From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 05/15] ARM: at91: dts: extend, don't create anew, pinctrl node
Date: Thu, 18 Jun 2020 11:10:52 +0200 [thread overview]
Message-ID: <20200618091102.30150-6-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20200618091102.30150-1-a.fatoum@pengutronix.de>
The pinctrl device is also on the APB in the base device tree. The
barebox device tree wrongly creates a new one top-level under /.
Move it to the correct location, so the upstream node is extended.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/arm/dts/at91sam9263ek.dts | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/at91sam9263ek.dts b/arch/arm/dts/at91sam9263ek.dts
index 7fe283ced768..37f895d6ca73 100644
--- a/arch/arm/dts/at91sam9263ek.dts
+++ b/arch/arm/dts/at91sam9263ek.dts
@@ -24,15 +24,14 @@
wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
};
};
- };
- };
-
- pinctrl@fffff200 {
- pinctrl_board_mmc1: mmc1-board {
- atmel,pins =
- <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */
- AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */
+ pinctrl@fffff200 {
+ pinctrl_board_mmc1: mmc1-board {
+ atmel,pins =
+ <AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PE18 gpio CD pin pull up and deglitch */
+ AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PE19 gpio WP pin pull up */
+ };
+ };
};
};
};
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-06-18 9:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-18 9:10 [PATCH 00/15] ARM: dts: fix regressions from not using phandles Ahmad Fatoum
2020-06-18 9:10 ` [PATCH 01/15] ARM: i.MX50: fix renamed node reference Ahmad Fatoum
2020-06-18 9:10 ` [PATCH 02/15] ARM: dts: fix now duplicate memory nodes Ahmad Fatoum
2020-06-18 9:10 ` [PATCH 03/15] ARM: dts: align all applicable memory nodes with spec and convention Ahmad Fatoum
2020-06-18 13:59 ` Sascha Hauer
2020-06-18 9:10 ` [PATCH 04/15] ARM: vexpress: dts: fix barebox partitioning breakage Ahmad Fatoum
2020-06-18 9:10 ` Ahmad Fatoum [this message]
2020-06-18 9:10 ` [PATCH 06/15] ARM: dts: reference nodes to extend by phandles instead Ahmad Fatoum
2020-06-18 9:10 ` [PATCH 07/15] ARM: i.MX7: warp: drop duplicate memory node Ahmad Fatoum
2020-06-18 9:10 ` [PATCH 08/15] ARM: mvebu: remove reference to non-existant node Ahmad Fatoum
2020-06-18 9:10 ` [PATCH 09/15] ARM: i.MX6UL: dts: remove defunct override of pico-hobbit memory node Ahmad Fatoum
2020-06-18 9:15 ` Michael Grzeschik
2020-06-18 9:10 ` [PATCH 10/15] ARM: layerscape: dts: combine fsl-ls1046a-rdb.dts aliases nodes Ahmad Fatoum
2020-06-18 9:10 ` [PATCH 11/15] ARM: i.MX7: dts: replace commented-out code with status = "disabled" Ahmad Fatoum
2020-06-18 9:10 ` [PATCH 12/15] ARM: i.MX: mx53-qsrb: dts: remove now-superfluous override Ahmad Fatoum
2020-06-18 9:11 ` [PATCH 13/15] ARM: zynqmp: dts: drop now superfluous zynqmp.dtsi Ahmad Fatoum
2020-06-18 9:11 ` [PATCH 14/15] ARM: socfpga: dts: remove unused nodes and phandles Ahmad Fatoum
2020-06-18 9:11 ` [PATCH 15/15] Documentation: devicetree: codify extension of upstream DTS by phandles Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200618091102.30150-6-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox