From: yegorslists@googlemail.com
To: barebox@lists.infradead.org
Subject: [PATCH v2] arm: baltos: add environment node
Date: Fri, 17 Jul 2020 19:45:45 +0200 [thread overview]
Message-ID: <20200717174545.10200-1-yegorslists@googlemail.com> (raw)
From: Yegor Yefremov <yegorslists@googlemail.com>
Use the fourth SPL partition in NAND for environment storage.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
Changes:
v2: use the fourth SPL partition and a partition phandle
arch/arm/dts/am335x-baltos-minimal.dts | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/am335x-baltos-minimal.dts b/arch/arm/dts/am335x-baltos-minimal.dts
index 137c177b2..a57bb6c80 100644
--- a/arch/arm/dts/am335x-baltos-minimal.dts
+++ b/arch/arm/dts/am335x-baltos-minimal.dts
@@ -22,6 +22,11 @@
chosen {
stdout-path = &uart0;
+
+ environment-nand {
+ compatible = "barebox,environment";
+ device-path = &environment_nand;
+ };
};
cpus {
@@ -179,7 +184,7 @@
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
status = "okay";
- nand@0,0 {
+ nand: nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
@@ -226,8 +231,8 @@
label = "SPL.backup2";
reg = <0x40000 0x20000>;
};
- boot@60000 {
- label = "SPL.backup3";
+ environment_nand: boot@60000 {
+ label = "bareboxenv";
reg = <0x60000 0x20000>;
};
boot@80000 {
--
2.17.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2020-07-17 17:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-17 17:45 yegorslists [this message]
2020-08-10 19:48 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200717174545.10200-1-yegorslists@googlemail.com \
--to=yegorslists@googlemail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox