From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH] fixup! ARM: at91: sama5d27-som1: add additional first stage entry point
Date: Mon, 6 Jul 2020 08:22:21 +0200 [thread overview]
Message-ID: <20200706062221.14811-1-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20200701091122.3437-24-a.fatoum@pengutronix.de>
putc_ll() is already behind a IS_ENABLED(CONFIG_DEBUG_LL), so no need to
replicate.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/arm/boards/sama5d27-som1/lowlevel.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boards/sama5d27-som1/lowlevel.c b/arch/arm/boards/sama5d27-som1/lowlevel.c
index e9c781297c27..b0937119184b 100644
--- a/arch/arm/boards/sama5d27-som1/lowlevel.c
+++ b/arch/arm/boards/sama5d27-som1/lowlevel.c
@@ -45,8 +45,7 @@ SAMA5_ENTRY_FUNCTION(start_sama5d27_som1_ek_xload_mmc, r4)
sama5d2_lowlevel_init();
dbgu_base = sama5d2_resetup_uart_console(MASTER_CLOCK);
- if (IS_ENABLED(CONFIG_DEBUG_LL))
- putc_ll('>');
+ putc_ll('>');
relocate_to_current_adr();
setup_c();
@@ -65,8 +64,7 @@ SAMA5_ENTRY_FUNCTION(start_sama5d27_som1_ek, r4)
{
void *fdt;
- if (IS_ENABLED(CONFIG_DEBUG_LL))
- putc_ll('>');
+ putc_ll('>');
fdt = __dtb_z_at91_sama5d27_som1_ek_start + get_runtime_offset();
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-07-06 6:22 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-01 9:10 [PATCH RESEND 00/28] ARM: at91: add sama5d2 first stage support Ahmad Fatoum
2020-07-01 9:10 ` [PATCH 01/28] ARM: at91: remove <mach/hardware.h> include from assembly code Ahmad Fatoum
2020-07-01 9:10 ` [PATCH 02/28] ARM: at91: sama5d2: cast peripheral base addresses to __iomem pointers Ahmad Fatoum
2020-07-01 9:10 ` [PATCH 03/28] ARM: at91: import at91bootstrap's at91_ddrsdrc.h Ahmad Fatoum
2020-07-01 9:10 ` [PATCH 04/28] ARM: at91: migrate at91sam9_ddrsdr.h to use " Ahmad Fatoum
2020-07-01 9:10 ` [PATCH 05/28] ARM: at91: replace at91sam9_ddrsdr.h with " Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 06/28] ARM: at91: import early_udelay from at91bootstrap Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 07/28] ARM: at91: import low level DDRAMC initialization code " Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 08/28] ARM: at91: watchdog: implement at91_wdt_disable Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 09/28] watchdog: add support for at91sam9/sama5 watchdog Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 10/28] ARM: at91: implement sama5d2 lowlevel init Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 11/28] ARM: at91: sama5d2: add sama5d2 matrix configuration Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 12/28] ARM: at91: add sama5d2 cache init Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 13/28] ARM: at91: add necessary Advanced Interrupt Controller configuration Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 14/28] ARM: at91: extend low level PMC driver for generic clk support Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 15/28] pbl: add block I/O API Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 16/28] fs: fat: extend for in-PBL support Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 17/28] mci: sdhci: atmel: extend driver for PBL usage Ahmad Fatoum
2020-07-05 18:52 ` Sascha Hauer
2020-07-05 22:32 ` Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 18/28] ARM: at91: add code for sama5 boot source detection Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 19/28] ARM: at91: add helpers for chain-loading barebox from SD-card Ahmad Fatoum
2020-07-05 18:42 ` Sascha Hauer
2020-07-05 22:35 ` Ahmad Fatoum
2020-07-06 6:26 ` [PATCH] fixup! " Ahmad Fatoum
2020-07-09 14:19 ` [PATCH 19/28] " Sascha Hauer
2020-07-09 15:01 ` [PATCH v2] fixup! " Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 20/28] ARM: at91: sama5d2: reuse stack set-up by first stage Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 21/28] ARM: at91: debug_ll: remove duplicated IS_ENABLED(CONFIG_DEBUG_LL) condition Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 22/28] ARM: at91: sama5d2: reduce UART setup boilerplate with new helpers Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 23/28] ARM: at91: sama5d27-som1: add additional first stage entry point Ahmad Fatoum
2020-07-05 18:46 ` Sascha Hauer
2020-07-06 6:22 ` Ahmad Fatoum [this message]
2020-07-01 9:11 ` [PATCH 24/28] ARM: at91: sama5d2: read back memory size from DDRAM controller Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 25/28] ARM: at91: sama5d2: populate $bootsource and $bootsource_instance Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 26/28] ARM: at91: sama5d27-som1-ek: add barebox_update and multi environment support Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 27/28] ARM: at91: sama5d27-giantboard: add additional first stage entry point Ahmad Fatoum
2020-07-06 6:22 ` [PATCH] fixup! " Ahmad Fatoum
2020-07-01 9:11 ` [PATCH 28/28] ARM: at91: sama5d27-giantboard: add default environment/bbu Ahmad Fatoum
2020-07-11 5:13 ` [PATCH RESEND 00/28] ARM: at91: add sama5d2 first stage support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200706062221.14811-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox