Hello Andrey, On Tue, May 19, 2020 at 09:49:36PM +0200, Uwe Kleine-König wrote: > On Tue, May 19, 2020 at 06:37:33PM +0200, Uwe Kleine-König wrote: > > This adapts all files that were identifed by licensecheck > > (https://salsa.debian.org/build-common-team/licensecheck.git) as > > licensed under the GPL. > > > > The advantage is that these specifiers are machine-parseable which helps > > license conformance, e.g. for packaging barebox in Debian. > > > > While touching these files also do some minor comment reformatting to > > get some uniform layout. > > While going once more through this patch I noticed that there are a few > hunks that might be questionable and it would be great if you could > comment: > > > diff --git a/arch/arm/boards/freescale-mx7-sabresd/board.c b/arch/arm/boards/freescale-mx7-sabresd/board.c > > index 37941efdbeb4..e41d67017fe5 100644 > > --- a/arch/arm/boards/freescale-mx7-sabresd/board.c > > +++ b/arch/arm/boards/freescale-mx7-sabresd/board.c > > @@ -1,17 +1,7 @@ > > -/* > > - * Copyright (C) 2017 Zodiac Inflight Innovation > > - * Author: Andrey Smirnov > > - * > > - * This program is free software; you can redistribute it and/or > > - * modify it under the terms of the GNU General Public License as > > - * published by the Free Software Foundation; either version 2 of > > - * the License, or (at your option) any later version. > > - * > > - * This program is distributed in the hope that it will be useful, > > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > - * GNU General Public License for more details. > > - */ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > +// SPDX-FileCopyrightText: 2017 Zodiac Inflight Innovation > > + > > +/* Author: Andrey Smirnov */ > > > > #include > > #include > > Is this right? I.e does Zodiac hold the copyright and you are "only" the > author? Or would > > // SPDX-FileCopyrightText: 2017 Andrey Smirnov , Zodiac Inflight Innovation > > be more appropriate? > > Same question for > > arch/arm/boards/zii-imx6q-rdu2/board.c > arch/arm/boards/zii-imx6q-rdu2/lowlevel.c > arch/arm/boards/zii-vf610-dev/board.c > arch/arm/boards/zii-vf610-dev/lowlevel.c While going further through the barebox source tree there are more files with this info. Last I found was arch/arm/cpu/no-mmu.c Would be really great to get some input from you on this. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |