From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 19/20] ARM: i.MX8MP: Add ocotp support
Date: Tue, 23 Jun 2020 15:16:05 +0200 [thread overview]
Message-ID: <20200623131606.16316-20-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200623131606.16316-1-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/nvmem/ocotp.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/nvmem/ocotp.c b/drivers/nvmem/ocotp.c
index 34e33dee82..62f510785b 100644
--- a/drivers/nvmem/ocotp.c
+++ b/drivers/nvmem/ocotp.c
@@ -728,6 +728,14 @@ static struct imx_ocotp_data vf610_ocotp_data = {
.format_mac = vf610_ocotp_format_mac,
};
+static struct imx_ocotp_data imx8mp_ocotp_data = {
+ .num_regs = 1024,
+ .addr_to_offset = imx6sl_addr_to_offset,
+ .mac_offsets_num = 2,
+ .mac_offsets = { 0x90, 0x96 },
+ .format_mac = imx_ocotp_format_mac,
+};
+
static struct imx_ocotp_data imx8mq_ocotp_data = {
.num_regs = 2048,
.addr_to_offset = imx6sl_addr_to_offset,
@@ -752,6 +760,9 @@ static __maybe_unused struct of_device_id imx_ocotp_dt_ids[] = {
}, {
.compatible = "fsl,imx6ull-ocotp",
.data = &imx6ull_ocotp_data,
+ }, {
+ .compatible = "fsl,imx8mp-ocotp",
+ .data = &imx8mp_ocotp_data,
}, {
.compatible = "fsl,imx8mq-ocotp",
.data = &imx8mq_ocotp_data,
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-06-23 13:16 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-23 13:15 [PATCH 00/20] i.MX8MP support Sascha Hauer
2020-06-23 13:15 ` [PATCH 01/20] scripts: imx-image: Only set DCD pointer when we have DCD data Sascha Hauer
2020-06-23 13:15 ` [PATCH 02/20] scripts: imx-image: exit on read/write failures Sascha Hauer
2020-06-23 13:15 ` [PATCH 03/20] scripts: imx-image: Add extra code path for i.MX35 Sascha Hauer
2020-06-23 13:15 ` [PATCH 04/20] scripts: imx-image: exit with error when barebox header conflicts with IVT Sascha Hauer
2020-06-23 13:15 ` [PATCH 05/20] scripts: imx-image: Fix writing image with IVT offset = 0 Sascha Hauer
2020-06-23 13:15 ` [PATCH 06/20] scripts: imx-image: rename image_dcd_offset to image_ivt_offset Sascha Hauer
2020-06-23 13:15 ` [PATCH 07/20] scripts: imx-image: rename dcdofs to ivtofs Sascha Hauer
2020-06-23 13:15 ` [PATCH 08/20] serial: i.MX: Add i.MX8MP compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 09/20] pinctrl: imx-iomux-v3: " Sascha Hauer
2020-06-23 13:15 ` [PATCH 10/20] net: fec_imx: add fsl,imx8mp-fec compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 11/20] mci: imx-esdhc: Add i.MX8mp compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 12/20] arm: imx: add initial imx8mp support Sascha Hauer
2020-06-23 13:15 ` [PATCH 13/20] scripts: imx-image: Add i.MX8MP support Sascha Hauer
2020-06-23 13:16 ` [PATCH 14/20] mfd: Add pca9440 register map Sascha Hauer
2020-06-23 13:16 ` [PATCH 15/20] clk: imx: Add imx8mp clk driver Sascha Hauer
2020-06-23 13:16 ` [PATCH 16/20] mci: imx-esdhc-pbl: Add imx8mp_esdhc_load_image() for i.MX8MP Sascha Hauer
2020-06-23 13:16 ` [PATCH 17/20] net: phy: realtek: handle RX delay setting Sascha Hauer
2020-06-23 13:16 ` [PATCH 18/20] ARM: i.MX: bbu: Fix IVT offset for i.MX8MP Sascha Hauer
2020-06-23 13:16 ` Sascha Hauer [this message]
2020-06-23 13:16 ` [PATCH 20/20] arm: boards: add initial imx8mp-evk support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200623131606.16316-20-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox