch/arm/boards/protonic-imx6/lowlevel.c b/arch/arm/boards/protonic-imx6/lowlevel.c
> new file mode 100644
> index 0000000000..60d809c3aa
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/lowlevel.c
> @@ -0,0 +1,209 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2020 Protonic Holland
> + * Copyright (C) 2020 Oleksij Rempel, Pengutronix
> + */
> +
> +#include <asm/barebox-arm.h>
> +#include <asm/barebox-arm-head.h>
> +#include <common.h>
> +#include <debug_ll.h>
> +#include <linux/sizes.h>
> +#include <mach/iomux-mx6.h>
> +
> +extern char __dtb_z_imx6q_prti6q_start[];
> +extern char __dtb_z_imx6q_prtwd2_start[];
> +extern char __dtb_z_imx6q_vicut1_start[];
> +extern char __dtb_z_imx6dl_alti6p_start[];
> +extern char __dtb_z_imx6dl_lanmcu_start[];
> +extern char __dtb_z_imx6dl_plybas_start[];
> +extern char __dtb_z_imx6dl_plym2m_start[];
> +extern char __dtb_z_imx6dl_prtmvt_start[];
> +extern char __dtb_z_imx6dl_prtrvt_start[];
> +extern char __dtb_z_imx6dl_prtvt7_start[];
> +extern char __dtb_z_imx6dl_victgo_start[];
> +extern char __dtb_z_imx6dl_vicut1_start[];
> +extern char __dtb_z_imx6qp_prtwd3_start[];
> +extern char __dtb_z_imx6qp_vicutp_start[];
> +extern char __dtb_z_imx6ul_prti6g_start[];
> +
> +static inline void setup_uart(void)
> +{
> + void __iomem *iomuxbase = IOMEM(MX6_IOMUXC_BASE_ADDR);
> +
> + imx_setup_pad(iomuxbase, MX6Q_PAD_KEY_COL0__UART4_TXD);
> +
> + imx6_uart_setup_ll();
> +
> + putc_ll('>');
> +}
> +
> +ENTRY_FUNCTION(start_imx6q_prti6q, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + imx6_ungate_all_peripherals();
> +
> + if (IS_ENABLED(CONFIG_DEBUG_LL))
> + setup_uart();
> +
> + fdt = __dtb_z_imx6q_prti6q_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_1G, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6q_prtwd2, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6q_prtwd2_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_512M, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6q_vicut1, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6q_vicut1_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_2G, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6dl_alti6p, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6dl_alti6p_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_1G, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6dl_lanmcu, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6dl_lanmcu_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_256M, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6dl_plybas, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6dl_plybas_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_256M, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6dl_plym2m, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6dl_plym2m_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_256M, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6dl_prtmvt, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6dl_prtmvt_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_512M, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6dl_prtrvt, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6dl_prtrvt_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_256M, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6dl_prtvt7, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6dl_prtvt7_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_512M, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6dl_victgo, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6dl_victgo_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_512M, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6dl_vicut1, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6dl_vicut1_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_2G, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6qp_prtwd3, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6qp_prtwd3_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_512M, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6qp_vicutp, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6qp_vicutp_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x10000000, SZ_2G, fdt);
> +}
> +
> +ENTRY_FUNCTION(start_imx6ul_prti6g, r0, r1, r2)
> +{
> + void *fdt;
> +
> + arm_cpu_lowlevel_init();
> +
> + fdt = __dtb_z_imx6ul_prti6g_start + get_runtime_offset();
> +
> + barebox_arm_entry(0x80000000, SZ_256M, fdt);
> +}
> diff --git a/arch/arm/boards/protonic-imx6/lpddr2-defines.imxcfg b/arch/arm/boards/protonic-imx6/lpddr2-defines.imxcfg
> new file mode 100644
> index 0000000000..29c42cc697
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/lpddr2-defines.imxcfg
> @@ -0,0 +1,384 @@
> +/*
> + * Timing configuration:
> + *
> + * MDCFG0:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tRFC 2Gb 400MHz 0x3f (64) 24 0x3f000000
> + * 4Gb 400MHz 0x77 (120) 24 0x77000000
> + * 8Gb 400MHz 0x8b (140) 24 0x8b000000
> + * 2Gb 533MHz 0x55 (86) 24 0x55000000
> + * 4Gb 533MHz 0x9f (160) 24 0x9f000000
> + * 8Gb 533MHz 0xba (187) 24 0xba000000
> + * 4Gb LPDDR2 0x33 (52) 24 0x33000000
> + * tXS 2Gb 400MHz 0x43 (68) 16 0x00430000
> + * 4Gb 400MHz 0x7b (124) 16 0x007b0000
> + * 8Gb 400MHz 0x8f (144) 16 0x008f0000
> + * 2Gb 533MHz 0x5b (92) 16 0x005b0000
> + * 4Gb 533MHz 0xa5 (166) 16 0x00a50000
> + * 8Gb 533MHz 0xc0 (193) 16 0x00c00000
> + * 4Gb LPDDR2 0x37 (56) 16 0x00370000
> + * tXP * 400MHz 0x2 (3) 13 0x00004000
> + * * 533MHz 0x3 (4) 13 0x00006000
> + * * LPDDR2 0x2 (3) 13 0x00004000
> + * tXPDLL * 400MHz 0x9 (10) 9 0x00001200
> + * * 533MHz 0xc (13) 9 0x00001800
> + * * LPDDR2 0x1 (-) 9 0x00000200
> + * tFAW * 400MHz 0x13 (20) 4 0x00000130
> + * * 533MHz 0x1a (27) 4 0x000001a0
> + * * LPDDR2 0x13 (20) 4 0x00000130
> + * tCL * 400MHz 0x3 (6) 0 0x00000003
> + * * 533MHz-CL7 0x4 (7) 0 0x00000004
> + * * 533MHz-CL8 0x5 (8) 0 0x00000005
> + * * LPDDR2 0x3 (6) 0 0x00000003
> + * ----------------------------------------------------------------
> + */
> +#define MDCFG0_2G_400MHZ 0x3f435333
> +#define MDCFG0_4G_400MHZ 0x777b5333
> +#define MDCFG0_8G_400MHZ 0x8b8f5333
> +#define MDCFG0_2G_533MHZ_CL8 0x555b79a5
> +#define MDCFG0_2G_533MHZ_CL7 0x555b79a4
> +#define MDCFG0_4G_533MHZ_CL8 0x9fa579a5
> +#define MDCFG0_4G_533MHZ_CL7 0x9fa579a4
> +#define MDCFG0_8G_533MHZ_CL8 0xbac079a5
> +#define MDCFG0_8G_533MHZ_CL7 0xbac079a4
> +#define MDCFG0_4G_LPDDR2_CL6 0x33374133
> +#define MDCFG0_8G_LPDDR2_CL6 0x53574133
> +
> +
> +/*
> + * MDCFG1:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tRCD * 400MHz 0x5 (6) 28 0xa0000000
> + * * 533MHz 0x7 (8) 28 0xe0000000
> + * * LPDDR2 0x5 (-) 28 0xa0000000
> + * tRP * 400MHz 0x5 (6) 26 0x14000000
> + * * 533MHz 0x7 (8) 26 0x1c000000
> + * * LPDDR2 0x5 (-) 26 0x14000000
> + * tRC * 400MHz 0x14 (21) 21 0x02800000
> + * * 533MHz 0x1b (28) 21 0x03600000
> + * * LPDDR2 0x15 (-) 21 0x02a00000
> + * tRAS * 400MHz 0x0e (15) 16 0x000e0000
> + * * 533MHz 0x13 (20) 16 0x00130000
> + * * LPDDR2 0x10 (17) 16 0x00100000
> + * tRPA * 0x1 (tRP+1) 15 0x00008000
> + * RM rev 4: unused, read-only! 15 0x00000000
> + * tWR * 400MHz 0x5 (6) 9 0x00000a00
> + * * 533MHz 0x7 (8) 9 0x00000e00
> + * * LPDDR2 0x5 (6) 9 0x00000a00
> + * tMRD * 0x3 (4) 5 0x00000060
> + * max(tMRR,tMRW) LPDDR2 0x4 (5) 5 0x00000080
> + * tCWL * 400MHz 0x3 (5) 0 0x00000003
> + * * 533MHz 0x4 (6) 0 0x00000004
> + * tWL * LPDDR2 0x2 (3) 0 0x00000002
> + * ----------------------------------------------------------------
> + */
> +#define MDCFG1_400MHZ 0xb68e8a63
> +#define MDCFG1_533MHZ 0xff738e64
> +#define MDCFG1_LPDDR2 0x00100a82
> +
> +/*
> + * MDCFG2:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tDLLK * 0x1ff (512) 16 0x01ff0000
> + * LPDDR2 0x0c7 (-) 16 0x00c70000
> + * tRTP * 0x3 (4) 6 0x000000c0
> + * LPDDR2 0x2 (3) 6 0x00000080
> + * tWTR * 0x3 (4) 3 0x00000018
> + * LPDDR2 0x2 (3) 3 0x00000010
> + * tRRD * 400MHz 0x3 (4) 0 0x00000003
> + * * 533MHz 0x5 (6) 0 0x00000005
> + * LPDDR2 0x3 (4) 0 0x00000003
> + * ----------------------------------------------------------------
> + */
> +#define MDCFG2_400MHZ 0x01ff00db
> +#define MDCFG2_533MHZ 0x01ff00dd
> +#define MDCFG2_LPDDR2 0x00000093
> +
> +/*
> + * MDOR:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tXPR 2Gb 400MHz 0x43 (68) 16 0x00430000
> + * 4Gb 400MHz 0x7b (124) 16 0x007b0000
> + * 8Gb 400MHz 0x8f (144) 16 0x008f0000
> + * 2Gb 533MHz 0x5b (92) 16 0x005b0000
> + * 4Gb 533MHz 0xa5 (166) 16 0x00a50000
> + * 8Gb 533MHz 0xc0 (193) 16 0x00c00000
> + * * LPDDR2 0x9f (-) 16 0x009f0000
> + * SDE_to_RST * 0x10 (14) 8 0x00001000
> + * * LPDDR2 0xe (-) 8 0x00000e00
> + * RST_to_CKE * 0x23 (33) 0 0x00000023
> + * * LPDDR2 0x10 (14) 0 0x00000010
> + * ----------------------------------------------------------------
> + */
> +#define MDOR_2G_400MHZ 0x00431023
> +#define MDOR_4G_400MHZ 0x007b1023
> +#define MDOR_8G_400MHZ 0x008f1023
> +#define MDOR_2G_533MHZ 0x005b1023
> +#define MDOR_4G_533MHZ 0x00a51023
> +#define MDOR_8G_533MHZ 0x00c01023
> +#define MDOR_LPDDR2 0x009f0e10
> +
> +/*
> + * MDOTC ODT delays:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * tAOFPD * 400MHz 0x3 (4) 27 0x18000000
> + * * 533MHz 0x4 (5) 27 0x20000000
> + * tAONPD * 400MHz 0x3 (4) 24 0x03000000
> + * * 533MHz 0x4 (5) 24 0x04000000
> + * tANPD * 400MHz 0x3 (4) 20 0x00300000
> + * * 533MHz 0x4 (5) 20 0x00400000
> + * tAXPD * 400MHz 0x3 (4) 16 0x00030000
> + * * 533MHz 0x4 (5) 16 0x00040000
> + * tODTLon * 400MHz 0x3 (3) 12 0x00003000
> + * * 533MHz 0x4 (4) 12 0x00004000
> + * tODTidle_off * 400MHz 0x3 (3) 4 0x00000030
> + * * 533MHz 0x4 (4) 4 0x00000040
> + * ----------------------------------------------------------------
> + */
> +#define MDOTC_400MHZ 0x1b333030
> +#define MDOTC_533MHZ 0x24444040
> +/* LPDDR2: not relevant, leave in reset state!! */
> +
> +/*
> + * MDPDC:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * PRCT_1 * 0x0 28 0x00000000
> + * PRCT_0 * 0x0 24 0x00000000
> + * tCKE * 0x2 (3) 16 0x00020000
> + * PWDT_1 * 0x5 (256) 12 0x00005000
> + * PWDT_0 * 0x5 (256) 8 0x00000500
> + * SLOW_PD * 0x0 (0) 7 0x00000000
> + * BOTH_CS_PD * 0x1 (1) 6 0x00000040
> + * tCKSRX * 400MHz 0x5 (5) 3 0x00000028
> + * * 533MHz 0x6 (6) 3 0x00000030
> + * tCKSRE * 400MHz 0x5 (5) 0 0x00000005
> + * * 533MHz 0x6 (6) 0 0x00000006
> + * ----------------------------------------------------------------
> + */
> +#define MDPDC_400MHZ 0x0002556d
> +#define MDPDC_533MHZ 0x00025576
> +#define MDPDC_LPDDR2 0x00025576 /* FIXME? */
> +
> +/*
> + * MDCTL:
> + * 2Gb: CS0 enable, 14bit ROW, 10bit COL, BL=8, 64bit data
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * SDE_0 * 0x1 (1) 31 0x80000000
> + * SDE_1 * 0x0 (0) 30 0x00000000
> + * SDE_1 LPDDR2 0x1 (1) 30 0x40000000
> + * ROW 2Gb * 0x3 (14) 24 0x03000000
> + * 4Gb * 0x4 (15) 24 0x04000000
> + * 8Gb * 0x5 (16) 24 0x05000000
> + * * LPDDR2 0x3 (14) 24 0x03000000
> + * COL * 0x1 (10) 20 0x00100000
> + * BL * 0x1 (8) 19 0x00080000
> + * LPDDR2 0x0 (4) 19 0x00000000
> + * DSIZ 64bit 0x2 (64) 16 0x00020000
> + * DSIZ 32bit 0x1 (32) 16 0x00010000
> + * DSIZ 16bit 0x0 (16) 16 0x00000000
> + * ----------------------------------------------------------------
> + */
> +#define MDCTL_2G_16BIT 0x83180000
> +#define MDCTL_2G_32BIT 0x83190000
> +#define MDCTL_2G 0x831a0000
> +#define MDCTL_4G_16BIT 0x84180000
> +#define MDCTL_4G_32BIT 0x84190000
> +#define MDCTL_4G 0x841a0000
> +#define MDCTL_8G 0x851a0000
> +#define MDCTL_LPDDR2 0x83110000
> +
> +
> +/*
> + * MDASP Address space partitioning:
> + *
> + * At 0.25GiB, internal address space ends. Above that DDR3 should be
> + * located. The CS1/CS0 split-line determines where:
> + *
> + * For 1x2Gb chips (0.25GiB total on CS0): 0.5GiB
> + * For 2x4Gb chips (1GiB total on CS0): 1.25GiB
> + * For 4x2Gb chips (1GiB total on CS0): 1.25GiB
> + * For 4x4Gb chips (2GiB total on CS0): 2.25GiB
> + * For 4x8Gb chips (4GiB total on CS0): 4.00GiB (maximum possible,
> + * shadowed partially by internal address space).
> + *
> + * Register value Split
> + * ---------------------------
> + * 0x0000000f 0.5GiB
> + * 0x00000017 0.75GiB
> + * 0x00000027 1.25GiB
> + * 0x00000047 2.25GiB
> + * 0x0000007f 4.00GiB
> + */
> +#define MDASP_512MIB 0x0000000f
> +#define MDASP_768MIB 0x00000017
> +#define MDASP_1GIB25 0x00000027
> +#define MDASP_2GIB25 0x00000047
> +#define MDASP_4GIB00 0x0000007f
> +
> +/*
> + * Initialize DDR3 chips
> + * MDSCR: Value = 0xvvvv803n, with 0xvvvv = value, n = Reg. number (BA)
> + */
> +/*
> + * DDR3 chip MR2, n = 2:
> + *
> + * Par. Chip VALUE BITS vvvv
> + * ----------------------------------------------------------------
> + * Rtt(wr) * 0x0 (disabled) 10, 9 0x0000
> + * SR-Temp. * 0x1 (Extended) 7 0x0080
> + * Auto-SR * 0x0 (Manual) 6 0x0000
> + * CWL * 400MHz 0x0 (5tCK) 5, 4, 3 0x0000
> + * * 533MHz 0x1 (6tCK) 5, 4, 3 0x0008
> + * ----------------------------------------------------------------
> + */
> +#define DDR3_MR2_400MHZ_RTT_OFF 0x00808032
> +#define DDR3_MR2_533MHZ_RTT_OFF 0x00888032
> +#define DDR3_MR2_400MHZ_RTT_120 0x04808032
> +#define DDR3_MR2_533MHZ_RTT_120 0x04888032
> +
> +/*
> + * DDR3 chip MR1, n = 1:
> + *
> + * Par. Chip VALUE BITS vvvv
> + * ----------------------------------------------------------------
> + * Qoff * 0x0 (enabled) 12 0x0000
> + * TDQS * 0x0 (disabled) 11 0x0000
> + * Rtt * 0x0 (disabled) 9, 6, 2 0x0000
> + * Write-levelling * 0x0 (disable) 7 0x0000
> + * ODS * 0x0 (RZQ/6=40) 5, 1 0x0000
> + * DLL * 0x0 (enable) 0 0x0000
> + * ----------------------------------------------------------------
> + */
> +#define DDR3_MR1_RTT_OFF_ODS_40 0x00008031
> +#define DDR3_MR1_RTT_120_ODS_40 0x00408031
> +#define DDR3_MR1_RTT_60_ODS_40 0x00048031
> +#define DDR3_MR1_RTT_OFF_ODS_34 0x00028031
> +#define DDR3_MR1_RTT_120_ODS_34 0x00428031
> +#define DDR3_MR1_RTT_60_ODS_34 0x00068031
> +
> +/*
> + * DDR3 chip MR0, n = 0:
> + *
> + * Par. Chip VALUE BITS vvvv
> + * ----------------------------------------------------------------
> + * Precharge PD * 0x1 (fast exit) 12 0x1000
> + * WR 400MHz 0x2 (6) 11,10,9 0x0400
> + * 533MHz 0x4 (8) 11,10,9 0x0800
> + * DLL reset * 0x1 (Yes) 8 0x0100
> + * CL 400MHz 0x4 (6) 6,5,4,2 0x0020
> + * 533MHz 0x6 (7) 6,5,4,2 0x0030
> + * 533MHz 0x8 (8) 6,5,4,2 0x0040
> + * RD burst type * 0x0 (seq.) 3 0x0000
> + * BL * 0x0 (BL8) 0 0x0000
> + * ----------------------------------------------------------------
> + */
> +#define DDR3_MR0_400MHZ 0x15208030
> +#define DDR3_MR0_533MHZ_CL7 0x19308030
> +#define DDR3_MR0_533MHZ_CL8 0x19408030
> +
> +
> +/*
> + * MDREF:
> + * REF_SEL (bit 14,15): 0 (64kHz, needed for high-temp.)
> + * REFR (bit 11, 12, 13): 0x3 (4 refreshes) -> 0x00001800
> + * 0x7 (8 refreshes) -> 0x00003800
> + */
> +#define MDREF_64KHZ 0x00001800
> +#define MDREF_32KHZ 0x00007800
> +
> +/* MPODTCTRL */
> +#define MPODTCTRL_ODT_OFF 0x00000007
> +#define MPODTCTRL_ODT_120 0x00011117
> +#define MPODTCTRL_ODT_60 0x00022227
> +#define MPODTCTRL_ODT_40 0x00033337
> +
> +/*
> + * MPDGCTRL0:
> + *
> + * Channel 0:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * RST_RD_FIFO * 0 31 0x00000000
> + * DG_CMP_CYC * 1 30 0x40000000
> + * DG_DIS * 0 29 0x00000000
> + * HW_DG_EN * 0 28 0x00000000
> + * DG_HC_DEL1 400MHz 2 24 0x02000000
> + * 533MHz 3 24 0x03000000
> + * DG_EXT_UP * 0 23 0x00000000
> + * DG_DL_ABS_OFFS1 400MHz 0x35 16 0x00350000
> + * 533MHz 0x4b 16 0x004b0000
> + * DG_HC_DEL0 400MHz 2 8 0x00000200
> + * 533MHz 3 8 0x00000300
> + * DG_DL_ABS_OFFS0 400MHz 0x35 0 0x00000031
> + * 533MHz 0x4b 0 0x00000050
> + * ----------------------------------------------------------------
> + */
> +#define MPDGCTRL0_CH0_400MHZ 0x42350231
> +#define MPDGCTRL0_CH0_533MHZ 0x434b0350
> +/*
> + *
> + * Channel 1:
> + *
> + * DG_HC_DEL1 (5) 400MHz 2 24 0x02000000
> + * 533MHz 3 24 0x03000000
> + * DG_DL_ABS_OFFS1 (5) 400MHz 0x35 16 0x00350000
> + * 533MHz 0x4b 16 0x004b0000
> + * DG_HC_DEL0 (4) 400MHz 2 8 0x00000200
> + * 533MHz 3 8 0x00000300
> + * DG_DL_ABS_OFFS0 (4) 400MHz 0x35 0 0x00000031
> + * 533MHz 0x4b 0 0x00000050
> + * ----------------------------------------------------------------
> + */
> +#define MPDGCTRL0_CH1_400MHZ 0x42350231
> +#define MPDGCTRL0_CH1_533MHZ 0x434b0350
> +
> +/*
> + * MPDGCTRL1:
> + *
> + * Channel 0:
> + *
> + * Par. Chip VALUE SHIFT Reg. field
> + * ----------------------------------------------------------------
> + * DG_HC_DEL3 400MHz 2 24 0x02000000
> + * 533MHz 3 24 0x03000000
> + * DG_DL_ABS_OFFS3 400MHz 0x1a 16 0x001a0000
> + * 533MHz 0x4c 16 0x004c0000
> + * DG_HC_DEL2 400MHz 2 8 0x00000200
> + * 533MHz 3 8 0x00000300
> + * DG_DL_ABS_OFFS2 400MHz 0x18 0 0x00000018
> + * 533MHz 0x59 0 0x00000059
> + * ----------------------------------------------------------------
> + */
> +#define MPDGCTRL1_CH0_400MHZ 0x021a0218
> +#define MPDGCTRL1_CH0_533MHZ 0x034c0359
> +/*
> + *
> + * Channel 1:
> + *
> + * DG_HC_DEL3 (7) 400MHz 2 24 0x02000000
> + * 533MHz 3 24 0x03000000
> + * DG_DL_ABS_OFFS3 (7) 400MHz 0x1a 16 0x001a0000
> + * 533MHz 0x65 16 0x00650000
> + * DG_HC_DEL2 (6) 400MHz 2 8 0x00000200
> + * 533MHz 3 8 0x00000300
> + * DG_DL_ABS_OFFS2 (6) 400MHz 0x18 0 0x00000018
> + * 533MHz 0x48 0 0x00000048
> + * ----------------------------------------------------------------
> + */
> +#define MPDGCTRL1_CH1_400MHZ 0x021a0218
> +#define MPDGCTRL1_CH1_533MHZ 0x03650348
> diff --git a/arch/arm/boards/protonic-imx6/padsetup-dl.imxcfg b/arch/arm/boards/protonic-imx6/padsetup-dl.imxcfg
> new file mode 100644
> index 0000000000..f60d37f63e
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/padsetup-dl.imxcfg
> @@ -0,0 +1,70 @@
> +
> +/*
> + * Some defines for PAD setup:
> + * Unfortunately we don't have a powerful pre-processor, so we need to
> + * define explicit 32-bit hex values.
> + */
> +#define PAD_DSE_48 0x00000028
> +#define PAD_DSE_40 0x00000030
> +
> +#define PAD_DIFF_IN_DSE_48 0x00020028
> +#define PAD_DIFF_IN_DSE_40 0x00020030
> +#define PAD_DIFF_IN_DSE_34 0x00020038
> +
> +/* Disable ISB LED ASAP */
> +wm 32 0x020e04a8 0x000130b0
> +
> +#define PAD_SDQS PAD_DSE_48
> +wm 32 0x020e04bc PAD_SDQS /* SDQS0_P */
> +wm 32 0x020e04c0 PAD_SDQS /* SDQS1_P */
> +wm 32 0x020e04c4 PAD_SDQS /* SDQS2_P */
> +wm 32 0x020e04c8 PAD_SDQS /* SDQS3_P */
> +wm 32 0x020e04cc PAD_SDQS /* SDQS4_P */
> +wm 32 0x020e04d0 PAD_SDQS /* SDQS5_P */
> +wm 32 0x020e04d4 PAD_SDQS /* SDQS6_P */
> +wm 32 0x020e04d8 PAD_SDQS /* SDQS7_P */
> +
> +#define PAD_DQM_CTRL PAD_DIFF_IN_DSE_48
> +#define PAD_SDCLK PAD_DIFF_IN_DSE_40
> +wm 32 0x020e0470 PAD_DQM_CTRL /* DQM0 */
> +wm 32 0x020e0474 PAD_DQM_CTRL /* DQM1 */
> +wm 32 0x020e0478 PAD_DQM_CTRL /* DQM2 */
> +wm 32 0x020e047c PAD_DQM_CTRL /* DQM3 */
> +wm 32 0x020e0480 PAD_DQM_CTRL /* DQM4 */
> +wm 32 0x020e0484 PAD_DQM_CTRL /* DQM5 */
> +wm 32 0x020e0488 PAD_DQM_CTRL /* DQM6 */
> +wm 32 0x020e048c PAD_DQM_CTRL /* DQM7 */
> +wm 32 0x020e0464 PAD_DQM_CTRL /* CAS */
> +wm 32 0x020e0490 PAD_DQM_CTRL /* RAS */
> +wm 32 0x020e04ac PAD_SDCLK /* SDCLK0_P */
> +wm 32 0x020e04b0 PAD_SDCLK /* SDCLK1_P */
> +wm 32 0x020e0494 PAD_DQM_CTRL /* RESET */
> +
> +/* 0x00003000 = 100k PU */
> +wm 32 0x020e04a4 0x00003000 /* SDCKE0 */
> +wm 32 0x020e04a8 0x00003000 /* SDCKE1 */
> +wm 32 0x020e04a0 0x00000000 /* SDBA2: disable PU */
> +
> +/* 0x00003030 = PU + 40 Ohm drive */
> +wm 32 0x020e04b4 0x00003030 /* ODT0 */
> +wm 32 0x020e04b8 0x00003030 /* ODT1 */
> +
> +#define PAD_BxDS PAD_DSE_48
> +wm 32 0x020e0764 PAD_BxDS /* B0DS */
> +wm 32 0x020e0770 PAD_BxDS /* B1DS */
> +wm 32 0x020e0778 PAD_BxDS /* B2DS */
> +wm 32 0x020e077c PAD_BxDS /* B3DS */
> +wm 32 0x020e0780 PAD_BxDS /* B4DS */
> +wm 32 0x020e0784 PAD_BxDS /* B5DS */
> +wm 32 0x020e078c PAD_BxDS /* B6DS */
> +wm 32 0x020e0748 PAD_BxDS /* B7DS */
> +wm 32 0x020e074c PAD_DSE_48 /* ADDDS */
> +
> +wm 32 0x020e0750 0x00020000 /* DDRMODE_CTL */
> +wm 32 0x020e0754 0x00000000 /* DDRPKE disable PU */
> +wm 32 0x020e0760 0x00020000 /* DDRMODE data */
> +
> +wm 32 0x020e076c 0x00000030 /* CTLDS 40 Ohm */
> +
> +wm 32 0x020e0774 0x000c0000 /* DDR_TYPE DDR3 */
> +
> diff --git a/arch/arm/boards/protonic-imx6/padsetup-q.imxcfg b/arch/arm/boards/protonic-imx6/padsetup-q.imxcfg
> new file mode 100644
> index 0000000000..f5fa3e8d28
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/padsetup-q.imxcfg
> @@ -0,0 +1,69 @@
> +
> +/*
> + * Some defines for PAD setup:
> + * Unfortunately we don't have a powerful pre-processor, so we need to
> + * define explicit 32-bit hex values.
> + */
> +#define PAD_DSE_48 0x00000028
> +#define PAD_DSE_40 0x00000030
> +
> +#define PAD_DIFF_IN_DSE_48 0x00020028
> +#define PAD_DIFF_IN_DSE_40 0x00020030
> +#define PAD_DIFF_IN_DSE_34 0x00020038
> +
> +/* Disable ISB LED ASAP */
> +wm 32 0x020e0420 0x000130b0
> +
> +#define PAD_SDQS PAD_DSE_48
> +wm 32 0x020e05a8 PAD_SDQS /* SDQS0_P */
> +wm 32 0x020e05b0 PAD_SDQS /* SDQS1_P */
> +wm 32 0x020e0524 PAD_SDQS /* SDQS2_P */
> +wm 32 0x020e051c PAD_SDQS /* SDQS3_P */
> +wm 32 0x020e0518 PAD_SDQS /* SDQS4_P */
> +wm 32 0x020e050c PAD_SDQS /* SDQS5_P */
> +wm 32 0x020e05b8 PAD_SDQS /* SDQS6_P */
> +wm 32 0x020e05c0 PAD_SDQS /* SDQS7_P */
> +
> +#define PAD_DQM_CTRL PAD_DIFF_IN_DSE_48
> +#define PAD_SDCLK PAD_DIFF_IN_DSE_40
> +wm 32 0x020e05ac PAD_DQM_CTRL /* DQM0 */
> +wm 32 0x020e05b4 PAD_DQM_CTRL /* DQM1 */
> +wm 32 0x020e0528 PAD_DQM_CTRL /* DQM2 */
> +wm 32 0x020e0520 PAD_DQM_CTRL /* DQM3 */
> +wm 32 0x020e0514 PAD_DQM_CTRL /* DQM4 */
> +wm 32 0x020e0510 PAD_DQM_CTRL /* DQM5 */
> +wm 32 0x020e05bc PAD_DQM_CTRL /* DQM6 */
> +wm 32 0x020e05c4 PAD_DQM_CTRL /* DQM7 */
> +wm 32 0x020e056c PAD_DQM_CTRL /* CAS */
> +wm 32 0x020e0578 PAD_DQM_CTRL /* RAS */
> +wm 32 0x020e0588 PAD_SDCLK /* SDCLK0_P */
> +wm 32 0x020e0594 PAD_SDCLK /* SDCLK1_P */
> +wm 32 0x020e057c PAD_DQM_CTRL /* RESET */
> +
> +/* 0x00003000 = 100k PU */
> +wm 32 0x020e0590 0x00003000 /* SDCKE0 */
> +wm 32 0x020e0598 0x00003000 /* SDCKE1 */
> +wm 32 0x020e058c 0x00000000 /* SDBA2: disable PU */
> +
> +/* 0x00003030 = PU + 40 Ohm drive */
> +wm 32 0x020e059c 0x00003030 /* ODT0 */
> +wm 32 0x020e05a0 0x00003030 /* ODT1 */
> +
> +#define PAD_BxDS PAD_DSE_48
> +wm 32 0x020e0784 PAD_BxDS /* B0DS */
> +wm 32 0x020e0788 PAD_BxDS /* B1DS */
> +wm 32 0x020e0794 PAD_BxDS /* B2DS */
> +wm 32 0x020e079c PAD_BxDS /* B3DS */
> +wm 32 0x020e07a0 PAD_BxDS /* B4DS */
> +wm 32 0x020e07a4 PAD_BxDS /* B5DS */
> +wm 32 0x020e07a8 PAD_BxDS /* B6DS */
> +wm 32 0x020e0748 PAD_BxDS /* B7DS */
> +wm 32 0x020e074c PAD_DSE_48 /* ADDDS */
> +
> +wm 32 0x020e0750 0x00020000 /* DDRMODE_CTL */
> +wm 32 0x020e0758 0x00000000 /* DDRPKE disable PU */
> +wm 32 0x020e0774 0x00020000 /* DDRMODE data */
> +
> +wm 32 0x020e078c 0x00000030 /* CTLDS 40 Ohm */
> +
> +wm 32 0x020e0798 0x000c0000 /* DDR_TYPE DDR3 */
> diff --git a/arch/arm/boards/protonic-imx6/padsetup-ul.imxcfg b/arch/arm/boards/protonic-imx6/padsetup-ul.imxcfg
> new file mode 100644
> index 0000000000..e36601942d
> --- /dev/null
> +++ b/arch/arm/boards/protonic-imx6/padsetup-ul.imxcfg
> @@ -0,0 +1,42 @@
> +
> +/*
> + * Some defines for PAD setup:
> + * Unfortunately we don't have a powerful pre-processor, so we need to
> + * define explicit 32-bit hex values.
> + */
> +
> +#define PAD_DSE_48 0x00000028
> +#define PAD_DSE_40 0x00000030
> +
> +#define PAD_SDQS PAD_DSE_48
> +wm 32 0x020e0280 PAD_SDQS /* SDQS0_P */
> +wm 32 0x020e0284 PAD_SDQS /* SDQS1_P */
> +
> +#define PAD_DQM_CTRL PAD_DSE_48
> +#define PAD_SDCLK PAD_DSE_48
> +
> +wm 32 0x020e0244 PAD_DQM_CTRL /* DQM0 */
> +wm 32 0x020e0248 PAD_DQM_CTRL /* DQM1 */
> +wm 32 0x020e024c PAD_DQM_CTRL /* RAS */
> +wm 32 0x020e0250 PAD_DQM_CTRL /* CAS */
> +wm 32 0x020e027c PAD_SDCLK /* SDCLK0_P */
> +wm 32 0x020e0288 PAD_DQM_CTRL /* RESET */
> +
> +wm 32 0x020e0270 0x00000000 /* SDBA2: disable PU */
> +
> +wm 32 0x020e0260 PAD_DSE_48 /* ODT0 */
> +wm 32 0x020e0264 PAD_DSE_48 /* ODT1 */
> +
> +#define PAD_BxDS PAD_DSE_48
> +wm 32 0x020e0498 PAD_BxDS /* B0DS */
> +wm 32 0x020e04a4 PAD_BxDS /* B1DS */
> +
> +wm 32 0x020e0490 PAD_DSE_48 /* ADDDS */
> +
> +wm 32 0x020e0494 0x00020000 /* DDRMODE_CTL */
> +wm 32 0x020e04ac 0x00000000 /* DDRPKE disable PU */
> +wm 32 0x020e04b0 0x00020000 /* DDRMODE data */
> +
> +wm 32 0x020e04a0 0x00000030 /* CTLDS 40 Ohm */
> +
> +wm 32 0x020e04b4 0x000c0000 /* DDR_TYPE DDR3 */
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 1aeaa61e01..8afeb45016 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -74,6 +74,22 @@ lwl-dtb-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += imx7d-phyboard-zeta.dtb.o
> lwl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += imx8mq-phytec-phycore-som.dtb.o
> lwl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
> lwl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o
> +lwl-dtb-$(CONFIG_MACH_PROTONIC_IMX6) += \
> + imx6q-prti6q.dtb.o \
> + imx6q-prtwd2.dtb.o \
> + imx6q-vicut1.dtb.o \
> + imx6dl-alti6p.dtb.o \
> + imx6dl-lanmcu.dtb.o \
> + imx6dl-plybas.dtb.o \
> + imx6dl-plym2m.dtb.o \
> + imx6dl-prtmvt.dtb.o \
> + imx6dl-prtrvt.dtb.o \
> + imx6dl-prtvt7.dtb.o \
> + imx6dl-victgo.dtb.o \
> + imx6dl-vicut1.dtb.o \
> + imx6qp-prtwd3.dtb.o \
> + imx6qp-vicutp.dtb.o \
> + imx6ul-prti6g.dtb.o
> lwl-dtb-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
> lwl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
> lwl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
> diff --git a/arch/arm/dts/imx6dl-alti6p.dts b/arch/arm/dts/imx6dl-alti6p.dts
> new file mode 100644
> index 0000000000..8d53100bea
> --- /dev/null
> +++ b/arch/arm/dts/imx6dl-alti6p.dts
> @@ -0,0 +1,118 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2016 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6dl.dtsi>
> +#include "imx6qdl-prti6q.dtsi"
> +
> +/ {
> + model = "Altesco I6P Board";
> + compatible = "alt,alti6p", "fsl,imx6dl";
> +
> + memory@10000000 {
> + device_type = "memory";
> + reg = <0x10000000 0x40000000>;
> + };
> +};
> +
> +&hdmi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hdmi>;
> + ddc-i2c-bus = <&i2c1>;
> + status = "okay";
> +};
> +
> +/* DDC */
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + rtc: pcf8563@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rmii";
> + phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
> + clocks = <&clks IMX6QDL_CLK_ENET>,
> + <&clks IMX6QDL_CLK_ENET>;
> + clock-names = "ipg", "ahb";
> + status = "okay";
> +};
> +
> +&i2c2 {
> + clock-frequency = <50000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + clock-frequency = <50000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c4>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f058
> + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
> + /* power enable, high active */
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
> + >;
> + };
> +
> + pinctrl_hdmi: hdmigrp {
> + fsl,pins = <
> + /* NOTE: DDC is done via I2C2, so DON'T configure DDC pins for HDMI! */
> + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c4: i2c4grp {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_CS3__I2C4_SDA 0x4001f8b1
> + MX6QDL_PAD_NANDF_WP_B__I2C4_SCL 0x4001f8b1
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP4 */
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
> + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
> +
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
> + /* Phy reset */
> + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
> + /* nINTRP */
> + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6dl-lanmcu.dts b/arch/arm/dts/imx6dl-lanmcu.dts
> new file mode 100644
> index 0000000000..b05ed9c3ba
> --- /dev/null
> +++ b/arch/arm/dts/imx6dl-lanmcu.dts
> @@ -0,0 +1,434 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2019 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6dl.dtsi>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "LANMCU";
> + compatible = "lan,lanmcu", "fsl,imx6dl";
> +
> + chosen {
> + stdout-path = &uart4;
> + };
> +
> + memory {
> + reg = <0x10000000 0x10000000>;
> + };
> +
> + reg_usb_otg_vbus: otg-vbus-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "regulator-OTG-VBUS";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio3 22 0>;
> + enable-active-high;
> + };
> +
> + usdhc2_pwrseq: usdhc2_pwrseq {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wlan_npd>;
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
> + };
> +
> + display: display0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ipu1_disp>;
> + compatible = "fsl,imx-parallel-display";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interface-pix-fmt = "bgr666";
> + status = "okay";
> +
> + port@0 {
> + reg = <0>;
> +
> + display_in: endpoint {
> + remote-endpoint = <&ipu1_di0_disp0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + display_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +
> + panel {
> + compatible = "edt,etm0700g0bdh6";
> + backlight = <&backlight_lcd>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
> +
> + backlight_lcd: backlight_lcd {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 5000000>;
> + brightness-levels = <0 5 7 9 12 15 20 27 35 47 62 81 107 142 188 248
> + 328 433 573 757 1000>;
> + default-brightness-level = <20>;
> + status = "okay";
> + };
> +
> + leds: leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + debug0 {
> + label = "debug0";
> + gpios = <&gpio1 8 0>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + prti6q {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* HW revision detect */
> + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
> + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
> + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
> + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
> + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 /* REV_ID4 */
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
> + /* power enable, high active */
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
> + >;
> + };
> +
> + pinctrl_ipu1_disp: ipudisp1grp {
> + fsl,pins = <
> + /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
> + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30
> + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30
> + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30
> + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30
> + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30
> + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30
> + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30
> + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30
> + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30
> + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30
> + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30
> + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30
> + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30
> + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30
> + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30
> + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30
> + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30
> + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30
> + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30
> + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30
> + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30
> + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP4 */
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
> + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
> +
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
> + /* Phy reset */
> + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
> + /* nINTRP */
> + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
> + >;
> + };
> +
> + pinctrl_wlan_npd: wlan_npd {
> + fsl,pins = <
> + /* WL_REG_ON */
> + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b1
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
> + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
> + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
> + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
> + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
> + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
> + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
> + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
> + MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b0
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
> + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
> + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
> + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
> + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
> + >;
> + };
> +
> + pinctrl_can1: can1grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
> + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
> + >;
> + };
> +
> + pinctrl_can2: can2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
> + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
> + >;
> + };
> +
> + pinctrl_ts_edt: ts1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
> + >;
> + };
> + };
> +};
> +
> +&ipu1_di0_disp0 {
> + remote-endpoint = <&display_in>;
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rmii";
> + phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
> + clocks = <&clks IMX6QDL_CLK_ENET>,
> + <&clks IMX6QDL_CLK_ENET>;
> + clock-names = "ipg", "ahb";
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + linux,rs485-enabled-at-boot-time;
> + rts-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + linux,rs485-enabled-at-boot-time;
> + rts-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> +&usbotg {
> + vbus-supply = <®_usb_otg_vbus>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + phy_type = "utmi";
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + rtc: pcf8563@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +
> + touchscreen: edt_ft5406@38 {
> + compatible = "edt,edt-ft5406";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ts_edt>;
> + reg = <0x38>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
> +
> + touchscreen-size-x = <1792>;
> + touchscreen-size-y = <1024>;
> +
> + touchscreen-fuzz-x = <0>;
> + touchscreen-fuzz-y = <0>;
> +
> + /* Touch screen calibration */
> + threshold = <50>;
> + gain = <5>;
> + offset = <10>;
> + };
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + no-1-8-v;
> + non-removable;
> + mmc-pwrseq = <&usdhc2_pwrseq>;
> + pm-ignore-notify;
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + brcmf: bcrmf@1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +
> + partitions {
> + /*
> + * Map a partition at the last 64k of the area available for
> + * the second stage bootloader.
> + */
> + compatible = "fixed-partitions";
> + #size-cells = <1>;
> + #address-cells = <1>;
> +
> + bootstate_backend: bootstate_backend@f0000 {
> + reg = <0xf0000 0x10000>;
> + label = "bootstate";
> + };
> + };
> +};
> +
> +&can1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can1>;
> + status = "okay";
> +};
> +
> +&can2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can2>;
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/imx6dl-plybas.dts b/arch/arm/dts/imx6dl-plybas.dts
> new file mode 100644
> index 0000000000..de0ba05e13
> --- /dev/null
> +++ b/arch/arm/dts/imx6dl-plybas.dts
> @@ -0,0 +1,186 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6dl.dtsi>
> +#include "imx6qdl-vicut1.dtsi"
> +
> +/ {
> + model = "Plymovent BAS board";
> + compatible = "ply,plybas", "fsl,imx6dl";
> +
> + memory {
> + reg = <0x10000000 0x10000000>;
> + };
> +
> + backlight_lcd {
> + status = "disabled";
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + autorepeat;
> + button@20 {
> + label = "START";
> + linux,code = <31>;
> + gpios = <&gpio5 8 1>;
> + };
> + button@21 {
> + label = "CLEAN";
> + linux,code = <46>;
> + gpios = <&gpio5 9 1>;
> + };
> + };
> +
> + leds: leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + debug0 {
> + label = "debug0";
> + gpios = <&gpio1 8 0>;
> + };
> +
> + debug1 {
> + label = "debug1";
> + gpios = <&gpio1 9 0>;
> + };
> +
> + light_tower1 {
> + label = "light_tower1";
> + gpios = <&gpio4 22 0>;
> + linux,default-trigger = "heartbeat";
> + };
> +
> + light_tower2 {
> + label = "light_tower2";
> + gpios = <&gpio4 23 0>;
> + };
> +
> + light_tower3 {
> + label = "light_tower3";
> + gpios = <&gpio4 24 0>;
> + };
> +
> + light_tower4 {
> + label = "light_tower4";
> + gpios = <&gpio4 25 0>;
> + };
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rmii";
> + phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
> + clocks = <&clks IMX6QDL_CLK_ENET>,
> + <&clks IMX6QDL_CLK_ENET>;
> + clock-names = "ipg", "ahb";
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + fsl,uart-has-rtscts;
> + linux,rs485-enabled-at-boot-time;
> + rs485-rts-delay = <0 20>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* CAN1_SR + CAN2_SR GPIO outputs */
> + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
> + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13070
> +
> + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* YACO_nIRQ */
> + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 /* YACO_BOOT0 */
> + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* YACO_nRESET */
> +
> + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x13070 /* BUZZER */
> + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x13070 /* ANA_OUT_SD */
> + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 /* ANA_OUT_ERR */
> +
> + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x13070 /* RELAY1 */
> + MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x13070 /* RELAY2 */
> +
> + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0 /* IN1 */
> + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 /* IN2 */
> + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b0 /* IN3 */
> + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b0 /* IN4 */
> + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 /* IN5 */
> + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 /* IN6 */
> + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 /* IN7 */
> + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 /* IN8 */
> + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 /* IN9 */
> + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 /* IN10 */
> + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* IN11 */
> + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 /* IN12 */
> +
> + MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1a0b0 /* HMI */
> +
> + /* HW revision detect */
> + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
> + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
> + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
> + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
> + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 /* REV_ID4 */
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* DEBUG0 */
> + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* DEBUG1 */
> +
> + MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x13070 /* LED1 (lighttower) */
> + MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x13070 /* LED2 (lighttower) */
> + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x13070 /* LED3 (lighttower) */
> + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x13070 /* LED4 (lighttower) */
> + >;
> + };
> +
> + /* RS485 UART */
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x130b1
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP4 */
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
> + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
> +
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
> + /* Phy reset */
> + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
> + /* nINTRP */
> + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6dl-plym2m.dts b/arch/arm/dts/imx6dl-plym2m.dts
> new file mode 100644
> index 0000000000..b66321fb46
> --- /dev/null
> +++ b/arch/arm/dts/imx6dl-plym2m.dts
> @@ -0,0 +1,132 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6dl.dtsi>
> +#include "imx6qdl-prti6q.dtsi"
> +
> +/ {
> + model = "Plymovent M2M board";
> + compatible = "ply,plym2m", "fsl,imx6dl";
> +
> + memory {
> + reg = <0x10000000 0x10000000>;
> + };
> +
> + leds: leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + debug0 {
> + label = "debug0";
> + gpios = <&gpio1 8 0>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rmii";
> + phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
> + clocks = <&clks IMX6QDL_CLK_ENET>,
> + <&clks IMX6QDL_CLK_ENET>;
> + clock-names = "ipg", "ahb";
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* CAN1_SR GPIO output */
> + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
> +
> + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* CAN1_TERM */
> + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 /* TSC_BUSY */
> +
> + /* HW revision detect */
> + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
> + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
> + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
> + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
> + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 /* REV_ID4 */
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
> + /* power enable, high active */
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
> + >;
> + };
> +
> + pinctrl_ipu1_disp: ipudisp1grp {
> + fsl,pins = <
> + /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
> + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30
> + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30
> + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30
> + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30
> + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30
> + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30
> + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30
> + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30
> + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30
> + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30
> + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30
> + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30
> + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30
> + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30
> + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30
> + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30
> + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30
> + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30
> + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30
> + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30
> + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30
> + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP4 */
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
> + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
> +
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
> + /* Phy reset */
> + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
> + /* nINTRP */
> + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_backlight_m2m: backlightm2mgrp {
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6dl-prtmvt.dts b/arch/arm/dts/imx6dl-prtmvt.dts
> new file mode 100644
> index 0000000000..05fce7178f
> --- /dev/null
> +++ b/arch/arm/dts/imx6dl-prtmvt.dts
> @@ -0,0 +1,164 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6dl.dtsi>
> +#include "imx6qdl-vicut1.dtsi"
> +
> +/ {
> + model = "Protonic MVT board";
> + compatible = "prt,prtmvt", "fsl,imx6dl";
> +
> + memory {
> + reg = <0x10000000 0x20000000>;
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + autorepeat;
> +
> + button@20 {
> + label = "GPIO Key F1";
> + linux,code = <59>;
> + gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
> + };
> + button@21 {
> + label = "GPIO Key F2";
> + linux,code = <60>;
> + gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
> + };
> + button@22 {
> + label = "GPIO Key F3";
> + linux,code = <61>;
> + gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
> + };
> + button@23 {
> + label = "GPIO Key F4";
> + linux,code = <62>;
> + gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
> + };
> + button@24 {
> + label = "GPIO Key F5";
> + linux,code = <63>;
> + gpios = <&pca_gpio 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + // Center
> + button@25 {
> + label = "GPIO Key CYCLE";
> + linux,code = <154>;
> + gpios = <&pca_gpio 5 GPIO_ACTIVE_LOW>;
> + };
> + button@26 {
> + label = "GPIO Key ESC";
> + linux,code = <1>;
> + gpios = <&pca_gpio 6 GPIO_ACTIVE_LOW>;
> + };
> + button@27 {
> + label = "GPIO Key UP";
> + linux,code = <103>;
> + gpios = <&pca_gpio 7 GPIO_ACTIVE_LOW>;
> + };
> + button@28 {
> + label = "GPIO Key DOWN";
> + linux,code = <108>;
> + gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
> + };
> + button@29 {
> + label = "GPIO Key OK";
> + linux,code = <0x160>;
> + gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
> + };
> +
> + button@2a {
> + label = "GPIO Key F6";
> + linux,code = <64>;
> + gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
> + };
> + button@2b {
> + label = "GPIO Key F7";
> + linux,code = <65>;
> + gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
> + };
> + button@2c {
> + label = "GPIO Key F8";
> + linux,code = <66>;
> + gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
> + };
> + button@2d {
> + label = "GPIO Key F9";
> + linux,code = <67>;
> + gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
> + };
> + button@2e {
> + label = "GPIO Key F10";
> + linux,code = <68>;
> + gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rmii";
> + phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
> + clocks = <&clks IMX6QDL_CLK_ENET>,
> + <&clks IMX6QDL_CLK_ENET>;
> + clock-names = "ipg", "ahb";
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "disabled";
> +};
> +
> +&pcie {
> + status = "disabled";
> +};
> +
> +&i2c1 {
> + pca_gpio: gpio@74 {
> + #gpio-cells = <2>;
> + compatible = "nxp,pca9539";
> + reg = <0x74>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pca9539>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + gpio-controller;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP4 */
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
> + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
> +
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
> + /* Phy reset */
> + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
> + /* nINTRP */
> + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
> + >;
> + };
> +
> + pinctrl_pca9539: pca9539 {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6dl-prtrvt.dts b/arch/arm/dts/imx6dl-prtrvt.dts
> new file mode 100644
> index 0000000000..802bd50ae6
> --- /dev/null
> +++ b/arch/arm/dts/imx6dl-prtrvt.dts
> @@ -0,0 +1,182 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6dl.dtsi>
> +#include "imx6qdl-prti6q.dtsi"
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + model = "Protonic RVT board";
> + compatible = "prt,prtrvt", "fsl,imx6dl";
> +
> + memory@10000000 {
> + device_type = "memory";
> + reg = <0x10000000 0x10000000>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + led-debug0 {
> + function = LED_FUNCTION_STATUS;
> + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&can1 {
> + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
> +};
> +
> +&ecspi1 {
> + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +};
> +
> +&ecspi3 {
> + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi3>;
> + status = "okay";
> +
> + nfc@0 {
> + compatible = "ti,trf7970a";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_nfc>;
> + spi-max-frequency = <2000000>;
> + interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
> + ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
> + <&gpio5 11 GPIO_ACTIVE_LOW>;
> + vin-supply = <®_3v3>;
> + vin-voltage-override = <3100000>;
> + autosuspend-delay = <30000>;
> + irq-status-read-quirk;
> + en2-rf-quirk;
> + t5t-rmb-extra-byte-quirk;
> + status = "okay";
> + };
> +};
> +
> +&i2c3 {
> + adc@49 {
> + compatible = "ti,ads1015";
> + reg = <0x49>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* nc */
> + channel@4 {
> + reg = <4>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> +
> + /* nc */
> + channel@5 {
> + reg = <5>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> +
> + /* can1_l */
> + channel@6 {
> + reg = <6>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> +
> + /* can1_h */
> + channel@7 {
> + reg = <7>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> + };
> +
> + rtc@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +};
> +
> +&pcie {
> + status = "okay";
> +};
> +
> +&usbh1 {
> + status = "disabled";
> +};
> +
> +&vpu {
> + status = "disabled";
> +};
> +
> +&iomuxc {
> + pinctrl_can1phy: can1phy {
> + fsl,pins = <
> + /* CAN1_SR */
> + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
> + /* CAN1_TERM */
> + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
> + >;
> + };
> +
> + pinctrl_ecspi1: ecspi1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
> + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
> + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
> + /* CS */
> + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
> + >;
> + };
> +
> + pinctrl_ecspi3: ecspi3grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
> + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
> + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
> + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
> + >;
> + };
> +
> + pinctrl_nfc: nfcgrp {
> + fsl,pins = <
> + /* NFC_ASK_OOK */
> + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x100b1
> + /* NFC_PWR_EN */
> + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x100b1
> + /* NFC_EN2 */
> + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x100b1
> + /* NFC_EN */
> + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
> + /* NFC_MOD */
> + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1
> + /* NFC_IRQ */
> + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6dl-prtvt7.dts b/arch/arm/dts/imx6dl-prtvt7.dts
> new file mode 100644
> index 0000000000..c202e6786d
> --- /dev/null
> +++ b/arch/arm/dts/imx6dl-prtvt7.dts
> @@ -0,0 +1,472 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2016 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6dl.dtsi>
> +#include "imx6qdl-prti6q.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +
> +/ {
> + model = "Protonic VT7";
> + compatible = "prt,prtvt7", "fsl,imx6dl";
> +
> + memory@10000000 {
> + device_type = "memory";
> + reg = <0x10000000 0x20000000>;
> + };
> +
> + backlight_lcd: backlight-lcd {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 500000>;
> + brightness-levels = <0 20 81 248 1000>;
> + default-brightness-level = <20>;
> + num-interpolated-steps = <21>;
> + power-supply = <®_12v_bl>;
> + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
> + };
> +
> + display {
> + compatible = "fsl,imx-parallel-display";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ipu1_disp>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interface-pix-fmt = "rgb24";
> + status = "okay";
> +
> + port@0 {
> + reg = <0>;
> +
> + display_in: endpoint {
> + remote-endpoint = <&ipu1_di0_disp0>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + display_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +
> + keys {
> + compatible = "gpio-keys";
> + autorepeat;
> +
> + esc {
> + label = "GPIO Key ESC";
> + linux,code = <KEY_ESC>;
> + gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + up {
> + label = "GPIO Key UP";
> + linux,code = <KEY_UP>;
> + gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + down {
> + label = "GPIO Key DOWN";
> + linux,code = <KEY_DOWN>;
> + gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + enter {
> + label = "GPIO Key Enter";
> + linux,code = <KEY_ENTER>;
> + gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + cycle {
> + label = "GPIO Key CYCLE";
> + linux,code = <KEY_CYCLEWINDOWS>;
> + gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + f1 {
> + label = "GPIO Key F1";
> + linux,code = <KEY_F1>;
> + gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
> + };
> +
> + f2 {
> + label = "GPIO Key F2";
> + linux,code = <KEY_F2>;
> + gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
> + };
> +
> + f3 {
> + label = "GPIO Key F3";
> + linux,code = <KEY_F3>;
> + gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
> + };
> +
> + f4 {
> + label = "GPIO Key F4";
> + linux,code = <KEY_F4>;
> + gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
> + };
> +
> + f5 {
> + label = "GPIO Key F5";
> + linux,code = <KEY_F5>;
> + gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
> + };
> +
> + f6 {
> + label = "GPIO Key F6";
> + linux,code = <KEY_F6>;
> + gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
> + };
> +
> + f7 {
> + label = "GPIO Key F7";
> + linux,code = <KEY_F7>;
> + gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + f8 {
> + label = "GPIO Key F8";
> + linux,code = <KEY_F8>;
> + gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
> + };
> +
> + f9 {
> + label = "GPIO Key F9";
> + linux,code = <KEY_F9>;
> + gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
> + };
> +
> + f10 {
> + label = "GPIO Key F10";
> + linux,code = <KEY_F10>;
> + gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + led-debug0 {
> + function = LED_FUNCTION_STATUS;
> + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + panel {
> + compatible = "innolux,g070y2t0ec";
> + backlight = <&backlight_lcd>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
> +
> + reg_12v_bl: regulator-bl-12v {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_12v_bl>;
> + regulator-name = "12v-bl";
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_1v8: regulator-1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "prti6q-sgtl5000";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Line", "Line In Jack",
> + "Headphone", "Headphone Jack",
> + "Speaker", "External Speaker";
> + simple-audio-card,routing =
> + "MIC_IN", "Microphone Jack",
> + "LINE_IN", "Line In Jack",
> + "Headphone Jack", "HP_OUT",
> + "External Speaker", "LINE_OUT";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&ssi1>;
> + system-clock-frequency = <0>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&sgtl5000>;
> + bitclock-master;
> + frame-master;
> + };
> + };
> +};
> +
> +&clks {
> + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
> + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
> +};
> +
> +&ecspi2 {
> + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> + status = "okay";
> +
> + tsc@0 {
> + compatible = "ti,tsc2046";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_tsc>;
> + spi-max-frequency = <100000>;
> + interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
> + pendown-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
> + vcc-supply = <®_3v3>;
> +
> + ti,vref-delay-usecs = /bits/ 16 <100>;
> +
> + ti,x-min = /bits/ 16 <0>;
> + ti,x-max = /bits/ 16 <8000>;
> + ti,y-min = /bits/ 16 <0>;
> + ti,y-max = /bits/ 16 <4800>;
> + ti,x-plate-ohms = /bits/ 16 <800>;
> + ti,y-plate-ohms = /bits/ 16 <300>;
> + ti,pressure-max = /bits/ 16 <4095>;
> +
> + ti,skip-samples = <2>;
> + ti,sample-period-msecs = <10>;
> + ti,report-period-msecs = <30>;
> +
> + ti,filter-tolerance = <80>;
> + ti,touch-resistance-threshold = <3500>;
> + };
> +};
> +
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> + status = "okay";
> +
> + mux_ssi1 {
> + fsl,audmux-port = <0>;
> + fsl,port-config = <
> + IMX_AUDMUX_V2_PTCR_SYN 0
> + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
> + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
> + IMX_AUDMUX_V2_PTCR_TFSDIR 0
> + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
> + >;
> + };
> +
> + mux_pins3 {
> + fsl,audmux-port = <2>;
> + fsl,port-config = <
> + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
> + 0 IMX_AUDMUX_V2_PDCR_TXRXEN
> + >;
> + };
> +};
> +
> +&can1 {
> + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
> +};
> +
> +&i2c1 {
> + sgtl5000: codec@a {
> + compatible = "fsl,sgtl5000";
> + reg = <0xa>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_codec>;
> + #sound-dai-cells = <0>;
> + clocks = <&clks 201>;
> + VDDA-supply = <®_3v3>;
> + VDDIO-supply = <®_3v3>;
> + VDDD-supply = <®_1v8>;
> + };
> +};
> +
> +&i2c3 {
> + rtc@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +
> + gpio_pca: gpio@74 {
> + compatible = "nxp,pca9539";
> + reg = <0x74>;
> + interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + };
> +};
> +
> +&ipu1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ipu1_csi0>;
> + status = "okay";
> +};
> +
> +&ipu1_di0_disp0 {
> + remote-endpoint = <&display_in>;
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&snvs_poweroff {
> + status = "okay";
> +};
> +
> +&snvs_pwrkey {
> + status = "okay";
> +};
> +
> +&ssi1 {
> + #sound-dai-cells = <0>;
> + fsl,mode = "i2s-slave";
> + status = "okay";
> +};
> +
> +&usbh1 {
> + status = "disabled";
> +};
> +
> +&vpu {
> + status = "disabled";
> +};
> +
> +&iomuxc {
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
> + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
> + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
> + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
> + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
> + >;
> + };
> +
> + pinctrl_can1phy: can1phy {
> + fsl,pins = <
> + /* CAN1_SR */
> + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
> + /* CAN1_TERM */
> + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
> + >;
> + };
> +
> + pinctrl_codec: codecgrp {
> + fsl,pins = <
> + /* AUDIO_nRESET */
> + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
> + >;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
> + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
> + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
> + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
> + >;
> + };
> +
> + pinctrl_ipu1_csi0: ipu1csi0grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
> + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
> + /* ITU656_nRESET */
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
> + /* ITU656_nPDN */
> + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
> + >;
> + };
> +
> + pinctrl_ipu1_disp: ipudisp1grp {
> + fsl,pins = <
> + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
> + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xb0
> +
> + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
> + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
> + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
> + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
> + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
> + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
> + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
> + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
> +
> + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
> + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
> + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
> + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
> + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
> + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
> + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
> + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
> +
> + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
> + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
> + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
> + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
> + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
> + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
> + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
> + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_reg_12v_bl: 12blgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
> + >;
> + };
> +
> + pinctrl_tsc: tscgrp {
> +
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
> + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6dl-victgo.dts b/arch/arm/dts/imx6dl-victgo.dts
> new file mode 100644
> index 0000000000..55bc4c8d41
> --- /dev/null
> +++ b/arch/arm/dts/imx6dl-victgo.dts
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2016 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6dl.dtsi>
> +#include "imx6qdl-vicut1.dtsi"
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + model = "Kverneland Tellus GO";
> + compatible = "kvg,victgo", "fsl,imx6dl";
> +
> + memory {
> + reg = <0x10000000 0x20000000>;
> + };
> +
> + rotary-encoder {
> + compatible = "rotary-encoder";
> + pinctrl-0 = <&pinctrl_rotary_ch>;
> + gpios = <&gpio2 3 0>, <&gpio2 4 0>;
> + linux,axis = <8>; /* REL_WHEEL */
> + rotary-encoder,steps-per-period = <4>;
> + rotary-encoder,relative-axis;
> + rotary-encoder,rollover;
> + wakeup-source;
> + };
> +
> + rotary-button {
> + compatible = "gpio-keys";
> + pinctrl-0 = <&pinctrl_rotary_btn>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + autorepeat;
> + button@0 {
> + label = "Rotary Key";
> + gpios = <&gpio2 05 1>;
> + linux,code = <KEY_ENTER>;
> + gpio-key,wakeup;
> + };
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rmii";
> + phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
> + clocks = <&clks IMX6QDL_CLK_ENET>,
> + <&clks IMX6QDL_CLK_ENET>;
> + clock-names = "ipg", "ahb";
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "disabled";
> +};
> +
> +&i2c1 {
> + ht16k33: ht16k33@70 {
> + compatible = "holtek,ht16k33";
> + pinctrl-0 = <&pinctrl_ht16k33>;
> + reg = <0x70>;
> + refresh-rate-hz = <20>;
> + debounce-delay-ms = <50>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
> + keypad,num-rows = <12>;
> + keypad,num-columns = <3>;
> + linux,keymap = <
> + MATRIX_KEY(2, 0, KEY_F6)
> + MATRIX_KEY(3, 0, KEY_F8)
> + MATRIX_KEY(4, 0, KEY_F10)
> + MATRIX_KEY(5, 0, KEY_F4)
> + MATRIX_KEY(6, 0, KEY_F2)
> + MATRIX_KEY(2, 1, KEY_F5)
> + MATRIX_KEY(3, 1, KEY_F7)
> + MATRIX_KEY(4, 1, KEY_F9)
> + MATRIX_KEY(5, 1, KEY_F3)
> + MATRIX_KEY(6, 1, KEY_F1)
> + >;
> + };
> +};
> +
> +&pwm2 {
> + status = "disabled";
> +};
> +
> +&iomuxc {
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP4 */
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
> + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
> + /* Phy reset */
> + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
> + /* nINTRP */
> + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
> + >;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
> + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
> + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
> + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
> + >;
> + };
> +
> + pinctrl_rotary_ch: rotarygrp {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 /* ROTARY_A */
> + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 /* ROTARY_B */
> + >;
> + };
> +
> + pinctrl_rotary_btn: rotarygrp {
> + fsl,pins = <
> + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 /* ROTARY_BTN */
> + >;
> + };
> +
> + pinctrl_ht16k33: ht16k33grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* IRQ */
> + >;
> + };
> +
> + pinctrl_tsc2046e: tsc2046egrp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0
> + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6dl-vicut1.dts b/arch/arm/dts/imx6dl-vicut1.dts
> new file mode 100644
> index 0000000000..725acbefc5
> --- /dev/null
> +++ b/arch/arm/dts/imx6dl-vicut1.dts
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6dl.dtsi>
> +#include "imx6qdl-vicut1.dtsi"
> +
> +/ {
> + model = "Kverneland UT1 Board";
> + compatible = "kvg,vicut1", "fsl,imx6dl";
> +
> + memory {
> + reg = <0x10000000 0x80000000>;
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rgmii";
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP_RGMII_MD(0x1b030, 0x10030) */
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
> +
> + /* Phy reset */
> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6q-prti6q.dts b/arch/arm/dts/imx6q-prti6q.dts
> new file mode 100644
> index 0000000000..f0469d5f62
> --- /dev/null
> +++ b/arch/arm/dts/imx6q-prti6q.dts
> @@ -0,0 +1,554 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6q.dtsi>
> +#include "imx6qdl-prti6q.dtsi"
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +
> +/ {
> + model = "Protonic PRTI6Q board";
> + compatible = "prt,prti6q", "fsl,imx6q";
> +
> + chosen {
> + environment {
> + compatible = "barebox,environment";
> + device-path = &ecspi1, "partname:env";
> + };
> + };
> +
> + memory@10000000 {
> + device_type = "memory";
> + reg = <0x10000000 0xf0000000>;
> + };
> +
> + backlight_lcd: backlight-lcd {
> + compatible = "pwm-backlight";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_backlight>;
> + pwms = <&pwm1 0 5000000>;
> + brightness-levels = <0 16 64 255>;
> + num-interpolated-steps = <16>;
> + default-brightness-level = <16>;
> + power-supply = <®_3v3>;
> + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
> + };
> +
> + can3_25m_osc: can3-25m-osc {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + led-debug0 {
> + function = LED_FUNCTION_STATUS;
> + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> +
> + led-debug1 {
> + function = LED_FUNCTION_SD;
> + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "disk-activity";
> + };
> + };
> +
> + panel {
> + compatible = "kyo,tcg121xglp";
> + backlight = <&backlight_lcd>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + };
> +
> + reg_wifi: regulator-wifi {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wifi_npd>;
> + enable-active-high;
> + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
> + regulator-max-microvolt = <1800000>;
> + regulator-min-microvolt = <1800000>;
> + regulator-name = "regulator-WL12xx";
> + startup-delay-us = <70000>;
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "prti6q-sgtl5000";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Line", "Line In Jack",
> + "Headphone", "Headphone Jack",
> + "Speaker", "External Speaker";
> + simple-audio-card,routing =
> + "MIC_IN", "Microphone Jack",
> + "LINE_IN", "Line In Jack",
> + "Headphone Jack", "HP_OUT",
> + "External Speaker", "LINE_OUT";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&ssi1>;
> + system-clock-frequency = <0>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&sgtl5000>;
> + bitclock-master;
> + frame-master;
> + };
> + };
> +
> + sound-spdif {
> + compatible = "fsl,imx-audio-spdif";
> + model = "imx-spdif";
> + spdif-controller = <&spdif>;
> + spdif-in;
> + spdif-out;
> + };
> +};
> +
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> + status = "okay";
> +
> + mux_ssi1 {
> + fsl,audmux-port = <0>;
> + fsl,port-config = <
> + IMX_AUDMUX_V2_PTCR_SYN 0
> + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
> + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
> + IMX_AUDMUX_V2_PTCR_TFSDIR 0
> + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
> + >;
> + };
> +
> + mux_pins3 {
> + fsl,audmux-port = <2>;
> + fsl,port-config = <
> + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
> + 0 IMX_AUDMUX_V2_PDCR_TXRXEN
> + >;
> + };
> +};
> +
> +&can2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can2>;
> + status = "okay";
> +};
> +
> +&ecspi1 {
> + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "boot";
> + reg = <0x0 0x100000>;
> + };
> +
> + partition@100000 {
> + label = "env";
> + reg = <0x100000 0x10000>;
> + };
> +
> + partition@110000 {
> + label = "spare";
> + reg = <0x110000 0x2f0000>;
> + };
> + };
> +};
> +
> +&ecspi2 {
> + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> + status = "okay";
> +
> + can@0 {
> + compatible = "microchip,mcp2515";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can3>;
> + clocks = <&can3_25m_osc>;
> + interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
> + spi-max-frequency = <5000000>;
> + };
> +
> + adc@1 {
> + compatible = "ti,adc128s052";
> + reg = <1>;
> + spi-max-frequency = <2000000>;
> + vref-supply = <®_3v3>;
> + };
> +};
> +
> +&ecspi3 {
> + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi3>;
> + status = "okay";
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rgmii-id";
> + phy-handle = <&rgmii_phy>;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Microchip KSZ9031RNX PHY */
> + rgmii_phy: ethernet-phy@0 {
> + reg = <0>;
> + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
> + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <10000>;
> + reset-deassert-us = <300>;
> + };
> + };
> +};
> +
> +&hdmi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hdmi>;
> + ddc-i2c-bus = <&i2c2>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + sgtl5000: audio-codec@a {
> + compatible = "fsl,sgtl5000";
> + reg = <0xa>;
> + #sound-dai-cells = <0>;
> + clocks = <&clks 201>;
> + VDDA-supply = <®_3v3>;
> + VDDIO-supply = <®_3v3>;
> + VDDD-supply = <®_1v8>;
> + };
> +};
> +
> +/* DDC */
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + adc@49 {
> + compatible = "ti,ads1015";
> + reg = <0x49>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* can2_l */
> + channel@4 {
> + reg = <4>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> +
> + /* can2_h */
> + channel@5 {
> + reg = <5>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> +
> + /* can1_l */
> + channel@6 {
> + reg = <6>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> +
> + /* can1_h */
> + channel@7 {
> + reg = <7>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> + };
> +};
> +
> +&pcie {
> + status = "okay";
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&ldb {
> + status = "okay";
> +
> + lvds-channel@0 {
> + status = "okay";
> +
> + port@4 {
> + reg = <4>;
> +
> + lvds0_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> +&sata {
> + status = "okay";
> +};
> +
> +&snvs_poweroff {
> + status = "okay";
> +};
> +
> +&spdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spdif>;
> + status = "okay";
> +};
> +
> +&ssi1 {
> + #sound-dai-cells = <0>;
> + fsl,mode = "ac97-slave";
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +&uart5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart5>;
> + status = "okay";
> +};
> +
> +&usbotg {
> + pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + non-removable;
> + vmmc-supply = <®_wifi>;
> + cap-power-off-card;
> + keep-power-in-suspend;
> + status = "okay";
> +
> + wifi {
> + compatible = "ti,wl1271";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wifi>;
> + interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
> + ref-clock-frequency = "38400000";
> + tcxo-clock-frequency = "19200000";
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
> + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
> + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
> + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
> + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
> + >;
> + };
> +
> + pinctrl_backlight: backlightgrp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
> + >;
> + };
> +
> + pinctrl_can2: can2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
> + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
> + >;
> + };
> +
> + pinctrl_can3: can3grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1
> + >;
> + };
> +
> + pinctrl_ecspi1: ecspi1grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
> + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
> + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
> + /* CS */
> + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
> + >;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
> + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
> + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
> + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
> + >;
> + };
> +
> + pinctrl_ecspi2_cs: ecspi2csgrp {
> + fsl,pins = <
> + /* ADC128S022 CS */
> + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1
> + >;
> + };
> +
> + pinctrl_ecspi3: ecspi3grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
> + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
> + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
> + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
> +
> + /* Phy reset */
> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
> + >;
> + };
> +
> + pinctrl_hdmi: hdmigrp {
> + fsl,pins = <
> + /* NOTE: DDC is done via I2C2, so DON'T
> + * configure DDC pins for HDMI!
> + */
> + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
> + >;
> + };
> +
> + /* DDC */
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
> + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_spdif: spdifgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
> + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
> + MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart5: uart5grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usbotg_id: usbotgidgrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f058
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
> + >;
> + };
> +
> + pinctrl_wifi: wifigrp {
> + fsl,pins = <
> + /* WL12xx IRQ */
> + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880
> + >;
> + };
> +
> + pinctrl_wifi_npd: wifinpd {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6q-prtwd2.dts b/arch/arm/dts/imx6q-prtwd2.dts
> new file mode 100644
> index 0000000000..8572917865
> --- /dev/null
> +++ b/arch/arm/dts/imx6q-prtwd2.dts
> @@ -0,0 +1,188 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2018 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6q.dtsi>
> +#include "imx6qdl-prti6q.dtsi"
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + model = "Protonic WD2 board";
> + compatible = "prt,prtwd2", "fsl,imx6q";
> +
> + memory@10000000 {
> + device_type = "memory";
> + reg = <0x10000000 0x20000000>;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wifi_npd>;
> + reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
> + };
> +
> + /* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
> + i2c@4 {
> + compatible = "i2c-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c4>;
> + sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> + scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
> + i2c-gpio,delay-us = <20>; /* ~10 kHz */
> + i2c-gpio,scl-output-only;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +};
> +
> +&can1 {
> + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rmii";
> + clocks = <&clks IMX6QDL_CLK_ENET>,
> + <&clks IMX6QDL_CLK_ENET>;
> + clock-names = "ipg", "ahb";
> + status = "okay";
> +
> + fixed-link {
> + speed = <100>;
> + pause;
> + full-duplex;
> + };
> +};
> +
> +&i2c3 {
> + adc@49 {
> + compatible = "ti,ads1015";
> + reg = <0x49>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* V in */
> + channel@4 {
> + reg = <4>;
> + ti,gain = <1>;
> + ti,datarate = <3>;
> + };
> +
> + /* I charge */
> + channel@5 {
> + reg = <5>;
> + ti,gain = <1>;
> + ti,datarate = <3>;
> + };
> +
> + /* V bus */
> + channel@6 {
> + reg = <6>;
> + ti,gain = <1>;
> + ti,datarate = <3>;
> + };
> +
> + /* nc */
> + channel@7 {
> + reg = <7>;
> + ti,gain = <1>;
> + ti,datarate = <3>;
> + };
> + };
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + non-removable;
> + no-1-8-v;
> + non-removable;
> + mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
> + pm-ignore-notify;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + wifi@1 {
> + compatible = "brcm,bcm4329-fmac";
> + reg = <1>;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb_eth_chg>;
> +
> + pinctrl_can1phy: can1phy {
> + fsl,pins = <
> + /* CAN1_SR */
> + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP4 */
> + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x130b0
> + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
> + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
> + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
> + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
> +
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
> + /* Phy reset */
> + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
> + /* nINTRP */
> + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
> +
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
> + >;
> + };
> +
> + pinctrl_i2c4: i2c4grp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1f8b0
> + MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1f8b0
> + >;
> + };
> +
> + pinctrl_usb_eth_chg: usbethchggrp {
> + fsl,pins = <
> + /* USB charging control */
> + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x130b0
> + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x130b0
> + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x130b0
> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x130b0
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
> + >;
> + };
> +
> + pinctrl_wifi_npd: wifinpd {
> + fsl,pins = <
> + /* WL_REG_ON */
> + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6q-vicut1.dts b/arch/arm/dts/imx6q-vicut1.dts
> new file mode 100644
> index 0000000000..9f60ed1ac2
> --- /dev/null
> +++ b/arch/arm/dts/imx6q-vicut1.dts
> @@ -0,0 +1,52 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6q.dtsi>
> +#include "imx6qdl-vicut1.dtsi"
> +
> +/ {
> + model = "Kverneland UT1Q Board";
> + compatible = "kvg,vicut1q", "fsl,imx6q";
> +
> + memory {
> + reg = <0x10000000 0xf0000000>;
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rgmii";
> + /* phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; */
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP_RGMII_MD(0x1b030, 0x10030) */
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
> +
> + /* Phy reset */
> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6qdl-prti6q.dtsi b/arch/arm/dts/imx6qdl-prti6q.dtsi
> new file mode 100644
> index 0000000000..ed526d185f
> --- /dev/null
> +++ b/arch/arm/dts/imx6qdl-prti6q.dtsi
> @@ -0,0 +1,174 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + chosen {
> + stdout-path = &uart4;
> + };
> +
> + reg_1v8: regulator-1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + reg_3v3: regulator-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + reg_usb_h1_vbus: regulator-h1-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "h1-vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + reg_usb_otg_vbus: regulator-otg-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "otg-vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +};
> +
> +&can1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can1>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + temperature-sensor@70 {
> + compatible = "ti,tmp103";
> + reg = <0x70>;
> + };
> +};
> +
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> +&usbh1 {
> + vbus-supply = <®_usb_h1_vbus>;
> + phy_type = "utmi";
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usbotg {
> + vbus-supply = <®_usb_otg_vbus>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + phy_type = "utmi";
> + dr_mode = "host";
> + disable-over-current;
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_can1: can1grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
> + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
> + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
> + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
> + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
> + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
> + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
> + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
> + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
> + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
> + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
> + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
> + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
> + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
> + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6qdl-vicut1.dtsi b/arch/arm/dts/imx6qdl-vicut1.dtsi
> new file mode 100644
> index 0000000000..dc18614f89
> --- /dev/null
> +++ b/arch/arm/dts/imx6qdl-vicut1.dtsi
> @@ -0,0 +1,208 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +#include "imx6qdl-prti6q.dtsi"
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + gpio_key_pwr: gpio_keys {
> + compatible = "gpio-keys";
> + autorepeat;
> +
> + power {
> + label = "GPIO Key Power";
> + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + debug0 {
> + label = "debug0";
> + gpios = <&gpio1 8 0>;
> + linux,default-trigger = "heartbeat";
> + };
> +
> + debug1 {
> + label = "debug1";
> + gpios = <&gpio1 9 0>;
> + linux,default-trigger = "mmc";
> + };
> +
> + power_led {
> + label = "power_led";
> + gpios = <&gpio2 24 0>;
> + default-state = "on";
> + };
> +
> + isb_led {
> + label = "isb_led";
> + gpios = <&gpio4 31 0>;
> + default-state = "off";
> + };
> + };
> +};
> +
> +&clks {
> + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
> + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + rtc: pcf8563@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* SGTL5000 sys_mclk */
> + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
> + /* CAN1_SR + CAN2_SR GPIO outputs */
> + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
> + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13070
> + /* CAN1_TERM */
> + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
> + /* ITU656_nRESET */
> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
> + /* CAM1_MIRROR */
> + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0
> + /* CAM2_MIRROR */
> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
> + /* CAM_nDETECT */
> + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
> + /* nON_SWITCH */
> + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
> + /* ISB_IN1 */
> + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
> + /* ISB_nIN2 */
> + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
> + /* WARN_LIGHT */
> + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0
> + /* ON2_FB */
> + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0
> + /* YACO_nIRQ */
> + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
> + /* YACO_BOOT0 */
> + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0
> + /* YACO_nRESET */
> + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
> + /* FORCE_ON1 */
> + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
> + /* AUDIO_nRESET */
> + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
> + /* ITU656_nPDN */
> + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
> +
> + /* HW revision detect */
> + /* REV_ID0 */
> + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
> + /* REV_ID1 = PWM output LED_PWM (SION) */
> + /* defined in &pinctrl_pwm3 */
> + /* REV_ID2 */
> + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
> + /* REV_ID3 */
> + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
> + /* REV_ID4 */
> + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
> +
> + /* New in HW revision 1 */
> + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 /* ON1_FB */
> + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 /* DIP1_FB */
> +
> + /* New in UTC (UT1 HW revision 1) and TGO */
> + /* WHEEL */
> + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x100b0
> + /* RADAR */
> + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x100b0
> + /* PTO */
> + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x100b0
> + /* CPU_ON1_CTRL */
> + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0
> + /* CPU_ON2_CTRL */
> + MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x1b0b0
> + /* CPU_HITCH_IN_OUT */
> + MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x100b0
> + /* CPU_LIGHT_ON */
> + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b0
> + /* CPU_CONTACT_IN */
> + MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x100b0
> + >;
> + };
> +
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
> + /* power enable, high active */
> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
> + >;
> + };
> +
> + /* YaCO AUX Uart */
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + /* YaCO Touchscreen UART */
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + /* DEBUG0A */
> + MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
> + /* DEBUG1A */
> + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
> + /* DEBUG0 */
> + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
> + /* DEBUG1 */
> + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
> + /* POWER_LED */
> + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
> + /* ISB_LED */
> + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0
> + >;
> + };
> +
> + pinctrl_pwm2: pwm2grp {
> + fsl,pins = <
> + /* ISB LED (not in TGO or UTC version 1+) */
> + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_pwm3: pwm3grp {
> + fsl,pins = <
> + /* REV_ID1 = PWM output LED_PWM (SION for ID) */
> + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x4001b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6qp-prtwd3.dts b/arch/arm/dts/imx6qp-prtwd3.dts
> new file mode 100644
> index 0000000000..0ef0bae036
> --- /dev/null
> +++ b/arch/arm/dts/imx6qp-prtwd3.dts
> @@ -0,0 +1,675 @@
> +/*
> + * Copyright (c) 2018 Protonic Holland
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6qp.dtsi>
> +#include "imx6qdl-prti6q.dtsi"
> +
> +/ {
> + model = "Protonic WD3 board";
> + compatible = "prt,prtwd3", "fsl,imx6qp";
> +
> + memory@10000000 {
> + device_type = "memory";
> + reg = <0x10000000 0x20000000>;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + aliases {
> + mdio-gpio0 = &mdio0;
> + };
> +
> + usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wifi_npd>;
> + reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
> + };
> +
> + clk20m_can: fdcan_clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <20000000>;
> + };
> +
> + clk25m_switch: switch_clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + clk25m_phy3: phy3_clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + clk50m_phy: phy_clock {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <50000000>;
> + };
> +
> + mdio0: mdio {
> + compatible = "virtual,mdio-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mdio0>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpios = <&gpio5 6 GPIO_ACTIVE_HIGH
> + &gpio5 7 GPIO_ACTIVE_HIGH>;
> + };
> +
> + display_panel0 {
> + compatible = "kyo,tcg121xglp";
> + backlight = <&backlight_lcd>;
> +
> + port {
> + display_panel0_in: endpoint {
> + remote-endpoint = <&serializer0_out>;
> + };
> + };
> + };
> +
> + display_panel1 {
> + compatible = "kyo,tcg121xglp";
> + backlight = <&backlight_panel1>;
> +
> + port {
> + display_panel1_in: endpoint {
> + remote-endpoint = <&serializer1_out>;
> + };
> + };
> + };
> +
> + backlight_lcd: backlight_lcd {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 5000000>;
> + brightness-levels = <0 1 2 4 6 8 12 16 24 32 48 64 96 128 192 255>;
> + default-brightness-level = <15>;
> + power-supply = <®_3v3>;
> + };
> +
> + backlight_panel1: backlight_panel1 {
> + compatible = "pwm-backlight";
> + pwms = <&pwm2 0 5000000>;
> + brightness-levels = <0 1 2 4 6 8 12 16 24 32 48 64 96 128 192 255>;
> + default-brightness-level = <0>;
> + power-supply = <®_3v3>;
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + status = "okay";
> +
> + clocks = <&clks IMX6QDL_CLK_ENET>,
> + <&clks IMX6QDL_CLK_ENET>,
> + <&clks IMX6QDL_CLK_ENET_REF>,
> + <&clks IMX6QDL_CLK_ENET_REF>;
> + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
> + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>;
> + assigned-clock-rates = <125000000>;
> +
> + phy-mode = "rgmii";
> + fixed-link {
> + speed = <100>;
> + full-duplex;
> + };
> +
> + mdio1: mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + /* Microchip KSZ9031 */
> + rgmii_phy: ethernet-phy@2 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <2>;
> +
> + interrupts-extended = <&gpio1 28 IRQ_TYPE_EDGE_FALLING>;
> +
> + /* FIXME: tx/rx clk skew are currently set by imx
> + * platform driver. Write own walues here to not depend
> + * fixup of horror.
> + */
> +
> + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> + /* reset assert time is provided by documentation */
> + reset-assert-us = <10000>;
> + /* documented reset deassert time (100us) is not enough
> + * use test value of 300us.
> + */
> + reset-deassert-us = <1000>;
> +
> + clocks = <&clk25m_phy3>;
> + };
> + };
> +};
> +
> +&ecspi2 {
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> + status = "okay";
> + sja1105_switch: sja1105@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "nxp,sja1105q";
> + spi-max-frequency = <4000000>;
> + spi-cpha;
> + spi-rx-delay-us = <1>;
> + spi-tx-delay-us = <1>;
> +
> + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
> +
> + clocks = <&clk25m_switch>;
> + #clock-cells = <1>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + label = "usb";
> + phy-handle = <&usbeth_phy>;
> + phy-mode = "rmii";
> + };
> +
> + port@1 {
> + reg = <1>;
> + label = "t1slave";
> + phy-handle = <&tja1102_phy1>;
> + phy-mode = "rmii";
> + };
> +
> + port@2 {
> + reg = <2>;
> + label = "t1master";
> + phy-handle = <&tja1102_phy0>;
> + phy-mode = "rmii";
> +
> + };
> +
> + port@3 {
> + reg = <3>;
> + label = "rj45";
> + phy-handle = <&rgmii_phy>;
> + phy-mode = "rgmii-id";
> + };
> +
> + port@4 {
> + reg = <4>;
> + label = "cpu";
> + ethernet = <&fec>;
> + phy-mode = "rgmii-id";
> +
> + fixed-link {
> + speed = <100>;
> + full-duplex;
> + };
> + };
> + };
> + };
> +};
> +
> +&mdio0 {
> + usbeth_phy: ethernet-phy@3 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x3>;
> +
> + interrupts-extended = <&gpio5 12 IRQ_TYPE_LEVEL_LOW>;
> + micrel,led-mode = <0>;
> +
> + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <500>;
> + reset-deassert-us = <1000>;
> +
> + /* FIXME: the clock is provided by switch and we should know
> + * and we should request it only after switch have done clock
> + * configuration. Since it is currently not implemented,
> + * use fixed clock.
> + * WARNING: Using fixed clocks in this case is potential source
> + * for evil bugs. Switch may reconfigure, stop or change clk
> + * freq without letting PHY to know about it.
> + */
> + clocks = <&clk50m_phy>;
> + clock-names = "rmii-ref";
> + };
> +
> + tja1102_phy0: ethernet-phy@4 {
> + compatible = "ethernet-phy-id0180.dc80";
> + reg = <0x4>;
> +
> + interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
> +
> + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
> + /* reset detection time is 20 usec. */
> + reset-assert-us = <20>;
> + /* reset to standby 2 msec. */
> + reset-deassert-us = <2000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tja1102_phy1: ethernet-phy@5 {
> + reg = <0x5>;
> +
> + interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
> + };
> + };
> +};
> +
> +&ecspi3 {
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi3>;
> + status = "okay";
> + can3: can@0 {
> + compatible = "microchip,mcp2518fd";
> + spi-max-frequency = <5000000>;
> + reg = <0>;
> + clocks = <&clk20m_can>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <25 0x2>;
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + serializer0: ds90ub927@c {
> + compatible = "ti,ds90ub927";
> + reg = <0x0c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + serializer0_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + /* port@1 {
> + reg = <1>;
> + serializer0_audio_in: endpoint {
> + remote-endpoint = <&audio_i2s0_out>;
> + };
> + }; */
> + port@2 {
> + reg = <2>;
> + serializer0_out: endpoint {
> + remote-endpoint = <&display_panel0_in>;
> + };
> + };
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + serializer1: ds90ub927@c {
> + compatible = "ti,ds90ub927";
> + reg = <0x0c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + serializer1_in: endpoint {
> + remote-endpoint = <&lvds1_out>;
> + };
> + };
> + port@2 {
> + reg = <2>;
> + serializer1_out: endpoint {
> + remote-endpoint = <&display_panel1_in>;
> + };
> + };
> + };
> +
> + camdeser: ds90ub954@30 {
> + compatible = "ti,ds90ub954";
> + reg = <0x30>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + camdeser_fpd_link_in: endpoint {
> + };
> + };
> + port@1 {
> + reg = <1>;
> + camdeser_mipi_out: endpoint {
> + remote-endpoint = <&mipi_csi_in>;
> + };
> + };
> + };
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + no-1-8-v; /* force 3.3V VIO */
> + non-removable;
> + mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
> + pm-ignore-notify;
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + brcmf: bcrmf@1 {
> + reg = <1>;
> + compatible = "brcm,bcm4329-fmac";
> + };
> +};
> +
> +&i2c3 {
> + adc@49 {
> + compatible = "ti,ads1015";
> + reg = <0x49>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@4 {
> + reg = <4>;
> + ti,gain = <1>;
> + ti,datarate = <3>;
> + };
> +
> + channel@5 {
> + reg = <5>;
> + ti,gain = <1>;
> + ti,datarate = <3>;
> + };
> +
> + channel@6 {
> + reg = <6>;
> + ti,gain = <1>;
> + ti,datarate = <3>;
> + };
> +
> + channel@7 {
> + reg = <7>;
> + ti,gain = <1>;
> + ti,datarate = <3>;
> + };
> + };
> +};
> +
> +&ldb {
> + status = "okay";
> +
> + lvds-channel@0 {
> + status = "okay";
> +
> + port@4 {
> + reg = <4>;
> +
> + lvds0_out: endpoint {
> + remote-endpoint = <&serializer0_in>;
> + };
> + };
> + };
> +
> + lvds-channel@1 {
> + status = "okay";
> +
> + port@4 {
> + reg = <4>;
> +
> + lvds1_out: endpoint {
> + remote-endpoint = <&serializer1_in>;
> + };
> + };
> + };
> +};
> +
> +&mipi_csi {
> + status = "okay";
> + port@0 {
> + reg = <0>;
> +
> + mipi_csi_in: endpoint {
> + remote-endpoint = <&camdeser_mipi_out>;
> + };
> + };
> +};
> +
> +&ipu1_csi0_mux_from_parallel_sensor {
> + /* Empty, to disable parallel camera from PRTI6Q */
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&pwm2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm2>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
> +
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
> +
> + /* Configure clock provider for RGMII ref clock */
> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0
> + /* Configure clock consumer for RGMII ref clock */
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
> +
> + /* SJA1105Q switch reset */
> + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x10030
> +
> + /* phy3/rgmii_phy reset */
> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x10030
> + /* phy3/rgmii_phy int */
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x40010000
> + >;
> + };
> +
> + pinctrl_mdio0: mdio0grp {
> + fsl,pins = <
> + /* phy0/usbeth_phy reset */
> + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x10030
> + /* phy0/usbeth_phy int */
> + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
> +
> + /* phy12/tja1102_phy0 reset */
> + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x10030
> + /* phy12/tja1102_phy0 int */
> + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x100b1
> + /* phy12/tja1102_phy0 enable. Set 100K pull-up */
> + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1f030
> + >;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
> + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
> + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
> + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
> + >;
> + };
> +
> +
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* SGTL5000 sys_mclk */
> + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
> + /* CAN1_SR + CAN2_SR GPIO outputs */
> + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
> + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13070
> + /* CAN1_TERM (not used on WD3) */
> + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
> +
> + /* HW revision detect */
> + /* REV_ID0 */
> + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
> + /* REV_ID1 */
> + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
> + /* REV_ID2 */
> + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
> + /* REV_ID3 */
> + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
> + /* REV_ID4 */
> + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
> +
> + /* USB charging control */
> + /* CHG Control */
> + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x130b0
> + /* RID0 */
> + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x130b0
> + /* RID1 */
> + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x130b0
> + /* RID2 */
> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x130b0
> +
> + /* Power VSEL and TG */
> + /* VSEL */
> + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0
> + /* TG */
> + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
> +
> + /* Display panel 0 GPIO */
> + /* L/R */
> + MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b0
> + /* TS_nINT */
> + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0
> + /* EN */
> + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
> + /* LVDS0_nINT */
> + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x1b0b0
> + /* LVDS0_PD */
> + MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x1b0b0
> +
> + /* Display panel 1 GPIO */
> + /* L/R */
> + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
> + /* TS_nINT */
> + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
> + /* EN */
> + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0
> + /* LVDS1_nINT */
> + MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x1b0b0
> + /* LVDS1_PD */
> + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0
> +
> + /* Camera */
> + /* CAM_GPIO0 */
> + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
> + /* CAM_nINT */
> + MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x1b0b0
> + /* CAM_GPIO1 */
> + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
> + /* CAM_nPD */
> + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x1b0b0
> + /* CAM_LOCK */
> + MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x1b0b0
> +
> + /* USB ethernet reset (asix) */
> + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
> + >;
> + };
> +
> + pinctrl_wifi_npd: wifinpd {
> + fsl,pins = <
> + /* WL_REG_ON */
> + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
> + >;
> + };
> +
> + pinctrl_audmux: audmuxgrp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
> + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
> + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001f8b1
> + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001f8b1
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + /* No leds */
> + fsl,pins = <>;
> + };
> +
> + pinctrl_ecspi3: ecspi3grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
> + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
> + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
> + /* CS */
> + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1
> + /* CAN2_nINT */
> + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1
> + >;
> + };
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
> + >;
> + };
> +
> + pinctrl_pwm2: pwm2grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b0
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6qp-vicutp.dts b/arch/arm/dts/imx6qp-vicutp.dts
> new file mode 100644
> index 0000000000..44cfe68867
> --- /dev/null
> +++ b/arch/arm/dts/imx6qp-vicutp.dts
> @@ -0,0 +1,52 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include <arm/imx6qp.dtsi>
> +#include "imx6qdl-vicut1.dtsi"
> +
> +/ {
> + model = "Kverneland UT1P Board";
> + compatible = "kvg,vicutp", "fsl,imx6qp";
> +
> + memory {
> + reg = <0x10000000 0x80000000>;
> + };
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rgmii";
> + /* phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; */
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + /* MX6QDL_ENET_PINGRP_RGMII_MD(0x1b030, 0x10030) */
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
> +
> + /* Phy reset */
> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx6ul-prti6g.dts b/arch/arm/dts/imx6ul-prti6g.dts
> new file mode 100644
> index 0000000000..e65198bab2
> --- /dev/null
> +++ b/arch/arm/dts/imx6ul-prti6g.dts
> @@ -0,0 +1,81 @@
> +/*
> + * Copyright (C) 2016 Protonic Holland
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6ul-prti6g.dtsi"
> +
> +/ {
> + model = "Protonic PRTI6G Board";
> + compatible = "prt,prti6g", "fsl,imx6ul";
> +};
> +
> +&pinctrl_hog {
> + fsl,pins = <
> + /* HW revision detect */
> + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
> + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
> + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
> + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
> + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 /* BOARD_ID0 */
> + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 /* BOARD_ID1 */
> + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* BOARD_ID2 */
> + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 /* BOARD_ID3 */
> +
> + /* Safety controller IO */
> + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* WAKE_SC */
> + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* PROGRAM_SC */
> + >;
> +};
> +
> +&ecspi2 {
> + status = "okay";
> +};
> +
> +&can2 {
> + status = "okay";
> +};
> +
> +&i2c2 {
> + can_adc: ads1015@49 {
> + compatible = "ti,ads1015";
> + reg = <0x49>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@4 {
> + reg = <4>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> +
> + channel@5 {
> + reg = <5>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> +
> + channel@6 {
> + reg = <6>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> +
> + channel@7 {
> + reg = <7>;
> + ti,gain = <3>;
> + ti,datarate = <3>;
> + };
> + };
> +};
> diff --git a/arch/arm/dts/imx6ul-prti6g.dtsi b/arch/arm/dts/imx6ul-prti6g.dtsi
> new file mode 100644
> index 0000000000..c20bbd5bc2
> --- /dev/null
> +++ b/arch/arm/dts/imx6ul-prti6g.dtsi
> @@ -0,0 +1,330 @@
> +/*
> + * Copyright (C) 2016 Protonic Holland
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <arm/imx6ul.dtsi>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + chosen {
> + stdout-path = &uart1;
> + environment@0 {
> + compatible = "barebox,environment";
> + device-path = &flash, "partname:env";
> + };
> + };
> +
> + memory {
> + reg = <0x80000000 0x10000000>;
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg_3p2v: 3p2-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "regulator-3P2V";
> + regulator-min-microvolt = <3200000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-always-on;
> + };
> +
> + reg_1p35v: 1p35-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "regulator-1P35V";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> + };
> +
> + leds: leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + debug {
> + label = "debug0";
> + gpios = <&gpio4 16 0>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&usbotg1 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
> + vmmc-supply = <®_3p2v>;
> + wakeup-source;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&ecspi1 {
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi1>;
> + status = "okay";
> +
> + flash: w25q64fv@0 {
> + compatible = "winbond,w25q64", "jedec,spi-nor";
> + spi-max-frequency = <20000000>;
> + m25p,fast-read;
> + reg = <0>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "boot";
> + reg = <0x0 0x60000>; /* 384 Kb */
> + };
> +
> + partition@60000 {
> + label = "env";
> + reg = <0x60000 0x10000>; /* 64 Kb */
> + };
> +
> + partition@70000 {
> + label = "dtb";
> + reg = <0x70000 0x10000>; /* 64 Kb */
> + };
> +
> + partition@80000 {
> + label = "kernel";
> + reg = <0x80000 0x780000>; /* 7680 Kb */
> + };
> + };
> +};
> +
> +&ecspi2 {
> + fsl,spi-num-chipselects = <1>;
> + cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi2>;
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + clock-frequency = <100000>;
> + status = "okay";
> +
> + /* RFID chip */
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + clock-frequency = <100000>;
> + status = "okay";
> +
> + rtc: pcf8563@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +
> + tmp103: tmp103@70 {
> + compatible = "ti,tmp103", "tmp103";
> + reg = <0x70>;
> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1 &pinctrl_ethphy0_rst>;
> + phy-mode = "rmii";
> + phy-handle = <ðphy0>;
> + phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> + phy-reset-duration = <11>;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@0 {
> + reg = <0>;
> + };
> + };
> +};
> +
> +
> +&can1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan1>;
> + status = "okay";
> +};
> +
> +&can2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexcan2>;
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + prti6g {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* HW revision detect */
> + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
> + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
> + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
> + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
> + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 /* BOARD_ID0 */
> + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 /* BOARD_ID1 */
> + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* BOARD_ID2 */
> + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 /* BOARD_ID3 */
> +
> + /* CAN diagnostics (nSMBALERT) */
> + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
> + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1
> + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099
> + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1
> + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1
> + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1
> + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1
> + MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x170b0 /* SD1 CD */
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
> + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
> + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
> + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
> + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
> + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
> + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
> + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
> + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
> + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
> + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0
> + >;
> + };
> +
> + pinctrl_ecspi1: ecspi1grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x0b0b0
> + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x000b1
> + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x0b0b0
> + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0b0b0
> + >;
> + };
> +
> + pinctrl_ecspi2: ecspi2grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x0b0b0
> + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x000b1
> + MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x0b0b0
> + MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x0b0b0
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0
> + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x4001b8b0
> + MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x4001b8b0
> + >;
> + };
> +
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
> + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x100b0
> + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
> + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
> + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0
> + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
> + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
> + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
> + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
> + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
> + >;
> + };
> +
> + pinctrl_ethphy0_rst: ethphy-rstgrp-0 {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x00880 /* PHY RESET */
> + >;
> + };
> +
> + pinctrl_flexcan1: flexcan1grp {
> + fsl,pins = <
> + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
> + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
> + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 /* SR */
> + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 /* TERM */
> + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 /* nSMBALERT */
> + >;
> + };
> +
> + pinctrl_flexcan2: flexcan2grp {
> + fsl,pins = <
> + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
> + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
> + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 /* SR */
> + >;
> + };
> + };
> +};
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 6dd5cb2aca..4a0f0b717f 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -336,6 +336,12 @@ config MACH_PHYTEC_SOM_IMX6
> select ARCH_IMX6
> select ARCH_IMX6UL
>
> +config MACH_PROTONIC_IMX6
> + bool "Protonic-Holland i.MX6 based boards"
> + select ARCH_IMX6
> + select ARCH_IMX6UL
> + select ARM_USE_COMPRESSED_DTB
> +
> config MACH_KONTRON_SAMX6I
> bool "Kontron sAMX6i"
> select ARCH_IMX6
> diff --git a/images/Makefile.imx b/images/Makefile.imx
> index 765702f26d..d8879e314f 100644
> --- a/images/Makefile.imx
> +++ b/images/Makefile.imx
> @@ -299,6 +299,34 @@ $(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx
>
> $(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx6dl_som_lc_emmc_1gib, phytec-som-imx6/flash-header-phytec-pcm058dl-1gib, phytec-phycore-imx6dl-som-lc-emmc-1gib)
>
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6q_prti6q, protonic-imx6/flash-header-prti6q, protonic-prti6q)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6q_prtwd2, protonic-imx6/flash-header-prtwd2, protonic-prtwd2)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6q_vicut1, protonic-imx6/flash-header-vicut1q, protonic-vicut1q)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_alti6p, protonic-imx6/flash-header-alti6p, protonic-alti6p)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_lanmcu, protonic-imx6/flash-header-lanmcu, protonic-lanmcu)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_plybas, protonic-imx6/flash-header-plybas, protonic-plybas)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_plym2m, protonic-imx6/flash-header-plym2m, protonic-plym2m)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_prtmvt, protonic-imx6/flash-header-prtmvt, protonic-prtmvt)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_prtrvt, protonic-imx6/flash-header-prtrvt, protonic-prtrvt)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_prtvt7, protonic-imx6/flash-header-prtvt7, protonic-prtvt7)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_victgo, protonic-imx6/flash-header-victgo, protonic-victgo)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_vicut1, protonic-imx6/flash-header-vicut1, protonic-vicut1)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6qp_prtwd3, protonic-imx6/flash-header-prtwd3, protonic-prtwd3)
> +
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6qp_vicutp, protonic-imx6/flash-header-vicutp, protonic-vicutp)
> +
> $(call build_imx_habv4img, CONFIG_MACH_KONTRON_SAMX6I, start_imx6q_samx6i, kontron-samx6i/flash-header-samx6i-quad, imx6q-samx6i)
>
> $(call build_imx_habv4img, CONFIG_MACH_KONTRON_SAMX6I, start_imx6dl_samx6i, kontron-samx6i/flash-header-samx6i-duallite, imx6dl-samx6i)
> @@ -326,6 +354,8 @@ $(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx
>
> $(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx6ull_som_emmc_512mb, phytec-som-imx6/flash-header-phytec-pcl063-512mb, phytec-phycore-imx6ull-emmc-512mb)
>
> +$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6ul_prti6g, protonic-imx6/flash-header-prti6g, protonic-prti6g)
> +
> $(call build_imx_habv4img, CONFIG_MACH_TECHNEXION_PICO_HOBBIT, start_imx6ul_pico_hobbit_256mb, technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-256, imx6ul-pico-hobbit-256mb)
>
> $(call build_imx_habv4img, CONFIG_MACH_TECHNEXION_PICO_HOBBIT, start_imx6ul_pico_hobbit_512mb, technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-512, imx6ul-pico-hobbit-512mb)
> --
> 2.27.0
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 149 bytes --]
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-06-11 10:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-11 9:55 Oleksij Rempel
2020-06-11 10:00 ` Oleksij Rempel [this message]
2020-06-11 11:52 ` Ahmad Fatoum
2020-06-11 12:10 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200611100028.xlqglxyijzf6rtwc@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=david@protonic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox