mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 03/20] scripts: imx-image: Add extra code path for i.MX35
Date: Tue, 23 Jun 2020 15:15:49 +0200	[thread overview]
Message-ID: <20200623131606.16316-4-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200623131606.16316-1-s.hauer@pengutronix.de>

The i.MX35 writes two copies of the header at the beginning of the
image. This is written in a loop right now. Make the i.MX35 an extra
code path so that it is out of the way for the changes in the next
patches.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 scripts/imx/imx-image.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/scripts/imx/imx-image.c b/scripts/imx/imx-image.c
index 04c707cb7f..edff3580dd 100644
--- a/scripts/imx/imx-image.c
+++ b/scripts/imx/imx-image.c
@@ -781,7 +781,6 @@ int main(int argc, char *argv[])
 	int outfd;
 	int dcd_only = 0;
 	int now = 0;
-	int i, header_copies;
 	int add_barebox_header;
 	uint32_t barebox_image_size = 0;
 	struct config_data data = {
@@ -978,9 +977,13 @@ int main(int argc, char *argv[])
 		exit(1);
 	}
 
-	header_copies = (data.cpu_type == IMX_CPU_IMX35) ? 2 : 1;
-
-	for (i = 0; i < header_copies; i++) {
+	if (data.cpu_type == IMX_CPU_IMX35) {
+		xwrite(outfd, add_barebox_header ? bb_header : buf,
+		       sizeof_bb_header);
+		xwrite(outfd, buf + sizeof_bb_header,
+		       header_len - sizeof_bb_header);
+		xwrite(outfd, buf, header_len);
+	} else {
 		xwrite(outfd, add_barebox_header ? bb_header : buf,
 		       sizeof_bb_header);
 
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2020-06-23 13:16 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-23 13:15 [PATCH 00/20] i.MX8MP support Sascha Hauer
2020-06-23 13:15 ` [PATCH 01/20] scripts: imx-image: Only set DCD pointer when we have DCD data Sascha Hauer
2020-06-23 13:15 ` [PATCH 02/20] scripts: imx-image: exit on read/write failures Sascha Hauer
2020-06-23 13:15 ` Sascha Hauer [this message]
2020-06-23 13:15 ` [PATCH 04/20] scripts: imx-image: exit with error when barebox header conflicts with IVT Sascha Hauer
2020-06-23 13:15 ` [PATCH 05/20] scripts: imx-image: Fix writing image with IVT offset = 0 Sascha Hauer
2020-06-23 13:15 ` [PATCH 06/20] scripts: imx-image: rename image_dcd_offset to image_ivt_offset Sascha Hauer
2020-06-23 13:15 ` [PATCH 07/20] scripts: imx-image: rename dcdofs to ivtofs Sascha Hauer
2020-06-23 13:15 ` [PATCH 08/20] serial: i.MX: Add i.MX8MP compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 09/20] pinctrl: imx-iomux-v3: " Sascha Hauer
2020-06-23 13:15 ` [PATCH 10/20] net: fec_imx: add fsl,imx8mp-fec compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 11/20] mci: imx-esdhc: Add i.MX8mp compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 12/20] arm: imx: add initial imx8mp support Sascha Hauer
2020-06-23 13:15 ` [PATCH 13/20] scripts: imx-image: Add i.MX8MP support Sascha Hauer
2020-06-23 13:16 ` [PATCH 14/20] mfd: Add pca9440 register map Sascha Hauer
2020-06-23 13:16 ` [PATCH 15/20] clk: imx: Add imx8mp clk driver Sascha Hauer
2020-06-23 13:16 ` [PATCH 16/20] mci: imx-esdhc-pbl: Add imx8mp_esdhc_load_image() for i.MX8MP Sascha Hauer
2020-06-23 13:16 ` [PATCH 17/20] net: phy: realtek: handle RX delay setting Sascha Hauer
2020-06-23 13:16 ` [PATCH 18/20] ARM: i.MX: bbu: Fix IVT offset for i.MX8MP Sascha Hauer
2020-06-23 13:16 ` [PATCH 19/20] ARM: i.MX8MP: Add ocotp support Sascha Hauer
2020-06-23 13:16 ` [PATCH 20/20] arm: boards: add initial imx8mp-evk support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200623131606.16316-4-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox