From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 02/20] scripts: imx-image: exit on read/write failures
Date: Tue, 23 Jun 2020 15:15:48 +0200 [thread overview]
Message-ID: <20200623131606.16316-3-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200623131606.16316-1-s.hauer@pengutronix.de>
When xread/xwrite fails the caller bails out of the program with an
error. We can drop all the error handling by letting xread/xwrite
call exit() themselves.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
scripts/imx/imx-image.c | 77 ++++++++++++-----------------------------
1 file changed, 23 insertions(+), 54 deletions(-)
diff --git a/scripts/imx/imx-image.c b/scripts/imx/imx-image.c
index 2481ae6403..04c707cb7f 100644
--- a/scripts/imx/imx-image.c
+++ b/scripts/imx/imx-image.c
@@ -445,41 +445,42 @@ static int write_mem_v2(uint32_t addr, uint32_t val, int width, int set_bits, in
return 0;
}
-static int xread(int fd, void *buf, int len)
+static void xread(int fd, void *buf, int len)
{
int ret;
while (len) {
ret = read(fd, buf, len);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ fprintf(stderr, "read failed: %s\n", strerror(errno));
+ exit(1);
+ }
+
if (!ret)
- return EOF;
+ return;
buf += ret;
len -= ret;
}
-
- return 0;
}
-static int xwrite(int fd, void *buf, int len)
+static void xwrite(int fd, void *buf, int len)
{
int ret;
while (len) {
ret = write(fd, buf, len);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ fprintf(stderr, "write failed: %s\n", strerror(errno));
+ exit(1);
+ }
buf += ret;
len -= ret;
}
-
- return 0;
}
static void write_dcd(const char *outfile)
{
- int outfd, ret;
+ int outfd;
int dcdsize = curdcd * sizeof(uint32_t);
outfd = open(outfile, O_WRONLY | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR);
@@ -489,11 +490,7 @@ static void write_dcd(const char *outfile)
exit(1);
}
- ret = xwrite(outfd, dcdtable, dcdsize);
- if (ret < 0) {
- perror("write");
- exit(1);
- }
+ xwrite(outfd, dcdtable, dcdsize);
}
static int check(const struct config_data *data, uint32_t cmd, uint32_t addr,
@@ -692,11 +689,7 @@ static int hab_sign(struct config_data *data)
csf_space);
}
- ret = xread(fd, buf, s.st_size);
- if (ret < 0) {
- fprintf(stderr, "read failed: %s\n", strerror(errno));
- return -errno;
- }
+ xread(fd, buf, s.st_size);
/*
* For i.MX8M, write into the reserved CSF section
@@ -728,11 +721,7 @@ static int hab_sign(struct config_data *data)
}
}
- ret = xwrite(outfd, buf, csf_space);
- if (ret < 0) {
- fprintf(stderr, "write failed: %s\n", strerror(errno));
- return -errno;
- }
+ xwrite(outfd, buf, csf_space);
ret = close(outfd);
if (ret) {
@@ -992,42 +981,26 @@ int main(int argc, char *argv[])
header_copies = (data.cpu_type == IMX_CPU_IMX35) ? 2 : 1;
for (i = 0; i < header_copies; i++) {
- ret = xwrite(outfd, add_barebox_header ? bb_header : buf,
- sizeof_bb_header);
- if (ret < 0) {
- perror("write");
- exit(1);
- }
+ xwrite(outfd, add_barebox_header ? bb_header : buf,
+ sizeof_bb_header);
if (lseek(outfd, data.header_gap, SEEK_CUR) < 0) {
perror("lseek");
exit(1);
}
- ret = xwrite(outfd, buf + sizeof_bb_header,
- header_len - sizeof_bb_header);
- if (ret < 0) {
- perror("write");
- exit(1);
- }
+ xwrite(outfd, buf + sizeof_bb_header,
+ header_len - sizeof_bb_header);
}
- ret = xwrite(outfd, infile, insize);
- if (ret) {
- perror("write");
- exit(1);
- }
+ xwrite(outfd, infile, insize);
/* pad until next 4k boundary */
now = 4096 - (insize % 4096);
if (data.csf && now) {
memset(buf, 0x5a, now);
- ret = xwrite(outfd, buf, now);
- if (ret) {
- perror("write");
- exit(1);
- }
+ xwrite(outfd, buf, now);
}
ret = close(outfd);
@@ -1056,11 +1029,7 @@ int main(int argc, char *argv[])
exit(1);
}
- ret = xwrite(outfd, infile, insize);
- if (ret < 0) {
- perror("write");
- exit (1);
- }
+ xwrite(outfd, infile, insize);
close(outfd);
}
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-06-23 13:16 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-23 13:15 [PATCH 00/20] i.MX8MP support Sascha Hauer
2020-06-23 13:15 ` [PATCH 01/20] scripts: imx-image: Only set DCD pointer when we have DCD data Sascha Hauer
2020-06-23 13:15 ` Sascha Hauer [this message]
2020-06-23 13:15 ` [PATCH 03/20] scripts: imx-image: Add extra code path for i.MX35 Sascha Hauer
2020-06-23 13:15 ` [PATCH 04/20] scripts: imx-image: exit with error when barebox header conflicts with IVT Sascha Hauer
2020-06-23 13:15 ` [PATCH 05/20] scripts: imx-image: Fix writing image with IVT offset = 0 Sascha Hauer
2020-06-23 13:15 ` [PATCH 06/20] scripts: imx-image: rename image_dcd_offset to image_ivt_offset Sascha Hauer
2020-06-23 13:15 ` [PATCH 07/20] scripts: imx-image: rename dcdofs to ivtofs Sascha Hauer
2020-06-23 13:15 ` [PATCH 08/20] serial: i.MX: Add i.MX8MP compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 09/20] pinctrl: imx-iomux-v3: " Sascha Hauer
2020-06-23 13:15 ` [PATCH 10/20] net: fec_imx: add fsl,imx8mp-fec compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 11/20] mci: imx-esdhc: Add i.MX8mp compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 12/20] arm: imx: add initial imx8mp support Sascha Hauer
2020-06-23 13:15 ` [PATCH 13/20] scripts: imx-image: Add i.MX8MP support Sascha Hauer
2020-06-23 13:16 ` [PATCH 14/20] mfd: Add pca9440 register map Sascha Hauer
2020-06-23 13:16 ` [PATCH 15/20] clk: imx: Add imx8mp clk driver Sascha Hauer
2020-06-23 13:16 ` [PATCH 16/20] mci: imx-esdhc-pbl: Add imx8mp_esdhc_load_image() for i.MX8MP Sascha Hauer
2020-06-23 13:16 ` [PATCH 17/20] net: phy: realtek: handle RX delay setting Sascha Hauer
2020-06-23 13:16 ` [PATCH 18/20] ARM: i.MX: bbu: Fix IVT offset for i.MX8MP Sascha Hauer
2020-06-23 13:16 ` [PATCH 19/20] ARM: i.MX8MP: Add ocotp support Sascha Hauer
2020-06-23 13:16 ` [PATCH 20/20] arm: boards: add initial imx8mp-evk support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200623131606.16316-3-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox