From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by casper.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jqYmT-0001G0-Ta for barebox@lists.infradead.org; Wed, 01 Jul 2020 09:11:53 +0000 From: Ahmad Fatoum Date: Wed, 1 Jul 2020 11:11:11 +0200 Message-Id: <20200701091122.3437-18-a.fatoum@pengutronix.de> In-Reply-To: <20200701091122.3437-1-a.fatoum@pengutronix.de> References: <20200701091122.3437-1-a.fatoum@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 17/28] mci: sdhci: atmel: extend driver for PBL usage To: barebox@lists.infradead.org Cc: Ahmad Fatoum The BootROM resets both the SD/MMC host controller and the pin controller, but the card itself remains in transfer mode. If we redo host-side setup, we can directly read new blocks off the card. Signed-off-by: Ahmad Fatoum --- drivers/mci/Kconfig | 4 + drivers/mci/Makefile | 1 + drivers/mci/atmel-sdhci-common.c | 3 + drivers/mci/atmel-sdhci-pbl.c | 128 +++++++++++++++++++++++++++++++ 4 files changed, 136 insertions(+) create mode 100644 drivers/mci/atmel-sdhci-pbl.c diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig index 6ae1e812528c..3026b25cadc9 100644 --- a/drivers/mci/Kconfig +++ b/drivers/mci/Kconfig @@ -187,3 +187,7 @@ endif config MCI_IMX_ESDHC_PBL bool select MCI_SDHCI + +config MCI_ATMEL_SDHCI_PBL + bool + select MCI_SDHCI diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile index 177483dcfba5..4a5363367476 100644 --- a/drivers/mci/Makefile +++ b/drivers/mci/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_MCI_ATMEL_SDHCI) += atmel-sdhci.o atmel-sdhci-common.o obj-$(CONFIG_MCI_BCM283X) += mci-bcm2835.o obj-$(CONFIG_MCI_BCM283X_SDHOST) += bcm2835-sdhost.o obj-$(CONFIG_MCI_DOVE) += dove-sdhci.o +pbl-$(CONFIG_MCI_ATMEL_SDHCI_PBL) += atmel-sdhci-pbl.o atmel-sdhci-common.o obj-$(CONFIG_MCI_IMX) += imx.o obj-$(CONFIG_MCI_IMX_ESDHC) += imx-esdhc.o imx-esdhc-common.o pbl-$(CONFIG_MCI_IMX_ESDHC_PBL) += imx-esdhc-pbl.o imx-esdhc-common.o diff --git a/drivers/mci/atmel-sdhci-common.c b/drivers/mci/atmel-sdhci-common.c index 1884f3836337..a83610c3d090 100644 --- a/drivers/mci/atmel-sdhci-common.c +++ b/drivers/mci/atmel-sdhci-common.c @@ -12,7 +12,10 @@ #include #include +#include + #ifdef __PBL__ +#define udelay early_udelay #undef dev_err #define dev_err(d, ...) pr_err(__VA_ARGS__) #undef dev_warn diff --git a/drivers/mci/atmel-sdhci-pbl.c b/drivers/mci/atmel-sdhci-pbl.c new file mode 100644 index 000000000000..626e4008fe85 --- /dev/null +++ b/drivers/mci/atmel-sdhci-pbl.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: BSD-1-Clause +/* + * Copyright (c) 2015, Atmel Corporation + * Copyright (c) 2019, Ahmad Fatoum, Pengutronix + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + */ + +#include +#include +#include +#include +#include +#include "atmel-sdhci.h" + +#include + +#ifdef __PBL__ +#define udelay early_udelay +#endif + +#define SECTOR_SIZE 512 +#define SUPPORT_MAX_BLOCKS 16U + +struct at91_sdhci_priv { + struct at91_sdhci host; + bool highcapacity_card; +}; + +static int sd_cmd_stop_transmission(struct at91_sdhci_priv *priv) +{ + struct mci_cmd cmd = { + .cmdidx = MMC_CMD_STOP_TRANSMISSION, + .resp_type = MMC_RSP_R1b, + }; + + return at91_sdhci_send_command(&priv->host, &cmd, NULL); +} + +static int sd_cmd_read_multiple_block(struct at91_sdhci_priv *priv, + void *buf, + unsigned int start, + unsigned int block_count) +{ + u16 block_len = SECTOR_SIZE; + struct mci_data data; + struct mci_cmd cmd = { + .cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK, + .resp_type = MMC_RSP_R1, + .cmdarg = start, + }; + + if (!priv->highcapacity_card) + cmd.cmdarg *= block_len; + + data.dest = buf; + data.flags = MMC_DATA_READ; + data.blocksize = block_len; + data.blocks = block_count; + + return at91_sdhci_send_command(&priv->host, &cmd, &data); +} + +static int at91_sdhci_bio_read(struct pbl_bio *bio, off_t start, + void *buf, unsigned int nblocks) +{ + struct at91_sdhci_priv *priv = bio->priv; + unsigned int blocks_done = 0; + unsigned int blocks; + unsigned int block_len = SECTOR_SIZE; + unsigned int blocks_read; + int ret; + + /* + * Refer to the at91sam9g20 datasheet: + * Figure 35-10. Read Function Flow Diagram + */ + + while (blocks_done < nblocks) { + blocks = min(nblocks - blocks_done, SUPPORT_MAX_BLOCKS); + + blocks_read = sd_cmd_read_multiple_block(priv, buf, + start + blocks_done, + blocks); + + ret = sd_cmd_stop_transmission(priv); + if (ret) + return ret; + + blocks_done += blocks_read; + + if (blocks_read != blocks) + break; + + buf += blocks * block_len; + } + + return blocks_done; +} + +static struct at91_sdhci_priv atmel_sdcard; + +int at91_sdhci_bio_init(struct pbl_bio *bio, void __iomem *base) +{ + struct at91_sdhci_priv *priv = &atmel_sdcard; + struct at91_sdhci *host = &priv->host; + struct mci_ios ios = { .bus_width = MMC_BUS_WIDTH_1, .clock = 25000000 }; + int ret; + + bio->priv = priv; + bio->read = at91_sdhci_bio_read; + + at91_sdhci_mmio_init(host, base); + + sdhci_reset(&host->sdhci, SDHCI_RESET_CMD | SDHCI_RESET_DATA); + + ret = at91_sdhci_init(host, 240000000, true, true); + if (ret) + return ret; + + ret = at91_sdhci_set_ios(host, &ios); + + // FIXME can we determine this without leaving SD transfer mode? + priv->highcapacity_card = 1; + + return 0; +} -- 2.27.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox