From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jr1HJ-0008Py-G0 for barebox@lists.infradead.org; Thu, 02 Jul 2020 15:37:34 +0000 From: Ahmad Fatoum Date: Thu, 2 Jul 2020 17:37:30 +0200 Message-Id: <20200702153730.24883-1-a.fatoum@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH] ARM: stm32mp: depend on ARCH_STM32MP for SoC drivers To: barebox@lists.infradead.org Cc: Ahmad Fatoum The i2c, MCI and reset controller peripherals are STM32-specific. There is no reason to ask uses on oldconfig about it, thus make them depend on ARCH_STM32MP || COMPILE_TEST. Signed-off-by: Ahmad Fatoum --- drivers/i2c/busses/Kconfig | 1 + drivers/mci/Kconfig | 1 + drivers/reset/Kconfig | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 21d2cb21cf5a..3bc8d1b8d2bc 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -59,5 +59,6 @@ config I2C_STM32 bool "STM32 I2C master driver" select RESET_CONTROLLER depends on HAVE_CLK + depends on ARCH_STM32MP || COMPILE_TEST endmenu diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig index 6ae1e812528c..d1695c678c30 100644 --- a/drivers/mci/Kconfig +++ b/drivers/mci/Kconfig @@ -177,6 +177,7 @@ config MCI_STM32_SDMMC2 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support" depends on ARM_AMBA depends on RESET_CONTROLLER + depends on ARCH_STM32MP || COMPILE_TEST help This selects support for the SD/MMC controller on STM32H7 SoCs. If you have a board based on such a SoC and with a SD/MMC slot, diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 9befc5e55f32..316ece9e7176 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -23,6 +23,7 @@ config RESET_IMX7 config RESET_STM32 bool "STM32 Reset Driver" + depends on ARCH_STM32MP || COMPILE_TEST help This enables the reset controller driver for STM32MP and STM32 MCUs. -- 2.27.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox