From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jqVDm-0004qp-2Y for barebox@lists.infradead.org; Wed, 01 Jul 2020 05:23:59 +0000 From: Ahmad Fatoum Date: Wed, 1 Jul 2020 07:23:19 +0200 Message-Id: <20200701052340.9462-8-a.fatoum@pengutronix.de> In-Reply-To: <20200701052340.9462-1-a.fatoum@pengutronix.de> References: <20200701052340.9462-1-a.fatoum@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 07/28] ARM: at91: import low level DDRAMC initialization code from at91bootstrap To: barebox@lists.infradead.org Cc: Ahmad Fatoum This commit imports DDRAMC initialization routines for use in PBL from https://github.com/linux4sam/at91bootstrap/blob/v3.8.12/driver/ddramc.c Signed-off-by: Ahmad Fatoum --- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/ddramc_ll.c | 507 +++++++++++++++++++++++ arch/arm/mach-at91/include/mach/ddramc.h | 36 ++ 3 files changed, 544 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-at91/ddramc_ll.c create mode 100644 arch/arm/mach-at91/include/mach/ddramc.h diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 863b62eddcd0..a7e9ce5938e8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -1,5 +1,5 @@ obj-y += setup.o -lwl-y += at91_pmc_ll.o +lwl-y += at91_pmc_ll.o ddramc_ll.o lwl-$(CONFIG_CLOCKSOURCE_ATMEL_PIT) += early_udelay.o ifeq ($(CONFIG_COMMON_CLK_OF_PROVIDER),) diff --git a/arch/arm/mach-at91/ddramc_ll.c b/arch/arm/mach-at91/ddramc_ll.c new file mode 100644 index 000000000000..4768fdcd6281 --- /dev/null +++ b/arch/arm/mach-at91/ddramc_ll.c @@ -0,0 +1,507 @@ +// SPDX-License-Identifier: BSD-1-Clause +/* + * Copyright (c) 2007, Stelian Pop + * Copyright (c) 2007 Lead Tech Design + */ + +#include +#include +#include +#include +#include + +void at91_ddram_initialize(void __iomem *base_address, + void __iomem *ram_address, + struct at91_ddramc_register *ddramc_config) +{ + unsigned long ba_offset; + unsigned long cr = 0; + + /* compute BA[] offset according to CR configuration */ + ba_offset = (ddramc_config->cr & AT91_DDRC2_NC) + 9; + if ((ddramc_config->cr & AT91_DDRC2_DECOD) == AT91_DDRC2_DECOD_SEQUENTIAL) + ba_offset += ((ddramc_config->cr & AT91_DDRC2_NR) >> 2) + 11; + + ba_offset += (ddramc_config->mdr & AT91_DDRC2_DBW) ? 1 : 2; + + /* + * Step 1: Program the memory device type into the Memory Device Register + */ + writel(ddramc_config->mdr, base_address + AT91_HDDRSDRC2_MDR); + + /* + * Step 2: Program the feature of DDR2-SDRAM device into + * the Timing Register, and into the Configuration Register + */ + writel(ddramc_config->cr, base_address + AT91_HDDRSDRC2_CR); + + writel(ddramc_config->t0pr, base_address + AT91_HDDRSDRC2_T0PR); + writel(ddramc_config->t1pr, base_address + AT91_HDDRSDRC2_T1PR); + writel(ddramc_config->t2pr, base_address + AT91_HDDRSDRC2_T2PR); + + /* + * Step 3: An NOP command is issued to the DDR2-SDRAM + */ + writel(AT91_DDRC2_MODE_NOP_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + /* Now, clocks which drive the DDR2-SDRAM device are enabled */ + + /* A minimum pause wait 200 us is provided to precede any signal toggle. + (6 core cycles per iteration, core is at 396MHz: min 13340 loops) */ + early_udelay(200); + + /* + * Step 4: An NOP command is issued to the DDR2-SDRAM + */ + writel(AT91_DDRC2_MODE_NOP_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + /* Now, CKE is driven high */ + /* wait 400 ns min */ + early_udelay(1); + + /* + * Step 5: An all banks precharge command is issued to the DDR2-SDRAM. + */ + writel(AT91_DDRC2_MODE_PRCGALL_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* wait 2 cycles min (of tCK) = 15 ns min */ + early_udelay(1); + + /* + * Step 6: An Extended Mode Register set(EMRS2) cycle is issued to chose between commercial or high + * temperature operations. + * Perform a write access to DDR2-SDRAM to acknowledge this command. + * The write address must be chosen so that BA[1] is set to 1 and BA[0] is set to 0. + */ + writel(AT91_DDRC2_MODE_EXT_LMR_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address + (0x2 << ba_offset)); + + /* wait 2 cycles min (of tCK) = 15 ns min */ + early_udelay(1); + + /* + * Step 7: An Extended Mode Register set(EMRS3) cycle is issued + * to set the Extended Mode Register to "0". + * Perform a write access to DDR2-SDRAM to acknowledge this command. + * The write address must be chosen so that BA[1] is set to 1 and BA[0] is set to 1. + */ + writel(AT91_DDRC2_MODE_EXT_LMR_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address + (0x3 << ba_offset)); + + /* wait 2 cycles min (of tCK) = 15 ns min */ + early_udelay(1); + + /* + * Step 8: An Extened Mode Register set(EMRS1) cycle is issued to enable DLL, + * and to program D.I.C(Output Driver Impedance Control) + * Perform a write access to DDR2-SDRAM to acknowledge this command. + * The write address must be chosen so that BA[1] is set to 0 and BA[0] is set to 1. + */ + writel(AT91_DDRC2_MODE_EXT_LMR_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address + (0x1 << ba_offset)); + + /* An additional 200 cycles of clock are required for locking DLL */ + early_udelay(1); + + /* + * Step 9: Program DLL field into the Configuration Register to high(Enable DLL reset) + */ + cr = readl(base_address + AT91_HDDRSDRC2_CR); + writel(cr | AT91_DDRC2_ENABLE_RESET_DLL, base_address + AT91_HDDRSDRC2_CR); + + /* + * Step 10: A Mode Register set(MRS) cycle is issied to reset DLL. + * Perform a write access to DDR2-SDRAM to acknowledge this command. + * The write address must be chosen so that BA[1:0] bits are set to 0. + */ + writel(AT91_DDRC2_MODE_LMR_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address + (0x0 << ba_offset)); + + /* wait 2 cycles min (of tCK) = 15 ns min */ + early_udelay(1); + + /* + * Step 11: An all banks precharge command is issued to the DDR2-SDRAM. + */ + writel(AT91_DDRC2_MODE_PRCGALL_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* wait 400 ns min (not needed on certain DDR2 devices) */ + early_udelay(1); + + /* + * Step 12: Two auto-refresh (CBR) cycles are provided. + * Program the auto refresh command (CBR) into the Mode Register. + */ + writel(AT91_DDRC2_MODE_RFSH_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* wait TRFC cycles min (135 ns min) extended to 400 ns */ + early_udelay(1); + + /* Set 2nd CBR */ + writel(AT91_DDRC2_MODE_RFSH_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* wait TRFC cycles min (135 ns min) extended to 400 ns */ + early_udelay(1); + + /* + * Step 13: Program DLL field into the Configuration Register to low(Disable DLL reset). + */ + cr = readl(base_address + AT91_HDDRSDRC2_CR); + writel(cr & ~AT91_DDRC2_ENABLE_RESET_DLL, base_address + AT91_HDDRSDRC2_CR); + + /* + * Step 14: A Mode Register set (MRS) cycle is issued to program + * the parameters of the DDR2-SDRAM devices, in particular CAS latency, + * burst length and to disable DDL reset. + * Perform a write access to DDR2-SDRAM to acknowledge this command. + * The write address must be chosen so that BA[1:0] bits are set to 0. + */ + writel(AT91_DDRC2_MODE_LMR_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address + (0x0 << ba_offset)); + + /* wait 2 cycles min (of tCK) = 15 ns min */ + early_udelay(1); + + /* + * Step 15: Program OCD field into the Configuration Register + * to high (OCD calibration default). + */ + cr = readl(base_address + AT91_HDDRSDRC2_CR); + writel(cr | AT91_DDRC2_OCD_DEFAULT, base_address + AT91_HDDRSDRC2_CR); + + /* wait 2 cycles min (of tCK) = 15 ns min */ + early_udelay(1); + + /* + * Step 16: An Extended Mode Register set (EMRS1) cycle is issued to OCD default value. + * Perform a write access to DDR2-SDRAM to acknowledge this command. + * The write address must be chosen so that BA[1] is set to 0 and BA[0] is set to 1. + */ + writel(AT91_DDRC2_MODE_EXT_LMR_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address + (0x1 << ba_offset)); + + /* wait 2 cycles min (of tCK) = 15 ns min */ + early_udelay(1); + + /* + * Step 17: Program OCD field into the Configuration Register + * to low (OCD calibration mode exit). + */ + cr = readl(base_address + AT91_HDDRSDRC2_CR); + writel(cr & ~AT91_DDRC2_OCD_DEFAULT, base_address + AT91_HDDRSDRC2_CR); + + /* wait 2 cycles min (of tCK) = 15 ns min */ + early_udelay(1); + + /* + * Step 18: An Extended Mode Register set (EMRS1) cycle is issued to enable OCD exit. + * Perform a write access to DDR2-SDRAM to acknowledge this command. + * The write address must be chosen so that BA[1] is set to 0 and BA[0] is set to 1. + */ + writel(AT91_DDRC2_MODE_EXT_LMR_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address + (0x1 << ba_offset)); + + /* wait 2 cycles min (of tCK) = 15 ns min */ + early_udelay(1); + + /* + * Step 19: A Nornal mode command is provided. + */ + writel(AT91_DDRC2_MODE_NORMAL_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* + * Step 20: Perform a write access to any DDR2-SDRAM address + */ + writel(0, ram_address); + + /* + * Step 21: Write the refresh rate into the count field in the Refresh Timer register. + */ + writel(ddramc_config->rtr, base_address + AT91_HDDRSDRC2_RTR); + + /* + * Now we are ready to work on the DDRSDR + * wait for end of calibration + */ + early_udelay(10); +} + +/* This initialization sequence is sama5d3 and sama5d4 LP-DDR2 specific */ + +void at91_lpddr2_sdram_initialize(void __iomem *base_address, + void __iomem *ram_address, + struct at91_ddramc_register *ddramc_config) +{ + unsigned long reg; + + writel(ddramc_config->lpddr2_lpr, base_address + AT91_MPDDRC_LPDDR2_LPR); + + writel(ddramc_config->tim_calr, base_address + AT91_MPDDRC_LPDDR2_TIM_CAL); + + /* + * Step 1: Program the memory device type. + */ + writel(ddramc_config->mdr, base_address + AT91_HDDRSDRC2_MDR); + + /* + * Step 2: Program the feature of the low-power DDR2-SDRAM device. + */ + writel(ddramc_config->cr, base_address + AT91_HDDRSDRC2_CR); + + writel(ddramc_config->t0pr, base_address + AT91_HDDRSDRC2_T0PR); + writel(ddramc_config->t1pr, base_address + AT91_HDDRSDRC2_T1PR); + writel(ddramc_config->t2pr, base_address + AT91_HDDRSDRC2_T2PR); + + /* + * Step 3: A NOP command is issued to the low-power DDR2-SDRAM. + */ + writel(AT91_DDRC2_MODE_NOP_CMD, base_address + AT91_HDDRSDRC2_MR); + + /* + * Step 3bis: Add memory barrier then Perform a write access to + * any low-power DDR2-SDRAM address to acknowledge the command. + */ + dmb(); + writel(0, ram_address); + + /* + * Step 4: A pause of at least 100 ns must be observed before + * a single toggle. + */ + early_udelay(1); + + /* + * Step 5: A NOP command is issued to the low-power DDR2-SDRAM. + */ + writel(AT91_DDRC2_MODE_NOP_CMD, base_address + AT91_HDDRSDRC2_MR); + dmb(); + writel(0, ram_address); + + /* + * Step 6: A pause of at least 200 us must be observed before a Reset + * Command. + */ + early_udelay(200); + + /* + * Step 7: A Reset command is issued to the low-power DDR2-SDRAM. + */ + writel(AT91_DDRC2_MRS(63) | AT91_DDRC2_MODE_LPDDR2_CMD, + base_address + AT91_HDDRSDRC2_MR); + dmb(); + writel(0, ram_address); + + /* + * Step 8: A pause of at least tINIT5 must be observed before issuing + * any commands. + */ + early_udelay(1); + + /* + * Step 9: A Calibration command is issued to the low-power DDR2-SDRAM. + */ + reg = readl(base_address + AT91_HDDRSDRC2_CR); + reg &= ~AT91_DDRC2_ZQ; + reg |= AT91_DDRC2_ZQ_RESET; + writel(reg, base_address + AT91_HDDRSDRC2_CR); + + writel(AT91_DDRC2_MRS(10) | AT91_DDRC2_MODE_LPDDR2_CMD, + base_address + AT91_HDDRSDRC2_MR); + dmb(); + writel(0, ram_address); + + /* + * Step 9bis: The ZQ Calibration command is now issued. + * Program the type of calibration in the MPDDRC_CR: set the + * ZQ field to the SHORT value. + */ + reg = readl(base_address + AT91_HDDRSDRC2_CR); + reg &= ~AT91_DDRC2_ZQ; + reg |= AT91_DDRC2_ZQ_SHORT; + writel(reg, base_address + AT91_HDDRSDRC2_CR); + + /* + * Step 10: A Mode Register Write command with 1 to the MRS field + * is issued to the low-power DDR2-SDRAM. + */ + writel(AT91_DDRC2_MRS(1) | AT91_DDRC2_MODE_LPDDR2_CMD, + base_address + AT91_HDDRSDRC2_MR); + dmb(); + writel(0, ram_address); + + /* + * Step 11: A Mode Register Write command with 2 to the MRS field + * is issued to the low-power DDR2-SDRAM. + */ + writel(AT91_DDRC2_MRS(2) | AT91_DDRC2_MODE_LPDDR2_CMD, + base_address + AT91_HDDRSDRC2_MR); + dmb(); + writel(0, ram_address); + + /* + * Step 12: A Mode Register Write command with 3 to the MRS field + * is issued to the low-power DDR2-SDRAM. + */ + writel(AT91_DDRC2_MRS(3) | AT91_DDRC2_MODE_LPDDR2_CMD, + base_address + AT91_HDDRSDRC2_MR); + dmb(); + writel(0, ram_address); + + /* + * Step 13: A Mode Register Write command with 16 to the MRS field + * is issued to the low-power DDR2-SDRAM. + */ + writel(AT91_DDRC2_MRS(16) | AT91_DDRC2_MODE_LPDDR2_CMD, + base_address + AT91_HDDRSDRC2_MR); + dmb(); + writel(0, ram_address); + + /* + * Step 14: A Normal Mode command is provided. + */ + writel(AT91_DDRC2_MODE_NORMAL_CMD, base_address + AT91_HDDRSDRC2_MR); + dmb(); + writel(0, ram_address); + + /* + * Step 15: close the input buffers: error in documentation: no need. + */ + + /* + * Step 16: Write the refresh rate into the COUNT field in the MPDDRC + * Refresh Timer Register. + */ + writel(ddramc_config->rtr, base_address + AT91_HDDRSDRC2_RTR); + + /* + * Now configure the CAL MR4 register. + */ + writel(ddramc_config->cal_mr4r, base_address + AT91_MPDDRC_LPDDR2_CAL_MR4); +} + +void at91_lpddr1_sdram_initialize(void __iomem *base_address, + void __iomem *ram_address, + struct at91_ddramc_register *ddramc_config) +{ + unsigned long ba_offset; + + /* Compute BA[] offset according to CR configuration */ + ba_offset = (ddramc_config->cr & AT91_DDRC2_NC) + 8; + if (!(ddramc_config->cr & AT91_DDRC2_DECOD_INTERLEAVED)) + ba_offset += ((ddramc_config->cr & AT91_DDRC2_NR) >> 2) + 11; + + ba_offset += (ddramc_config->mdr & AT91_DDRC2_DBW) ? 1 : 2; + + /* + * Step 1: Program the memory device type in the MPDDRC Memory Device Register + */ + writel(ddramc_config->mdr, base_address + AT91_HDDRSDRC2_MDR); + + /* + * Step 2: Program the features of the low-power DDR1-SDRAM device + * in the MPDDRC Configuration Register and in the MPDDRC Timing + * Parameter 0 Register/MPDDRC Timing Parameter 1 Register. + */ + writel(ddramc_config->cr, base_address + AT91_HDDRSDRC2_CR); + + writel(ddramc_config->t0pr, base_address + AT91_HDDRSDRC2_T0PR); + writel(ddramc_config->t1pr, base_address + AT91_HDDRSDRC2_T1PR); + writel(ddramc_config->t2pr, base_address + AT91_HDDRSDRC2_T2PR); + + /* + * Step 3: Program Temperature Compensated Self-refresh (TCR), + * Partial Array Self-refresh (PASR) and Drive Strength (DS) parameters + * in the MPDDRC Low-power Register. + */ + writel(ddramc_config->lpr, base_address + AT91_HDDRSDRC2_LPR); + + /* + * Step 4: A NOP command is issued to the low-power DDR1-SDRAM. + * Program the NOP command in the MPDDRC Mode Register (MPDDRC_MR). + * The clocks which drive the low-power DDR1-SDRAM device + * are now enabled. + */ + writel(AT91_DDRC2_MODE_NOP_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* + * Step 5: A pause of at least 200 us must be observed before + * a signal toggle. + */ + early_udelay(200); + + /* + * Step 6: A NOP command is issued to the low-power DDR1-SDRAM. + * Program the NOP command in the MPDDRC_MR. calibration request is + * now made to the I/O pad. + */ + writel(AT91_DDRC2_MODE_NOP_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* + * Step 7: An All Banks Precharge command is issued + * to the low-power DDR1-SDRAM. + * Program All Banks Precharge command in the MPDDRC_MR. + */ + writel(AT91_DDRC2_MODE_PRCGALL_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* + * Step 8: Two auto-refresh (CBR) cycles are provided. + * Program the Auto Refresh command (CBR) in the MPDDRC_MR. + * The application must write a four to the MODE field + * in the MPDDRC_MR. Perform a write access to any low-power + * DDR1-SDRAM location twice to acknowledge these commands. + */ + writel(AT91_DDRC2_MODE_RFSH_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + writel(AT91_DDRC2_MODE_RFSH_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* + * Step 9: An Extended Mode Register Set (EMRS) cycle is issued to + * program the low-power DDR1-SDRAM parameters (TCSR, PASR, DS). + * The application must write a five to the MODE field in the MPDDRC_MR + * and perform a write access to the SDRAM to acknowledge this command. + * The write address must be chosen so that signal BA[1] is set to 1 + * and BA[0] is set to 0. + */ + writel(AT91_DDRC2_MODE_EXT_LMR_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address + (0x2 << ba_offset)); + + /* + * Step 10: A Mode Register Set (MRS) cycle is issued to program + * parameters of the low-power DDR1-SDRAM devices, in particular + * CAS latency. + * The application must write a three to the MODE field in the MPDDRC_MR + * and perform a write access to the SDRAM to acknowledge this command. + * The write address must be chosen so that signals BA[1:0] are set to 0. + */ + writel(AT91_DDRC2_MODE_LMR_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address + (0x0 << ba_offset)); + + /* + * Step 11: The application must enter Normal mode, write a zero + * to the MODE field in the MPDDRC_MR and perform a write access + * at any location in the SDRAM to acknowledge this command. + */ + writel(AT91_DDRC2_MODE_NORMAL_CMD, base_address + AT91_HDDRSDRC2_MR); + writel(0, ram_address); + + /* + * Step 12: Perform a write access to any low-power DDR1-SDRAM address. + */ + writel(0, ram_address); + + /* + * Step 14: Write the refresh rate into the COUNT field in the MPDDRC + * Refresh Timer Register (MPDDRC_RTR): + */ + writel(ddramc_config->rtr, base_address + AT91_HDDRSDRC2_RTR); +} diff --git a/arch/arm/mach-at91/include/mach/ddramc.h b/arch/arm/mach-at91/include/mach/ddramc.h new file mode 100644 index 000000000000..0b33afc21353 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/ddramc.h @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: BSD-1-Clause +/* + * Copyright (c) 2006, Atmel Corporation + */ +#ifndef __DDRAMC_H__ +#define __DDRAMC_H__ + +/* Note: reserved bits must always be zeroed */ +struct at91_ddramc_register { + unsigned long mdr; + unsigned long cr; + unsigned long rtr; + unsigned long t0pr; + unsigned long t1pr; + unsigned long t2pr; + unsigned long lpr; + unsigned long lpddr2_lpr; + unsigned long tim_calr; + unsigned long cal_mr4r; +}; + +void at91_ddram_initialize(void __iomem *base_address, + void __iomem *ram_address, + struct at91_ddramc_register *ddramc_config); + +void at91_lpddr2_sdram_initialize(void __iomem *base_address, + void __iomem *ram_address, + struct at91_ddramc_register *ddramc_config); + + +void at91_lpddr1_sdram_initialize(void __iomem *base_address, + void __iomem *ram_address, + struct at91_ddramc_register *ddramc_config); + + +#endif /* #ifndef __DDRAMC_H__ */ -- 2.27.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox